Wireless adapter does not Pickup 5 GHz [e4200]

Similar Questions

• Satellite Pro L40 - wireless adapter does not work - Vista

  I recently had some problems with my laptop.
  A couple of weeks, I put in a disc of OpenSuse.
  It's not stable anything, but locked me out of my original Vista operating system.

  I reinstallled Vista Home Basic, but there are a few problems.
  Mainly, my wireless adapter does not work.

  When I flip the button to turn it on nothing happens and it is not recognized in Windows.
  I installed Atheros Driver, but still nothing happens, light is not yet.

  Any advice?

  Hello

  First check the device-> network adapters area manager
  You see the WLan card? Or the unknown device appears?

  If there is an unknown device, then the WLan driver has not been installed correctly or you tried to install a driver badly these two options are possible.

  Remember that your wireless network card? Maybe it was a Realtek WLan card?

  If it's a Realtek WLan card, try the WLan driver from the Realtek website and look for 802.11 g (RTL8187B) chip or you will simply check the page of the European driver Toshiba too the Realtek WLan driver also appeared on the Toshiba page

• Cannot install WIndows XP SP3 - wireless adapter does not work with any package of service beyond 2.0

  original title: wireless adapter does not work with any package of service beyond 2.0

  I have an AirLiink 101 wireless adapter.  Anyone know how to change the service pack 3.0 for me to update my Windows XP?   Can not install 3.1 without losing wireless connection.

  Thanks for any help.

  If you are on a wireless connection, try to switch to a wired connection and try the download with Internet Explorer.

  UTC/GMT is 06:49 on Wednesday, April 11, 2012

• Wireless adapter does not work.

  Original title: wireless

  I install win7 in my fujitsu siemens AMILO Li 1718 model system, all the drivers are installed but I have problem with my wireless, wireless is not see the amything all available wireless driver is installed courrently can someone help me solve this problem

  Hi Amy,

  It seems that your wireless adapter does not work.

  There is no Windows 7 drivers for your model. You can check this link for simple information.

  http://support.TS.Fujitsu.com/download/ShowDescription.asp?SoftwareGUID=689AC3EC-583D-4B7F-8D1A-CED2F9D7EED8&info=FTS

  I suggest you to visit the above link and download Vista drivers for your wireless card. Install them in compatibility mode.

  Refer to this link: make sure to run older programs in this version of Windows.

  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  If the problem persists, I suggest you contact Fujitsu support:

  http://Forum.TS.Fujitsu.com/forum/viewforum.php?f=89&SID=1856691d77caf93b0cf1e8058e951cd4

  I hope this helps.

• WUSB600N wireless adapter does not work if hooked up to Windows startup

  I have the adapter WUSB600N wireless, and I use it with Windows 7 Ultimate 64-bit. I use the latest available driver, 3.0.10.0. When Windows first starts, the adapter does not work properly and is unable to connect to any network, regardless of how long wait. If I unplug it and plug it back after that Windows is already running, I don't have this problem. This does not work when the "reboot" of the machine; only when turning the power off and then on again.

  Do you have an error message when attempting to connect to the wireless network?

  Try to uninstall and reinstall the wireless card and see if that helps you.

• Wireless adapter does not

  recently restored my HP Pavilion DV6-6C35DX, and now the wireless card does not work

  It appears in the device as Realtek PCIe GBE Family Controller Manager

  the hardware id is PCI/VEN_10EC & DEV_8168 & SUBSYS_1805103C & REV_06

  I tried to search for the drivers but can't seem to find a

  any help would be greatly appreciated

  Thanks in advance

  not 100% sure how mark as resolved, but in the meantime eventually, fortunately the pilot

  Thanks for all of you who have seen this, but as I'm sure someone would have helped me

• HP Pavilion dv6t-7000: Ralink RT5390R wireless adapter does not connect to 802.11n network

  I have a HP Pavilion dv6t-7000, equipped with the Ralink RT5390R wireless adapter.  For the life of me, I can't get it to connect to my home network when implemented as 802.11n.  They connect other devices. If I change my router 802.11 g, but no other change, doe HP connect. But if I return the router to 802.11n, HP sees the network, and it correctly identifies as a 802.11n network, but does not connect.

  The router is a D - Link DIR-615 (N300 2.4 ghz)

  All this experience? All solutions?

  Woo-Hoo.

  Found a solution.  Both HP and windows said I had the most current drivers, but this HP forum had a link to a newer driver.  Installed and it worked.

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/Wi-Fi-problems-HP-Pavilion-G7-1338dx-notebook-PC/m-p/1836467#M33729

• RALink RT5390 wireless adapter does not work

  My g6 pavilion laptop wifi adapter was not properly work recently. my internet router and networking are works well as it should, but whenever I restart my laptop, repeat me that there is no link and no other wifi networks when there are clearly other networks because of my neighbors.

  I tried a system restore to solve the problem, but it has no effect and my norton affects the restoration of the system to disable the antivirus.

  I'm stuck on ideas to solve this problem and I don't know much about networking and internet stuff, so I'm pretty powerless here

  Here is a link to my features of laptops if necessary:

  http://support.HP.com/us-en/document/c03136241

  These ralink adapters are simple ol ' sh * t. I don't know if it will be a complete solution for you, but I was pulling with my network card for months and this has proved to be the most effective for my computer. I have a HP Envy luck to be equipped with a Ralink RT3290, Windows 8.

  so...

  Out of the box, my computer was working fine and it connected to the network OK. As soon as I moved further away from the router, I known constant dropouts, and the connection always folds between the low signal strength, to completely disconnect the router, where I had to re - connect manually there. This question really frustrating. I use my computer on the top level of my house, and the router is in the basement. If I was getting sick of this fast. Update driver after update driver, no luck. After trying everything under the Sun, I decided I would bite the bullet and I tried something a little bit Orthodox...

  I just uninstalled the driver for my computer. Yes, really. When a component on your computer a driver is stripped, Windows software has a few drivers that will install by default for your material so that it can remain functional on your computer. So, once remove the driver ralink on my computer, windows installed sound driver by default for my network card and... Voila! My connection problems are virtually non-existent at this point. The material is not always the best, but at least I can surf the net in my room without my connection affected by constant stalling.

  Now, other that the light on the button stuck wireless with an orange glow and list my NIC as #10 Device Manager, I always use this driver with minimum questions. Occasionally, he'll forget the connection once I wake the laptop from sleep, but this issue has been much worse with the ralink drivers than without.

  If you are aware of the risk (what is low, to be realistic, this can always be undone and you can always reinstall drivers ralink so that deosn proved to be an effective solution), I will explain in detail how I managed to do.

  (1) open Device Manager (right click the lower left corner in windows 8 and a shortcut appears in the drop-down below)

  (2) find network adapters and display its contents

  (3) make a right click on your wireless network adapter (should be something similar to "Ralink RT5390 802.11b/g/n... ") and click on"Uninstall"in the menu drop-down

  (4) a popup should appear and you should be given the possibility to uninstall or cancel it. Make sure you check "suppression software driver for this device" until you go forward, or Windows re - install the ralink driver.

  -Search for new hardware if your network card is not detected after you have uninstalled it. Your card should appear as "802.11n Wireless LAN card"

  -If you have an installer driver ralink that is newer or equal to the driver that is already installed, you can run the Setup program to remove any driver software remains which is usually overlooked by the device during the uninstallation Manager there from your computer

  -As an option, you can check potential driver leftover files C:\Windows\System32\Drivers. It is important to search for remains that Device Manager / ralink Installer may have missed because it can potentially conflict with the replacement of windows WLAN driver. pilots should have a short name for your adapter (e.g. rt3298.sys); they shouldn't be hard to find. Be careful as well; IT IS WISE TO ALWAYS SAVE no matter WHAT DRIVER SOFTWARE, YOU CAN REMOVE in CASE YOU MAKE a MISTAKE.

  (5) re - enter your information network and you should be good to go!

  I hope that it is of no help to you. People who know nothing about what they will tell you to install the latest driver and yatta yatta yatta this way, because it does not work I had to take the liberty to try to find a solution for these adapters cursed myself. I hope this helps a bit your question!

• New wireless adapter does not connect to my router

  at home, I have a wireless router WRT120N set up for wireless internet connections, I also use the wireless adapter that comes with it. I recently bought a new adapter wireless like this: http://global.level1.com/product_d.php?id=891 and it connect to the router? Help, please

  I think that the wireless connection on your router may not work properly.

  Create a new wireless network.

  Connect the computer to the router with the Ethernet cable. Open the router setup page and go to the Wireless tab, change the name of the SSID wireless network to create a new wireless network. Change the channel to 11. Save the settings.

  Go to the tab of sup of wireless security and check the security settings. Make sure you have the key/password network correct.

  Go to the sub-tab to Wireless MAC filter and make sure that it is disabled.

  Go into the settings wireless Advanced tab change the interval of tag to 75, RTS and Fragmentation threshold to 2304. Save the settings.

  Now ty to connect to the new wireless network.

  If this does not work then try upgrading/re-Flash the firmware on your router.

  Connect the computer to the router with the Ethernet cable.

  Download the latest firmware from the site Web of Linksys and save it to your computer. Open the router configuration page and update the firmware on your router. After upgrading the firmware of your router, reset the router and reconfigure.

  Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 30 seconds. Power cycle the router and reconfigure.

• D Link Wireless Adapter does not work with Windows 7

  I looked in the Windows Compatibility Center and it says my D-Link WUA-2340 wireless adapter is compatible with Windows 7. Our newest computer can see my wireless network, but does not connect. Worked fine with Vista. Then it is compatible or not? I downloaded the latest drivers from the D-Link's Web site, this version is one year old. Support D-link told me that it is not compatible with Win 7. They say that it is not. MS says it's. It does not connect. Anyone know what is happening? I do not have to buy a new adapter.

  Hi Mike,.

  Welcome to the Microsoft Answers site!

  D Link WUA-2340 is compatible with Windows 7, but you will need to download the software of your product from the link below. Select the appropriate Version of the operating system before you download.

  http://tinyurl.com/ykghke4

  You can also try to change the settings of the firewall at various levels and check if that helps.

  1. Open Windows Firewall click on the Start button and then click Control Panel.
  2. In the search box, type firewall, and then click Windows Firewall.

  For more details on the settings of the firewall, follow the link

  Understanding Windows Firewall settings

  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-Firewall-settings

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP dv6-6c10us: HP dv6-6c10us Broadcom 802.11n wireless adapter does not work after windows 10 installed

  I have a laptop HP dv6-6c10us with a Broadcom 802.11n wireless adapter.  It worked fine on Win 7.  When I upgraded to win 10, it has stopped working.  The driver has not been updated since 06/02/13.

  Until the driver is updated by Broadcom or HP, this computer is now a desktop computer.

  Any suggestions on how to get the adapter wireless on Windows 10?

  I recommend you to go back and do a system restore to a point before started to install the automatic updates, and where worked the wireless.

  Then download this tool that stops updates to install automatically.

  https://support.Microsoft.com/en-us/KB/3073930

  Hide all of them and then install one by one until you find the one that is to destroy the wireless connection.

  When you have found the culprit just hide it again and it will not be installed.

  You can create a system restore point each time you install an update.

  Tedious, but you should get where you want to be.

• Satellite A660 - Broadcom internal wireless adapter does not work

  Hi all

  My first post to this forum - I have a new laptop of Toshiba Satellite A660 - only had for about 4 weeks and it turns out be a disaster for me...

  Firstly - I spend weeks getting everything on and configured as I want - then the hard drive begins to die...

  I just returned it service center Toshiba and NOW wifi has stopped working...
  Internal broadcom wireless adapter doesn't work - but according to windows and built-in Diagnostics it works...

  HOWEVER - when I try to use wireless with the built-in adapter may not detect all wireless networks...

  I then plug in my adapter netgear usb wireless backup and I can pick up and connect both of my wireless home networks...
  I am moving abroad in a few weeks and need to know that my laptop will work/be reliable and not have any problems-if anyone can help me with this, it would be much appreciated.

  John.

  Before starting the scan for available wireless networks you have activated WLAN card correctly?
  Orange is WHAT turned on WIFI?

• HP 2000-2d0EM wireless adapter does not

  Hello.

  I need help with my new computer laptop moel list above.

  I bought it in a store in Croatia one yesteray installs my own windos 7.

  Somehow the funcion keys only turn on the bluetooth adapter and not the wireless network adapter.

  I am currentley on my other PC, trying to find the solution.

  Do anyone know where to find recalcitrant pilots, so I can download them and usa a USB key to install on this model: Hp 2000-2d0EM prouct number F4U07EA #BED?

  Have you tried this graphics driver?

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?spf_p.tpst=swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D2%257CswItem%253Dob_106880_1%257CswEnvOID%253D%257CitemLocale%253D%257CswLang%253D%257Cmode%253D4%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  You need this for the wired network card driver... PCI\VEN_10EC & DEV_8168

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5229457 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123192_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

• Qualcomm Atheros AR9485 HP 14-b173cl wireless adapter does not

  I have a Pavilion Touchsmart model 14-b173cl upgraded to Windows 8.1.  Everything works except for the wireless adapter.  When I run the Diagnostics on the adapter windows returns an error indicating that there may be a problem with the driver.  I have installed and reinstalled the latest version of the driver several times without success. The wireless adapter worked fine until I updated the driver version 10.0.0.263 by following the instructions in the HP support assistant.

  Is there something wrong with the driver?

  How can I go back to the old driver?  He was working with window 8.1 before I loaded updated driver.

  Hello hilldouga1,

  I'm glad you found a resolution to your problem. If my last post did not solve your problem I would have recommended a factory reset. To restore your files I set out some steps for to follow you:

  Step 1. Scan from the right edge of the screen

  Step 2. Tap search (or if you use a mouse, point to the upper right of the screen, move the pointer of the mouse down, and then click Search)

  Step 3. Enter restore your files in the search box

  Step 4. Press or click on restore your files with the file history
  Step 5. Enter the name of the file you're looking for in the search box or use the left and right arrows to navigate through the different versions of your files and folders

  Step 6. Select what you want to restore to its original location

  Step 7. Press or click the button restore

  This should restore your backed up files files. Thanks again for the display on the HP Forums. Have a great day!

• my wireless adapter does not pick up all the signals... I don't know why... Please help!

  I'm not sure why I can't my wireless dlink adapter cannot pick up all signals?

  anyone enlighten us?

  Hello

  1. what exactly happens when you try to connect to the Internet?

  2. you get any error message?

  3 have there been recent changes to the computer before the show?

  I suggest you to try the steps mentioned in the link and check if this may help.

  Method 1: Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check this link for more information:

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Hope this information is useful.