Winlogon.exe guard popping up saying 'No disc' there is no disk in the drive. Insert a disc into drive K

Similar Questions

• Acrobat.exe - no disc. There is no disk in the drive. Please insert a disk into drive \Device\Harddisk\DR1.

  I have Windows 7 Professional in my office. I get this error permanently on my PC.

  "Acrobat.exe - no disc. There is no disk in the drive. Insert a disc into drive \Device\Harddisk\DR1 ".
  I reinstalled Adobe Acrobat X. error message is yet to come again and again after a short interval.

  I have Windows 7 Professional in my office. I get this error permanently on my PC.

  "Acrobat.exe - no disc. There is no disk in the drive. Insert a disc into drive \Device\Harddisk\DR1 ".

  I reinstalled Adobe Acrobat X. error message is yet to come again and again after a short interval.

  I had the same error today and found the answer to my question.  Acrobat attempts to retrieve a file on a removable disk, which is no longer present.  In my case, it's an SD card.  I reinserted the card in the reader and acrobat then asked if I wanted to recover the file, to which I said no. Acrobat no longer shows the message at startup.

• «There is no disk in the drive.please insert a disc in the drive \Device\Harddisk1\DR4.»

  Hi all!

  When I try to install AVG on my WINDOWS XP SP2, a message is displayed with Titile "scvhost.exe - no disk" and the body of the message said that "there is no disk in the drive. Insert a disc into drive \Device\Harddisk1\DR4.

  attachment: -.

  http://i51.Tinypic.com/6zoaoo.gif

  or

  

  Please help me as soon as possible!

  Thank you very much!

  Post in the forums of users AVG.

• Error: "regsvr.exe - no disk there is no disk in the drive." Insert a disk into drive\Device\Harddisk1\DR1 "_".

  Original title: regsvr.exe - disc no.

  Hello

  I get an error message whenever I insert my pen drive or memory card in my laptop. The error message is "regsvr.exe - no disk there is no disk in the drive." Insert a disk in the drive\Device\Harddisk1\DR1. There are only three options - Cancel, Try Again and continue. None of them works. I have to manually stop the system to get rid of it. Please help me get rid of this error message for always. Your response to this regard will be highly appreciated. Cordially Sashwat

  Hello, Sashwat

  If possible, test the drive in another computer and check if you are able to access or not. If this is not the case, the drive may be bad.

  If it's a USB card with an SD card reader, rather than a dedicated, flash drive check if the card is recognized and accessible in other drives/devices. Also, check the metal contacts on the card to make sure that nothing is blocking the metal contacts. If the card cannot be read in other devices and contacts are clean, the card is likely bad.
  If other devices can access the drive, but not by the card reader, the card reader could be bad.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• First 13 items there is no disk in the drive. Please insert a disc

  I installed the box of the first 13 and 13 Photoshop elements on a brand new Dell with Windows 7 computer.  Everything is going well except for a pop-up message in the elements of Prime Minister, "there is no disk in the drive. Please insert the disc... ». I have read several messages from people encounter the same problem and I tried all the suggestions that were provided: restarting, uninstalling, reinstalling. I disabled the firewall and Virus when I did reinstall it by copying the file from the disk to my office and execution from there. I can't believe that there is no support for this problem. If anyone has a real solution, please let me know. The Photoshop works fine, so the problem is related to items only. I'm ready to throw in the towel and just get my money back.

  vh0thu

  In light of no one size fits all for the drive no problem, we try to find out what happens to work for you.

  I have a lot of variety to explore, but the most promising so far is that of PRE_help involving the OldFilm.AEX in this any disc.

  Have you read newly installed does not first element 13

  PRE_help wrote in this thread

  Could you try to remove the old Film of the first elements 13 installation location, and then try to launch the application? The right to be removed file is (assuming that you installed in the default location)

  Program Adobe Premiere elements 13\Plug-Ins\Common\NewBlue\OldFilm.AEX

  While we're not 100% certain that it is to blame, we have seen that this solves the problem in some cases internally. Let us know if that helps.

  Kind regards

  Team first Elements

  1. do you have a slot for SD built into your computer? If so, do you have anything in this niche right now? If not, put to the test to white comes with the computer in the SD card slot and watch the results on any drive.

  2. are you all messages regarding no disc in a named player, you feel you've ever had? If so, consider anyway management computer/manage/disk to verify that there are no named TAPI driver here. If found, we could consider giving the reader a different drive letter.

  3. do you make the scenario - uninstall, free ccleaner cross, reinstall it with antivirus and firewall disabled?

  4. have you deleted the Adobe Premiere elements Prefs file, and, if it does not, then you deleted the whole 13.0 folder in which the Adobe Premiere elements Prefs file exists?

  5. with this particular problem and you cancel your way out there?

  To what extent are you within 30 days the purchase?

  Please review and consider. Looking forward to your results.

  RTA

• Repeat the mistake of Photoscreensaver.scr: "there is no disk in the drive. Insert a disc into drive \Device\Harddisk4\DR4.

  I've looked everywhere to find a solution to this problem, but it will not go away.  the message I get is

  "There is no disk in the drive. Insert a disc into drive \Device\Harddisk4\DR4.

  I have only one hard drive installed, my C drive with a partition D of the spirit of the original plant. I would be very grateful is some has a fix for this!

  Hello

  This can happen if you have conencted some disk of the machine that has pictures and you have set up the photos in the screen saver.

  You can try to change the photo screensaver can access the registry path if it exists.

  a. Click Start, type regedit in the search box and press ENTER.

  b. navigate to the

  HKEY_CURRENT_USER\Software\Microsoft\Windows Gallery\Slideshow\Screensaver photo

  c. If the screen saver is mentioned in the settings, then on the right you will see "FolderPath".

  (d) the entry for folderpath should be C:\Users\Public\Pictures\Sample pictures

  e. If isn't changing for the above entry.

  f. exit the registry editor, restart the computer and check.

  Important: The above mentioned steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Svchost.exe - No. disc there is no disk in the drive. Please insert a disk in to drive\Device\Harddisk1\DR5

  When I'm inserting an internet data card into my USB its error message indicating that svchost.exe - disc no. there is no disc in the drive. Please insert a disk into drive\Device\Harddisk1\DR5 Cancel, continue tryagain all option does not work its new popuping outside. :(pouvait point de restauration système peut aider?) or is it a problem with the virus please help.

  Hello

  1 did you change on your computer?

  2 what other USB devices are detected on the computer?

  Try connecting to another USB port and verify.

  Connect the card to internet data to another computer and check if works

  I suggest to download and install the Microsoft safety scanner and run the scan and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx WARNING: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate

• No disc in the drive - no. disc, 'there is no disk in the drive. Insert a disk in drive \Device\Harddisk1\DR1

  Hello

  I use windows 7. When I try to connect the usb modem or remove drive in my computer, and then sometimes it displays a .exe - no disk popup, "there no disc in the drive. Insert a disc into drive \Device\Harddisk1\DR1. There are 3 options Cancle, retry, continue. But these options never work. It appers again. (I can't repair/restore my pc because I have only One Drive (C). so please help me...)

  Hi Kalyan,

  Thanks for posting in the Microsoft Community. Help us with more information:

  1. This problem is specific to these devices?

  2. Have you tried to connect the devices on different USB port?

  This problem can be caused by damaged USB drivers. I suggest trying the steps and check if it helps to fix this problem.

   

  Remove and reinstall all USB controllers

  To remove and reinstall all USB controllers, follow these steps:

  1. Click Start, click run, type sysdm.cpl in the Open box, and then click OK.

  2. Click the hardware tab.

  3. Click the Device Manager button.

  4. Expand Bus USB controllers.

  5. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

  6. Restart the computer to reinstall the USB controllers automatically.

  7. Plug in the removable USB storage device and test to make sure that the problem is solved.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• There is no disk in the drive. Insert a disc in the drive device harddisk5 dr5

  I started getting this error message "there is no disk in the drive. "Insert a disk into the drive device harddisk5 dr5.  I have to click on about 20 times and it goes away eventually.  I use Windows 7 and have been unable to find an answer to how to make this message go anywhere.  Any suggestion would be appreciated.  Thank you!

  Hello

  ·         Were there recent changes made on the computer before the show?

   

  This problem occurs when all the following conditions are true:

  (a) you have a removable drive, such as an Iomega Zip drive, configured as the drive letter C.

  (b) you don't have a removable disk in the removable disk drive.

   

  Method 1:

   

  Change the assignment of drive letter for the removable a drive letter other than C:\.

   

  a. log in the computer as an administrator.

  b. Insert a disk in the removable drive.

  c. type computer management in the start search box and press ENTER.

  d. click on disk management.

  e. right-click the partition, logical drive or volume that you want to change and then click on change drive letter and paths.

  f. click on the removable drive, click it, click on change, click the drive letter that you want to use, and then click OK.

   

   

  Method 2:

   

  I also suggest you to start the computer in a clean boot and check which program non-Microsoft is the origin of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/929135

   

  Warning: After using the boot is a way to solve your problem step 7 follow-up to reset the computer to start as usual.

   

  Method 3:

  You can go to Device Manager and see if you have any yellow bang! for the mouse or devices.

  (a) click Start and then click Control Panel.

  (b) click on system and Maintenance link.

  (c) in the system and Maintenance window , click the Device Manager link at the bottom of the window.

  In Device Manager, go then, mouse or other pointing devices.

  Do you see a yellow fringe! This would mean that you have an error with this device. Try to remove and reinstall.

  I hope this helps.

• There is no disk in the drive. Insert a disc into drive C

  For no obvious reason for this error message and it takes several mouse clicks on cancel before stop appearing, but as soon as you try to work on a PDF file, it reappears. I don't have a C: drive as it was changed by the system when I loaded Windows 10

  Hi thanks for getting back to me. I managed to solve my problem by doing a delete clean and then reloaded the application of Adobe Distribution.

  Once again thanks for your response

  Sincere greetings

  Glenn Stagg

• IType.exe - no disk in the drive. Insert the disk in drive D:

  I have a message that says "itype.exe - no disk in the drive.  Insert the disk in drive D:"I do not know how to delete or correct this problem... help, please.  Thank you!!!

  Hi LauraCzarnecki,

  1. when exactly you get this message?

  2. did you of recent changes on the computer?

  IType.exe is a process belonging to the Microsoft Intellitype keyboard software. This can probably occur due to corruption in the registry for the key intellitype.

  If you have any IntelliPoint or IntelliType software on the system installation, then try uninstalling and reinstalling.

  For more information, please visit the following links:

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

  http://www.Microsoft.com/hardware/downloads/default.mspx

  Hope this information is useful.

• my iphone says verifivstion failed there is a connection to the apple id Server error

  my iphone says verification failed there is a connection to the apple id Server error

  What are you trying to do when you get this error? Sign in settings/iCloud?

• Remove the Windows Vista so that the upgrade can continue. He says that I can not upgrade both on the drive.

  I had to have my hard drive replaced and the company that made him put two versions of 32-bit and 64-bit Vista Home Premium on it.  Soon, I discovered that I was getting conflict on my computer and he discovered that the two were on the hard drive.  I'm trying to upgrade to Windows 7, but I'm at the stage where it tells me to seek answers on the removal of Windows Vista so that the upgrade can continue.  He says that I can not upgrade both on the drive.  I know the other option is to do a clean business, but I would avoid this possibility if possible.

  need an answer as soon as possible... Thank you

  I had to have my hard drive replaced and the company that made him put two versions of 32-bit and 64-bit Vista Home Premium on it.  I soon discovered that I was getting conflicts on my computer and discovered that the two were on the hard drive.  I'm trying to upgrade to Windows 7, but I'm at the stage where it tells me to seek answers on the removal of Windows Vista so that the upgrade can continue.  He says that I can not upgrade both on the drive.  I know the other option is to do a clean business, but I would avoid this possibility if possible.

  need an answer as soon as possible... Thank you

  Hello

  The best way is to clean install and start over.

  In addition, it is not legal to have both installed version that the license is for a single installation.

  If it is a dual boot with 32 bit and 64 bit installed on different partitions, there would not have been the conflicts you would have never started in one or the other.

  See you soon.

• convertxdvd 4 continues to say no disk in the drive, but it isn't what the problem

  ConvertXtoDVD 4 says no disc in the drive, but nothing. Doesn't seem like it is known what the prob may be.

  Hi Tim,.

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You get the message in ConvertXtoDVD 4 which no disc in the drive.

  1. is the limit only to a particular DVD question?

  2. are you able to recognize the DVD without using ConvertXtoDVD 4?

  3 - is the full error message?

  4 did you do changes on the computer before the show?

  I suggest you follow the steps in the site:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  Warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

   

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

• When I downloaded Firefox, an icon for a disc of Firefox appeared on my screen, but there is no disk in the download. How can I remove this icon of disk?

  I can't drag this disk to the trash to get rid of because he says that Firefox is to use it, but that may not be the case because there is no disk. I want to get rid of the icon of the disk.

  What I wanted, it was hitting the green button 'Resolved' next to the answer that you most. Please excuse me if my answers sounded weird, I don't have much experience with FF on Mac.