Wireless acting funny after having removed the PC on the home network - router WRT54G

Similar Questions

• HP Deskjet 3830: Printer connected by wireless worked well until someone joined the home network - looking for password now!

  I created my HP Deskjet 3830 yesterday and it worked on wireless connection. At no time was I asked a network security key.

  A colleague joined today to the home network (yesterday I was myself), and requested a key security network - to my surprise I was so.

  I put my wireless network password, and he says that it is evil. I used HP Print and Scan doctor to confirm the password (I guess that's the same thing as a "security key" - it was OK, but I keep being told it's wrong.)

  It is porrible that it is because my setup yesterday wasn't network but without straight wire? Or want to say I'm wrong?

  Other: since yesterday I have not changed anything or even restarted.

  Reset the printer to the default network. Now plug it back to your routers SSID with password. Try now. If Direct wireless is enabled in the printer, turn it off.

• After having removed the Vonage modem, computer can't find Linksys router

  Initially, I had my computer access the internet through a Linksys - Vonage - cable modem router.

  Recently, I dropped my Vonage service and get the modem.

  Now--even after the reset of the router and the modem - when I have a modem-router-computer-cable setup, I can't access the internet.

  However, if I connect the computer directly to the cable modem - I can access the internet.

  To solve the problem, I even bought a new modem. However, when I ran the linksys, software to install, it is unable to detect the router.

  Contacting Linksys on it - they have worked with me trying to get the old or the new router to work with Vista and the modem cable - and they claim that it is a problem of Vista, because I get the same error trying to put in place or the other router.

  Any ideas how to solve this problem?

  Hello

  Maybe this can help, http://www.ezlan.net/broadband.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• After having removed the Spanish language to off the computer I still Spanish not showing, how can I get rid of it?

  I write in Spanish for some letters and some messages and required special letters and accents of the language, so I installed the language pack for Spanish on my Win 7 ultimate, now I took it because he took some orders essentially has no sense and I always left overs and cannot remove them! Example: loads of I-tunes update in Spanish recalls, some applications of the internet are in Spanish, my calendar is in Spanish and have no option to change it, it's like a virus!

  His default. You can try to use English in the United States and see if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/install-or-change-a-display-language

• How can you cancel the download of an update that was started by after having pressed the button "Check for Updates" in the window "On Firefox", please?

  How can you cancel the download of an update that was started by after having pressed the button "Check for Updates" in the window "On Firefox", please? If possible, please cover all platforms, Mac, Windows, Linux, although the first mentioned is what currently applies to my situation.

  Thank you.

  Such a download is usually recorded in a updates or updates folder in the program folder or the Firefox application.
  You can delete this folder to cancel the download.

  If the files have already been downloaded, then delete the files in the folder updates\0 and updates.

  • http://KB.mozillazine.org/Updates_reported_when_running_newest_version
  • http://KB.mozillazine.org/Software_Update

  Mac: /Applications/Firefox.app/updates "/path_to/Firefox.app/Updated.app"
  Linux: "/path_to/firefox/updated"
  Windows: C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
  

• I received this error message after you remove the address something about Cloud.app

  I received this error message after you remove the address something Cloud.app.   Can you tell me how to fix this error message. "  '/'  "  ?

  Hello Phyllis,

  When you receive this error now?

  Let's run boot minimum troubleshooting to find the cause.

  Windows XP:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  Windows Vista and Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Please note that after refine us the cause, it is important that we return to a normal startup and manually delete the startup program.

  Best regards

  Matthew_Ha

• Why my drive showing full after having activated the bitlocker encryption? My d drive is 180 GB. only up to 20GB file is available

  Why my drive showing full after having activated the bitlocker encryption? My d drive is 180 GB. only up to 20GB file is available.

  If you want just a report of chkdsk on your C partition select Start, run, type "cmd" without the quotes in the box and press ENTER. Type chkdsk, and then press the ENTER key and a report, stating, among other things, a summary of how disk space is used, is provided. If you want a report on a partition or one drive other than C, you need to go to this partition. To access F, where F is the required partition you type F: and press the ENTER key.

  Copies of the reports from a command prompt can be tricky. Right click and select mark. This allows to highlight the selected text, and then click on copy. You will then open Word, Notepad or similar file, right click and paste. The selected text transfers your Clipboard to open the file. You can paste directly into a response message to the majority of the forums.

  In Windows 7, you can use a command-line high;
  http://www.SevenForums.com/tutorials/783-elevated-command-prompt.html

• Initially, I downloaded the application and was able to access all my photos by album, photostream, fb, etc.. Now, it will not go all. After you remove the application and try to download it, it says that I have to pay for it (yet) any help would be

  Initially, I downloaded the application and was able to access all my photos by album, photostream, fb, etc.. Now, it will not go all. After you remove the application and try to download it, it says that I have to pay for it (yet) any help would be appreciated.

  Sounds like a question of verification on any market that you have bought PS Touch. Have you tried contacting Google and Apple to see what they say?

• How install and run Acrobat Pro after having downloaded the trial without checking 'install '?

  How install and run Acrobat Pro after having downloaded the trial without checking 'install '?

  You can not.  You must check 'install' to install and run it.

• Unable to connect to the home network after you connect to the internet at Duke University

  Noteboook W7 Pro cannot reconnect to the network after you connect to the internet as a comments/visitor at Duke University.  The Duke system is predatory changes to my computer, and I can't fix it with the restoration of the system.   The home network is a Windows workgroup with most XP, no password only required machines.  This has happened in the past when the guest was an XP machine too, and then he had something to do with the DNS settings.  Cost me a lot of time and anguish and loss of productivity.

  Hello

  1. do you get an error message? If Yes, what is the exact full error message?

  2. are you able to connect to the internet?

  See the help article and check if it helps.

  Method 1

  Identify and resolve home network problems

  http://Windows.Microsoft.com/en-us/Windows7/identify-and-resolve-home-network-problems

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows#section_2

  Method 2: Check if the problem persists in the boot.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  See also:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know the status of the issue.

• to remove the old network

  I have an old computer from my office and remove the old network and the domain that was on it. I have the admin password. It's my business

  Thank you

  Kevin

  Hey Kevin,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

  Windows XP IT Pro category

• Cannot complete the home network implementation to include this computer as it can not be seen on the network.

  Original title: How can I remove a unidentified firewall running also apparently in Windows Firewall?

  Under Windows XP with the Windows Firewall and any other firewall unidentified. Cannot complete the home network implementation to include this computer as it can not be seen on the network. Able to ping outgoing to other computers in a network, but not able to ping inbound from other machines.

  Hello

  1. what makes you think that there are unidentified, firewalls running on the computer?
  2. what exactly happens when you try the home network configuration? You receive an error message?
  3. what exactly happens when you try to ping any computer on the network? Error message?
  4. what operating system is running on this computer? Also after return from the edition of these operating systems?

  See the following articles that might help you.
  How to troubleshoot a network home in Windows XP
  http://support.Microsoft.com/kb/308007

  5 steps: how to set up your network wireless home
  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

• Moved from home office computer. Try to connect to the home network. Working Group changed now it won't let me connect you to Windows. It is the search for field. What can I do now?

  My TI guy told me to do the following...

  go to my computer, and then click Properties. Then go in the name of the computer from a network to a working group. I entered the name of my working group. Then it tells me to restart so I did.

  Now when I try to get into windows that connect, when I enter the username and password he tells me to check and make sure that they are correct and check the field. It does give me an option to choose a domain.

  It's husband's computer and I need to run quickly. Any help would be appreciated.

  Note please. I am a novice user and that you will need as more detailed instructions you can give.

  Thank you

  Aimee Bushmaker

  Green Bay, WI

  BTW - Windows XP Professional is installed on the PC.

  Not good.

  When you remove a computer from a domain, and put in a workgroup, you must ensure that you have a local user account with administrative privileges created on the machine before removing the domain.  Maybe the built-in Administrator account will work, but in most domain environments, the default password [White] is replaced by a different password.  Microsoft has an article that deals with this:

  "You can not connect after you remove the computer from the domain.
    <>http://support.Microsoft.com/kb/317049 >

  Your technician COMPUTER should have known this would be a problem.  If you are a novice user and you can not access the built-in Administrator account, then your best bet to get must return to the domain and have your guys IT re - join to the domain.  Make sure you have a local user with administrative privileges created before withdrawing again to the field.

  Note that you normally will not have to remove a computer from a domain to make it work in a home-networking environment (working group).  You should be able to connect using the credentials cached [field] and your home network must always be visible to you.

  HTH,
  JW

• Satellite 650 d - WiFi drags on the home network

  I have a Satellite 650 d Windows 7 64-bit on a home network - there are two other (non-Toshiba) computers on the home network as well (both run W7 - 64-bit, 32-bit)

  Last week, when I turn on the Toshiba WiFi, it will drag down the overall speed the network about 10 MB less than 2 MB on download - and 2 MB less than 0.2 MB download. When I turn off the WiFi on the Toshiba, the network takes right to the top.

  I wonder if anyone has experienced this problem - and if so, what are some of the problems potential I should look for to try to solve it?

  I already tried updating drivers wireless on Toshiba site - with no difficulty on this end... so looking for other opportunities to meditate

  Hi crazyhorse_1,

  What laptop Satellite you have exactly? Is it Satellite C650D, L650D or what exactly?

  As you can see here in the forum issues wireless are hundreds of discussions on the problems of WIFI and I believe that you can find an answer in the other threads. I did a search of the forum and found some interesting discussions like these ones:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?threadID=61331
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=60290

  If you have any other questions, just post again ;)

• Error code: 0 x 80070490, trying to connect to the home network

  Original title: 0 x 80070490

  Received this error code when you try to connect to the home network.

  Hi Joseph,.

  Did you the latest changes on the system?

  You can try to temporarily disable third-party antivirus software and firewall installed on your computer and check if the problem persists. If the problem is resolved, you will need to uninstall the software and reinstall it back or change the settings and check.

  Note: Be sure to enable the security software on the computer after checking.