Windows7-64 memory is up by Metafile

Similar Questions

• S205 RAM/memory Test

  I was playing with my Ideapad S205 last week and found a place that allow me to make some sort of memory/RAM Test. I can't find a reason any. I checked the BIOS and other startup options, but I can't find it. Does anyone know what I mean? Where to find it?

  Thank you.

  Hello, CNMC

  The BIOS of S205 netbook has no memory test option.

  If you are using Windows 7, you can run "Memory diagnostic tool"

  Please refer to the cited web link below.

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

  Best regards

  Tanuj

• Memory problems and questions related to the process

  Does this look just for you, because the modified memory does little until after I had computer problems and had to do a factory reset

  The operating system is Windows 7 64-bit edition SP1

  I disabled SuperFetch is told by the way, if this help anyone on this issue.

  Resource monitor

  

  Windows process

  

  Services

  

  

  

  Performance

  

  Hello

  When your computer doesn't have enough memory for all the actions it is trying to perform, Windows and your programs can stop working. To help prevent information loss, Windows will inform you when your computer is low on memory. You can also learn to recognize the signs of low memory and take measures to prevent the problem. Insufficient memory problems occur when your computer is running out of RAM and becomes virtual memory. This can happen when you run more programs that the RAM memory installed on the computer is designed to support. Low-memory problems can also occur when a program free up memory that it needs more. This problem is called memory overuse or a memory leak.

  You can consult the following Microsoft articles and check if it helps.

  Diagnosing memory problems on your computer

  http://Windows.Microsoft.com/en-AU/Windows7/diagnosing-memory-problems-on-your-computer

  Prevention of problems of memory

  http://Windows.Microsoft.com/en-AU/Windows/preventing-low-memory-problems#1TC=Windows-7

  You may receive an "Out of Memory" error message because of the limitation of in Windows Vista or Windows 7 desktop heap

  http://support.Microsoft.com/kb/947246

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I hope this helps.

  Please post back with the State of the question and we will be happy to help you further.

• The instruction at 0x01764b69 referenced memory at 0x00000000. The memory could not be read. Click on OK to terminate the program.

  An error message "the instruction at 0x01764b69 referenced memory at 0x00000000. The memory could not be read. Click OK to terminate the program"appears when I turn off my computer. Could you please tell what is happening with my computer and how to fix it? Thank you.

  Hello

  You did changes to the computer before the show?

  Method 1:
  Run the fix it and check.
  Difficulty of Windows system performance slow computer problems
  http://support.Microsoft.com/mats/slow_windows_performance/en-us

  Method 2:
  Perform a clean boot and check if a third-party software is causing the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

  Method 3:
  You can diagnose disorders of memory on the computer
  by following the steps in the link.
  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

  Method 4:
  Run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  Method 5:
  If the above steps doesn't help you can run chkdsk from WinRE (Windows Recovery Environment) mode and look for the question.

  See the following link for more information about system recovery options.

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  See the section: to open the Options menu on your computer system recovery System Recovery Options

  Select the command line option. At the command prompt, type the following command and press ENTER:

  chkdsk drive: / r
  CHKDSK drive: / f

  CHKDSK warning:
  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Previous post: the results.

  Reference links:
  Ways to improve your computer's performance
  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance
  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Previous post: the results.

• find the real problem between memory and processor or beween food and virus!

  Hello

  In addition to the pieptones how you can know if the problem is with CPU or memory, how you can distinguish the problem if there is a real problem whith one of this material in two?

  just to know I took off the memory of my laptop and I saw the screen went black, I did the same thing with the processor, and it had the same sign as the dark memory screen.

  so my question is,

  1. How do I know when this two material is damaged one who is the origin of the problem whitout having any reserve memory by me? is there any tool material memory Tester?

  2. sometimes computer restarts every few minutes when there a supply or virus problem, how you can distinguish the problem if it is based on the power supply or a virus by the desktop computer whitout having any multimeter by you, is there a tool like a pen that you can measure the power supply of power or the volt?

  all good advise from the experience is welkom

  Thank you

  Johan

  If it's a failure of defective material, sometimes, you will get the BIOS beeps that can give clues to what's wrong - http://www.pchell.com/hardware/beepcodes.shtml

  There are testers of memory around like - http://windows.microsoft.com/en-US/windows7/Diagnosing-memory-problems-on-your-computer or see http://pcsupport.about.com/od/toolsofthetrade/tp/memorytest.htm

  defects of power supply - search the net for articles like http://www.techrepublic.com/article/learn-to-troubleshoot-power-supply-problems/ (there are many other tips) BUT PAY Attention when messing around with the power supply. Obvious care to avoid damage to the PC or worse, damaging yourself!

  viruses - there are many scanners available as http://www.malwarebytes.org/ if malware your PC is stable enough to run them. If your PC does not start there are scanners bootable, you can download it from a certain AV companies, you can start your PC and then from the scanner.

  NOTE: If you download software, download from a site deemed safe and always fully AV check on a system that works before you install or run - just to be sure.

• The memory could not be written the instruction at 0xf5e14843 referenced memory at 0xf5e14843.

  Original title:

  Task host error message

  I get this message on my laptop and reads "error Application Host task the instruction at 0xf5e14843 referenced memory at 0xf5e14843. The memory could not be written. Click OK to complete the program on stopping down.

  Hi John,.

  1. When exactly do you get the error message?
  2. Have you made changes on the computer before this problem?

  Memory could not be written can be caused by:

  • Faulty RAM.
  • Bad device drivers 'third' Party.
  • Too many apps, commissioning.

  Method 1:

  Diagnosing memory problems on your computer

  http://Windows.Microsoft.com/en-in/Windows7/diagnosing-memory-problems-on-your-computer

  Method 2:

  Try to review and remove the drivers 'doubtful '.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  Start your computer in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See How to solve a problem by performing a boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 3 in the above article.

  Please return to the State of the question.

• Windows 7 stops - Dell Studio XPS 7100 shows Advanced Pattern Memory Test failure - WME02-CIF.

  Unexpected stops of Windows 7 on my Dell Studio XPS 7100. Analysis of material shows Advanced Pattern Memory Test failure - WME02-CIF. Repairable?

  Hi Gary C47.

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  Try to run the Memory Diagnostic tool and check.

  Diagnosing memory problems on your computer

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

• After you install evga geforce 6200, ram memory shows less

  Hello. I had a question about a graphics card, I bought recently. (Its a NVIDIA geforce 6200 by evga) If my computer has 4 GB of ddr pc-3200 ram and integrated graphics card intel. I wanted more video memory and I bought the agp card. After installing it, my ram went up to 2.5 GB. I changed all the settings in the bios, and nothing happened. I went to the rescource windows manager and he says that 1.5 GB of ram's material reserved. The graphics card is a card of 512 MB and I have a little more than a gigabyte of video memory shared. So that means that im missing a gigabyte of ram somewhere I was curious if I could take RAM back somehow.

  Thank you.

  Hello

  I suggest to follow the steps provided and check if it helps.

  Usable memory may be less than the memory installed on Windows 7 computers: http://support.microsoft.com/kb/978610

  Reference: Diagnosing memory problems on your computer: http://windows.microsoft.com/en-US/windows7/Diagnosing-memory-problems-on-your-computer

  Hope this information is useful.

• HP Pavilion 17: Computer refuses to work

  I have less than laptop years.

  When I bought it, it had Windows 8 in it and started showing blue screen of death after a few months. Upgrade to Windows 10 corrects this problem, but now I have the new problem that lasts for months!

  Everything I do, use Internet (mainly Firefox), use Office Word, read PDF files... it suddenly just stop working. The mouse still moves, but he does not respond or responds very slowly. I can't close all running programs and the only option is to shut down the computer by pressing the power button / stop. Second time I open it, it works fine.

  So what's the problem with my computer?

  I have F-Secure virus detection and check, no virus of any kind. No mistakes in hard drive are.

  It has 8.0 Gt RAM memory, about 5, 0Gt is free.

  Processor is AMD APU A8-6410 with graphics AMD Radeon R5, 2000 Mhz, 4 cores.

  Hi Kriss,

  When you get a blue screen of death, its usually a sign of your 1) hard to abandon or RAM memory 2) abandon.

  1. you can run defrags to see if your hard drive is giving up on you, here are a few tips.

  http://www.LapTopMag.com/articles/defragment-hard-drive-Windows

  2. you can check RAM

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

  If it's still under warranty and you still get the problem after defrag and check RAM is ok, you can get those replaced

• "game has stopped working".

  I can't understand it. I've updated windows vista 32 bit. I've updated my card graphics and directx 9 drivers. I also tried to reinstall and I downloaded from different places and got the same thing. I also tried to disable DEP and run the game as administrator. I'm now ideas so any help would be great.

  So basically when I run the game that instantly breaks down and a window pops up that says "game has stopped working" "windows can check online for a solution...". "and you can click on check online or close the program. There is also an arrow down for more details, click that and it says this:
  Description:
  Stopped working

  Signature of the problem:
  Problem event name: APPCRASH
  Application Name: ProjectTorque.bin
  Application version: 1.0.0.0
  Application timestamp: 4a8984bc
  Fault Module name: KERNEL32.dll
  Fault Module Version: 6.0.6000.16820
  Timestamp of Module error: 49952034
  Exception code: e0434f4d
  Exception offset: 0001b09e
  OS version: 6.0.6000.2.0.0.768.3
  Locale ID: 1033
  

  Hi C0123,

  Let us perform the following 4 methods and check if one of these help us resolve the issue.

  Method 1.
  I recommend you to run the Memory Diagnostic tool and check memory problems.
  See the following article for more information:
  Diagnosing memory problems on your computer
  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

  Method 2.
  If you think that any activity of virus that I highly recommend to run the Virus Scan.
  I recommend you to run online Virus Scan to remove any infections, as appropriate.
  Follow the link below to start the free online scan:
  http://OneCare.live.com/site/en-us/default.htm
  The following thread discusses the removal of viruses and malware online:
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Method 3.
  I would also recommend you to uninstall and reinstall the game and check.

  Method 4.
  We can also try to play the game in the State of clean boot and check if it works very well.
  Here are the steps to do:
  Clean clean boot:
  1. click on start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load starting points.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
  9. When you have finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  10. If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  11. When you are prompted to restart the computer, click on restart.

  We hope to hear from you soon.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• New PC and integrated Windows 7 hangs momentarily after racing game.

  Thus, the title says it all, my computer currently marks a 7.3 (5.9 in the calculation) score off the 7.9, it does, however, for reasons that I can't come up with (it's 3:00 and I have a little juggled on it for several hours and assistance or advice would be welcome).

  I describe what's happening: I start a game, DoW 2, my PC is well able to handle the graphics and the game play is smooth without any latency problems, action camera jerky, missing animations or something similar.  I play the game for about 10 minutes... And the computer automatically restarts without warning.

  I have no idea what is the cause, something, sure I'll have a hunch would be food (I remember being told it gives 530 watts, while the graphics card requires 550 watts... would that be?) It would not cause the PC crash at startup? I was told that he wouldn't at the store...)
  There is only the basics on the computer right now: mouse, keyboard, headset and screen
  G9x, keyboard Microsoft Media, G35 and B24W-5 ECO.  I am running Windows 7 64-bit OS.

  Pilots are in control, and I applied all the updates that are rudimentary.  Thanks in advance!

  Hi For7unem,

  Look for error messages or error code in the event viewer. Link: http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-event-viewer

  To refine the on the issue, we first start the computer in a clean boot and see if the problem still occurs. Link below will help you to start the computer in clean boot: http://support.microsoft.com/kb/929135

  If the problem does not persist, you can continue with step 2 from the link above.

  Make sure that you reset the computer in normal mode in step 7. Please return back with the results.

  Run the Windows Memory Diagnostic tool and check errors. Steps to follow

  b click Start, in the search box, type in the Windows Memory Diagnostic

  (b) click on restart now and check for errors

  Link: http://windows.microsoft.com/en-US/windows7/Diagnosing-memory-problems-on-your-computer

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to install xp sp3 with sata driver in my P8Z68-V THE?

  Hi my problem is that I want to install windows xp service Pack 3 in my new computer

  my new computer is compatible Windows7 how to install Windows XP on my new computer?
  It's my form of systems
  Motherboard: ASUS P8Z68-V (compatible with windows7)
  PROCESSOR: Intel Core i7-2600 CPU @3. 40 GHz (compatible with windows7)
  MEMORY: 8 GB
  GRAPHICS CARD: MSI AMD Radeon r6770 (compatible with windows7)
  is it posible to install windows xp sp3 on my profile?
  can u show me the steps by steps in the creation of the xp3 with sata controller
  and how to reformat and bios configuration or steps, follow the steps
  from the beginning to the end

  Hello

  You can follow this link & check if the problem persists:

  How to install or upgrade to Windows XP?

  You can also ask your question in the TechNet forum for assistance:

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  Hope the helps of information.

• my computer slows down significantly when on sites like facebook, videos and watch msn.exe high usage.

  I would add that I am running service pack 3

  Hi Lara Taylor,.

  Here are some links to step-by-step procedures on the release of your computer:

  http://Windows.Microsoft.com/en-us/Windows/explore/speed-up-your-PC

  http://Windows.Microsoft.com/en-us/Windows7/using-memory-in-your-storage-device-to-speed-up-your-computer

  hope this helps,

  B Eddie

• up on my Explorer computer or any other browser except IE toolbar is not visible and Winows dosent run in safe mode at all

  I have xp sp3. I got my disk c thought and I've corrected it. However, I lost the characteristics of grphical it. The toolbar at the top of my dosent computer appears and the option toolbar when you right click on the taskbar at the bottom of the screen is not available. My dosent computer works in SafeMode either at all... After * sptid * file for the type request occurs and I'm going to load, then it restarts.

  Hello windflash,

  I was looking on this thread and is deeply concerned that your drive starts to spin in RAW format.  It worries me because that drives not just do it on their own.  The drive is slowly failing or something else is causing corruption in the file system.

  Based on the process you described, I am sure you did not just to find a virus only once, but several times, making sure that software and definitions are up-to-date.

  I want to say here is that if we have a player who begins to turn in RAW format and there is no obvious causes of software, then we must consider the possibility that the drive is failing slowly on us.  Since there is no way of knowing how long it may or may not have, I would recommend an immediate backup of all important data.

  When the data has been saved, we make a diagnosis of material on the disc.  This is something that the manufacturer of your offer.

  You may also want to check the RAM as well-both with Windows 7 utility and diagnostics supplied by the manufacturer.

  Information on the tester memory provided by Microsoft at the following link:

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

  Let us make sure that the material is stable, because we can not guarantee that the software will work well if its on hardware that does not work.

  Best regards

  Matthew_Ha

• BSOD - pool bad error

  Has been played WoW this morning and got an error that says something about "Bad_Pool_Error", but that's all that I've read before that the system has completely crashed and went to a black screen. Tried rebooting several times (7-8) and it would be only continually hang or freeze prior to ever happen to the BONE. Finally got it runs in safe mode, it is in Windows, and after another reboot had to run in normal mode with no accidents up to that point.

  Have not installed anything recently.

  AMD Phenom II x 4 950

  M4A79T Deluxe Asus Mobo

  6 GB DDR3 RAM

  Corsair 750w PSU

  GTX 285 video card

  Windows 7 64 bit

  Sorry for the late reply. Never, I click on this thread for these days.

  Others also overlooked your post because it's a Win 7 64 bit related investigation on Win XP forum. He asks so to the right forum helps you get answers quickly. In this thread just add the new link to thread as an answer. So I'll also keep in touch with you.

  You should ask:

  http://social.answers.Microsoft.com/forums/en-us/w7hardware/threads

  I suggest you to do the Windows Memory Diagnostic tests on Win 7:

  For more information read below:

  http://Windows.Microsoft.com/en-in/Windows7/diagnosing-memory-problems-on-your-computer

  Always do a thorough memory analysis that require several hours, analysis Standard, skip the problems. While scanning will start on the blue background screen after reboot, then go to the option & select 'Extended '.

  Essentially analyzes your dump I don't have any particularly unstable application. This happens while a fault memory.

  In the next post you should tell us in detail about the brand of memory, each module, the bandwidth capacity etc. If the RAM is defective you will get the replacement from your hardware vendor.

  While posting in the forum of Win 7 the new position must contain this thread link too; as it help other users to know your tests/tests to solve the problem and won't get any duplicate suggestion which is already given by me.

  Hope a Windows Memory Diagnostic test will solve the problem.

  S.Chatterjee