windowsroot\system32\hal.dll is missing or corrupt .__How can fix it

Similar Questions

• Error starting: < root Windows > \system32.hal.dll file missing or corrupt

  I used the Norton Utilities 15 on my Win XP = done many times with no problems, this time however she appeared with\system32.hal.dll file missing or damaged asking to reinstall a copy of the above file. F8 opens but doesn't correct; for example, in safe mode and the latest version of work etc does not work as always guests return to error. \system32.hal.dll missing or damaged file asking to reinstall a copy of the above file.

  I have no Win install drive as it came preoaded on my computer.  Is there anywhere I can get this file to replace or am I stuck with my recover the DVD file erase all my personal files/photos etc.?

  Hi KevinHassin,

  (a) you can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your machine.

  (b) thereafter, follow this link & check if you are able to start correctly on the desktop.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.
  Please post back and we do know.

• How to fix the < windowsroot > \system32\hal.dll.

  I have a fujitsu siemens amilo L7310GW. When you try to turn on just to get this message. Windows could not start because the following file is missing or damaged \system32\hal.dll. Please reinstall a copy of the above file. I don't have a copy of the windows xp disc as it came pre loaded on the computer and did I not any other disk to start. Is it possible to do a reinstal or to return to the factory settings? Im not to botherd if all the files are lost, but I would get the lap top operational again. Any help or advice welcome.

  Hi paulthorogood,

  It might be difficult to recover the operating system if there is no XP CD.

  ·         Windows XP was preinstalled on the system?

  ·         Do you know if there is a recovery partition?

  Method 1: The following article should help you to recover the operating system.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Method 2: Since you do not have a disc, factory restore may be possible if there is a recovery partition or if there is no available recovery disk. You can contact the computer manufacturer for more information on this.

• Error - system32/hal.dll is missing after the installation of updates.

  Original title: updates destroy xp installation.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: i'm trying to reinstall xp sp1 on an old toshiba laptop (m35-s456).  After installation and the installation of sp2 and a bunch of KB, reboot xp will not charge and comes up with an error saying the system32/hal.dll file is missing.  no idea why an update would impact on this file?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi derek45,

  The updates you have installed Service pack 1 and 2?

  This problem may occur if the Boot.ini file is missing, damaged, or contains incorrect entries.

  You can follow this link and check if the problem persists.

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S

• Windows could not start because the re-heating or file missing < Windowsroot > \system32\hal.dll.

  Cannot start my computer.

  http://support.Microsoft.com/kb/945380

  http://support.Microsoft.com/kb/314477

  If this post answers your question, click mark as answer .

• "When I start my computer it gives me a message that windowsroot > \system32\hal.dll" what download I can solve this lack?

  He rises before starting Windows then I have to hit enter and it goes to Windows

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/is-there-any-way-possible-to-retrieve-my-data-from/712335d4-d91b-47e5-B178-4f9f87b836f0

  Try this answer and it can help you.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/Windows-could-not-start-because-the-following-file/2bb8607d-aa8b-42b3-b80e-23e323d4e370

  and this is another one with the same problem.

• Windows root system32\hal\dll. missing or damaged

  can not turn on computer says cannot access windows because windows root system32\hal.dll. is missing or damaged.  How can I fix it

  Hi piccard49,

  Follow the steps listed in the links below:

  Error message: "Windows did not start because of a configuration of the disk of the computer problem":http://support.microsoft.com/kb/314477

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer:http://support.microsoft.com/kb/330184

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite Pro A300 - System32\hal.dll file is corrupted or missing

  I have a Toshiba Satellite Pro A300, which says that the System32\hal.dll file is missing or corrupt.

  Is it possible to repair the file by a recovery by the laptop itself, or do I have to get a copy of Windows Vista to start over and do it this way?

  Hoping to get some possible answers to what to do.

  Thanks Christian

  Hello

  I read that some discussions in different forums and in most cases the new OS installation may solve this problem. The HAL.dll in place in C:\Windows\system32 then maybe you could solve this problem in copy this file from the Vista CD in this folder

  You could start the unit by using a Live CD (linux or windows lice CD called PartBe or WinPE)
  But the easiest solution would be to the recovery procedure

• Windows didn't start because the following file is missing or corrupt: < root windows > \System32|hal.dll, please reinstall a copy of the above file.

   \systrem32\hal.dll

  What can I do with this message:

  Windows didn't start because the following file is missing or corrupt: \System32|hal.dll, please reinstall a copy of the above file.

  Thank you

  In Windows XP:

  http://pcsupport.about.com/od/findbyerrormessage/a/missinghaldll.htm

  In Windows Vista & 7:

  http://pcsupport.about.com/od/errorh/a/HAL-dll-missing-Windows-7-Vista.htm

  In addition, if the file is actually missing, you can try to boot from a UNIX / Linux Live CD like Knoppix and add/replace the file manually with a file from another PC running THE SAME VERSION OF WINDOWS!

  If you are not good with computers, you should ignore this option because it could cause serious problems. If you still want to try, and there is a hal.dll file in \system32\ BACK IT UP. You have to put back in place.

  Let us know if it works.

• Windows xp hp will not start. error message: Windows has not start because the following file is missing or corrupt: < root windows > \system32\hal.dll. Please re - install a copy of the above file.

  Hello, I recently restored my windows hp tower to its factory because of virus settings and when I restarted my PC I recieced this error message: Windows has not start because the following file is missing or corrupt: \system32\hal.dll Please reinstall a copy of the above file.  where can I get a copy? and is it possible to download the start software and burn it to a cd?

  Hi FRANKGRIMES_945,

  What is the model of your computer?

  (a) you can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your machine.

  (b) thereafter, follow this link & check if you are able to start correctly on the desktop.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.
  Please post back and we do know.

• Error message: missing or corrupted: [Windows root]\system32\hal.dll

  We bought a new pc with Windows 7. My autocad program is not compatible with this op system so I kept the old pc and plan to use it for autocad only. When I tried to boot the old pc, the following message appears: "Windows has not start because the following file is missing or corrupted: [Windows root]\system32\hal.dll.» Any have a solution outside shoot the operator?

  Hi DickBernhardt,

  These articles may help:

  How to fix System32 Hal.dll:

  http://www.ehow.com/how_6184909_fix-System32-HAL-DLL.html

  How to perform a repair of Windows XP Installation:

  http://pcsupport.about.com/od/OperatingSystems/SS/instxprepair1.htm

  How to restore Hal.dll from the Windows XP CD:

  http://pcsupport.about.com/od/fixtheproblem/HT/restorehaldll.htm

  I hope this helps.

• black screen that says missing or corrupted file windows root\system32\hal.dll

  Original title: Media Center m470n

  I have a Media Center m470n. On startup, I get a black screen that says file missing or corrupt

  (windows root\system32\hal.dll). How can I fix? I have 10 disc that came with the system, what steps should I take just reload this file thanks

  Hi Albt,

  Do you remember any changes made on your computer before the show?

  What is the service pack installed on your computer?

  Follow the steps listed in the links below:

  Error message: "Windows did not start because of a configuration of the disk of the computer problem":http://support.microsoft.com/kb/314477

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer:http://support.microsoft.com/kb/330184

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The following file is missing or corrupt: < root windows > \system32\hal.dll

  I have a problem with my desktop computer. my computer is HP Vectra, Intel Pentium 3 and the operating system is Windows XP Professional. The problem is: the following file is missing or corrupt: \system32\hal.dll I try to use Windows XP CD to repair, but the operating system does not detect the CD.

  Change the first boot of your dvd writer/rom device!

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

• Root Windows satellite 5200 701 system32/hal.dll missing

  My Toshiba s5200 701 crashed today.

  Windows displays this error:

  + windows didn't start because the following file is missing or corrupt: windows root system32 / hal.dll +.
  + Please re install. +

  First of all, this Toshiba is a European model and I live in the USA.
  Second, the model is old.
  Third, I don't have the XP CD reinstal the OS.

  I don't know if it's worth buying a new professional XP for this computer.

  All ideas, suggestions. Please notify.

  Jose

  Hello

  I read on issues such as
  You need to reinstall the OS, but it would also be possible that this error is related to the defective HARD and/or RAM disk.
  Many uses had this error again after the new installation of the OS and in individual cases the RAM or the HARD drive has been affected as well.

  What to say; It s your decision what you want to do... I recommend reinstall Win XP once more to verify if this question relates only to lack hal.dll in the system32 folder.
  However the Win XP license is cheap, because Win 7 is on the market and no one wants to use 'old' OS which will be more in the coming years...

• Windows XP does not start because < root Windows > \system32\hal.dll file is corrupted

  I get the following error message when starting my windows XP Home PC. : Windows didn't start because the following file is missing or damaged

  \System32\hal.dll. Please reinstall a copy of the file. How do I do that?

  This could be the result of a corrupt / missing hal.dll file or boot.ini file. You have your windows disc? If so, follow the instructions below. If you do not have your windows disk click HERE to create a disc of windows recovery console.

  1. Use the Windows XP CD to start your computer.
  2. When you receive the message to press R to repair Windows by using the Recovery Console, press the R key.
  3. Select the Windows installation that you want, and then type the administrator password when you are prompted.
  4. Type bootcfg/Rebuild, and then press ENTER.
  5. When the Windows installation is located, the following instructions are displayed:
     Add installation to boot list? (Yes/no/all)
     [Type Y in response to this message.]

     Enter load identifier:
     [This is the name of the operating system. Type Windows XP Professional or Windows XP Home Edition].

     Enter operating system load options:
     Leave this field blank, and then press ENTER.

     After completing the previous steps, restart the computer, and then select the first item in the start menu. This should allow Windows XP to start normally.

     After Windows XP is successfully loaded, the Boot.ini file can be modified to remove the incorrect entry.