wire aspect is different outside the frameworks

Similar Questions

• [CS3, ACE] Head Turner: Image shot differently in the framework of the tour...

  It is possible to get x, y coordinates of each angle of a rotating column?

  ... and from every corner of the limits of the image contained in the said framework?

  Difficulties with positioning when re-linking an image in a frame rotating turned out differently after editing in PS. Image appears to move slightly to the right and downwards.

  So far, close but smoke in the absence of cigar.

  You can get the values for the frame by getting "full path of channel 1 of the ' it. You can rotate the content framework so the image is without rotation, do your sums there, then cancel to put it back.

• Keep the shadow in the framework

  I have a psd file, which is placed inside a frame in InDesign. When I apply a shadow, the shadow extends outside the framework (see red arrow). How to cut the shade to stay only in the framework?

  

  Do not apply the shadow to the entire object. Select the image only and apply it to that. You must paste into the image. And the part outside, place a second instance of the same image in place without a shadow. Group the two together.

• PDF content differs from the content of the framework

  Using FrameMaker 12.0.3.424

  Have a page with the content of the text (formatting as a numbered list). In the framework document, the last item in the list on this page is #6, # 7 appearing at the top of the next page. The PDF, however, has #7 on the bottom of this page and #8 at the top of the following.

  While this may seem like a strange curiosity that doesn't really matter, I have a Master Page rotated in the same file that formats incorrectly because of this (the page wrong turns).

  Someone at - it ideas?

  Update: I just saved in PDF with the screen on the pages in question: as soon as distilling began to run, #7 article moved to the bottom of the previous page, then moved after the PDF has been created! With item #7, beginning at the top of a page with a Page break prevented him from moving. But why is happening!

  What is the system default printer in the session of FM? If it's not the AdobePDF printer instance, then FM has share printers over the SaveAsPDF operation and this can cause a re-flow due to differences in the settings of the printer (and perhaps fonts). There is a third-party utility (freebie) automatically sets the AdobePDF as default printer for the session of FM and then switches back on your system by default. See utility SetPrint of Sundorne to: http://www.sundorne.com/FrameMaker/Freeware/setPrint.htm

  There is also a 12.0.4 patch for FM that you should update.

• Cloud tv Android App not available outside the United States

  Why the new cloud TV android app is not available for people outside the USA (Google game store of restriction)?

  As far as I can tell that the iOS app can be installed by anyone, so this seems unnecessary.
  He also mentions the cloud TV app for android on Toshiba of the EU website.

  On a separate note, does anyone know when the update of the firmware will be available which provides support miracast for TV of cloud platform?

  Details are not known to me, but on the cloud of Toshiba TV portal, you can find this disclaimer clause;

  + Toshiba Cloud TV is available in the television series L4, L6, L7, L9, M6, M8 and M9. +
  + Toshiba cloud TV content differs from one country to another and may change or end without notice. +
  + Errors and omissions excepted. +
  + The features available in the Toshiba TV cloud application may vary according to the country selection. +
  + Availability of app MediaGuide and Toshiba cloud TV vary dependent countries. +
  + To view the list of products and creating model and legal information, please click [here. | http://www.Toshiba.eu/innovation/Generic/disclaimers-Legal-Information/] +.

  http://www.Toshiba.EU/innovation/generic/cloud-TV-portal_eu/

• DeskJet 2050 All - in - One J510a: outside the printable area

  Hi all

  I use-

  W.7, Ultimate, 64-bit.

  Name of the model: Deskjet 2050 All - in - One J510a
  Firmware version:... SLM2FN1006BR
  Serial number:... CN0BD3F28805D1
  Service ID:... 21074
  IK No.:... 670
  Software version:... 028.000.1313.000
  The printer driver version:... 09.84.00.1189

  When you use Word, in Office 2010, I have margins set to 'Normal ' -.

  Top: 0.98 "low: 0"

  Left: 0.12 "right: 1.18"

  Whenever I have insert a border around my text and that you try to print, I was informed that section 1 page borders are defined"beyond the printable area of the page. Do you want to continue? »

  By clicking on 'Help' I read and follow all the different "solutions" available. None allow the page to print.

  I selected all of the selections of available margin different and even selected some of my own under the "custom margins. The page to print with border permits.

  For example, one that I tried was-

  Top: 0.06 "low: 0.57"

  Left: 0.12 "right: 0.13"

  I then clicked on 'Options' under 'Page borders.'

  to the "measure of" I chose "Text" once more, I was unable to print the page with the border!

  I find this very frustrating, and I can't find a solution.

  I would be very grateful if there is a known workaround that will allow me to print a Word document with a border selected.

  (I have no technical experience, and if there is a soluition, I'd be happy to get detailed instructions!)

  Thank you

  ColinX

  Hello

  Your printer can print without margins (IE margin = 0 ").  This printer can print only to a certain margin.

  bottom margin is 0.57 ",
  top margin is 0.06 "
  and the left and right margins are 0.125 ".
  
  So if you try to print beyond this margin, the impression will be cut or outside the printable area.
  
  Kind regards.

• Change the folder of default reports from outside the sequence editor

  Hello

  I want to set the path to the folder of the regular reports of TS (xml) outside the sequence editor, i.e. in a txt file. I would like to load this value in the sequence or the performance of model sequential (to read this file). Play with what I achieved only copy reports to different my folder both outside. No one knows how to correctly do this operation?

  See you soon,.

  K

  I have accomplished this setting the path of the report dynamically, using the ReportOptions reminder in my process model.

  I had set the following report options:

  Parameters.ReportOptions.DirectoryType = "SpecificDirectory".

  Parameters.ReportOptions.Directory = 'C:\\Program Files\\Functional Test\\Reports\\' + Parameters.UUT_PN

  Parameters.ReportOptions.BaseName = 'report '.

  Parameters.ReportOptions.UseFormatForExtension = TRUE

  Parameters.ReportOptions.Extension = «»

  Parameters.ReportOptions.ReportFilePath = «»

  Parameters.ReportOptions.NewFileNameForEachUUT = TRUE

  Parameters.ReportOptions.AddTimeAndDateToFileName = TRUE

  Parameters.ReportOptions.GeneratePath = TRUE

  arameters. ReportOptions.Format = "html".

  The second entry above, I set the directory based on the number of game USE which is analyzed by the operator.  So in your case, you will need to set the "Parameters.ReportOptions.Directory" item based on a path read you a text file.   According to the structure of your text, file, get the path of the report (from file) could be done in a few differnet ways...

  Thank you

  Paul Holzrichter

• What is the important of the framework and what is its role?

  What is the important of the framework and what is its role?

  I guess you mean, NET Framework and its different versions.  It is a programming platform, some of your applications need this to work.  Instead of having to write completely every thing software developers scratch use so-called "frameworks" to ensure that their applications do certain things, for example, if you want to tell your program to save a file, just insert a little short of code that calls the framework to do real work, in this way, you don't have to write all the code to save the file and orders the programming for this platform.  Not only this saved a lot of work, he adds also in general more stability to the software that the programmer doesn't have to test and debug these programming functions that have been developed and tested by Microsoft, otherwise, it would be some sort similar to reinvent the wheel for each piece of software.  If you know a little more about programming, or on older versions of Windows 9 x, .NET Framework is like Visual Basic and the runtime libraries, it is a more recent incarnation of software platform.  It is best to not uninstall and play with these different versions, if you are part of your software may stop working.

  John

• SRA-store outside the Active Directory user attributes

  Is it possible to be able to store a custom user attribute, such as Mobile phone number, outside the Active Directory?

  I would like to be able to use it on the the email (an email/SMS gateway) 2nd factor authentication process.

  I would like to avoid duty or anything else in AD store or having to expose the unit to SonicWALL SRA.

  It's something that we do now with our Barracuda SSLVPN device I'm looking to replace it with this.

  You can configure a different email for OTP by user.  In admin console click on users > local users.  Change the user you want, and then click the tab linking strategies.  Fill in the email address: field.

• RecordStore opening to outside the UiApplication

  Hay,

  What is the right way to open the store from outside the UiApplication?

  I can't open the store like that? :

                 try {
                      recordStore = RecordStore.openRecordStore("data98989", true);
                 }catch (RecordStoreException rse) {
                     //exception handling
                 }
  

  I have already given on the RecordStore the UiApplication and want to read the data in the callDisconnected of the AbstractPhoneListener method. Can I do this? How do I do that?

  I've already implemented the AbstractPhoneListener and it works and listening to calls, but it just does not load data from the RecordStore. Can someone help me on this?

  Thanks in advance.

  A RecordStore can be opened only by the MIDlet Suite/Application that created it.  Note that the listeners on a BlackBerry can run in a different process to your application.  This may prevent access to a RecordStore leave in a listener.  As a work around you can use a BlackBerry persistent object.

• Huge table with PDF (1.4 TB) be stored outside the database

  We have a table with BLOB where a PDF one stored. Now, we want to bring these data from the database (backup reaseans etc..).

  Any solution? Maybe a total another data store - stuff 'BIG DATA '?

  Thanks - regards

  Oliver

  If some give me a solution for a way to store PDF files outside the database.

  If you want to store the PDF file outside the database, then there are usually two approaches.

  (1) in the database, there is a table that stores the name of the file and the location on disk of the PDF. The written application the PDF file in the file system and then updates the database with the location and the name of this PDF file. If the application must Access the PDF, it looks up info in the database and then retrieve this file. The application must be able to read and write to the disk outside the database.

  (2) use such BFILE as mentioned previously.

  In both cases, your PDF documents is stored outside the database, but in my opinion, this does not eliminate the need for backups. If these PDF are lost, and there is no backup, then the data are lost. Because its outside of the database, a database backup backs up only data. The backup may be different and however different backup method is used. But I've seen cases where the db backup was performed at a given time and the binary backup was done at another time and restoration, there were inconsistencies that needed reconciliation.

  HTH,
  Brian

• To the area outside the BC help, but why the styling is all garbled for some reason any?

  Hey everybody,

  I designed a website using the muse of adobe, and it displays perfectly when I download at BC (Open refugees Ware)

  However, in the evolution of the field of www.row3d.org, the style becomes confused and the changes to a different font and size of text formatting, ruining the design. So emails are returned, so for now, I unplugged the row3d.org field to continue working by email.

  Any ideas on what could be the problem? I have contacted support a day ago and still have not heard anything, and it is a matter of urgency to publish the Web site as soon as possible.

  Thanks for your help!

  Lana

  Regarding emails, when you post on Adobe Business Catalyst, default Business Catalyst takes (Exchange mailer) MX records and assume that you will use the services of MX in British Colombia (which means you'll be BC for your e-mail client). To use your current e-mail service outside the BC, you need to adjust the MX records under management Site > Site Domains, then you will see an option at the bottom of your MX records. To resolve, check out the docs here - creating Inbox for your users and scroll down to the 'external MX Records.

  With respect to the styles, it's quite strange. Have you tried to clear the cache of your browser?

• Failed to load content in a frame. Content of the framework is responsible to the next level

  Hello
  
  We have a requirement that one of our page (schedule) must be called from financial information (EN, a different web application). EN opens the page of planning in a new framework, you get a dialog box with the message:
  Failed to load content in a frame. Content of the framework is responsible to the next level.
  
  To resolve this problem, I put the case frame to 'never '.

    <context-param>
      <param-name>oracle.adf.view.rich.security.FRAME_BUSTING</param-name>
      <param-value>never</param-value>
    </context-param>

  This solves the problem, but I want to know is - this safe from the safety point of view.
  
  Thank you
  Matt.

  Hello
  Ideally, you use "differentDomain" instead of "never", if the page is part of the same domain. If you use "never" and the page is available on the Internet, then you people risk wrap in their iFrame to launch phishing attacks. If you have disabled basically a native security feature in ADF Faces. Its you who can decide if phishing is a thread in your application

  Frank

• Access outside the firewall APEX

  We have APEX 4.0 on Glassfish and the listener of the APEX. We would like to be able to access the APICES of the outside of the firewall. Can you tell me a few steps on this operation. I found a mention on the APEX site that would be inside the firewall and not external APEX earpiece but that's all.

  You say that you run the listener of the APEX on Glassfish, so yes, APEX listener goes everywhere go to Glassfish.

  Suggestion of Udo is a little different from my second option and could be better. In your current configuration, you have two components - the listener of the APEX running on Glassfish application server and the database that runs your APEX applications. Udo adds a third component, a HTTP server, such as Apache, which is your portal to the applications.

  If you can do:

  the user's browser HTTP > Apache AJP or HTTP >-->APEX Listener on Glassfish Oracle Net firewall > Oracle database (Udo suggestion)
  OR
  the user's browser HTTP > APEX Listener on Glassfish Oracle Net > firewall --> Oracle database (my option 2)
  OR
  the user's browser HTTP >--> APEX Listener on Glassfish Oracle Net firewall > Oracle database (my option 1)

  The key is that the firewall must be configured to allow traffic that will pass through it.

  The advantage of my option 2 or Udo suggestion is that you only allow traffic from a particular server outside the firewall in a protocol specific to a server inside the firewall. Udo suggestion makes this server information less vulnerable on what is inside the firewall and can be more easily used to simple HTML pages. It also makes changes less to your current configuration.

• CS6 pipette can enjoy outside the window more?

  You used to be able to choose the color of ANYTHING, including an image that may be hovering in a window of another program or anything else on the screen (that is, a color of browser button) by simply clicking on a Photoshop document with the pipette, do not release the mouse and dragging outside the window of Photoshop and hovering over anything on the screen.  Now, when you scroll to the edge of the window, the window scrolls in the CS6!  Ugh!  I've used this for years!  I tried now different function keys in order to change the behavior, and none work. They took this on Photoshop after years and years whether a function?  Any suggestions on how to do it?

  Thank you!

  No, this behavior has not changed (and indeed you have lots of fixes on MacOS).