wire Window 7 and wireless at the same time

Similar Questions

• Can my MG6320 to connect wired and wireless at the same time?

  I have a MG6320 on a wired / wireless internal - can he connect both at the same time, or what I have to choose one or the other?

  Hello.

  Only one network connection may be used at a time.  They cannot be used simultaneously.  This is the case even for one of our products PIXMA network with Wi - Fi and ethernet connections.

  If additional information is required, please call us at 1-800-OKCANON.

• Wired and wireless at the same time HP Laserjet MFP M226dw Pro

  Hi all

  I'll put up an MFP HP LaserJet Pro M226dw.  Connected by ethernet with a static IP address.  I also want to connect to the wireless network but when I try I get the status message: not enabled.  Unplug the network cable in order to activate the wireless connection.

  To me, it sounds as if you may have either ethernet or wireless but not both simultaneously.

  Is this really the case?  AirPrint works however it is best to attach the printer to the wireless company.

  

  Thank you

  According to this guide "Getting Started", you cannot use both wireless and wired network connections at the same time with the LaserJet Pro MFP M225 or M226 models:

  

• Wired and wireless at the same time

  Printer: hp photosmart 6520; operating system: win7; router: linksys

  When I arrived to this printer, I have used the USB connection and everything was fine. Then I changed to wireless mainly to use eprint.

  This morning, I decided to go back to the wired USB connection - has been able to accomplish it, but with considerable difficulties - and now I have 2 printers in the folder of my printer (photosmart HP 6520 and photosmart hp 6520 (network).)

  My question is: can I get the printer to function as both wired and wireless? If so, how?

  maxie987 wrote:

  .. This morning, I decided to go back to the wired USB connection - has been able to accomplish it, but with considerable difficulties - and now I have 2 printers in the folder of my printer (photosmart HP 6520 and photosmart hp 6520 (network).)

  Hello

  They are LOGICAL printers to separate the physical connections.  Before, you have made a conversion of USB-wireless (has removed the printer), but now you have TWO connections. Yes, we can use both connections at the same time, but when you send a print job to print your computer need to know how which.

  Kind regards.

• Running Windows Defender and McAfee at the same time will cause performance problems?

  Will be running Windows Defender and McAfee Antivirus at the same time slow down my laptop, and it is necessary to run both at the same time.  I have windows vista.

  Hello

  McAfee is normally disable windows defender

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  for a good anti-malware program try this FREE

  Download update and scan with the free malwarebytes anti-malware version

  http://www.Malwarebytes.org/MBAM.php

• m251nw usb and wireless at the same time?

  I'm about to buy a m251nw laser color printer, but I want to make sure that it can print both a wireless connection and a USB on my desk at the same time.  I read the manual, but we didn't on this point.  In other words, I want to be able to print from the desktop via USB while for example my wife prints from the iPad at the same time.  Thank you.

  Hello

  Yes, there is no problem.

  While that wired (ethernet) and wireless network connections do not work simultaneity, USB and Wi - Fi can operate and will not interfere with each other.

  Kind regards

  Shlomi

• I have Windows xp and Vista on the same computer, my fligth Simulator is on xp. How do I play for vista or I need to install Island all on vista

  I have Windows xp and Vista on the same computer, my fligth Simulator is on xp. How do I play for vista or I need to install Island all on vista

  Hi, CPC,.

  Welcome to the Microsoft Answers Community!
   
  You must install Flight simulator on vista as well as Windows Xp and vista are two different operating systems.
   
  You log in to vista, you may not use any of the XP application and vice versa.
   
   
  Thank you, and in what concerns:
  Azeez Nadeem
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you

• How to play music and narration at the same time on windows movie maker?

  I'm working on a project and successfully, I could put my videos for a song. to get all the points for the project I need to explain what is happening in videos. I have now that I need to tell and I was able to do it too. I don't know how to play the narration without stopping the music, I need narration and music at the same time. I know this is possible because I found...

  You can add music and narration Audio / Music track in Windows Movie Maker. The two can play at the same time in your published movie. You can then adjust the audio levels to determine which audio will play louder than the other in your movie.

  Please write again (:)

  I'm working on a project and successfully, I could put my videos for a song. to get all the points for the project I need to explain what is happening in videos. I have now that I need to tell and I was able to do it too. I don't know how to play the narration without stopping the music, I need narration and music at the same time. I know this is possible because I found...

  You can add music and narration Audio / Music track in Windows Movie Maker. The two can play at the same time in your published movie. You can then adjust the audio levels to determine which audio will play louder than the other in your movie.

  Please write again (:)

  =================================
  Simple solution... Publish (save) your project in the
  film format .wmv to a folder on your hard drive.

  Re-import the file .wmv (as a new project) and now
  audio / music will be clear and you can add
  the narration.

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• In Windows 7 Action Center, MSE, and Windows Defender convertible 'ON' at the same time?

  In the center of Action of Windows 7, Microsoft Security Essentials (MSE) is enabled.  I tried to turn on Windows Defender 'manually' and get a status of "OFF"OBSOLETE"? that quickly toggles back and forth

  I'm trying to maximize my options "malicious."  I have NOT tried turning 'OFF' MSE to see if Windows Defender will be 'ON '.

  My real question is, can MSE and Windows Defender, being 'ON' at the same time or are mutually?

  A "full scan" using MSE detected the following malicious program "trojan:Win32 / Tracur.AV". I immediately deleted it. I think it's GONE!

  My "quick" weekly scans did not detect this malware. What a scare on my new laptop TOSHIBA P750.

  Now I take the time 'always' do a full scan.

  Help

  Hello

  Welcome to the Microsoft community.

  If you use Microsoft Security Essentials, there is no need to use Windows Defender. You can disable that and just let Microsoft Security Essentials run things.

  You should only use an antivirus program. using several programs at the same time will cause problems.

  Please refer to this link:

  http://answers.Microsoft.com/en-us/protect/Forum/MSE-protect_start/Windows-Defender-and-Microsoft-Security-Essentials/5309cb8d-02e1-40E8-974f-0dcedb9ab9fd

  It will be useful.

  Let us know if you have any questions about Windows and we will be happy to help you.

• on the Iphone 7. How to listen to music, if we have a normal headset and charge at the same time?

  How to listen to music, if we have a normal headset and charge at the same time?

  < re-titled by host >

  It sopposed must be a wireless charging dock to be launched shortly if the dock does not so it is a disappointment

• Questions about serial port read and write at the same time

  Hi I create a user interface for the communication serial port, where there are essentially 2 front panels, where the user enters commands one and the other where the prints of UART is delivered. I thought initially using a state machine but the reading and writing may be independent sometimes and so I can't rely on States. I searched a bit on the forum and he left me even more confused. Help, please.

  (1) in a thread that sessions visa duplicated has been used for writing and reading at the same time, is it recommendable? How will this affect performance?

  (2) essentially when the vi is reading data are it must constantly view as well, however, someone said that it takes too much memory to use shift registers, so how do I go about this? If using a State in queue after the loop of reading it affects the playback loop and be sequential?

  In addition anyway is to move the cursor to the latest data from the indicator

  (3) for the control of the user input, assumes that the user has entered an order in the control and press ENTER, then writing visa is launched, but if it comes in another string and press enter then write must be called again... is - it possible? will detect the previous commands in the control of compensation?

  (4) according to my understand the expectation for the event do not monopolize resources and writing can go in parallel, am I right?

  Thank you. I have attached a very basic vi which took me to the point, but I want to make it more robust. Please help especially in the part of the user interface.

  su_a,

  (1) you can have only one session to a port. Several UART can handle full duplex so performance is not affected.  At flow rates of high data and large amounts of data, buffering and latencies of BONE can become a problem.

  (2) who told you that shift registers using too much memory? Shift registers are usually the best way to transfer data from one iteration to another. String concatenation inside a loop (registry to offset or not) causes the chain to develop and may require re-allocation of memory.  Your VI never clears the string so its cold length become very large.

  Generally, you do not have an active cursor on an indicator.  If you want to always display the most recently received characters and turn on the vertical scroll bar use a property node to keep scrolls to the bottom.  This can be annoying for users if they attempt to manually move the scroll bar and find that the program continues to move it back automatically.

  (3) if the user has changed the value in the chain of command, when he hits enter the modified value event fires.  Simply strike brace does not change the value and does not trigger the event.  Not control need to be erased, but the value that he has to change.  If you want to send the same command again, have a button send a command may be a better choice.

  (4) write is a case of the event.  It is not in parallel with anything.  The structure of the event do not monopolize resources.  The other loop will run while it waits.

  The event loop will not stop when you press the STOP button. Probably it wll take two command: change events of value after JUDGMENT before any loop stops.  Replace the Timeout event (which never expires) with a STOP: value change event and a real wire of this judgment to the Terminal endpoint.  Remove the local variable.  Make mechanical locking when released.

  Lynn

• iP8720 - wired USB and wifi at the same time?

  I sought an answer to this but have not found one that I really understand.  An iP87290 can be used as a wired printer and printer wifi simultaneously?

  I put up as a USB Wired printer on the office a year ago.  Works very well.  Now my wife wants to know if she can print on it from his laptop.  I have the wifi set up in the House and she often logs from the living room... as I have from my android tablet. What we do when she wants to print something, it is transferred to an SD card, then put the SD card in the office and printing from it.  Aging.  It would be much better if she could just walk into the 'office' and turn the printer on and print directly from his laptop.  I like to keep the printer connected to the desktop also.

  Thank you.

  Hi Muhammed.

  You can connect your PIXMA iP8720 to a computer with a USB cable and also use wireless with other computers and devices at the same time.

• How to use headphones and speakers at the same time

  I want to use headphones at the same time that I use the speakers.

  I am hard of hearing and need the LOUD volume. When others are watching a film, projected on HDTV, they won't let me turn the volume up to where I need it, which is why, headphones and speakers at the same time.

  I use Windows 7, I want to stick with Windows 7, so I want a Windows 7 solution.

  If there is no solution for Windows 7 and there is a solution using Windows 10, then and then only, I will be upgrading to Windows 10.

  Using headphones and speakers was possible under Windows XP. I think that a kid at Microsoft, with a regular audience, thought this feature was redundant and removed. Large.

  Macs will play through the headphones and speakers, so maybe it's time to buy a Mac!

  Hi Bob,

  Thanks for posting your query on the Microsoft Community.

  With the description, I understand that you want to use headphones and speakers at the same time on your Windows 7 computer. I will certainly help you get this fixed number.

  I suggest you check the suggestions contained in below mentioned thread and check if this is useful:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/headphones-speakers-at-the-same-time/7ed31bcf-3762-430D-9c9f-e6967d670d0e

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Can I use an antivirus on each of my hosts and guests at the same time when running a virtual environment on my PC?

  I have Windows 7 running on my main computer at present and that you have a virtual environment installed as an operating system on this computer very.

  I would like to know if I am able to run an internet security on my pc (Windows 7) host program and other internet security on my guest in my virtual environment operating system (pc windows 8)... at the same time.

  I ask this question because... I installed my OS of windows 8 in a virtual environment running inside my Windows 7 OS in order to familiarize yourself with the features of windows 8 and to test the compliance of windows 8 with various hardware components I use... to satisfy my curiosity before I migrate eventually completely to windows 8.

  Part of my tests would involve various software including Internet security applications.

  So the question is... I was able to save my virtual environment with an Internet security program, while having an Internet security program running in the host computer?

  PS my environments hosts and guests are not put networked with the exception of the common external drives and dvd burners. The plan being that the Internet security on my host computer program will have my analysis excluded virtual environment.

  Yes

  The systems are completely separated from each other, will not affect the different AntiVirus on another product.

  If you decide to test another Internet security program don't forget to completely remove the old version on the virtual machine

• the evaluation of aci software has problems with net.framework 3.5.1 can I download framework 4 and run at the same time as 3.5.1

  the evaluation of aci software has problems with net.framework 3.5.1 can I download framework 4 and run at the same time as 3.5.1

  the computer has windows 7 64 bit.

  IPEC software crashes and the error says that it has to do with the 3.5.1

  .NET 3.5 is part of installing win7

  .NET 4 and above is installed via windows update, important updates, and if your windows update is running, would have had to already be installed.

  Installing .net 4 does not .net 3.5