Wireless adapter issues):

Similar Questions

• Envy 14-3010NR wireless adapter issues, this is a strange...

  Hello, I have a 3010NR Envy14 spectrum with Intel Centrino Advanced N6230 wireless adapter. Driver is 15.9.0.5 dated 16/06/13 dated. I've updated the operating system first to W8 and then to W8.1, since I had problems with the wireless, I had to work at some point after the update of the bios F.06, then when I started the other day, wireless.

  I have search in the diagnosis of F2 and it says that the adapter is not installed, when I do a test of component... However when I go to Device Manager / network adapters / click on display / hidden devices, this is, when I look in the properties, he said ""currently this hardware device is not connected to the computer"(code45)". "" To solve this problem reconnect you this hardware device to the computer.

  I also have the same problem with the wireless button on the keyboard that I see a lot of people, when I press on it now it switches airplane mode on and outside, where it is used to turn the WiFi on and off... It's always a white light, the orange light that lights up when wi/fi was off is now gone...

  Notice to fans, it's really weird... Thanks in advance

  Hey jagnewr,

  Thank you for all the information in your message. For the error code that you get in the Device Manager, it means that the device is connected is no longer http://bit.ly/18I67As.

  I've included the manual 'Guide to Service and Maintenance HP ENVY14 SPECTRUM'. Please open page 52 and follow the steps to remove the WLAN module. Remove and reset the module.

  If you are still not able to connect, and the error code 45 is still present it most likely that the wireless card no longer works.

  Good luck!

• Acer e5 - 571c, atheros wireless adapter issue on windows10 956 x

  Hello. It is Abdullah zafar, CEO of "blind aid project." I use acer e5 - 571c laptop with Windows 10-1607. The drivers and OS all are updated, but still the wi - fi is not so reliable. The adapter is atheros 956 x wireless network adapter. Drivers are downloaded from the acer site. Please suggest me any other driver for this card properly supported on win10x64. It will be very useful for me

  Hi zak,.

  Try this version of the driver and tell us how it rates.

  http://www.station-drivers.com/index.php?option=com_remository&Itemid=353&func=FileInfo&ID=1767&lang...

• Reinstall the wireless adapter issues

  I just had to do a recovery on my system last night after serious problems and as such I am back to square 1. I am trying to reinstall my Linksys Wireless-G USB Network Adapter (model # WUSB54G S ver. 2) and unfortunately I lost my CD for it. I downloaded driver for v.2 data and tried to make a facility a couple of times and I can't get the adapter is properly recognized. Even attaching to the cable part of the network display anything. Is there a separate file, I'm only away/can get that is specifically for the adapter, since I don't plan on using the wireless monitor software? Any information on the situation would be greatly appreciated.

  Scratch that, figured it out. A letter was missing when I was the driver, fixed selection and now it's all workers

• ENVY of HP dv7 - 7243cl wireless adapter issues

  Hi all

  I have recently purchase a refurbished HP ENVY dv7-7243 CL overall I am satisfied with the product with the exception of a massive show. I have serious problems with the edge of network card range. I'm holding the phone right next to the router and I get only 3 of the 5 bars. It is not a router problem as I have several other devices that connect perfectly across the House. Any help at all is greatly appreciated.

  EDIT: I uninstalled and then reinstalled the driver, nothing helps.

  Had the same problem and support has me remove the cover back, then reconnect the wireless antennas.  Went well after that.  Suggest that you call the assistance for this info on how to do it properly.  I'm sure you will agree that it's a quality issue with a new machine.

• How to activate the wireless adapter

  I currently have a HP Pavilion 17 computer laptop with Windows 7 Professional.  A few times in the past in the unit's wireless adapter stopped working.  I don't remember what I did to get it working again, then however at this time I can not activate even if I followed all the steps to change the settings of the adapter on the network and sharing Center.  When I select Connect, it simply shows that it is not connected.  Nothing I have tried seems to help.  I have a unit of Belkin Wi - Fi that works and my laptop runs as long as I have an Ethernet cable connected.  However if I disconnect the cable from the laptop does not connect via wireless adapter.  In the past he would always stay connected to the Wi - Fi connection even if I disconnected the cable.  Please give me any thoughts you had to solve it.  Thanks in advance for your efforts and help.

  I just wanted to know that I found the solution to my problem with the help of a response of the same issue posted last year.  Repeated pressing the F12 key with the picture of an airplane on the wireless card.  Forgive my ignorance, but thanks to all who took time to try to help me.

  OldmanDon

• PC HP Pavilion 15 15-p001tx: control wifi wireless connectivity issues

  Hello
  Member of the Community/Forum
  
  Model name - laptop Hp Pavilion 15 (15-p001TX)
  Questions - Brodcomm 802.11n wireless adapter not Worming.
  
  Problems-
  I was faced with the same problem for 4 days and I tried all possible means to resolve out, but nothing works.
  
  Problems are the following:-

  1) Wifi stopped working 15 minutes to restart the computer and the wifi icon is automatically limited, and then it automatically become the LAN (small PC icon) and after this phone get hanged every time.
  
  to re work I need for wtich forcefully from the power button.
  
  2) I followed all the tips and tricks to solve the problem and even take a Hp support helps solve this problem of wifi. but nothing works... no one has helped me on this problem.
  
  Here are the ways I've tried.
  
  1. that tick managent of power, I have UN ticked (from PROPERTIES)
  
  2. using the CMD, I reset
  
  3. I DID cofig automatic Wlan disable (and put it on startup)
  
  4. update the drivers to the latest Version.
  
  5 install the latest drivers from the HP website brodcomm or even other Web sites.
  
  No the above to help me out.
  
  3) all wired network work great, but when I swtich to wifi, it will automatically limited and then diirectly hang the entire notebook.
  
  Please please suggest the Suggestion and the ways out sorting valueable.
  
  He's really frustrated now, I do not understand what are the ways to my wifi on working condition.
  
  Thank you
  
  Kind regards

  Spoiler (Highlight to read)

  Spoiler (Highlight to read)

  Spoiler (Highlight to read)

  Spoiler (Highlight to read)

  Aditya Rai

  Aditya Rai

  Hello @adityarai82,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I read your post about the WiFi problem and wanted to help you!  I understand that you have tried the troubleshooting steps a lot already, without success.

  Try to review these steps, offered by community member @Great-Christine-Tree:

  First of all, we have a step by step guide to guide you through the process of diagnosis here:
  Troubleshooting your wireless network and Internet access

  A second option is to try the following steps:
  Powercycle the network:
  1. turn off your laptop.
  2. unplug the power to your router.
  3. disconnect the power to your modem.
  4. wait at least 45 seconds.
  5 reconnect the modem and wait for it to come back online.
  6 plug in the router and wait for it to come back online.
  7. turn on your laptop and test your connection.
  
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.
  
  Reset the TCP/IP settings on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.
  
  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.
  
  Reinstall the NIC drivers:
  1. download the drivers from here , but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.
  
  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.
  
  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.
  
  If these steps do not resolve the problem, try this document published by Microsoft for network management issues: wired and wireless network problems. You can change the operating system with the drop-down list in the upper right of the document.

  Source: fixes Common for wireless connectivity problems.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Satellite Z830 - drop out Wireless adapter / conflict with USB

  My Z830 Satellite has a weird problem. Wireless connectivity works well until I have plug in a usb key into the usb port 3 on the side. The wireless, then falls after a period and then it does not find the available wireless connections. It effectively kills the wireless adapter, or at least makes it less reliable.

  You must restart to recover the connection. I tried with several different usb storage devices with the same result. Both wireless and usb drive work fine, but not at the same time. This occurs regardless if the use of the battery or when it is plugged. I checked the power settings to ensure there wasn't a problem there. Everything is right on install/factory in general settings, so I can't imagine that's all what I changed.

  I'm at work, but I'll see if I have the same problem with the usb at the back, or a disk takes hard usb powered, when I get home. It's really annoying, because you cannot use the net and let in a usb disk without risking a fall on the. I haven't checked messing around with settings of USB root hub or from IRC, as it seems unlikely. Any thoughts or is a matter of "give it back to Toshiba" - I'd rather not have the downtime. It took me a while to work on this has been the problem.

  The wireless connection is very strong when the ultrabook is used, so is not a question of signal strength.

  Hello

  To be honest, I've ever read on similar issues.
  Did you check if the problem occurs with other ports USB or does it use a special port of Z830 Satellite?

  In your case I recommend also using HARD drive recovery option and to set the system back to factory settings to make sure that there is no software related issue.

• Wireless adapter for Thinkpad R61I

  Hello

  I have a laptop Lenovo Thinkpad R 61i bought in India.

  I wanted to know if I can install a wireless to this machine to use adapter.

  If the answer is Yes, then please suggest me that make recommendations and the model of the wireless adapter for buy.

  Any help would be appreciated.

  Hey guys,.

  Well, finally it seemed to have sorted the issue myself. After both to investigate and navigate the lenovo site, I decided to tear down the laptop.

  I mean remove the foot screws and check what the question was... I locate the Wifi adapter that came with the machine and took note of the brand and the model.

  After that the hunt for the pilot Bernard who took hours but finally a 246 MB file was found on the lenovo site and after installing BOOM I my work wireless as never before.

  However I place an order online for an internal wireless adapter that encrypted on INR 1662, a waste that I'm trying to cancel.

  in any case its all fixed now and the need to go wireless... Well done to everyone who helped with this problem.

  Good bye...

  The India Anil

• wireless adapter keeps blocking down is my grilled adapter windows guard resetting, but it always stops

  My keepps wireless adapter window line to hit me back it but after a few minutes I connection loose again what is happening

  Hello

  ·         What operating system is installed on your computer?

  ·         You did changes to the computer before the show?

  Method 1:

  I suggest that you put the computer to boot and check for the issue:

  http://support.Microsoft.com/kb/929135

  Note: Place the computer back to normal when you have completed troubleshooting by following step 7 from the link above.

  Method 2:

  I also suggest you to remove the security of the wireless network and check for the issue:

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Note: Make sure to put the protection of the security on the wireless network when you are finished troubleshooting.

  See also: http://windows.microsoft.com/en-US/windows-vista/What-are-the-different-wireless-network-security-methods

• Wireless adapter is no longer detected?

  Well, my girlfriend has dropped my really heavy DVD player on my USB wireless adapter, which was plugged in advance... adapter came out well, but the ports... not so much. So we had to move to the rear ports. We could always connect to the internet, no problem. Then the problems started. We would connect to a maximum of 10 minutes to an hour while that between the duty to repair our wireless connection. Then he stopped to pick up our networks. Now the wireless itself has disappeared.
  The card is not detected any longer, but it works fine connected to another PC. I tried reinstalling the drivers, nothing works. I tried EVERYTHING nothing helped. Someone, anyone please help me solve this problem!

  It is more of a hardware issue of a Windows problem.  The USB connector could have been damaged such that the power PIN is shorted on a spit of land somewhere.  Try to open the housing of your computer and follow the cables to the back of your damaged USB connector where it plugs into the motherboard and disconnect the connector from the motherboard.  With luck, that could take care of it.

  HTH,
  JW

• WIRELESS ADAPTER WILL NOT WORK UNLESS THE WIRED CONNECTION IS PRESENT

  PROBLEM: RECENTLY SPEND YOUR DESKTOP OF WIN - XP TO WIN 7 32 BIT AND MY HP LAP TOP VISTA 32, WINDOWS 7, 64 BIT.

  WIRELESS LAPTOP ADAPTER, NOT REARRANGE ITSELF TO USE A WIRELESS NETWORK

  CONNECTION. THE ROUTER AND WIRELESS ADAPTER HAVE THE CORRECT INFORMATION CONFIGURATION AND WORK WELL USING THE WIRED NETWORK. WHEN I MOVE THE NIC WIRELESS WI - FI FAILS.

  INFO WIRELESS ROUTER:

  LINKSYS BRAND: WRT300N V1.1
  BASIC WIRELESS SETTINGS: NETWORK RADIO BAND = AUTO, CHANNEL = MIXED MODE = AUTO, SSID = ACTIVE.
  WIRELESS SECURITY = WPA PERSONAL WITH TKIP ENCRYPTION

  WIRELESS ADAPTER, INTEL (R) WIRELESS WIFI LINK 4965AGN

  HP Pavilion DV 9700, WIN 7 64 bit update for Win Vista 32, NVidia Ge Force 8600 m GS graphic card, Win 7 64 bit.

  WHEN I CLICK ON THE ICON TO ACCESS INTERNET AND CLICK ON THE NETWORK TO CONNECT, THE WINDOWS NETWORK DIAGNOSTIC DIALOGUE BOX SHOWS CONNECTED, BUT FAILS TO COMPLETELY MAKE THE CONNECTION. WATCH THEN RESOLVE THE PROBLEMS, WHICH FAILS AND FINALLY TO INVESTIGATE THE PROBLEMS OF ROUTER OR ACCESS POINT...

  OTHER PEOPLE HAVE THIS PROBLEM, WHEN THEY SWITCH TO WIN 7. BUT THERE WAS NO MIRACLE DOCUMENTED THAT I CAN FIND ON THE WEB. IN THE OTHER FORUMS DISCUSS ISSUES RELATED TO THIS PROBLEM CONGREGATE, THEY PROVIDE NO BUGS. I NEED HELP TO SET UP MY WIRELESS NETWORK ADAPTER TO THE RECONFIGURATION OF THE WIRELESS NETWORK.

  Thank you all who responded and have tried to help me. Before posting, I tried most of the mentioned patches, including upgrading my firmware of the router. In addition, I went to Device Manager and scanned for changes and checked the properties under the Advanced tab of the Wifi link adapter. I tried the update driver and deactivation and activation of the device. None of this has worked.

  Finally, I uninstalled and then reinstalled the Wifi card. It worked. I guess the driver software became corrupt and data of the register of the device had probably need re - install, this is what worked. This seems to happen when upgrading Windows operating systems prior to WIN 7 and later people lose their wifi connection. Then this problem develops.

  It worked for me. I hope this works for others with the same problem.

  Once again I thank you all.

• Error problem USB wireless adapter "Wireless LAN adapt Wireless Network Connection 4:

  Hello

  I can't access the internet via a USB on my desktop PC wireless adapter. In fact, I received the following message:
  Wireless Network Connection 4 Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Double Belkin N + Wireless USB adapt
  Physical address.... : E8-5B-5B-49-DD-CD
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Please help me solve the problem.

  tanks

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  I would like to ask you some questions, in order to better understand the issue.

  1. What is the exact model of the Belkin USB adapter?

  2. What is the brand and model of your computer?

  3. When was the last time it was working fine?

  4. Remember to proceed with software or hardware changes recently?

  This problem may occur if there is a conflict with a third-party software or due to an outdated driver, to diagnose this issue further and solve the problem, try the following methods.

  Method 1: Run the network troubleshooter

  I suggest you to run the network troubleshooter utility. It will automatically detect and solve the common problems that can cause problems with the network. To run this utility, you can follow the article below:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2: Network Wi - Fi problems and

  Follow the Microsoft article on wireless and wired network problems. Click on the link below:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information was useful. Do not respond with answers, because it will help us to find and provide you with a better resolution.

  Thank you

• Wireless adapter fails - then the computer crashes.

  I've had this problem for a few days now. Basically, the problem is that my computer freezes completely and it becomes unresponsive at random times. It happened while I watch videos, play games or surf the internet, even while I'm on the login screen.

  I have recently noticed that just before the accident, strange things happen that seem to be centered around the wireless adapter. I'm not going to load a Web page, so I'll check the icon wireless and see that I'm connected to the network, but not internet. And then, as I try to disable and re-enable the adapter, the computer will crash.

  I just downloaded the drivers from the adapter and install them, but that has not changed anything.

  Anyone know what could cause this weird problem?

  Thank you.

  PS:

  Just happened twice again. Failed loading of Web pages, and who warned me that something was up. I unplugged the adapter, the operation aboard as usual for a while, but the computer does not save the adapter has been unplugged and continued to try to load web pages for a few moments, before it crashes.

  The first time, he had a BSOD, but he flashed to the top for a while before the computer restarted itself.

  Adapter is TL-WN722N

  Hello

  Thanks for posting the query on the Microsoft Community Forums. You have reached the right place. Let us work together to find the cause of this problem and try to solve.
  
  There could be various reasons for gel as a third-party program, modules, the origin of the problem of the computer.

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

  Note: 1) the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  (2) If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Windows 7 wireless adapter missing

  Hello

  I have a DELL Inspiron 14R with windows 7 installed top.

  Yesterday, Wifi worked very well, and today, it is not. Wireless adapter is not listed in the change of parameters of the card or even the Device Manager... However, the ethernet connection works fine.

  I tried to reload using the last configuration and nothing has changed.

  Any idea on what the problem might be, and a solution would be more than welcome :)

  Thank you.

  Hello Fredric,

  Welcome to the Microsoft Community Forum.

  1. This is the first time that you connect to a Wi - Fi connection?
  2. You get the error message? If Yes, what is the exact error message/code?
  3. You did it hardware or software change before the specific issue?

  I would suggest trying the following methods and check.

  Method 1: why I can't connect to the Internet? to:

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7

  Method 2: Install the latest drivers for the network card

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows/fix-network-adapter-problems#1TC=Windows-7

  For problems with missing wireless adapter, update the drivers for the wireless adapter and check if you are able to access the Internet

  Method 3: Update a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-in/Windows/Update-driver-hardware-isn ' t-work correctly

  Please return with the result and also answers to the above questions, we will be happy to help you further.

  All the best!