wireless adapter is gone and the extension display not working after hibernation
my laptop is a thinkpad X201s, os is windows 7, 32 bit, ultimate, English
I used wireless home and my laptop is discharged, it is put into hibernation automatically
the next day, I went to the office, plug power adapter and turn on the computer
then I found wireless does not work, so I opened 'Control network and Internet\Network connections', there is no wireless icon. then I open "Device Manager", there is no wireless network adapter in network adapters
and another bad thing is when I extend my screen with another monitor, the second screen shows nothing and the monitor does not work, it does not work in another computer, it seems necessary to fix. but it works before
and I change a new monitor to connect my laptop display of the extension does not work, but the monitor can work in another computer, that's fine.
and I restarted computer, no help.
Finally I found the solution for wireless, first computer shutdown and plug-out the power adapter (it is very important), wait 30 seconds, then plug power adapter and restart the computer, wireless, great work
now, the extension display function still does not work. I guess that the display extension PIN does not work, maybe need repaired
Hi Jacky,.
Jayant.
Tags: Windows
Similar Questions
-
As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0
This may be caused by the Tab Mix Plus extension
Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).
- Do not click on the reset button on the start safe mode window or make changes.
- https://support.Mozilla.org/KB/safe+mode
- https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
You can try to install the latest Dev version of Tab Mix more if you use this extension.
See the sticky on the forum of Tab Mix Plus:
-
Keyboard and the mouse does not work after the release of sleep
Original title: error keyboard and mouse
After you have installed Windows 8 I had problems with the keyboard and the mouse.If the computer disconnects a half our for example, when I come back, the keyboard and the mouse do not work,I can not connect and I have to restart my computer to the power button.How can I avoid this problem? It happens every day at least once.Hello
1. you are using a wired keyboard or mouse and wireless?2. What is the brand and model of the PC?3. have you checked if other USB devices work on the PC after you resume the computer from sleep mode?I suggest you follow these methods and check if it helps.
Method 1:
If you use the USB keyboard and mouse, and then follow the steps below to uninstall and reinstall the USB controllers.(a) press the Windows logo and X from the keyboard.
(b) type devmgmt.msc , and then press ENTER.
(c) expand Bus USB controllers.
(d) right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
(e) restart the computer and reinstall the USB controllers.
(f), check the question;
Method 2:The 'USB selective suspend settings' option in the Power Options can be activated.
(a) press X and WWindows logo and choose Power Options
(b) click on change plan settings for the selected power plan
(c) click on that to change advanced power settings
(d) Expand USB settings and then the USB selective suspend setting and change them to disabled.
(e) click OK in the power settings window, and then click save changes in the Edit Plan settings window.Method 3:
If this does not help, I suggest to change the power to its default settings and check if it helps.You can follow the steps to do this:
(a) press the Windows logo key and X set and choose power options.
(b) under the preferred plans, click on balanced (Recommended).
(c), click Change Plan settings and more balanced (Recommended) option.
(d) click on restore default settings for this plan on .
(e) click Yes to save the changes.Now check the issue.
Let us know if it helps. If the problem persists, please answer, we will be happy to help you further.
-
I noticed that my computer felt a bit slow so I uninstalled a few programs that I knew were not very helpful so I restarted my laptop, and then the network and the sound does not work.
I tried to use the system restore, but that does not work either and I tried to online solutions, but nothing works.
Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should helphttp://captaindbg.com/how-to-update-drivers-on-Windows-7/ (also works on Windows 8) -
Internet and the sound does not work after the ATU Vista 64-bit
I really didn't want to display in the hope I would find the answer using Google, as I did in the past, but this one i can not find the answer for. 2 days ago I d/l a program called Advanced System Care. I was told by 3 of my friends it works well to clean your junk files, Defragging ect ect.
After d/l and the operation of the program, I had to leave and shut down the system. Today I start everything is fine, and then I noticed that I have a red X on my speakers. This is not the red X you get when cut there a smaller lower-right next to the speaker in the toolbar. When I mouse over it, it says "Service Audio work not" when I click it to repair, so good it shows all is working (volume mixer control is non-interactive) then I go to control panel and click on the speaker and I get "this computer cannot play audio because the windows audio service is not enabled.» You want to enable "I click Yes and it brings back me just in the region, that I was when I clicked on the small speaker in the toolbar with the red x.» Everything always looks the same as it was when I put in place.
Is there anything else I can look?
Second problem happened at the same time. I have the same red x on my 2 computer screen in the toolbar on the bottom right. When I try to repair it it says this "this service cannot be started because it is disabled or because it has no enabled devices associated ' when I go to Device Manager and check to see if it is still showing my d-link wireless there is black! on a yellow background. When I try to access the computer to find local internet connections, it says that it can't find. I know that my Linksys is working because my Iphone is connected. I already tried to install a cord between my router and my system and it still does not notice the internet even when you try to reconfigure.
I read where I can make a dirty windows vista installation and fix it. but I really hope that there is a better way. I also tried to restore my computer to last week when I made a back up and it seems after the use of this program, that he got rid of that as well. So now im out with to be able to roll back before I D/L this close program useless lol
I'm using Vista ult 64 bit, that the computer is built for gaming and music. OCed Q6600 to 3.2 4gig ram 8800gt 2 in sli on a configuration card XFX mother if any other system or other questions please do not hesitate to ask. I hope that someone has had this problem and can help me to solve it. I don't want to reformat my HD or what I really want to pay Microsoft to talk to them on the phone
Thanks for your help
After 3 hours on the phone with the microsoft problem solved. Seems some how using CSA and the update of microsoft it limited my computer to start all programs at startup.
-
Keyboard and the mouse do not work after upgrade to Windows 7.
The operating system on this computer is Windows 7 Professional (64 bit), and the following updates are available:
MS Security Essentials:
Update for Microsoft Security Essentials - 4.7.205.0 (KB2994766) - ImportantWindows 7:
Cumulative Security Update for Internet Explorer 11 for Windows 7 for systems based on the x 64 (KB3021952) - ImportantUpdate for Windows 7 security for systems based on the x 64 (KB3004361) - Important
Update for Windows 7 security for systems based on the x 64 (KB3004375) - Important
Update for Windows 7 security for systems based on the x 64 (KB3013455) - Important
Update for Windows 7 security for systems based on the x 64 (KB3023562) - Important
Update for Windows 7 security for systems based on the x 64 (KB3029944) - Important
Update for Windows 7 security for systems based on the x 64 (KB3031432) - Important
Update for Windows 7 for x 64-based systems (KB3004394) - recommended
Update for Windows 7 for x 64-based systems (KB3020338) - recommended
Update for Windows 7 for x 64-based systems (KB3021917) - recommendedX 64-February Windows malicious software removal tool (KB890830) 2015 - Important
The problems begin after that I installed these updates. After restarting the computer, I can no longer use my (HP SK - 2506 U) keyboard and mouse (Microsoft Wheel Mouse Optical). I have looked around through the forums and tried several suggestions; However, none have them worked, that's why I post here.
For example, here are the methods that I've tried so far, while using a PS/2 keyboard connected:
(1) to start the computer in safe mode only to find out that they keyboard and mouse don't always work.
(2) went in mode Bios and the keyboard works until I leave.
(3) Microsoft Fix It tool I tried for USB devices and he said that "the changes have been made", but it does not solve the problem.
(4) I went to the Control Panel, type "Troubleshoot" > find and fix problems > material and audio > configuration of a device, and he says: "material changes may not have been detected."
(5) download the drivers on their site, but they will not be installed because 'the latest version is already installed. "
6) going to remove each USB root hub in Device Manager, and then restart the computer to reinstall the drivers. The computer recognizes the 'new' devices,
but then fails to install. Also, when I check their error on each of the USB status then in Device Manager, I get an error (code 52).(7) I also tried to install an update, restart the computer and then install the update next to try to reduce down which one is causing the problem. However, this method does no more work. For example, I installed an update, then restarted the computer, and it would be nice. Then install the next update, and the problem would come back. I would therefore restore to a point earlier, thinking that the second update has been the cause of the problem only discover that the problem came back after first re-installation...
I also tried to run a backup of my external hard drive, but it does not work. I also tried to create a system repair disc, and it fails too.
So far, the only way I can "fix" this problem is if I restore my computer to an earlier point in the day and then hide all updates to install automatically.
Now I'm wondering if anyone knows why these problems are happening or fix them for good?
Hi Floyd,
I appreciate the efforts that you have taken to solve the problem in a few important steps. Since it is a problem that occurs when you try to install updates for Windows, the driver may be signed or corrupted.
Just a few questions in order to get a clear picture of the issue.
1. make all the windows updates installed successfully?
2. What is the full error message you see in Device Manager?
Follow the thread and check them off below if it helps.
I MPORTANT this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756/
If the problem is not resolved, you can put the computer in a clean boot and check if it helps.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
http://support.Microsoft.com/kb/929135
Note: after the boot minimum troubleshooting steps, see how to reset the computer to start as usual after a clean boot troubleshooting.Get back to us if the problem persists.
-
Brother printer and the scanner does not work after Windows Update.
Separated from this thread.
I have the same problem with my Brother ADS2000 scanner and my multi MFCJ4710. I can print with the MFC, but the Control Center detects or scanners. They worked and suddenly stopped. I wonder if Windows update changed something? Scanners both work with Windows Fax and Scan, but not Brother Control Center 4. I called support of brother and again, they have said something about TWAIN and I have to do some registry clean. I tried their manual steps, they sent with the registry fixes and which totally screwed up on my computer. I had to do a restore and now back to square one.
Any solution out there?
It was my dose,
(1) start search box type menu "user accounts".
(2) open and select "user account control settings."
(3) to change the cursor to "never notify".
(4) 'ok' to save
(5) fact! You may need to restart you machine.
PS: this was my fix, it was caused by software AVG anti-virus, AVG has replaced this setting and would fail to wireless for my scanner. It will be useful.
Rob
-
Satellite M30-604 freezes and the fan does not work after replacing
Satellite SM30-604. Laptop has left the mat from one day to the next and overheated! Fan won't spin and laptop start only occasionally. Thinking that the fan was fault I replaced the fan but even this new fan doesn't spin. The heat sink is totally clean - dust free inside the fins at all. The laptop is only 2 years.
Cooling using forced (by sticking a nozzle of aspiration to the output of the cooling fan!) the laptop starts sometimes as normal until the desktop screen with all of the usual icons and no error message. But then, it does not further - the freezing of the screen, keyboard and mouse.
Most of the time it does not start at all. When it does not start, the blue LED lights up but there is no hard disk activity or LCD at all - even the wifi LED lights even.
Really grateful if someone knows what's going on. You are not sure if it is the main processor that is defective?
Thanks in advance.
Charlie
Hello, Charlie
As you know on this path is not easy to give an accurate diagnosis, but according to your assignment, I guess there is a complex problem and unit must be properly verified. I also think that there must be a problem with the electronics.
It is really possible that the motherboard needs to be replaced but, as I already said, it is not possible to say something specific about your problem. Try contacting Asp and you will see what they say.
Good bye
-
My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n
A variety of phenomena can affect the performance of its wireless network. You may be able to mitigate some negative effects.
Solutions to any factors that may have an impact on your wireless network, read use the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support.
-
I have my black getit monitor and the computer does not respound after 2 mnts when I start playing games online
Hello
1. what operating system is installed on the computer?
2. what web browser are you using to play the games online?
3. don't you make changes to the computer before the show?If you use Internet Explorer, then I suggest you to try the steps from the following link:
The problems of games online using Internet Explorer
http://support.Microsoft.com/kb/2528246
Additional information:
Why my screen is black when I start Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7Solve game problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-game-problemsThe problems of the game performance
http://Windows.Microsoft.com/en-us/Windows-Vista/fixing-game-performance-problemsTroubleshoot display with Microsoft games
http://support.Microsoft.com/kb/263039 -
Satellite W30T-A378 from - touch pad and the keyboard does not work
I have a problem with my laptop, the touch pad and the keyboard does not work.
Can someone help me what is the possible cause?Thanks in advance.
Hello
I guess you checked if the Tablet has been properly connected to the docking keyboard.
Have you tried to unplug and plug the docking again?
Note: there is a latch on the left you have to move and in order to remove the tablet.Perhaps there is a connection problem.
-
Tried the upgrade of Windows 10 initially, but it failed with "lack of disk space", then installed full media and all but the Audio and the camera does not work.
Hi all
I would just like to make the point that there is a fix that has been made available and applications for a Windows Update is also underway. I'll link directly to the file located on our page drivers and downloads.
Patch
Acer
1. fix camera function fail after upgrade to Win10 TH2.
20160506
91.7 MB
30/05/2016
Download
Thank you
Cory -
CD drive does not open and the light does not work
original title: single CD player problem
The problem with my CD player seems to be unique I can't find an answer, or someone else with the same problem online.
My computer is custom built, the CD player lasted me 1.5 years no problem, not until one day I realize, it does not open and the light does not work on it, I ordered a new drive and installed that one, still does not work. so, I replaced the SATA cable which connects to the motherboard, still does not.
When I go to my computer the drive appears but when I right click > eject it says: "year error occurred while ejecting CD drive D". It also appears in devices such as SCSI CdRom Device Manager but I am not sure if it's actually my CD player.
I also tried troubleshooting http://support.microsoft.com/gp/cd_dvd_drive_problems and no solution.
WTFFF ideas? I really hope that its not the motherboard
There are two cables you need to connect to the drive, one for data and one for power. You must connect both training at work. If you only have the data cable is plugged and not cable power which would be a possible cause of the problem that you see.
"Ryanb1290" wrote in the new message: * e-mail address is removed from the privacy... *
Sorry, im just of knowledge about computer hardware. you say that I should try a different agreement or another port to plug in?
I tried to connect on a couple different SATA ports on the motherboard.
-
C1765 done yellow toner a printer roller noise rattling and the printer does not work
Hear a clicking noise when printing. Replaced the yellow toner and the rattling is still strong and the printer will not work. The noise and the vibration felt on the new toner only occurs with the yellow toner. What is happening, is the printer goes wrong. "low density, yellow to replace the cartridge, printer restart" I just put in a new cartridge.
Hello David,.
Please post on the forum. According to the information you provided, it looks like you have a mechanical failure within the printer itself. This device is more compact and carriers Dell limited parts, the best option at this stage would be to replace the printer. It is the course of action we would take if the product is under warranty.
Kind regards
Joseph E -
My Roxio VHS TO DVD movie editing program has worked on my laptop Toshiba Windows 7 system before I reformatted. Now when I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work. When I close the program Roxio the resolution of the screen reverts back to 256 colors. Control of program compatibility tells that it's incompatible, but the program worked on my system before I reformatted.
Original title: programs Application Applications compatibility
Hello
You can install the program in compatibility mode and check if it helps.
Make older programs in this version of Windows
http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows
Let us know the status.
Maybe you are looking for
-
Hello I have this notebook since 2013 he was running windows 8.0 I try to update to woindows 8.1 without success. And I saw someone on the forum said if back BIOS do return to the old version 01.05. I tried it did not help. Then I try to update the b
-
I use vista and if I put a .jpg on the desktop image I open it with any normal program 'open with', with the exception of the Windows Photo Gallery. If I create a folder on the desktop and then to move the image in the folder it opens very well as us
-
How can I fix the run-time error '75': path/file access error and have Windows 7
I am trying to open a program DicomWorks and get the above error. I see only solutions for Vista users...
-
Windows 7 is installed, now missing "Mass storage controller" driver (Code 28)
I installed Windows 7 (32 bit) and Bishop of device under the heading "Other devices" Windows could not find the device driver for the "mass storage controller". My motherboard is an Asus P5AD2 - E Premium. Device type: other devicesManufacturer: un
-
How many sessions/users can go on a 5506 X with a dry more than the license? Any involved a VPN site-to site a 5506 a 5515 X X? Or is this done as I have done in the past with of 5505? Thank you Pete