Windows XP, when the use of twitter can not play more error clips vid 'her browser doesn't support video playback', but if I take the Utube link can play w/browser

Similar Questions

• Twitter Firefox gives message 'browser doesn't support video playback' why?

  Windows XP

  I get a message like this as many times as I surf the web. More funny
  is, if I download the clip, she plays very well.

• How can I disable the mouse pad when you use a mouse plug-and-play?

  How can I disable the mouse pad when you use a mouse plug-and-play? I tried to disable the driver, and nothing works.

  Hello

  Check with support of the manufacturer system, documentation online or forums that there is probably
  Shortcut keys that enable and disable the touchpad functions.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Do I still need to run the Windows Firewall when I use Norton360?

  Do I still need to run the Windows Firewall when I use Norton360?

  Hello

   
  A firewall is software or hardware that checks information coming from the Internet or a network, then it blocks or allows it to pass through your computer, depending on your firewall settings.
  A firewall can help prevent hackers or malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers.
  A firewall is not the same thing as an antivirus program. To help protect your computer, you need a firewall and an antivirus and anti-malware program.
  
  Norton 360 from Symantec's all-in-one security service that protects your computer and your data against today's Internet threats.
   
  Norton 360 can be functioning as an antivirus, firewall, or offer according to your settings.
   
  We recommend that you only have an antivirus and a firewall on your computer, the choice of what antivirus or firewall is yours.

• In Windows 7, when I use the bridge it cannot locate libraries and images here?

  In Windows 7, when I use the bridge it cannot locate libraries and images here?

  Libraries in Windows7 and bridge 4.0.

• In numbers, I can't use then "/" operator to divide 2 cell, when I use may 7 does not appear "/", appear.

  In numbers, I can't use then ' / ' operator to divide 2 cell, when I use Shft + 7 does not appear "/", appear ' + '.

  Apple saw fit to replace the ' / ' with the Obelus ("÷") that often resembles a plus.  Look very carefully and you will see the point above and below the line.

  Also if you look at the result, 6/3 is 2 step 8 if the operator acted as the addition operator

• Satellite Pro 4600: when I use WEP, I can't do any connection more

  Hey everybody,

  When I connect my Tohsiba Satellite Pro 4600 via map of build-in network without WEP wireless to an AP, there is no problem, connection is establische and everything works fine.
  When I use WEP, I can't do any connection more.
  Is there a solution to use encryption WEP 128 bit on a portable Thosiba Pro 4600 with build-in WIFI network.

  Thanks in advance
  Pokettuk

  What card WLan do you use?

  As far as I know the laptop must be equipped with LAN Wireless / WiFi Standard: 802. 11B ORiNOCO Mini PCI card.
  This card supports WEP 64 or 128 RC4 security.

  Everything looks like you WLan card doesn't support the same standards of security as your WLan router. You must understand that this WLan card is an oldie about 7 years.

  I think that the best solution is to use external USB WLAN which support the latest encryption standards

  Good bye

• How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you reconnect then wireless.

  problems with wireless Vista "local only".

  How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you then reconnect wireless... nothing else was changed on those computers and other devices can connect ok?

  Hello

  Each router is assigned to the specific address (called IP address or IP address). And each router maintains its own database (called as base of router) to follow the networking devices communicate with him. When the router is changed, the particular router is unable to detect the device, especially the network card to communicate with the computer.  Since he does not have details of the database of network devices, communicate with him.

  • You are able to access the Internet?

  Try the steps mentioned below and check:

  Method 1:

  Step 1: Enable or disable a network adapter and then check:

  http://Windows.Microsoft.com/en-CA/Windows-Vista/enable-or-disable-a-network-adapter

  Step 2: Run Network Diagnostic tool and check:

  Network connection issues: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Method 2: Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Reference links:

  Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based: http://support.microsoft.com/kb/947041

  Setting up a wireless network: http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Connection to wireless with Windows Vista: http://technet.microsoft.com/en-us/library/bb878035.aspx

  Hope it works.

• Get the error when update: Office creative cloud could not be updated. (error code: 2)

  Get the error when update: Office creative cloud could not be updated. (error code: 2).

  I'm on a McBook Pro, OSX 10.9.5 retina.

  How to fix error Code: 2?

  Always the same?

  Follow the procedure below:

  Please follow the steps below:

  1)

  Click on the Finder and search options listed next to icon located Apple in the upper left of the screen and click on the "Go" menu button and select 'utilities '.

  (Applications > Utiliites)

  Look for a CC Adobe and Adobe Application Manager folder under utility window and trash both folders.

  2)

  Click on the link below and download & run the cleaning of Adobe tool:

  Select the option "Adobe Application Manager for Mac OS X 10.6" and then click on "Clean up selected."

  https://helpx.Adobe.com/content/help/en/Creative-Suite/KB/CS5-cleaner-tool-installation-PR oblems/_jcr_content/hand-Sea/accordion_container_1/accordion-nominal/accordion-point-1/agreement I on-item-par/procedure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleane r Tool.zip

  3) click on the link below and download file Creative Cloud install and use the same to install the creative Cloud Desktop application.

  https://creative.Adobe.com/products/creative-cloud

• Since then he move to Windows 7 pro, the shared link will open the program, but the database is not up to date.

  I have a .net programming when it was on XP pro it worked fine. Since moving to Windows 7 pro the shared link will open the program, but information is not updated, because it seems that she has created its own database with information from the local computer is installed on and is not matching the information. For example, if the local computer is mapped machine upon receipt #25 is the #15 and should be on #26 and showing all the other receipt printed by the local machine. but its starts from where it was stopped 2 days ago, and is not followed.

  OT: .mdb problem with WIN 7 pro

  Thanks for all the help, I need it!

  Hello

  The question you posted would be better suited to Windows 7 IT pro community.
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• I have already purchased windows 8, need the redownload link it

  I have already purchased windows 8, need the redownload link it

  Hello HussamOsman,

  Click link listed here if already have the product key of Windows 8. You don't have to buy Windows 8 again. The instructions in the link will allow to install Windows 8.

  I suggest create you a support if you have it if you need to reinstall. Also keep a copy of your product key in a safe place where you can access it again.

  Thank you

  Marilyn

• Update the Configuration failed on Windows Vista when the computer was closed prematurely at sea

  My son turned off the computer before the update of configuration was complete.  It uses a Compaq Vista premium desktop computer.  The operating system will not load (it is stuck in a loop trying to reconfigure the old settings before the update).  We have tried to start in Mode safe mode and do a system restore.  The first available date is November 15, when the update occurred.  System Restore got the point to finalize and then jammed (lasted at least 4 hours).   Any suggestions other than a complete system to recharge?

  Hi DRoggeman,

  Welcome to Microsoft Answers Community Forums.

  I suggest you to do the Startup Repair to fix boot of startup problem and uninstall all updates you have installed.

  Reinstall or install updates for your computer by going to http://windowsupdate.microsoft.com

  To perform the Startup Repair, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  1. Insert the installation disc.

  2. restart your computer.

  Click the Start button, click the arrow next to the lock button, and then click restart.

  3. If you are prompted, press any key to start Windows from the installation disc.

  Note

  If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  4. choose your language settings, and then click Next.

  5. click on repair your computer.

  6. Select the operating system you want to repair, and then click Next.

  7. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.

  For more information, please see the links below,

  ·          http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem Fixed a problem starting to boot.

  ·          http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions Frequently asked questions.

  Hope this information helps you.

  Kind regards

  Arona - Microsoft technical support engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Creation of DVD Windows closes when the file is moved to the work menu

  "try burning .avi files to dvd using create DVD windows and when I drag the file to the creation of dvd or even to open it manually through the import that it cancels and closes saying ' stopped working '.

  Hi emwercs,

  Follow the instructions below that may help you solve the problem of Windows DVD maker.

  Method 1:

  Create DVD Windows stops working due to incompatibility with one or several codec files that are obsolete or incompatible with the project or the DVD Maker software itself.

  (Obsolete or incompatible) Codec files must be located and renamed to resolve the issue.

  1. open the start menu and type event viewer in the start menu search bar. Open event viewer from the menu.
  2. in the case of Viewer click Windows logs in the left panel
  3. click on application under Windows Logs logs
  4. search for the error messages listed in the event viewer window Central Panel and double-click on the error to check if it log is linked to the creation of DVD.

  Example of error log:

  Signature of the problem
  Problem event name: APPCRASH
  Application name: DVDMaker.exe
  Application version: 6.0.6000.16386
  Application timestamp: 4549b5b0
  Fault Module name: nevideohd.ax
  Fault Module Version: 4.6.15.0
  Timestamp of Module error: 459bb828
  Exception code: c0000005
  Exception offset: 00008b 89
  OS version: 6.0.6000.2.0.0.256.1
  Locale ID: 1062

  5 locate the fault Module name, it must be a file with the extension or dll.
  6 once identified the name of the file, try to locate the file in the C:/Windows/System32 folder.
  (Please click on view the content if the files do not appear automatically).
  7. If the files are not listed in the System32 folder, find the file with search containing the files and system files.
  8 find the file and rename it.
  9. check if the problem persists. If the problem persists and the error message appears again, find the new file which is the origin of the problem of event, error log viewer.

  Method 2:

  You can also uninstall any third party burning programs and software of the codec of programs and features that these could cause the error.

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Backup cancelled in Windows 7 when the computer is turned off.

  I use Windows 7 Home Premium 64-bit operating system.

  Periodically, the Action Center will display a message saying that I have to do a backup, what I do before turning off the computer. However, when I reboot the computer, I discovered that the backup has been cancelled.

  I have searched the web but can't find information about how to make the computer shuts down automatically once the backup completed successfully.  Does anyone have a solution?

  The backup has been working in the past?

  Have you ever attempted an upgrade to Windows 10 and then back to Windows 7?

  For example let's say you have your backup scheduled task to run at midnight...

  If your computer is stopped at midnight, the backup does not - because the computer is stopped and the task was "missed" because the computer has been shut down.

  If you have the backup task configured on "Run as soon as possible after a regular departure was missed":

  

  When your computer working again missed backup task starts automatically.

  If you have your scheduled backup job to run at midnight and your computer is in "Sleep" mode, you have the task configured to wake the computer to run the backup:

  

  This won't work for wake up the computer if it is in "Sleep" mode  It will not work if the computer is in hibernation or if the computer is shut down.  As you can be awakened from sleep, the computer can be awakened from sleep, but you can't be awake if you're dead (stop).  You have to sleep to being awake.  You can be awake if you're dead or hibernation.

  The 'problem' with this approach is if the computer wakes up and runs the backup it will continue to function and you don't want that.   You can the computer to wake up, run the backup, and then click Stop (or to go back to sleep) when the backup is complete, and you can configure to occur in two different ways.  If that's how you think you want things to work ask the question in the right way, and describe how you want things to work.

  If your computer is in hibernation or stop the scheduled backup will not work until the computer working again and realizes that he has missed a task... then the backup will run - if you have the task set to do as the first example.

  Depending on certain factors that have nothing to do with Windows there are ways to make your computer start at a certain time of the hibernation or shutdown (mean 23:55) so it will be quick and then the backup will take place at midnight but will continue to operate your computer unless you include an additional step to stop the system again when the backup is complete.  These things are not exactly automatically built into Windows, but there might be ways to do things the way it works.  If that's how you think you want things to work ask the question in the right way, and describe how you want things to work.

  Find how to solve is often a matter of the question or stating the problem clearly there is no guess, no things difficult and none of these proceedings of the wild goose.

  What is the problem with the way your backup works now?

  What part doesn't work the way you think it should work?

  How do you think this should work?

  How it works?

  If your computer is turned off (off) do you want that it to wake up itself, run the backup and then stop when the backup he fill?  You can do it if you want, but it takes an extra effort and has a few requirements outside the Windows operating system.

  The task of the example above is set to run every Monday at 09:00.

  If my computer is running at 09:00 on Monday, the backup will start and run Monday at 09:00.

  If my computer doesn't work at 09:00 on Monday, the backup will run as soon as possible after the computer restart us and that's fine with me.

  I do not use sleep or Hibernate so I don't have to worry about how get the copy backup to run under these conditions.

• Windows crashes when you use any application and stops in hibernation mode

  Hello people who might be able to help me,

  I come back from summer vacation and turned on my computer with windows 7 at first all seemed fine until I wanted to open an application. Opening was always very well, but when I did something on this subject, it crashed. Also my PC then stops in the hibernation mode. I can access internet, but nothing else. Then I tried to recover my PC. It turns out I have no recovery points and can only restore factory mode that sucks. Now that was new, since always, before I could restore my PC to a previous session without making any restore points. What can I do to restore my PC and ban these errors?

  Hello Nicolas,.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1 did you receive no error message or code when the application or the system crashed?
  2. What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur because settings to corrupt, or because of the presence of unused files in Windows. This can also occur due to the presence of any virus or malware.

  I appreciate the fact that you want to restore your computer. However, until you do, I suggest you to try the following methods and check if it helps.

  Method 1:
  Resolution of performance problems and check.
  Reference:
  Open the troubleshooter of Performance
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Please also run convenience store power.
  Reference:
  Open the troubleshooter of power
  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  If this does not help, use method 2.

  Method 2:
  Microsoft safety scanner run and check the issue.
  Reference:
  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you