Windows XP - what is this BSOD code meaning? And how to solve?
BAD_POOL_CALLER * STOP: 0X000000C2 (0X00000CD4, 0X8175A2E8, 0 X 0000007, 0XB8A6B448)
The details of the error checking (double free) suggest memory corruption occurs. This may be due to a hardware failure (defective RAM, for example), or a bad/buggy driver or a driver that is not designed for the version of Windows you are using. Consider using driver verifier as described below, to determine which driver is corrupting the memory.
General to deal with the bluescreens indications:
Consider running chkdsk on all partitions. Leave complete chkdsk on each partition and see if that helps.
It may be useful to use the driver verifier. To activate the... Driver Verifier start-> verifier.exe-> OK-> create standard settings-> next-> driver select the names to a list-> next-> sort by provider-> select all other Microsoft drivers-> finish and OK your way out of the dialog box.
Then restart and use the system as you normally and wait for a problem. In case the system does not completely start after activation of the Verifier, boot mode safe and run driver verifier and tell him to remove the changes.
Wait for an error checking to happen after you have enabled the auditor as described and then download the dump on your SkyDriveand provide a link.
Also consider running SFC/scannow.
If you start in safe mode, do you still feel bugs? What if you do a clean boot, or boot device?
Consider the memory with memtest86 or Windows Memory Diagnostic test. Note that memory that pass the tests isn't necessarily good memory - he not only failed a review. Examine systematically to eliminate the system RAM - run with a few modules for awhile and see how things are going. Then try the other modules.
Other common suggestions include ensuring drivers are up to date, but also to ensure that you use the latest version of the BIOS.
Tags: Windows
Similar Questions
-
Creative cloud update, I get an error code 50 - what does this error code means?
Download and install an upgrade to creative cloud, I get an error code 50. I look for a list of error codes with no luck. Can someone tell me what this error code means and what is the solution? Thanks in advance.
Error 50 https://forums.adobe.com/thread/1432237 can help
-
I can't turn on Windows Defender, nor can I open it upwards. The error code that is displayed is 0x8800106ba. What does this code mean?
Hi, tonytiger34.
The usual solution to this error is to make sure that the service is automatic. Oferror message when you run Windows Defender: 'Error 0x800106ba Code' :
"To resolve this issue, follow these steps:
- Set the Windows Defender service on Automatic rather than Manual or disabled . To do this, follow these steps:
- Click StartThe collapse of this image enlarge this image
type services in the Start Search box, and then clickServices in the programs list.
The collapse of this image enlarge this imageIf you are prompted for an administrator password or for confirmation, type your password or clickcontinue .
- Double-click the Windows Defender service and then in the Startup type box, clickAutomatic .
- Click OK . »
- Click Start
If the automatic commissioning does not resolve the problem, try reinstalling Windows Defender. Note, however, if you have installed Microsoft Security Essentials, Windows Defender disabled installation because MSE includes anti-spyware protection.
Additional steps are available in the article referenced in the Knowledge Base. Please let us know how make you out.
Corrine, Microsoft MVP (consumer security)
My Blog: Security gardenThis announcement is in my opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS and is provided without warranty and not an entitlement.
- Set the Windows Defender service on Automatic rather than Manual or disabled . To do this, follow these steps:
-
What does this error code mean?
Exit code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DF027...
-------------------------------------- Summary --------------------------------------
-0 fatal Error (s), 1 Error (s)
-Payload: Adobe After Effects CS6 11.0.0.0 {4817D846-700B-474E-A31B-80892B3E92E3}.
ERROR: DF027: unable to copy the file from "/private/tmp/.tempdirNFYgwzLt/Assets1/universal/Professional/Adobe After /MOG/Frameworks/libxqilla.5.0.0.dylib CS6.app/Contents/Plug-ins/ effects (MediaCore)" to "/ Applications/Adobe After Effects CS6/Adobe After Effects CS6.app/Contents/Plug-ins/ (MediaCore) /MOG/Frameworks/libxqilla.5.0.0.dylib ' (Seq 2551)
-------------------------------------------------------------------------------------
«Exit code: 6, "" Exit Code: 7 "Installation error - see...»
http://helpx.Adobe.com/Creative-Suite/KB/errors-exit-code-6-exit.html
-
Error code: 0x80070426. -What this means and how can it be solved?
I have Dell laptop and I'm having a difficult time with a lot of things about Microsoft. I keep trying Windows Update 10 and it won't let me. I also tried to install applications or games store, and every time I put in my Microsoft account, it says
"Something happened and your purchase could not be completed. "Error code: 0x80070426.
I got this error again when I tried to change my Microsoft account and he said
"We're sorry, but something went wrong. Your account has not been changed to this account from Microsoft. "Code: 0x80070426.
Ive tried to do a new account of Microsoft and everything but nothing works and I don't know if it's making my computer and does not allow upgrade to Windows 10. Ive restarted, it, did a factory reset, wiped out all of the computer and still no luck.
I guess my main question is: what is this error code 0x80070426 and how can I solve this problem?
After that, how can I go do the update of Windows 10 completely rather than go through the whole process just to have a window pop up after a half hour saying 'Windows 10 update could not be completed.
Hello
You could try to create media to win 10 since a different website...
Then just run Windows...
You can try to install from the site... it does not require a Microsoft Account...
If you are creating media, you have it and not need to mess with downloading more...
-
I have a PC with Windows XP SP3... ecentlped recognizing my DVD/CDRW. I tried to download Windows Fixit and when I tried to run, I get the error code 0 x 80092003. -What this means and how can I solve this problem?
HP Pavilion a1410n PC with Windows XP Media Center edition. Sony Optiarc cddvdRW.
Hi J Mbanza,
-What is the link that you used to download the fix tool from?
error 0 x 80092003 which is an error reading or writing to a file.
Try to download from the link below and check.
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsThank you!
-
I have an old computer running windows 98 when I try to start until you get a date checking DMI Pool error message failure boot ATAPI CD-Rom 07,08 what this mean and how can I solve this problem?
I want to erase the hard drive and use it to install windows xp.
From what I've read, it could be a number of things that went on the wall. Issue of dead hard drive, BIOS, peripheral USB plugged when starting, etc.
Does not help, but could help to point you in the right direction...
-
I get the following "Windows - no disk Exception Message c0000013 processing error message
Parameters 75b6bf7c 4 75b6b7c 75b6b7c"can someone tell me what this means and how get rid of? Thank you!* UNPLUG ALL USB DEVICES AND NON-ESSENTIAL TO THE COMPUTERIf you can, I suggest that you try the following:
{THE PHASE 1}1. click on START2. click on "all programs".3. click on "Accessories".4. click on "system tools."5. click on "system restore."6 follow the prompts shown to restore your system to a date before the problem started. Although the system restore does not target the personal data, it is recommended that you back up all data such as music, photos and documents in case something is not bad.{THE PHASE 2}If this does not work, I could do this:Reach:Follow the instructions to download the version (diskette) indicated secondary. This will require a floppy disk. If you don't have one available, skip this step. Unfortunantly, given the age of this system, they do not offer executable for use within Windows automatic update.{THE PHASE 3}Reach:Download the patch and install it. Then, restart your computer.Reach:Download the patch and install it. Then, restart your computer.Let us know what happensThank you!Ryan Thieman
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
error code: 214750037 what does this mean and how do I? in the game adera
I was downloading DLC to adera and it downloads fine, but when it installs it said error of mapping content an unexpected error occurred during content acquisition. Please refer to the error code: 214750037 what does this mean and how do I?
I have the same problem with the second episode of the Adera. No change to my Surface either I have no antivirus running on this unit I just got this Friday.
-
Recently, when I turn on my computer is starts, guests of the computer and starts check my system files as follows: "checking file system on C: the Type of the file is NTFS. The Volume is dirty. "That is what this means and how can I clean and maintain the clean Volume, please? My computer is Dell XPS
The computer system continues and invite "CHKDSK checks the files (step 1 of 3)... .
The system deletes some files and at the end of shows, complete audit files and then show
CHLDSK is verifying indexes (stage 2 of 3)...
Once again, it shows the following:
Deleting Index Entry _64280 ~ 1. jpg in index file 4632 $130
Deleting Index Entry _64280552_little-mix_211112_get [1] .jpg in index file 4632 $130
Deleting Index Entry 69gw [1] .jpg in index file 6722 $130
Remove entries of Index 69 GW_1 ~ 1. jpg in index file 6722 $130
Deleting Index Entry _64274754_messi_211112_elvis [1] .jpg in index file 6722 $130
Deleting entry Index _64274 ~ 1. jpg in index file 6722 $130
Finished the index checking
CHKDSK is checking security descriptors (stage 3 of 3)...
100%
CHKDSK checks usn Journal...
Windows control disc is finished.
After all checks, Windows proceed to start as usual.
I would like to know if I need the dirty Volume, and if so, how can I carry out the cleaning operation.
Sometimes, at the early stage of the CHKDSK, the computer makes a pe. .. PE... noise and cut. Then I turn the computer off via the key of the insulation. When I restart the computer, it then runs the check again until the end.
Please advice me on the following points:
1 is this normal as he started only happening in recent weeks?
2. How can clean the Volume in order to show "Volume is clean instead of sale"
I look forward to hear from you.
Thank you
Hi, Dr.,
Volumes that contain file system errors are known as Sales. To indicate that a file system problem has occurred and that the volume is dirty, Windows XP Professional displays a message similar to the following when you try to open, delete, or rename a file or folder by using Microsoft Windows Explorer or the command prompt:
Autochk runs if the volume is marked as modified.
If the file system has marked the volume as dirty, Autochk runs the Startup Repair process. Volumes are marked as dirty, when the file system detects an error on the volume. If Autochk detects a dirty volume, it provides a delay of 10 seconds, and then starts the repair process. If you cancel Autochk when a volume is dirty, Autochk tries to run again after a 10 second delay every time the computer is restarted.
See Chkdsk for all the necessary explanations:
http://TechNet.Microsoft.com/en-us/library/bb457122.aspx
Run the Dell Diagnostics to check the drive failure. If the disc is a failure, it must be replaced.
-
I need to reload of Photoshop CS4 and I get the error: "License has stopped working" error message 6. -What this means and how can I solve this problem?
Hello
Please see error: "License has stopped working". Windows or error: "License has stopped working". Mac OS depending on the operating system you have.
Hope that helps!
Kind regards
Sheena
-
62/4MEM/40000000: 0X84321b98 what does this error message mean?
62/4MEM/40000000: 0X84321b98 what does this error message mean?
It of a memory error, what are you are having problems.
-
I get this message at startup ' 3rd Master Hard Disk:S.M.A.R.T. bad condition. " -What this means and how can I solve this problem?
SMART is a technology on newer computers that allows the computer to monitor the health of hard drives in your computer. Something happened to one of your readers that detects the smart as a problem, and she's trying to warn you proactively to this topic before it fails.
It may be also that you have installed a very old hard drive that does not support the CHIP and the monitor reports that it can not read the drive status.
So depending on your level of knowledge and experience, you can watch to replace the hard disk that is reported, or you can disable SMART followed to make the message disappears. The second option but then means if it is really a failure, it is likely any work stoppage or corrupted so data you do note to solve.
-
Original title: closed to stop forced mediacontextnotificationwindow
I'm having a problem with a 'program'... ? When shutting down my computer, Windows tries to close with force "Mediacontextnotificationwindow"... any idea on what it is and how to solve this problem?
Hello
1. have you made changes on the computer before this problem?
2. What is the exact message?Perform the clean boot may help you resolve this problem.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Reference:
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
a. click Startand then click run.
b. type msconfigand click OK.The System Configuration Utility dialog box appears.
c. click on the general tab, click Normal Startup - load all device drivers and services and then click OK.
d. When you are prompted, click on restart to restart the computer. -
When you try to turn on my computer which has windows vista, I get this error code '! 0 * c0190036! 535/95417 (explorer.exe)
Hello
-Remember to make changes to your computer, after which the issue started?
I would recommend that you follow these steps and check if the problem persists.
Step 1:
Start your computer in safe mode.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeStep 2:
If the computer starts in safe mode, there must be a third party software that is causing the problem to occur, this is why I suggest you put your computer in a clean boot state.How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: Put your computer in normal mode (step 7).Step 3:
If you haven't already done so, I would say doing a full scan on your system.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Maybe you are looking for
-
Firefox does not load CSS for the local Web site
Hello I know that you have all seen this issue before but none of the answers I have found work for me. My site loads perfectly fine in other browsers, but not Firefox. I have a local website with a style sheet which is saved in the same folder: < li
-
Close slowly in the night and slow start morning
I'm having this problem and does not know what it is. Slow closed at night and slow start in the morning and using the capture software and screen illustrated space left. I don't see how to repair disk permissions if it is my problem can anyone help
-
wanted to build a vi to simulate the hold on a Panel button.
Hello Were to simulate a press and hold on a Panel button to turn on the rest of the buttons on the Panel. Kind of extreme, used case Acquire of entry data, index table, structure (boolean), all in a while loop. No comments for this approach or any i
-
Kodak ESP C310 printer has stopped working
the printer displays a code 3533 (paper jam) I checked the printer several times and there is no paper jam. What can I do to fix this?
-
A disc is stuck in my laptop. When I press the eject button, it makes a sound but will not eject. Any suggestions? There is no hole and the Dell laptop is not a drawer