WinHlp32 for Win8 "not applicable to your computer.

Similar Questions

• Error for KB974674 "update is not applicable to your computer"

  Actual title: KB974674 installation problems

  I tried to install KB974674 on my new HP laptop under Windows 7 Home Premium to allow me to back up data from my old XP PC but got the message that the update is not applicable to your computer. Unlike others with this problem, the data are English to English. No reason for the message and how I can make my backup?

  Hello

  -What is the exact error that you receive when trying to install updates?
  -You are aware of any changes made on the computer before this problem?
   
  Method 1: I suggest trying to install the patch and also to try the steps mentioned in step 2 in the " WORKAROUND " section from the link mentioned below to check if the number perissts.
  Restore description of the backup of Windows NT to Windows 7 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/974674
   
  Method 2: Clean Boot Mode
  I suggest to keep the computer in clean boot mode and try to install the updates then check if the problem persists.
  A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, see the link to start to set up the computer in normal clean startup mode.
   
  For reference:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates
   
  Hope this information helps.

• Cannot install, put up-to-date "update is not applicable to your computer.

  Original title: I can't open the help that was created in Windows Help format (WinHlp32.exe)

  Hello

  I tried to open a help file to an old program on a clean install of Windows 8 Pro PC.
  I followed the link:
  http://support.Microsoft.com/kb/917607#top
  Downloaded:
  Windows8-RT-KB917607-x 86.msu

  Respond to 'run '.

  Installation fails:

  Windows Update Standalone install

  The update is not applicable to your computer
  Any help appreciated
  Martin

  Apparently this fix only works if your language is set to us English. It failed on my own with the British English language. I replaced the file c:\windows\winhlp32.exe with this forum post and all is well. I found it easier to use the great unlocker utility to rename the existing version.

• "This update is not applicable to your computer"

  OT: CVE-2015-1635.

  Hi all

  I get an error message when I try to install the security Windows8.1 patch - KB3042553-x 64.msu on my Windows 2012 R2 server. Can you please help.

  "This update is not applicable to your computer"

  I downloaded the patch from the Microsoft Download Center. My server configuration is:

  Server Windows 2012 R2 (64-bit)

  Thank you

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Cannot install XP Mode (this update is not applicable to your computer)

  Hello

  I am trying to download Windows XP mode to my laptop Windows 7 Professional. When I try to run the "Windows Validation' (WindowsActivationUpdate.exe) reads:"this update is not applicable to your computer"I spent the other Microsoft validation tools, but not one that is an"update ". If I try to display the update in Control Panel to uninstall, it and any other update is listed. What continues?

  Thank you, Cam.

  Hey prince1217,

  You have a 32-bit version or 64-bit Windows 7?

  Check the information by following the steps outlined in the article below.

  My PC running the 32-bit version or 64-bit Windows?

  Please make sure that you selected the correct version of this link: http://www.microsoft.com/windows/virtual-pc/download.aspx

  Once this is done, follow the instructions in this article to help with the installation of Windows XP mode.

  Install and use Windows XP Mode in Windows 7

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• "the update is not applicable to your computer" while trying to install the Media Feature Pack

  I tried to install "Windows6. 1 KB968211 - x 86-RefreshPkg' and the following error message received.
  "the update is not applicable to your computer".
  what I need to do to solve this problem and finally install the Media Feature Pack and get WMP12...?

  Hi Anthony Atz,.

  Your version of WIndows 7 Home Premium SP1 should include the media player. This link includes download of Windows Media Player 12.

• Trying to get the Media Feature Pack. Get Windows Installer update is not applicable to your computer

  I am wanting to Windows Media Player 12. Site MS say I need the Media Feature Pack. I try to download. Gives me a choice of... X 64. MSU or... X 86. MSU. When I try or the other, I get "Windows Update Standalone Installer Update not applicable to your computer.

  It's win 8, I7, 8 GB of RAM chip

  Are you talking about Windows Media PLAYER or Windows Media Center?

  Windows Media Player is included in W8. On the start screen, type

  Windows Media Player

  and it should appear. then right click it and pine to the screen start then you can open it when you want.

  --
  Barb

  MVP Windows Entertainment and connected home

  My Blog - http://digitalmediaphile.com/

  Connected world Blog Reader Windows 8 App Barb-
  http://apps.Microsoft.com/Windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461C-b1d5-06e54a58d298

  Windows and Surface drive Windows 8 App community
  http://apps.Microsoft.com/Windows/en-us/app/Windows-and-surface-community/0abb150e-D287-47d4-837E-9fa51f485ad7

  Please mark as answer if that answers your question

• KB977206: this update is not applicable to your computer.

  I tried to install Windows xp mode in my windows 7 PC. I installed Windows xp and virtual PC, and then kb977206 to installation mode on the pc without hardware virtualization. But it throws the error message indicating that my computer is not applicable for this update. What should do? technology trends

  AdBar,
  Did you go in the "Resolution" section of KB977206?  If not, go through that and run the detection tool of HAV and post back with the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "No not applicable to your computer update" message when trying to install "Windows6. 1-KB958559-x 86.msu"(Virtual PC)

  I run Windows 7 Ultimate RC (Build 7100) and get the above error when you try to install the update to Virtual PC.

  Win 7 is a new installation and Windows XP Mode was installed before the upgrade with no problems.

  The lines the cbs.log after installation to tell newspaper:

  2009-10-23 19:23:35, info CBS TrustedInstaller start initialization. 2009-10-23 19:23:35, v6.1.7100.0 Info CBS responsible Servicing Stack with Core: C:\Windows\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7100.0_none_7a5259aa1c604bad\cbscore.dll 2009 - 10 - 23 19:23:36, CSI Info 00000001@2009/10/23:17:23:36.247 WcpInitialize (wcp.dll version 0.0.0.6) called (battery @0x64c3d92e @0x64e250d2 @0x64e015c4 @0x881c99 @0 x 881236 @0x771f75a8) 2009-10-23 19:23:36, called CSI Info 00000002@2009/10/23:17:23:36.247 WcpInitialize (wcp.dll version 0.0.0.6) (battery @0x64c3d92e @0x64e65a32 @0x64e628c2 @0x881c99 @0 x 881236 @0x771f75a8) 2009-10-23 19:23:36 Called info CSI 00000003@2009/10/23:17:23:36.247 WcpInitialize (wcp.dll version 0.0.0.6) (battery @0x64c3d92e @0x6e814b68 @0x6e815461 @0 881327 x @0 x 881245 @0x771f75a8) 2009-10-23 19:23:36, initialization information CBS ending TrustedInstaller. 2009-10-23 19:23:36, CBS info from the main loop of TrustedInstaller. 2009-10-23 19:23:36, info CBS TrustedInstaller service starts successfully. 2009-10-23 19:23:36, CBS M² info: initializing online with opt-in Windows: False 2009 - 10 - 23 19:23:36, Info CBS M²: cleaning of report files older than 10 days. 2009-10-23 19:23:36, info CBS M²: requiring all reports pending upload. 2009-10-23 19:23:36, info CBS M²: could not start model file download: C:\Windows\servicing\sqm\*_std.sqm, flags: 0 x 2 [HRESULT = 0x80004005 - E_FAIL] 2009-10-23 19:23:36, CBS M² Info: failed to start the standard sample download. [HRESULT = 0x80004005 - E_FAIL] 2009-10-23 19:23:36, Info CBS M²: queue 0 file (s) for download with motif: C:\Windows\servicing\sqm\*_all.sqm, flags: 0 x 6 2009-10-23 19:23:36, CBS M² Info: WARNING: cannot download all reports pending. [HRESULT = 0x80004005 - E_FAIL] 2009-10-23 19:23:36, CBS News no treatment necessary start-up, TrustedInstaller service was not defined as autostart, either a reboot is still pending. 2009-10-23 19:23:36, CBS NonStart info: check to ensure the treatment of start-up was not necessary. 2009-10-23 19:23:36, info CSI 00000004 IAdvancedInstallerAwareStore_ResolvePendingTransactions (call 1) (flags = 00000004, progress = NULL, phase = 0, pdwDisposition = @0x77fba4 2009-10-23 19:23:36, Info CSI 00000005 NT transaction creation (seq 1), objectname [6] "(null)" 2009-10-23 19:23:36, result of transactions (seq 1) Info CSI 00000006 created NT 0x00000000, handle @0x1c4 2009-10-23 19:23:36, Info CSI 00000007@2009/10/23:17:23:36.294 CSI perf trace: CSIPERF ") : TXCOMMIT; 25637 2009-10-23 19:23:36, CBS NonStart info: success, start treatment only required as expected. 2009-10-23 19:23:36, info CBS start processing thread ends normally 2009-10-23 19:23:36, Info CSI CSI store 1304200 (0x0013e688) 00000008 initialized on 2009-10-23 19:23:36, CBS Session Info: 30036997_2378047888 initialized by the WindowsUpdateAgent client. 2009-10-23 19:23:36, info CBS read on the applicability of the package cache for package: Microsoft-Windows-VirtualPC-package-TopLevel ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.1.7600.16393, ApplicableState: 0, CurrentState:0

  I checked the compatibility of my system wird SecurAble (http://www.grc.com/securable.htm) and all is well.

  BTW: the XP Mode run perfectly before reinstalling Win 7 on the same computer without changing anything to the configuration.

  I'd appreciate any help / suggestions!

  Sorry for my not so good English, is that you can not see my native language ;-)

  Best regards
  Rolf

  Had the same problem. It turned out to be the service of module instaler Windows not being able to start due to a registry size limit.

  See this thread for a fix > http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/42e2a200-defe-4c6b-a1b3-606836dcfabb

• KB974674 - the update is not applicable to your computer

  Cannot install the update KB974674 (utility to retrieve backups made with xp/2003, 7/2008R2)
  I am running win 7 64 bit pro Portuguese.
  First of all, I tried to install the English update version because I did not notice that the language must match.
  I got the error anf, I thought it was normal because of the language difference.
  But I got the same error when I tried to install the Portuguese version.
  Did a system restore, but can not install...

  SBSConsultant,
  What is the error you get when you try to install this update?  He appears in the update list?  Here are some things you can look for assistance.

  Clean boot

  Troubleshooting Windows Update Installation questions Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 - KB976264 indicates 'not applicable' to my computer

  After reading the update of Windows 7 x 64 to improve existing at this URL compatibility,http://support.microsoft.com/KB/976264 , I downloaded the Windows 7 x 64 bit compatibility update KB/976264, and when I tried to execute the file to update on my PC Windows 7 64 bit Home Premium it produces a dialog box saying "this update is not applicable to your computer. I checked the list of updates that are currently installed for the number 976264 and it is not there. Then, I went to Windows Update and check for updates available and there is only a list, such as an update of the .NET Framework. If this update is for Win7-64 as shown, and I have not installed it, why I can not install it? I have several legacy applications, I would try to start. Note that I just did a fresh install of Windows 7-64, about a week ago and have barely used the PC at all.

  Hello

  Windows Update offers you updates that are applicable to your computer or required to keep up-to-date. You have applications or games listed in the article for this update to be offered. Check out the list and let us know if this is the case.

  In addition, this update is not the only way to run incompatible programs. You can run the troubleshooter for compatibility to run incompatible applications and games. Follow the link below for more information on the resolution of compatibility issues.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• While im trying to install WMP 11 in my starter of windows 7 there is an error saying that "UPDATE IS NOT APPLICABLE to ONE COMPUTER"... Why is it so?

  Problem:

  When installing wmp 11, I encounter an error saying that the update is not applicable to your computer... can someone help me with this problem?

  Unless it's a computer N Win7 or NK, WMP 12 is already installed on your new computer, Judd. To enable access to WMP 12 (turn it on), see http://windows.microsoft.com/en-us/windows7/Turn-Windows-features-on-or-off ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• What should I do when Windows Update is blocked for 3 days, saying "do not turn off your computer.

  Windows Vista Home, automatic installation of updates 3 days ago, when it froze. He said 'do not turn off your computer', but ctrl + alt + delete does not work, so what do I do? I can't use all the controls while the update is frozen. If it's a difference, it is stuck on that updated 3/3 to 66%. Thanks in advance.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/computer-freeze-during-Windows-7-update/8968dba7-1e08-4594-bd49-3559d49c6cfe

  08/13 / 1115:29: 13:00 HTC

• ThinInstaller "not applicable to your system of packages were found.

  Downloaded and configured Retriever 5.0.5 with updates for Thinkpad X 1 carbon (A 20, 7) for Windows 7, but trying to get packages with ThinInstaller Retriever 5.0.5 Update 1.2 there isn't "not applicable to your system of packages were found"

  Let me say first of all... We have several other Thinkpad models, where it works very well and packets is set to 'active '.

  Tried:

  Remove all updates

  Delete database.xml and database.vsd and konfigure retriever.

  Repository to copy to the local computer

  Tried other Server Update Retriever
  

  Reinstalled update Retriever
  

  Do the new repository of hole

  And nothing wont get updates for this model.

  Local execution ThinInstaller logfile must put long, here!

  I had the same problem with our new T440 models. I updated thininstaller to the latest version 1.2.0010 and then I could see all of the updates that I had downloaded with TVUR.

• Windows 8.1 message 'you could not complete updates, by undoing the changes, do not turn off your computer.

  Greetings,

  I installed updates in my Windows 8.1 partition.  Then he asked me to restart the computer, and the message "we could not finish updates, exchange loss, do not turn off your computer" appeared and was on-screen for hours.  I thought to reinstall bootcamp but I have software in the Windows partition that cannot be recovered.  I read that one of them starts Windows in 'Safe' Mode, but this is not possible. I use a MacBook Pro (retina, 13 inches, early 2015) OS X 10.10.5

  How can I fix this without wiping the Windows partition and lose my software?

  Thank you!

  Have you created a Windows system restore point before the upgrade?