Windows7 for Tecra S10
I have Tecra S10 - 11A.
My laptop supports windows 7? If that's what about additional programs as utility HARD drive protection, software fingerprint, pc monitor.
Where can I download them?
According to information document http://aps2.toshiba-tro.de/kb0/TSB9902P50000R01.htm Toshiba Tecra S10 is Win7 supported.
I checked the Toshiba Win7 download under http://eu.computers.toshiba-europe.com/innovation/windows7_drivers.jsp page and your laptop model is still not listed there.
Occasionally check this page to see if the drivers are available.
For models Toshiba laptops will offer all the drivers, tools and utilities for Win7. So you will not have problems to run all the things you asked for.
Tags: Toshiba
Similar Questions
-
Caddy optical Bay for Tecra S10-106
Hello
I would use an SSD instead of the conventional HARD disk, but SSDS are very expensive and that is why I would like to replace the optical drive with my conventional HARD drive. The optical drive is not often used and so I'm looking for a Bay optical caddy who easily replaced the DVD drive. I know that old Tecra Systems (e.g. 8100), that such a Bay was available.
I don't want to use an external drive, because I do not carry many devices with me. Please can someone help me?
Thanks in advance.
black_dragonHey mate,
I know that there are these optics by caddy for some Toshiba laptops but I don t know if they are available for Tecra S10 and if it of possible.
You should ask a service provider authorized in your country. If this an optical bay caddy is available, you order if by technicians and they can give you a detailed response. :)
-
Issues of update/upgrade of equipment for Tecra S10-183
Hello
TOSHIBA TECRA S10-183
Serial number: xxxxxxxxxxxxxxxxxxxxx
Model number: PTSB3E-0YR04KGR
Code BTO: P8700/2G/160G/15.4WBT/DS2/L/M/B/W/3G
Pre-installed software: Yes [R11382GR]
Purchase date: 13/05/2011I use above professional mobile phone use for CAD programming as well as for Office applications.
2 GB RAM (standard), I can increase up to 4 GB Kingston (ex aequo) on purchase.
With the 160 GB HARD drive, I had a lot at the beginning of the loss of speed.
So I leave a month later to a switch of OCZ Vertex 120 GB of a second
And lasted almost 9 months without problems.
Now, I don't have so much free space in my SDS. So I would like to
'Intel SSD 520 Series 240 GB 2.5 SATA III'
Skip the leave.My question would be, I would get this problem?
(1) in theory, SATA3 work perfectly well this SSD 240 GB right?
In the manual, it is up to 120 GB SATA2 SSD in it. However, the 2009 manual. The information is very old. And at that time were not yet 240 GB free for end users of hard drives SSD SATA3.(2) is there any Windows Professional / Ultimate / Business 64 for 7 as this laptop?
Original, I have Windows 7 Ultimate 32 bit. I wanted that my memory that expanded up to 8 GB. CAD program running on the 64-bit operating system much better.(3) is the card graphic and/or welded directly on my cell or can I leave replace it? It is a plug-in card?
(4) can I switch to a processor / CPU? What size?
(5) the Mobile UMTS and HSDPA / HSPAU / LTE is capable?
(6) I still can't be on the Toshiba support site:
http://de.computers.Toshiba-Europe.com/innovation/generic/SUPPORT_PORTAL/
find when you enter the serial number or model number is not my laptop?On a response, I would be very happy.
Sorry for the bad English. My language is German!
So I hope that someone can help me with my questions.
With sincere friendships.
Etem Basoglu
> 1) in theory, SATA3 work perfectly well this SSD 240 GB right?
> Manually, it is up to 120 GB SATA2 SSD in it. However, the 2009 manual. The information is very old. And at that time were not yet 240 GB free for end users of hard drives SSD SATA3.The SATA controller is not limited in size, you can use 250 GB, 500 GB or more large hard disks. The same should be possible with SSD drives since the controller is the same.
(> 2) is there any Windows Professional / Ultimate / Business 64 for 7 as this laptop?
> Original, I have Windows 7 Ultimate 32 bit. I wanted that my memory that expanded up to 8 GB. CAD program running on the 64-bit operating system much better.Don't know what you mean exactly, but if you want to installed Win 7 64 bit, then you can do without big problems the 64-bit drivers are available on the European driver Toshiba page.
(> 3) is the card graphic and/or welded directly on my cell or can I leave replace it? It is a plug-in card?
The laptop seems to be equipped with a NVIDIA Quadro NVS 150 M chip graphic. This is an external chip that is connected/soldered on the motherboard. But even if you can remove this chip, the upgrade is NOT possible.(> 4) can I switch to a processor / CPU? What size?
http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htmGenerally the CPU upgrade depends on the chipset of the motherboard.
You could upgrade the processor, if the chipset would support the new processor.
There are still questions about BIOS support, but I've read here in the forum that some people have been able to upgrade the new processor.(> 5) the Mobile UMTS and HSDPA / HSPAU / LTE is capable?
Support for 3G modules appears to support the HSDPA standard(> 6) I still can't get on the Toshiba support site:
> http://de.computers.toshiba-europe.com/innovation/generic/SUPPORT_PORTAL/
> find when you enter the serial number or model number is not my laptop?Maybe it is not inserted into the database, but your Tecra S10-183 belongs to the series of PTSB3E that you can search other models belonging to the PTSB3E for details
-
64-bit Windows 7 for Tecra S10
Y at - it anyway how to pre-installed 32-bit 64-bit Windows 7 on Tecra S10?
Ask somehow Toshiba 64-bit DVD or use "' another source and use the same S/N with regard to the current system?You can not switch to the 64-bit version.
You have to make the clean operating system installation.You can just upgrade home premium to ultimate (32- or 64-bit) version.
-
Tecra S10-106 - 3 G driver for Vista Ultimate 64-bit
Hello
I own a Toshiba Tecra S10-106. Due to the fact that Vista Ultimate 64 bit is much faster than Vista Business 32-bit, I would use Vista ultimate 64-bit operating system, but I can't find the 3G for Vista 64-bit driver. All the drivers can be downloaded from the USA in English and can be used in German, only the 3G driver is missing. Can someone send me a download link or tell me where I can find a driver for Vista-bit 66?
Thanks in advance.
Hello
You can download the drivers here:
http://Support1.toshiba-tro.de/Tedd-files2/0/3gdrv-20090303131409.zip
64-bit drivers are located under the Portégé R600 laptop.
Concerning
Phil
-
Could re: Anyone tell me the release date for the Toshiba Tecra S10-106
Could someone tell me the release date for the Toshiba Tecra S10-106. What would be the estimated price for this model.
Thank you
I already posted this in your other thread on Tecra A10.
On the Europe of Toshiba page-> Products->-> Tecra laptops, you will find a whole list of different series and Tecra models.
Right now I find only the info that these phones will be available soon.
You may need to wait a bit...
-
Tecra S10-106 does not see the HARD drive 1000GO
Hello
I bought a 1000MB HARD disk and build in on a TECRA S10-106.
The HARD drive was not identified.Do you have an answer why?
Thank you for the help
Hello
He recognized the HARD drive in the BIOS?
If not, then possibly the BIOS can't handle this HARD drive because of the size
Try a 500 GB or 750 GB 2.5 HDD -
Two screens DVI on Port Replicator II with Tecra S10-160
Hello to all 2!
Right now I'm working with two external 19 "TFT screens connected to the Port Replicator II (Tecra S10-160 inside with closed screen). A display is connected to the DVI port available, the other is connected on the available on the Port Replicator II VGA port.
A single display (DVI) is used as the main office, the other (VGA) is used as office improved (both show different content).My problem is the poor quality of the VGA signal and the problem, my two new screens are only supported DVI.
Is it possible to connect two DVI displays to the DVI - D Port Replicator II? I already checked several DVI-Y-cables, but I'm still looking for a solution connect two displays via DVI with the function to get two split screens and not the same content on both screens.
Hope you got my point and have information or ideas for products for me.
Thanks in advance.Hello
Have you already tested a VGA to DVI? So, you can use the VGA connector on the port replicator and your monitor's DVI port.
I mean such a cable like this
Such an adapter you can always use the function to get two split screens and not the same content on both screens. :)
-
Tecra S10 - 123 and Linux Mandriva boot problem
I have a Tecra S10 - 123 for two months and wanted to install Mandriva on it (I have no experience with Linux...). I burn the Image on Cd image .iso file and changed the bios settings to boot from the CD-ROM. It works without problem, but Mandriva stops to boot from the Live Cd once the kernel is loaded.
What can I do?
Maybe it's a SATA question, have you tried to set the SATA Mode in the BIOS to "COMPATIBILITY"?
Work the other flavors of Linux? Maybe Ubuntu will install properly.
-
Can Tecra S10 - I order a recovery to another disk?
Someone knows how to change the language of Windows 7 on a Tecra S10?
Can I just order a recovery disc Englsih from here:
[https://backupmedia.toshiba.eu/landing.aspx]If so, what is the price of these discs?
The PC has a license for the preinstalled Windows 7 Pro 32 bit German, and I need it in English.
Hello
I doubt that this will be possible.
You can order the recovery disk only with the same Windows operating system which was preinstalled on your laptop.
If you need a different language of Windows or another version of windows, then you will need to purchase an original MS Windows disc.
This means that you will get the new clean operating system, drivers may be downloaded from the page of European driver of Toshiba.
-
Re: Tecra S10 disorders with drivers
Hey
I have on my Tecra S10 (PTSB3E) Windows 7 64 bit installed.
In Device Manager, I have the "PCI Communicationscontroller" without the appropriate driver. What I have to do, that this element gets the correct driver?A Secoud problem is with my docking station. I have the PA3680E. When I have my S10 anchored on the station, I have another device without the correct driver. The USB-serial controller. Also the fingerprint reader - Gets an error when I run the application.
Can someone help me get the correct insalled in the system?
Thank you
ThomasHello
Who knows what you have installed and what are the missing drivers.
Here is the order of installation for your computer laptop tecra. Check it out to see if everything is installed or not:Win7
Chipset utility
Matrix Storage Manager
TOSHIBA Value Added Package
Installation of the PVAT button setting
Display driver
Realtek HD Audio Driver
ALPS Pointing-device Driver
TOSHIBA software modem
Driver LAN (EnergyStar support)
Wireless LAN driver
Bluetooth Stack for Windows by Toshiba
Intel AMT Management Engine Interface
RICOH Media Driver
O2Micro smart card reader driver
TOSHIBA SD Memory utilities
TOSHIBA SD Memory Boot Utility
Logon Key TOSHIBA wireless
180 degree TOSHIBA Rotation utility
TOSHIBA HDD Protection
TOSHIBA ConfigFree
TOSHIBA WPS library
TOSHIBA management console
TOSHIBA Assist
TOSHIBA security assist
Pilot TRS for study
CD/DVD Drive Acoustic Silencer
Infineon Trusted Platform Module utility
Infineon TPM (Trusted Platform Module) installation guide
AuthenTec fingerprint utility
Chicony Camera Assistant Software
TOSHIBA face recognition
TOSHIBA SSD alert
TOSHIBA PC Health Monitor
TPCHFsDate.exe for PC Health Monitor
TOSHIBA cooling Performance diagnosis
TOSHIBA Consumtion wattmeter
Sleep USB TOSHIBA and service chargesAll orders must be installed in that order. If missing some driver on this list try please install the driver for Vista 64 bit.
-
Re: Tecra S10 and S11 freeze randomly
We have several Tecra S10 and S11. Freezing randomly during the day. Some even twice within half an hour, others spread it throughout the day.
The Tecra is all Windows 7. Some have 64 bit, others a 32-bit installation. After installation of Windows 7, we have removed additional software we don't need, like McAfee, Toshiba goodies (Assist, Tempro, etc.), Ebay, etc. After that we activatie Office 2007 and Microsoft put updated laptops. So far so good.
However, after a week or two just work in Word causes the Tecra to freeze. Same ctrl + alt + delete does not work. The Tecra should be forced to turn off the power, press and hold the power button.
Everyone recognizes these "frozen moments". It's very annoying.
It is not easy to say why this is happening.
Always it is that Office is preinstalled on almost all laptops Toshiba so I did not thing your laptops can be somewhat different.Maybe something else responsible for this?
Maybe are all connected to your business LAN and there is a problem.
Are connected external devices which can be responsible for this?
Maybe some internal software of the company is blocking something.It is not easy to say what he can be.
Have you done tests in the past to see what can be the problem?
-
Tecra S10-10th revision necessary
Hello
Does anyone found a review for the Toshiba Tecra S10 - 10F P8600?Hello
I found a few details on the Tecra S10 - 10F
http://www.Toshiba.com.HR/PDF/Tecra%20S10-10E.PDFBut if you need some outside opinions on this laptop then I would recommend using Google search engine.
I also recommend checking out Toshiba product page:
http://EU.computers.Toshiba-Europe.com-> Laptos-> Tecra-Tecra S10-> Tecra S10 - 10F series >Welcome them
-
Tecra S10 - change graphics card
Hello
I hava a Tecra S10 and it's a good computer. The only thing I would change is the graphics card. I have a Nvidia Quadro NVS 150 M and I would like to know if it is possible to change it to another. I wish I had a better game experience.
Good day
Thank youHello
I think that this article is right for you
http://APS2.toshiba-tro.de/KB0/FAQ7A01ZW0007R01.htm -
Tecra S10 - unrecognized Usb device
Whenever I plug the mouse usb Tecra S10 - 11A I get the message "unrecognized (or due to a malfunction) Usb device". Then, after several times of rehearsals to plug / plug everything is OK. But after each reboot, I must repeat plug/plug in mouse for several times.
Now, I'm on Vista, but it is even on Windows 7 or XP.
Is it possible to solve the problem?
Thank you!
Hi gordan84,
Have you installed a 3rd party software/driver for the external mouse? If Yes, you should remove it.
This happens with other USB devices like printer too?
Maybe a BIOS update could be useful, you can download it on the Toshiba site.
Maybe you are looking for
-
Red BRAVIA TV flashes 13 times
If you're Bravia does not light and has a red light that flashes 13 times, see this thread that might help! http://www.agoraquest.com/viewtopic.php... 5 & forum = 34
-
my laptop keeps turn off after my free trail of windows 7? How can I fix it__
I installed the free trial version of windows 7 to see if I wanted, I decieded to stay with vista at the moment but my laptop that keeps sutting off after 1 hour of use, I can not stop it how can I recover my vista and keep my old information on it?
-
Black screen when logged into Vista
Hello When I log in, I get a black screen with a cursor. Right now I am in safe mode to use this laptop. I don't remember install or update anything on computer that might have caused this problem. I also tried to open the Windows Task Manager and go
-
missing Ntoskrnl.exe after done windows auto update.
My computer did an automatic update of windows and when it restarts came with error windows that said it didn't close properly and to insert the functioning of the drive and choose "repair option". I tried this but the computer does not recognize tha