wire lost

Similar Questions

• DV9207 lost without wire-second unit to die

  OK - had the DV8 lose display two weeks ago - bad motherboard. bgas and got to work. At the Intel motherboard

  Now, my DV9207 lost wireless.

  It has the Intel motherboard with 7600 Nividia GPU.

  The manual switch on the side to activate wireless stays "amber" - whatever the position.

  Have deleted the driver and reinstalled it, nothing.

  Reformatted A few months ago and used only for the use of the internet, so nothing new in the equation.

  Talked to HP tech a few minutes ago - you guessed it, never heard of this before, I'm the only one with Intel that has this problem. Sheesh...

  (They should say, 'Only one' a hundred times a day)

  Have you seen the questions on the motherboard, causing concerns wireless soldering?

  Should I try to reflow it, too, or watch the wireless card?

  Thanks for your time

  The wireless card is fine. It will not replace the wil help. It is the motherboard.

• Why the blue wires turn orange when changing to subtract to divide the operation?

  Hi all

  I wonder what happened in my block diagram.

  I had an article that has had an operation of subtraction with numbers... I realized that I needed to divide by 2 rather than subtract long days here by two (summer)... and when I did, all turned orange wires before blue...

  I have a compound arithmetic by adding 3 numeric values to come... through a case statement... case 0 default transmits values through, case 1 divided by two...

  Is there a change of type of data here, I do not understand?

  Thank you in advance,

  Cayenne

  Divide an odd integer value leaves you with a decimal number. LabVIEW decides so it is best to use a floating point representation (double in this case) If no data is lost.

  There are several alternatives if you do not want to change your data type: function quotient & rest, scale of power of 2 function (in this one you will have to imagine a way to distinguish odd numbers if you need to)

  You can, of course, also to change the type of data in full after the division.

• Out of reading 2-wire 4-20mA pressure sensors using the NI9203 module

  Hi all, I'm sure that a lot of people can give a response would we apply for this.

  While looking at the wiring diagram on some pressure transmitters (2 wire 4-20 mA output, direct wire), that I'm about to buy, I noticed a slight inconsistency with the wiring in the NI9203 manual. Here are links to manuals for sensors:

  Swagelok pressure transducers

  Following the manual of NI9203, the + ve terminal of power supply (24Vdc in my case) must be connected to the Brown Terminal in the transducer and - ve supply ground COM on the NI9203. This leaves the Green Terminal in the transducer must be connected to AI0... AI7 on the NI9203 module. This provision makes perfect sense to me. However, the user for the transducer manual suggests that the Terminal green must be wired to zero volts land i.e. COM. This configuration makes less sense to me.

  My question is, the internal electronics of the transducer released still the same my current for the same measured pressure given by the curves of calibration for sensor, even if the Green teminal is not connected to zero volts?

  I have a hunch it's okay, but I wanted to be sure before that I lost many years spent money / bad record pressure. This should be a matter for manufacturers of sensors I know, but I found this forum is * much * more useful!

  See you soon,.

  Chris

  Hi Chris,

  The 9203 is a device for current descendant be plugged on one side common or 0 volt.  You must connect your pressure in 2 wire mode sensor.

  + 24 v DC to the positive terminal on your sensor pressure 1 terminal or brown flying lead, Terminal 2 green flying lead is connected to AIx on your 9203 and the commune of the 9203 connected to 0 Volts on your power supply.

  All 2-wire device used in a current input down is still as cable + volts then 2-wire device + then then 2-wire device - (or 0) then HAVE + then common then 0 volt.

  In my experience the 9203 can be rather prone to noise pick up devices with 2 sons and need a suitable clean power supply.  For 2-wire devices, I take 1024 readings and then averaged to reduce noise.

  See you soon

  Stephen

• OfficeJet 8600 more: power cord with adapter for Officejet 8600 set more lost

  Lost my power cord complete with adapter. Can I use a power cord generic Office Depot, without the 'square' on the wire? Or is it necessary to have the power cord with the adapter, as it was originally? It will damage my 8600 more to use a power cord without this "square" in the annex on my more than 8600 all-in-One? Thank you.

  Hello @DB2,

  I understand that you have lost the power cord for your HP Officejet Pro 8600 more e-all-in-one printer and you want to replace it. I would like to help you to solve this problem today. The HP Officejet 8600 more only comes with a power cord. The adapter is built into the back of your printer. You have to unscrew the back of your machine in order to access it. Therefore, if you buy a spare power cord it should work perfectly for you.

  The power requirements for this machine are:

  • Power: Universal power adapter (external)
  • Power consumption: Input voltage: 100 to 240 VAC (± 10%), 50/60 Hz (± 3 Hz)

  Output voltage: + 32V / + 12V to 1095 mA/170 my

  • Consumption: 30 watt impression (project Quick Mode); 32 watts copy (Fast draft Mode)

  -Source

  You can buy a power cable of the store to use with your printer, or you can contact our Technical Support queue and buy the correct power cord for your printer by phone.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  Please let me know if this information solves your problem. Thanks for joining the Forums from HP Support. I look forward to hear from you!

• After replacing a lost critical system file, I can now initialize & get online, but I have no sound.

  After replacing a lost critical system file, I can now initialize & get online, but I have no sound. How can I activate the sound back?

  original title:. Its Windows XP problem

  Hi Delno,

  I suggest to check the connection of the wires to the speakers and then follow the steps in the article.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Let us know if that helps.

• Paolo does not connect to the internet: wire or wireless

  Hello.. I'm current to rejuvenate an old computer medion laptop...

  Initially, the h/d is dead... so it was set up a few months ago... most recently I brought a new h/d and mounted everything ok... installed a base xp home service pack 2.i knew I lost drivers system Basic... so after some research, I found compatible driver pack for: sound, bios internet (wireless and ethernet) and graphics... etc... I installed from a disc like reiceved and followed the instructions and all the drivers installed correctly... If everything works apart from the internet... all the shows to work ok but no connection.

  wire conn shows like UN-plugged... and wireless is unsuccessfully to conn... When the two are reliable services of work... and work very well with the other c p. I checked all known parameters of the internet... and everything is ok... any assistance with this would be greatly appreciateted... much thanks deano...

  Hello dear,

  Follow these steps and check if the problem persists.

  Step 1:

  Follow all the methods of the link below and check if the problem persists.

  How to troubleshoot connectivity TCP/IP with Windows XP
  http://support.Microsoft.com/kb/314067

  Step 2:

  I suggest that you test the problem in safe mode with networking and check if it connects to the Internet.

  Aziz Nadeem - Microsoft Support
  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I lost my wireless connection, says no wireless connection available... but they are!

  Hello

  I use a laptop dell inspiron with windows 7 - I set up a wireless connection with talk talk about 6 weeks - and things has of worked - this weekend the small icon at the bottom of the laptop had a red throug crodd there - when I clicked on "Open the network and sharing Center" he registered the wireless connection, I use and had a maximum strength indicator , but a red cross through the connection.

  I checked the wireless router with my computer pc laptop and work - blaze they work correctly. So I have concluded, the dell laptop itself (which is about 6 weeks old).

  I plugged the yellow wire - and makes hard wired - and the internet works on the laptop.

  Keeping in mind I don't know anything about computers or how correct - can someone tell me if I've lost a program and where/how to find it or not it sounds like a defect on the laptop

  I'll be very grateful for any help

  Thanks domi

  If the Dell is still under warranty, by all means, file a claim and see if a new card does the trick.  It is a Forum of Vista, this is why everything is on Vista - you should have posted in the Forums of Windows7 if it is the OS you use - then the tips and links correspond to your system.  I suggested to contact Dell in a previous post - not specifically for this, but it would have developed in the conversation.

  Even if it is not under warranty, there is a good chance that the card is the problem if the system can connect wirelessly with another device (which means that the configuration is correct and connections work and Vista has no problem with the wireless operation).  If you can, try to make sure you can return it for a full refund if you attach and encounter the same problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Update the blackBerry Smartphone applications lost with the new device

  Hello

  I lost a few apps after downloading the latest OS - the most important is my password, suggestions as to how can I get it back?

  Hello mfheatlie,

  Welcome to the community,

  Before the upgrade you have your backup on desktop software?

  If Yes can then connect your device to desktop BB software > software on the BB desktop click applications>

  There, you can see everything that you request list before your upgrade.

  Select the Application that you want to transfer and then click APPLY.

  If your applications lost are paid APPS. and you can not get to watch this link wire relocation paid apps

  I hope that your problem decided. Good luck.

• Connectivity lost in the dmz (pix) and answer arp

  Good afternoon. I have the pix 515e with 6 interfaces.

  PIX firewall-firewall # sh ver

  Cisco PIX Firewall Version 6.3 (3)

  Cisco PIX Device Manager Version 3.0 (1)

  Updated Thursday, August 13 03 13:55 by Manu

  Material: PIX-515E, 64 MB RAM, Pentium II 433 MHz processor

  Flash E28F128J3 @ 0 x 300, 16 MB

  BIOS Flash AM29F400B @ 0xfffd8000, 32 KB

  The computers placed in the demilitarized zone, sometimes lose the connection with the other. Found a following problem: to arp request sent by a computer, it receives the response and the necessary computer and pix.

  IP address on the interface of the pix (dmz) - 172.21.35.1

  Test connectivity to the computer with the IP 172.21.35.5 to clear the arp table:

  ping 172.21.35.4

  Ping 172.21.35.4 with 32 bytes of data:

  Reply from 172.21.35.4: bytes = 32 time<1ms ttl="">

  Request timed out.

  Request timed out.

  Request timed out.

  Ping statistics for 172.21.35.4:

  Packets: Sent = 4, received = 1, Lost = 3 (75% loss),

  After ping:

  > arp - a

  Interface: 172.21.35.5 - 0 x 10003

  Internet address physical address type

  172.21.35.1 00-0d-88-ef-23-29 Dynamics

  172.21.35.2 00-0d-60-ec-85-32 Dynamics

  172.21.35.4 00-0d-88-ef-23-29 Dynamics

  very strange: address Macs.1 same et.4

  Ethereal, running on the same computer:

  N ° time Source Destination Protocol Info

  1 0.000000 172.21.35.4 broadcast ARP which has 172.21.35.1? Say 172.21.35.4

  Image 1 (106 bytes on wire, 106 captured bytes)

  Ethernet II, Src: 172.21.35.4 (00:11:25:57:f9:2 c), Dst: Broadcast (ff: ff: ff: ff: ff: ff)

  Address Resolution Protocol (request)

  N ° time Source Destination Protocol Info

  2 1.381832 172.21.35.2 172.21.35.5 ARP, who has 172.21.35.5? Say 172.21.35.2

  Frame 2 (60 bytes on wire, 60 bytes captured)

  Ethernet II, Src: 172.21.35.2 (00: 0d: 60:ec:85:32), Dst: 172.21.35.5 (00:11:25:a8:75:7e)

  Address Resolution Protocol (request)

  N ° time Source Destination Protocol Info

  3 1.381842 172.21.35.5 172.21.35.2 ARP 172.21.35.5 is to 00:11:25:a8:75:7e

  Frame 3 (42 bytes on wire, 42 captured bytes)

  Ethernet II, Src: 172.21.35.5 (00:11:25:a8:75:7e), Dst: 172.21.35.2 (00: 0d: 60:ec:85:32)

  Address Resolution Protocol (reply)

  N ° time Source Destination Protocol Info

  4 2.754731 172.21.35.5 broadcast ARP which has 172.21.35.4? Say 172.21.35.5

  Frame 4 (42 bytes on wire, 42 captured bytes)

  Ethernet II, Src: 172.21.35.5 (00:11:25:a8:75:7e), Dst: Broadcast (ff: ff: ff: ff: ff: ff)

  Address Resolution Protocol (request)

  N ° time Source Destination Protocol Info

  5 2.754839 172.21.35.4 172.21.35.5 ARP 172.21.35.4 is to 00:11:25:57:f9:2 c

  Frame 5 (106 bytes on wire, 106 captured bytes)

  Ethernet II, Src: 172.21.35.4 (00:11:25:57:f9:2 c), Dst: 172.21.35.5 (00:11:25:a8:75:7e)

  Address Resolution Protocol (reply)

  N ° time Source Destination Protocol Info

  6 2.754968 172.21.35.1 172.21.35.5 ARP 172.21.35.4 is at 00: 0d: 88:ef:23:29

  Image 6 (60 bytes on wire, 60 bytes captured)

  Ethernet II, Src: 172.21.35.1 (00: 0d: 88:ef:23:29), Dst: 172.21.35.5 (00:11:25:a8:75:7e)

  Address Resolution Protocol (reply)

  on the pix

  #debug arp

  782: arp-in: application to the demilitarized zone of 172.21.35.4 0011.2557.f92c for 172.21.35.1 0000.0000.0000

  783: arp - set: arp added dmz 172.21.35.4 0011.2557.f92c

  784: arp-in: generate the response of 172.21.35.1 000d.88ef.2329 to 172.21.35.4 0011.2557.f92c

  793: arp-in: application to the demilitarized zone of 172.21.35.5 0011.25a8.757e for 172.21.35.4 0000.0000.0000

  794: arp - set: arp added dmz 172.21.35.5 0011.25a8.757e

  795: arp-in: generate the response of 172.21.35.4 000d.88ef.2329 to 172.21.35.5 0011.25a8.757e

  Why pix sends the response to the arp request?

  Hello

  Maybe it's because proxy ARP on the pix. You can try disabling this interface with the command "sysopt noproxyarp.

• has: lost interrupt

  Buenas,

  We have a small problem in one of our ESX 3.5. Seems that tras virtualizacion infructuosa of a team, the pantalla log-in to the Service Console presenta cada 10 segundos approximately, a message of that: ' has: lost interrupt ". He could observar el device had match al del CD-Rom ESX host.

  He visitado varios foros donde expresan este problema pero ninguno is claro como el problema avoid.

  Reinicio El del welcome no solventa el error. Alguna idea?

  Hola Xacolabril,

  No hay (what.) Siento Al final, tengas re-instalar, pero coincided con el soporte of VMware, as lo he EDI en otro wire, pero a veces creo are mas facil re-instalar do a debugger del problema. Lo malo are no. we have been sin saber cual fue el problema?

  Saludos,

  Jose Maria Gonzalez,

  Founder and president of JmGVirtualConsulting.com

  -

• Lost headphones

  So I lost headphones that I use for the iPhone 5 s and I honestly can't remember how I lost him it is quite difficult to remember things and so I have the one year warranty so I was wondering that since I was the one year warranty is it possible if I could get some new sense of headphones that I have the one year warranty or I just had to buy a new pair of headphones with money?

  Yep, I have to shell out the money, unfortunately.

• My preferences iCloud lost password! How can I retrieve or reset?

  My preferences iCloud password is lost! How can I retrieve or reset?

  

  It's the same as your password Apple ID.

• Lost my MacBook upgrade now what?

  My old notes on my MacBook have been lost with my upgrade now what? It's so infuriating. I had just finished meeting with my parents doctors and took notes down during a telephone conversation with them - now what?

  Updated from what version of Mac OS to which version?

  What specific notes app? iCloud?

  You have a time Machine or another backup?

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.