WindowsUpdate_80246008""WindowsUpdate_dt000"

I'm not able to update windows with the error mentioned above. Windows Server SP2 Standard.

I tried to stop BITS services restart, but it does not stop the services.

Hello

Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

See you soon.

Tags: Windows

Similar Questions

  • updated computer then error 'WindowsUpdate_80072EFE' always rises, if that had for months now__and the update itself is "WindowsUpdate_dt000".

    updated computer then error 'WindowsUpdate_80072EFE' always comes if it had for months
    and the update itself is "WindowsUpdate_dt000" Please help me! :)

    Which edition of Windows and what level of Service Pack is now on?

    IF it is Vista or Windows 7, open a command prompt
    Click the start ORB, type cmd in the search box
    Under programs, click on cmd.exe and select 'run as administrator '.
    If a password is used to enter it and then click OK. If no p/w is used, click on the button continue
    At the command prompt type the following and press enter

    netsh winhttp see power of Attorney

    If there is a proxy used then it will show slot next to Server Proxy (s)

    Current WinHTTP Proxy settings:
    Server proxy (s):

    To remove the Proxy Server, at the prompt, type in the following and press enter

    netsh winhttp reset proxy

    Now type exit, press ENTER to close the command prompt.
    See if the system can update now.

    Proxy is sometimes used if a suite of security or the 3rd party firewall (not the native firewall on Vista/Win7) is installed or if the installed antivirus is configured to analyze incoming e-mails.

    MowGreen Services consumer safety update

  • WindowsUpdate_80070643""WindowsUpdate_dt000"

    I use Office 2003 on my new Machine of Windows 7 and when I try to download 3 updates I get this error message. "WindowsUpdate_80070643" "WindowsUpdate_dt000"three updates are updated Office 2003. " I found a site that suggested the OSE Ofiice. Exe may be corrupted and need to be replaced form CD. I tried this but Win won't let me copy or paste the new file. Says I need administrator privileges to do this. I AM the administrator. Tried several microsoft suggested. so love my new machine and Win7 so far! Except f0r this hiccup. Help, please! My not be a big problem, but I'm a freak when it comes to everything working properly.

    Thank you!!!

    Hello Kbores,

    Thank you for using the Microsoft answers Forums.

    Solution for 643:

    It is a common problem with the updates of the .NET Framework.

    http://support.Microsoft.com/kb/923100
    http://support.Microsoft.com/default.aspx/KB/976982

    http://www.networknet.nl/apps/WP/archives/324

    Follow the steps in the web links above to solve the problem.
     
    That should do the trick for you.

    Thank you.

    Kind regards

    Augustine.

    UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO. C

  • "WindowsUpdate_8024200D" "WindowsUpdate_dt000"

    Set to automatic update tried 5 or 6 times (after restart) to install KB967723. It gives the error next "WindowsUpdate_8024200D" "WindowsUpdate_dt000"
    What I can do. Operating system is Vista Ulitmate 64

    Hello

    Download the KB967723 from the link below:
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=b2930ff1-5f0a-4A5D-bf2a-9fb76dd8da63&displaylang=en

    Restart the computer in safe mode by pressing f8 at startup.

    Install the update in safe mode.

    Restart in normal mode.

    See you soon,.
    Raymond

  • Error "WindowsUpdate_80070663" "WindowsUpdate_dt000" Windows 7

    I got this error

    "WindowsUpdate_80070663" "WindowsUpdate_dt000"

    When you try to install the new updates.

    I am running windows 7

    I feel totally blocked and I need help URGENT =)

    Thank you!

    Try resetting WindowsUpdate. If this does not help, try to insert your Office CD while installign updates. If this does not help, remove Office 2007 and install it again. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • WindowsUpdate_80070BC9""WindowsUpdate_dt000"

    I have a problem in this update it is not let me update and load. It is an update of the posting, but I am a partner with Microsoft and the computer is up to date... " WindowsUpdate_80070BC9" "WindowsUpdate_dt000"

    Hi Clexton,

    ·         This error occurs with a particular update?

    1. annotating the updates listed in the updated view. Steps to follow:

    i. Click Start, in the search box, type in update

    II. click on windows Update

    III. click view update history

    Try to download the standalone version of the update and I install in safe mode. You can download the stand-alone version of the below link with number: http://www.microsoft.com/downloads

    You can check the link for the procedure to start your computer in SafeMode below: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

    2 disable any third-party antivirus installed on your computer temporarily protection software and check if this is useful, if the issue is resolved, then you will need to uninstall the antivirus software and install it or change the settings of the same return.

    Thank you, and in what concerns:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Update, error 80200010 # WindowsUpdate_dt000

    The message referenced above is the error in trying to fill three 3 important updates to my computer, I received.  Two 2 updates installed correctly and completely, however, one (1) does not.  In chicking on icon troubleshooting he, I will put this error message "WindowsUpdate_80200010" "WindowsUpdate_dt000"  What does this mean and how can I fix this error and get this update loaded on my computer.

    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80200010

    If Windows Update error 80200010 during updates, this means that the Background Intelligent Transfer Service (BITS), cannot access the Internet. This service is used to connect to the Windows website and download updates to your computer.

    To fix this problem, make sure that your computer is connected to the Internet and check for updates again. To easily see if you are connected to the Internet, point to the network icon in the notification area and wait until you can see the status of your connection. You will see the name of your network or the service to which you are connected and the type of connection you have. If you are on a company or home network, you should see the message access: Local and Internet.

    I figured Vista in this case.

    For info: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/1467f44b-ee27-4f7d-98d7-f1c4b35b3395

    TaurArian [MVP] 2005-2010 - Update Services

  • Could not update "WindowsUpdate_80070663" "WindowsUpdate_dt000"

    "WindowsUpdate_80070663" "WindowsUpdate_dt000" Why can't so far?

    This error translates as 'the patch package could not be opened. "

    The first thing I would say when troublehsooting this error is to run the following command from an Admin command prompt.  This is going to re - register the Windows Installer service.

    1. click on start / run and type CMD and press on enter
    -In Vista, press Start, in the search box, type CMD and right click on the command prompt that appears above, choose Run as administrator
    2. type the following command "MSIEXEC/REGSERVER" and press enter
    3. close the command prompt window, restart the computer and try the update again

    If it still fails, try the following solution below.

    I saw some people to solve their problem by using the Windows Installer Cleanup utility to remove the application in question (Microsoft Office, .NET Framework 3.5) then reinstall the application, then try the updates again.

    See the following article:

    http://support.Microsoft.com/default.aspx/KB/932857

    The article details that you must remove the Microsoft Office registry entries, and then reinstall Microsoft Office.  If you encounter the problem with .net Framework 3.5 updated partners updated, try to remove the .net Framework 3.5, then reinstall .net Framework 3.5, and then reinstall the update.

    I hope this helps.
    If you find my answer was what you're looking for, remember to click on the box "mark as answer" below!

  • "WindowsUpdate_80242016" "WindowsUpdate_dt000"

    Hello

    I tried to install Vista SP1 three times and whenever it goes through the whole process to the point where it restarts and says '100% ' complete, he then said failure of the upgrade and unistalls all this. When I go in the update history it gives me the error message "WindowsUpdate_80242016" "WindowsUpdate_dt000", it's really me naffing off, can someone he goes outside for me please, my AVG is turned off during the process.

    Thank you

    Take a look at this thread, it discusses the error you see and has a solution. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • WindowsUpdate_80072EFD""WindowsUpdate_dt000"

    "Problems with Windows Update for Vista update, continue to receive the WindowsUpdate_80072EFD error code" "WindowsUpdate_dt000." Can someone help me?
    I appreciate any suggestions.   Thank you

    See...

  • WindowsUpdate_8E5E03FA""WindowsUpdate_dt000"

    I can't get windows to install updates. I get the error "WindowsUpdate_8E5E03FA" "WindowsUpdate_dt000" head to the help and support that tells me absolutely nothing. How can I solve this problem?

    I already fixed it. None of your suggested courses of action worked. You cannot run the commands net stop Vista stated that I don't have permissions on the system. Strange, because I am a member of the Administrators group on the local computer? In any case, what I did to fix the problem, it was go into the MMC console and stop the cryptographic service. Then I renamed the folder Windows\system32\catroot2 \catroot2old. Rebooted the system and he forced windows to regenerate a new catroot2 folder. To restart that I forced windows update to search for updates, this can take a long time, up to 3-5 minutes in my case. Windows Update showed me the missing updates and this time they installed properly. Restarted again after updates.  It took a long time for the system to shut down, but must let it stop by itself. On reboot, everything works fine now. I suspect that it is a Windows Vista Service Pack 2 problem as I had no problems until after I installed it. I remembered some clients of mine had this same problem with Vista SP1, and this is how I fixed it.

  • Cannot install the winodws updates! Really need help! ___Error code: "WindowsUpdate_80242014" "WindowsUpdate_dt000" _

    Hello! I'm not very good in English but I'll give a try!

    Yesterday when I tried to install som updates failed.

    They have the status 'pending' instead of 'done '.

    Windows Update can't find them if I find them again.

    I tried to install this update manually, and they said "this update is already installed"

    Error code: "WindowsUpdate_80242014" "WindowsUpdate_dt000"

    Please help me!

    I got a blue screen yesterday, maybe because this wherent updates installed correctly?

    Hi Molphyr,

    Let us know the edition of Windows that is installed on your computer and the error message you received on the blue screen.

    Meanwhile, try to reset the windows component update and check if it works.
    For more information about resetting the windows components Update, click here

    I hope that helps!

    Kind regards
    Abdelouahab

    Microsoft Answers Support Engineer

  • "How can I fix this error of update > > WindowsUpdate_80070645" "WindowsUpdate_dt000"

    "How can I fix this error of update > WindowsUpdate_80070645" "WindowsUpdate_dt000"

    Hi Wesfay,

    1. what version of windows is installed on your computer?

    2. the updates fail with errors?

    If you are running windows Vista, you can try to reset windows update components. Open the link below and click theFIXIT .
    http://support.Microsoft.com/kb/971058

    If you run windows 7 try to run the windows update troubleshooter.

    Open the Windows Update troubleshooting tool by clicking theStart button, then Control Panel. In the search box, typeTroubleshooting, and then click Troubleshooting. Undersystem and security, click fix problems with Windows Update. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

    In addition to the steps above I suggest you follow the suggestion provided by Sortiarius in the thread below link that addresses the same error code.
    http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/a3a127a3-2dc5-42B9-8cd7-87e750a5a442

    I hope this helps.

    Bindu S - Microsoft Support
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • WindowsUpdate_8007371B""WindowsUpdate_dt000"How can I solve this problem

    "Windows Update installation error: WindowsUpdate_8007371B" "WindowsUpdate_dt000" how to solve this problem?

    Allan Storjord

    Hi Allan Storjord,.
     
    1. What is the name of the update?
     
    We recommend that you download the standalone update files and install in safe mode. To do this, try the following steps.
    Step 1: Run the system update tool
    a. connect to the computer as an administrator.
    b. see Update tool for Windows system
    c. download the just update package for your windows.
    d. install the update successfully, then restart the computer so that the changes take effect.
     
    Step 2: Check the history of installed updates
    a. see Windows updates that are installed
    b. check the number of the update.
     
    Step 3: Locate the stand-alone file of the update
    a. visit http://catalog.update.microsoft.com/v7/site/Home.aspx
    (b) in the search box, enter the update number, and search for the update.
    c. download the update just for your windows and save it to the desktop.
     
    Step 4: Start the computer in safe mode and install the updated successfully
    a. see start your computer in safe mode
    b. open the downloaded update file and install one by one.
    c. restart the computer so that the changes take effect.
     
     
    Visit our Microsoft answers feedback Forum and let us know what you think.
  • Updates fail to install, "WindowsUpdate_00000057" "WindowsUpdate_dt000"

    The update always fails to install and the code-"WindowsUpdate_00000057" "WindowsUpdate_dt000", error

    Hello

    ·        What updates you are trying to install on the system?

    ·        Have you installed other updates on the system before this update?

    Step 1:

    Make sure that Windows Update is underway which must be installed on the system.

    a. click on Start menu and type Windows Update in the start search box and press ENTER.

    b. click on Check for Updates and update checking is in progress which must be installed on the system.

    Let us know the number of the update.

    Step 2:

    Reset windows update components and check. Follow the steps mentioned in the article below.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058/en-us

    Step 3:

    I suggest you to run some Surinamese check check the article mentioned below.

    Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

    http://support.Microsoft.com/kb/947821/en-us

    Step 4:

    There may be some third-party software that runs in the background, I suggest you do a clean boot and check.

    To perform a clean boot follow the steps mentioned in the link given below.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: Once you have finished installing, follow step 7 to start the computer in normal startup.

    For more information, see the articles listed below.

    Updates: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/updates-frequently-asked-questions

    Install Windows updates

    http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for