Wireless adapter was released as Unspecified

I have a windows computer with me 7. I hva e no router close is in the living room. The computer is in my room which is one level below. So I bought a wireless apter and when I put it in my computer usb as 'No' instead of connect. Can you help me please?

Original title: Windows 7

Hello

Please contact Microsoft Community.

I understand this must be frustrating, but don't worry, we're here to help and guide you in the right direction.

Method 1

Unplug all external devices outside keyboard and mouse and check the status of the issue. Test the device on another computer and see if you experience the same problem.

Method 2

Run the hardware troubleshooter and check the status of the issue.

http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

Method 3

Uninstall and reinstall all USB controllers

To remove and reinstall all USB controllers, follow these steps:

(a) click Start, type sysdm.cpl in the start search box and press enter.

(b) click on the hardware tab.

(c) click the Device Manager button.

(d) expand Bus USB controllers.

(e) right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

(f) restart the computer and then USB controllers will install automatically.

Try to place the USB again and check.

I hope this helps.

Tags: Windows

Similar Questions

  • Inspiron n4010 virtual wireless adapter shows 'unplugged', does not connect

    I've scoured the web looking for a solution to this problem, found a similar question posted here, but no solution... en.Community.Dell.com/.../20263886

    My friend brought me his Inspiron n4010 notebook help saying until a few months ago, he used to connect to the wifi with no problems. All of a sudden, it wouldn't show all wireless networks available no matter where she went - its wireless home network, work network and neighborhood of free wifi hotspots - none would connect. Similarly, I have tried with my home wireless network and my network wireless office without result. Connect LAN2 (for Boradcom virtual Wireless Adapter) this always as 'unplugged network Cable.

    **********************************
    INFORMATION SYSTEM
    **********************************
    Reference Dell system detects shows the system as:

    Inspiron 14R (N4010, early 2010)
    Serial number: * Let me know if you need this info)
    Express service code: * Let me know if you need this info)

    Here are the specs of the system via system information:
    Host name: LAURA-PC
    Name of the operating system: Microsoft Windows 7 Home Premium
    OS version: 6.1.7601 Service Pack 1 Build 7601
    OS manufacturer: Microsoft Corporation
    OS configuration: Standalone Workstation
    OS Build type: multiprocessor Free
    Registered owner: *.
    Registered organization: Microsoft
    Product ID: *.
    Original installation date: 09/09/2010, 19:22:06
    Starting system: 02/02/2015, 12:13:39
    System manufacturer: Dell Inc..
    System model: Inspiron N4010
    Type of system: PC x 64
    Processor (s): 1 processor installed.
    [01]: Intel64 family 6 model 37 Stepping 2 GenuineInt
    El ~ 1065 Mhz
    BIOS version: Dell Inc. A02, 21/04/2010
    Windows directory: C:\Windows
    System directory: C:\Windows\system32
    Starting device: \Device\HarddiskVolume2
    Local system: en - us; English (United States)
    Input locale: en - us; English (United States)
    Time zone: (UTC-08:00) Pacific (U.S. & Canada)
    Total physical memory: 3 893 MB
    Available physical memory: 2 376 MB
    Virtual memory: Max size: MB 7 783
    Virtual memory: available: 4 938 MB
    Virtual memory: in use: 2 845 MB
    Office (s) swap file: C:\pagefile.sys
    Domain: workgroup
    Logon server: \\LAURA-PC
    Corrections: 268 fixes installed.
    [01]: KB2849697
    [02]: KB2849696
    [03]: KB2841134
    [04]: KB2670838
    [05]: KB971033
    [06]: KB2305420
    [07]: KB2393802
    [08]: KB2425227
    [09]: KB2475792
    [10]: KB2476490
    [11]: KB2479628
    [12]: KB2479943
    [13]: KB2484033
    [14]: KB2485376
    [15]: KB2487426
    [16]: KB2488113
    [17]: KB2491683
    [18]: KB2492386
    [19]: KB2497640
    [20]: KB2503658
    [21]: KB2503665
    [22]: KB2505438
    [23]: KB2506014
    [24]: KB2506212
    [25]: KB2506223
    [26]: KB2506928
    [27]: KB2507618
    [28]: KB2507938
    [29]: KB2508272
    [30]: KB2508429
    [31]: KB2509553
    [32]: KB2510531
    [33]: KB2511250
    [34]: KB2511455
    [35]: KB2515325
    [36]: KB2522422
    [37]: KB2524375
    [38]: KB2525694
    [39]: KB2529073
    [40]: KB2530548
    [41]: KB2532531
    [42]: KB2533552
    [43]: KB2533623
    [44]: KB2534366
    [45]: KB2536275
    [46]: KB2536276
    [47]: KB2541014
    [48]: KB2544893
    [49]: KB2545698
    [50]: KB2547666
    [51]: KB2552343
    [52]: KB2555917
    [53]: KB2556532
    [54]: KB2559049
    [55]: KB2560656
    [56]: KB2562937
    [57]: KB2563227
    [58]: KB2563894
    [59]: KB2564958
    [60]: KB2567053
    [61]: KB2567680
    [62]: KB2570791
    [63]: KB2570947
    [64]: KB2579686
    [65]: KB2584146
    [66]: KB2585542
    [67]: KB2586448
    [68]: KB2588516
    [69]: KB2603229
    [70]: KB2604115
    [71]: KB2607712
    [72]: KB2616676
    [73]: KB2617657
    [74]: KB2618444
    [75]: KB2618451
    [76]: KB2619339
    [77]: KB2620704
    [78]: KB2620712
    [79]: KB2621440
    [80]: KB2631813
    [81]: KB2633952
    [82]: KB2639308
    [83]: KB2639417
    [84]: KB2640148
    [85]: KB2641653
    [86]: KB2641690
    [87]: KB2644615
    [88]: KB2645640
    [89]: KB2647516
    [90]: KB2647518
    [91]: KB2647753
    [92]: KB2653956
    [93]: KB2654428
    [94]: KB2655992
    [95]: KB2656356
    [96]: KB2656411
    [97]: KB2658846
    [98]: KB2659262
    [99]: KB2660075
    [100]: KB2660465
    [101]: KB2660649
    [102]: KB2661254
    [103]: KB2665364
    [104]: KB2667402
    [105]: KB2676562
    [106]: KB2677070
    [107]: KB2679255
    [108]: KB2685811
    [109]: KB2685813
    [110]: KB2685939
    [111]: KB2688338
    [112]: KB2690533
    [113]: KB2691442
    [114]: KB2695962
    [115]: KB2698365
    [116]: KB2699779
    [117]: KB2705219
    [118]: KB2709162
    [119]: KB2709630
    [120]: KB2709715
    [121]: KB2712808
    [122]: KB2718523
    [123]: KB2718704
    [124]: KB2719857
    [125]: KB2719985
    [126]: KB2724197
    [127]: KB2726535
    [128]: KB2727528
    [129]: KB2729094
    [130]: KB2729452
    [131]: KB2731771
    [132]: KB2731847
    [133]: KB2732059
    [134]: KB2732487
    [135]: KB2732500
    [136]: KB2736233
    [137]: KB2736422
    [138]: KB2739159
    [139]: KB2741355
    [140]: KB2742599
    [141]: KB2743555
    [142]: KB2749655
    [143]: KB2750841
    [144]: KB2753842
    [145]: KB2756822
    [146]: KB2756921
    [147]: KB2757638
    [148]: KB2758857
    [149]: KB2761217
    [150]: KB2761226
    [151]: KB2762895
    [152]: KB2763523
    [153]: KB2769369
    [154]: KB2770660
    [155]: KB2773072
    [156]: KB2778344
    [157]: KB2778930
    [158]: KB2779030
    [159]: KB2779562
    [160]: KB2785220
    [161]: KB2786081
    [162]: KB2786400
    [163]: KB2789645
    [164]: KB2790113
    [165]: KB2790655
    [166]: KB2791765
    [167]: KB2798162
    [168]: KB2799494
    [169]: KB2799926
    [170]: KB2800095
    [171]: KB2803821
    [172]: KB2804579
    [173]: KB2807986
    [174]: KB2808679
    [175]: KB2808735
    [176]: KB2813170
    [177]: KB2813347
    [178]: KB2813430
    [179]: KB2813956
    [180]: KB2820197
    [181]: KB2820331
    [182]: KB2829361
    [183]: KB2830290
    [184]: KB2832414
    [185]: KB2833946
    [186]: KB2834140
    [187]: KB2834886
    [188]: KB2835361
    [189]: KB2835364
    [190]: KB2836502
    [191]: KB2836943
    [192]: KB2839894
    [193]: KB2840149
    [194]: KB2840631
    [195]: KB2843630
    [196]: KB2844286
    [197]: KB2845187
    [198]: KB2845690
    [199]: KB2846960
    [200]: KB2847077
    [201]: KB2847311
    [202]: KB2847927
    [203]: KB2849470
    [204]: KB2850851
    [205]: KB2852386
    [206]: KB2853952
    [207]: KB2859537
    [208]: KB2861191
    [209]: KB2861698
    [210]: KB2861855
    [211]: KB2862152
    [212]: KB2862330
    [213]: KB2862335
    [214]: KB2862966
    [215]: KB2862973
    [216]: KB2863058
    [217]: KB2863240
    [218]: KB2864058
    [219]: KB2864202
    [220]: KB2868038
    [221]: KB2868116
    [222]: KB2868623
    [223]: KB2868626
    [224]: KB2868725
    [225]: KB2872339
    [226]: KB2875783
    [227]: KB2876284
    [228]: KB2876315
    [229]: KB2876331
    [230]: KB2882822
    [231]: KB2883150
    [232]: KB2884256
    [233]: KB2887069
    [234]: KB2888049
    [235]: KB2891804
    [236]: KB2892074
    [237]: KB2893294
    [238]: KB2893519
    [239]: KB2893984
    [240]: KB2898785
    [241]: KB2898857
    [242]: KB2900986
    [243]: KB2901112
    [244]: KB2904266
    [245]: KB2908783
    [246]
    Network adapters: 3 interconnect installed.
    [01]: Atheros AR8152 PCI - E Fast Ethernet Controller
    Name of the connection: connection to the Local network
    DHCP enabled: Yes
    DHCP server: 192.168.1.254
    IP addresses
    [01]: 192.168.1.167
    [02]: b 87:4 d 76 fe80::b535:b8ea:8
    [03]: 2602:304:5692:7719:741's: b075:fb08:ce0
    [04]: b 87:4 d 76 2602:304:5692:7719:b535:b8ea:8
    [02]: device Bluetooth (personal area network)
    Name of the connection: Bluetooth network connection
    Status: Media disconnected
    [03]: Virtual Broadcom wireless adapter
    Connection name: Local 2 network connection
    Status: Media disconnected

    ***************************************************************
    TROUBLESHOOTING STEPS TAKEN UP TO NOW:
    ***************************************************************

    1. check that the wireless is enabled via the F2 key - it's (but turn it off seems to have no effect).

    2. check that the wireless is enabled in the BIOS - I. BIOS version is A02, I have not tried so far. I prefer to do it as a last resort, unless that specific need.

    BIOS: Wireless: enabled
    Wireless (Switch) / (Hotkey): all the
    Internal Bluetooth: enabled
    Internal WLAN: enabled
    Internal WWAN: enabled

    3. the Device Manager shows wireless network devices as missing from all the drivers? N °
    Device Manager showed the following details: virtual map of Broadcom, provider wireless: Broadcom, driver Date: 01-21-2010, driver Version: 5.60.48 - 35, digital signer: MS Windows HW Compatible Publisher

    4 are the network updated wireless drivers? With the help of Dell system detects, automatic detection of the system, he showed a driver update available listed as "Dell Wireless WLAN 1501 half Mini-Card (4313bgn) Driver. When running Setup, it gave an error "no compatible hardware found...". »

    5. I ran ipconfig/all. Here is the read:

    Microsoft Windows [Version 6.1.7601]
    Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

    C:\users\administrator>ipconfig/all

    Windows IP configuration

    Host Name . . . . . . . . . . . . : **********
    Primary Dns suffix...:
    Node... type: hybrid
    Active... IP routing: No.
    Active... proxy WINS: No.

    Ethernet connection to the network space 2 card:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Broadcom virtual wireless adapter
    Physical address.... : 02-50-F2-00-00-01
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes

    Bluetooth network connection Ethernet card:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Device Bluetooth (personal area network)
    Physical address.... : C4-46-19-EF-96-56
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes

    Ethernet connection to the Local network card:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Atheros AR8152 PCI - E Fast Ethernet Controller
    Physical address.... : B8-AC-6F-70-2F-4B
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes

    Card tunnel Local Area Connection * 12:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Teredo Tunneling Pseudo-Interface
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    Card tunnel Local Area Connection * 14:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Microsoft 6to4 card
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    Tunnel adapter isatap. {C00AD485-0CED-4EF9-B632-033E9AFD14E9}:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Microsoft ISATAP adapter
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    Tunnel adapter isatap. {CD91392E-769E-4E32-A5C2-2680FF4BBC41}:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Adapter Microsoft ISATAP #4
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    Tunnel adapter isatap. {FC8C4544-C5EC-479D-AA95-B545EBDCD8C1}:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Adapter Microsoft ISATAP #6
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    C:\users\administrator >

    6. I checked the Windows Mobility Center. Wireless 'tile' was where it should have, according to other messages I saw who were on this subject. Strangely, when I clicked on the button to launch under Dell - Radio control options, checkboxes Wi - Fi and Mobile Broadband have been unchecked and greyed out.

    7. I have reset the winsock catalog and restarted the computer via the elevated command prompt (Administrator)
    NET winsock reset catalog
    No change in status wireless.

    8. I disabled the Norton firewall and Windows and anti-virus to see if wireless was somehow blocked by them. No change in status wireless.

    9. I checked the Windows power plan settings to confirm that network cards did not have their power reduced. I put the adapter wireless for maximum while on battery and current performance alternative.

    10. I checked the Windows Event Viewer logs > Windows Logs > system:

    I've seen repeated Scriptures error spread among the many dates of "BTHUSB (Blue Tooth adapter failed in an indeterminate way, will not be used.". The driver has been unloaded. "I saw no reference to what about wireless however.

    11. I tried to run Windows Update manually to see what, if any, driver updates it can find (using a network cable connection) and got the error 'cannot be updated because the Windows Update service is not started. I confirmed that he was released. I also manually stopped and restarted the service but continued to get the same error message. I kept the Windows Firewall and Norton Firewall (and antivirus) disabled in case they were interfereing with Windows Update, but no luck.

    12. I ran bad/ad/spyware scans with a portable version of Spybot and also a free version of SuperAntiSpyware, analyze the results showed several adware results, that have been deleted.

    13. I tried to manually configure the IP address, subnet mask and entered default gateway for IPv4 to the wireless adapter, which had been put on "obtain automatically", as it should. I also put the server DNS preferred my ISP (Comcast), then tried Google 8.8.8.8. This should have worked but the connection still showed as "cable disconnected" (why is a mistake to launch a "cable disconnected" wireless connection?)

    14. just for fun, I ran the update from the Intel driver from their site (via wired), who identified the available for graphics and Chipset updates - I've updated both, but it did not help (no surprise).

    15. I started Windows in Safe Mode with network - just as in normal mode, he showed the connection wireless as "cable disconnected".

    I am open to any suggestions at this point. The laptop is out of warranty so prefer to avoid paid support, if in any way possible.

    If you can get a hardware ID by activating / deactivating it on or turned off, it suggests itself wireless card is bad... Diagnostic tests could confirm this:

    http://dellwindowsreinstallationguide.com/F12-Preboot-Diagnostics/

    You can look in the service manual to try and reinsert the card or replace it. His work a bit longer than necessary:

    http://FTP.Dell.com/manuals/all-products/esuprt_laptop/esuprt_inspiron_laptop/Inspiron-14r_service%20manual_en-us.PDF

    An easier solution if you are uncomfortable with the material of the Assembly would be to buy a USB wireless adapter.

  • Toshiba stor. Connection wireless adapter E smartphone problem

    Hello world.
    I have a shop. E wireless adapter I can not connect with some devices. When I use my laptop, it works perfectly. I also tried with a s4 Galaxy and a Note 2, both work.

    My Samsung Galaxy 4 marks used to connect to this subject when I was on 4.4 kitkat firmware, I could access my hard drive without any problem. But since I upgraded 5.0.1 is not connected to its network Wi - Fi. I updated the adapter android app wirelessly on game store that shows an improvement on the lollipop. Network adapter is displayed on my rating 4 but when I type the password it does not connect. When I remove the password protection, it connects to the WiFi but I can not access my files.
    I also have the problem of connection with my sister's computer, it shows the Wi - Fi, but can't type the password.
    Does anyone know how to fix this?

    Thank you so much everyone.

    Hello.

    I would like to add that my sister's laptop is on windows 8.1, that would cause it not to connect?

    Thank you

  • RALink RT5390 wireless adapter does not work

    My g6 pavilion laptop wifi adapter was not properly work recently. my internet router and networking are works well as it should, but whenever I restart my laptop, repeat me that there is no link and no other wifi networks when there are clearly other networks because of my neighbors.

    I tried a system restore to solve the problem, but it has no effect and my norton affects the restoration of the system to disable the antivirus.

    I'm stuck on ideas to solve this problem and I don't know much about networking and internet stuff, so I'm pretty powerless here

    Here is a link to my features of laptops if necessary:

    http://support.HP.com/us-en/document/c03136241

    These ralink adapters are simple ol ' sh * t. I don't know if it will be a complete solution for you, but I was pulling with my network card for months and this has proved to be the most effective for my computer. I have a HP Envy luck to be equipped with a Ralink RT3290, Windows 8.

    so...

    Out of the box, my computer was working fine and it connected to the network OK. As soon as I moved further away from the router, I known constant dropouts, and the connection always folds between the low signal strength, to completely disconnect the router, where I had to re - connect manually there. This question really frustrating. I use my computer on the top level of my house, and the router is in the basement. If I was getting sick of this fast. Update driver after update driver, no luck. After trying everything under the Sun, I decided I would bite the bullet and I tried something a little bit Orthodox...

    I just uninstalled the driver for my computer. Yes, really. When a component on your computer a driver is stripped, Windows software has a few drivers that will install by default for your material so that it can remain functional on your computer. So, once remove the driver ralink on my computer, windows installed sound driver by default for my network card and... Voila! My connection problems are virtually non-existent at this point. The material is not always the best, but at least I can surf the net in my room without my connection affected by constant stalling.

    Now, other that the light on the button stuck wireless with an orange glow and list my NIC as #10 Device Manager, I always use this driver with minimum questions. Occasionally, he'll forget the connection once I wake the laptop from sleep, but this issue has been much worse with the ralink drivers than without.

    If you are aware of the risk (what is low, to be realistic, this can always be undone and you can always reinstall drivers ralink so that deosn proved to be an effective solution), I will explain in detail how I managed to do.

    (1) open Device Manager (right click the lower left corner in windows 8 and a shortcut appears in the drop-down below)

    (2) find network adapters and display its contents

    (3) make a right click on your wireless network adapter (should be something similar to "Ralink RT5390 802.11b/g/n... ") and click on"Uninstall"in the menu drop-down

    (4) a popup should appear and you should be given the possibility to uninstall or cancel it. Make sure you check "suppression software driver for this device" until you go forward, or Windows re - install the ralink driver.

    -Search for new hardware if your network card is not detected after you have uninstalled it. Your card should appear as "802.11n Wireless LAN card"

    -If you have an installer driver ralink that is newer or equal to the driver that is already installed, you can run the Setup program to remove any driver software remains which is usually overlooked by the device during the uninstallation Manager there from your computer

    -As an option, you can check potential driver leftover files C:\Windows\System32\Drivers. It is important to search for remains that Device Manager / ralink Installer may have missed because it can potentially conflict with the replacement of windows WLAN driver. pilots should have a short name for your adapter (e.g. rt3298.sys); they shouldn't be hard to find. Be careful as well; IT IS WISE TO ALWAYS SAVE no matter WHAT DRIVER SOFTWARE, YOU CAN REMOVE in CASE YOU MAKE a MISTAKE.

    (5) re - enter your information network and you should be good to go!

    I hope that it is of no help to you. People who know nothing about what they will tell you to install the latest driver and yatta yatta yatta this way, because it does not work I had to take the liberty to try to find a solution for these adapters cursed myself. I hope this helps a bit your question!

  • Cannot install Wireless Adapter (card NETWORK or USB key) to the Pavilion p6340a Win 7 Home Prem

    I removed a work card TP-Link to a Pavilion a1300a XP Home PC network to put in my Pavilion p6340a Win 7 (64-bit) Home Prem PC.

    Download and install the current drivers of TP-Link.
    Installed everything well and the adapter can be seen in sub "Change adapter settings" in network and sharing Center and shows as working properly in Device Manager, but it is not recognized as a network within the network and sharing Center.

    Under "Manage wireless networks'" nothing appears, if I then click on Add"then manually create network profile" "I then get an informative message '" an unexpected error occurred'. "

    Suspect a problem with the NETWORK card, I uninstalled it and its drivers and tried to install a USB wireless adapter with the same exact result and the error message. It seems that there must be an OS problem or something stopping the wireless to work. USB adapter both NIC work properly when installed on the former Pavilion a1300a XP Home PC. NETWORK card and USB adapter are the current drivers for Win7.

    All the ideas it driving me crazy. A simple 5 minutes on any other PC task turned into many.many hours without solution.

    After many hours of uninstall re install & try everything under the Sun in many forums, I finally found a solution. Despite trying with firewall disabled at different times was the final fix

    1. Uninstall NETWORK card and USB drivers and devices.
    2. Then uninstall the AntiVirus (in this case AVG Internet Security)
    3. Reinstall the NETWORK card and drivers
    4. Reinstall AntiVirus

    Tried the USB adapter as well so that the antivirus has been uninstalled and installed no. with problems.

    Everything works very well.

  • Toshiba 32RL933 - what wireless adapter I can use?

    Hello

    I have a macbook pro (latest version) which has intel WiDi and my tv has intel WIDI also remind that I could use the one I have in my house, but as I understand it, it is that I need a wireless adapter.

    I have one here at home, but it didn't work. (d-link dwa-140)
    I was wondering if it was my mistake, or if this adapter in question does not work on my TV.

    I would also like to know if the only one that works is the toshiba adapter or y at - it one adapter other than the toshiba that works.

    Thank you

    flaviotobi, after having read pages 13, 48 and specification of the pages (81), the manual of your model TV, (32RL933), the manual of English to me, at least, indicates that only the Toshiba dual-band wifi adapter is suitable for wireless networks and functions of WiDi.

    In my opinion, the use of the available USB only is a concern, this does not allow the use of the function of time-shift TV, because this feature requires the use of a flash or connected USB HARD disk drive.
    It is my opinion that the time shift function is more convenient than having the WiDi or wireless network card and find the cable system without problem, in my case.

    If I want to display anything from my laptop on the TV, I use HDMI, (via a HDMI auto-box switch), because I have multiple devices share available on my 32RL900A sockets and having only a USB taken is a little embarrassing, but as I have said in other forums, we buy what we can afford...

    donhe7

  • P3K49EA: How do you know which wireless adapter you have?

    Hey,.

    I was looking at the Wi - Fi drivers for this specific unit but for many other portable, I can find the drivers for the network for a series of adapters Wi - Fi, like Intel, Realtek, and Qualcomm.

    Many times, a way to solve the problem of falling of the internet is now by installing the last Intel Wi - Fi and Bluetooth card, but there are other drivers for the cards made by other manufacturers, how do I know for sure that my device has a processor intel Wi Fi adapter?

    I don't know that, in some cases, you can check back and see exactly which wireless adapter you have, but who are these dependent region?

    For example. each laptop, Pavilion, envy and water courses that are sold to the United Kingdom, all have an Intel wireless adapter? and if it was a laptop computer with an AMD processor and chipset?

    Really looking forward to hearing from you guys.

    Thank you

    Steven

    I suspect that you have installed the Realtek wired ethernet driver and Intel wifi driver. Only the driver for the hardware you have installed. In fact, the tag on the laptop won't tell you much. If you look to the top of the support page for your specific model, it will show the drivers for all the optional features available in this series of models. And Yes, the wireless cards can be region-specific. The regulation on radio communication varies around the world. That's why several wireless drivers are listed, some of which you can't use. Unless you are having problems just use office supplies Windows driver. If there is a problem, it may be necessary to know your specific hardware so that you can find a more specific driver from the manufacturer's Web site, or you can search the Internet for other people having a problem with this specific device and use other suggest drivers. I hope that this is a logic.

  • The upgrade to 2.0 for a wireless adapter USB Port work

    Hi, I just bought a USB network adapter wireless, I was able to configure my laptop but when I plugged in my USB Port, I got a message that he needs one more USB 2.0 Port and I must improve my USB port to make it work properly, how can I upgrade my USB port at the top level? Thank you and hope you can help me with my problems... Alice

    Hello

    As Flo don't say, no chance to upgrade the USB ports.

  • Slow WiFi on Qualcomm Atheros AR9485 wireless adapter on HP Pavilion 500-120EA 8.1 Windows

    This wireless adapter is extremely slow that causes ping high during the game. The game I tried was League of legends. The artheros adapter showed the ping MS 1000 +.

    So I decided to see if the necessary driver updated. When you go to Device Manager to update, it showed that she needed no updates.  Also checked on the hp site and it showed that I have the latest version of the driver. So I checked the Atheros website and I didn't have the latest version of the driver. So I intalled the latest driver at 10.0.0.263 10.0.0.270.

    Yet once I tried the game to see if there is an improvement with Internet and again he showed my ping 1000 + Ms. has not changed at all. No improvement.

    I did troubleshoot and it sort of something I do not know what but. No change.

    I also changed the powersaver maximum for the wireless card. No change.

    Several times I looked at task manager network, it shows send and receive to be at 16/08/32 Kbps or sometimes even zero Kbps. The table looks very small and its value on the chart was of 100 Kbps.

    However, I don't see a difference during the videos to youtube or browsing the Internet. Here, the speed is very good. Even during the speedtest, speed showed a ping from 43ms. sending / receiving packets are indicated in 00' sKbps Mbps. The table is not stable it flucatuates strongly.

    So I change my card a blekin N300 wireless and all the problems I've had are solved. The ping playing League of legends is 40-70 m send it / receive packets similar to the atheros AR9485 rae but I've seen go up to 88 Kbps at its highest level.

    So what can I do to fix the Qualcomm Atheros AR9485 wireless adapter?

    Any help is appreciated.

    What can I do else?

    Just an update to someone else who has had this problem for the channel 11 wireless channel setting should do the trick.

  • Pavilion g6-1c39ca: wireless adapter disappeared

    MEDEL: HP Pavilion 1c39ca g6

    Hello.

    A days fea, I have format my hard drive.

    Before formatting, there is no problem with internet service. (Bote Wifi and cable internet worked well)

    After formetting, I installed Windows 7 and downloaded all the drivers from the HP site support.

    Except the drivers LAN and Bluetooth, other drivers were instralled, succeefully.

    In particular, when I was installing the Atheros Driver Installation program, I saw a pop-up message and it meant «802.11a/b/g/n Wireless Adapter Device Not Found.» "The device may not be present or could have been ejected / disconnected from the system.

    I can't make sense because I used wifi service a few hours before formatting my laptop computer and received a message that wifi device has been ejected/disconnected. I opened the cover and the keyboard and do not touch anything, physically.

    Can you show me a solution to this problem? or do I have to go to Bestbuy to solve this problem?

    Thank you

    Hello:

    According to the list of parts on the link below, your laptop comes with a PCIe adapter half minicards (HMC) WiFi Realtek 8188GN - 1 x 1 802.11b/g/n wireless card, which explains why the driver for Atheros wireless card does not work.

    http://PartSurfer.HP.com/search.aspx?SearchText=A3J85UA

    You need the driver for the network without WIRE Realtek 8188GN card...

    This package contains the installation package driver for the controller LAN Realtek RTL8188CE wireless in the notebook models and operating systems.

    File name: sp53753.exe

    If you see not all devices in Device Manager in need of drivers (if the needs of a pilot wireless card, it will appear as a network controller in Device Manager), you may need to install this software, restart the computer and use this software to re - turn on the wireless card.

    This package provides the HP connection for laptops Manager running a supported operating system.

    File name: sp53394.exe

    If none of the above wins the wireless working again, most likely the wireless card is dead on you and needs to be replaced.

    In addition, depending on the product specifications page below, your laptop does not come with built in bluetooth network.

    If so, this feature would have been listed as well as WLAN 802.11b/g/n wireless connectivity specifications.

    http://support.HP.com/us-en/product/HP-Pavilion-G6-1C00-notebook-PC-series/5145708/model/5173136/document/c03065064/

  • HP Envy M4 1115dx: Qualcomm QCA Atheros Driver Installation error | Device not found wireless adapter

    I just replaced my old HD with a new SSHD Seagate. Everything is going well until I tried to connect to internet in wifi wireless mode with. I think it was a pilot error because I just do a blank Windows 8 install on my new SSHD (hybrid drive SSD). So I went to find the Driver for the WLAN Module.

    HP is automatically detected my laptop model number and gave me a list of drivers. I selected "Qualcomm Atheros QCA90000 series Wireless LAN Driver for Microsoft Windows" under the list of Driver Network in the menu dropdown.

    In the middle of the installation of this driver, I was arrested and met a titled error message, "802.11a/b/g/n Wireless adapter device not found". Just below this title was a big red circle with a white X sign. Besides, he said: "the device may not be present or could have been ejected unplugged from the system. Abortieng the installation, please insert the card and try again the Setup program. »

    Below is a screenshot of what I mean.

    Problem solved. I uninstalled all the drivers but the Ralink. Think I know what may have caused this.

    The recommended for WLAN driver was based on a misinterpretation on behalf of HP. HP auto detected my laptop as a 1150la instead of the 1115dx model.

    I'm not sure why HP thinks that my model is another, but it may have something to do with the SSHD and thermal fan replacement I did before this error WiFi.

  • Satellite Pro L40 - wireless adapter does not work - Vista

    I recently had some problems with my laptop.
    A couple of weeks, I put in a disc of OpenSuse.
    It's not stable anything, but locked me out of my original Vista operating system.

    I reinstallled Vista Home Basic, but there are a few problems.
    Mainly, my wireless adapter does not work.

    When I flip the button to turn it on nothing happens and it is not recognized in Windows.
    I installed Atheros Driver, but still nothing happens, light is not yet.

    Any advice?

    Hello

    First check the device-> network adapters area manager
    You see the WLan card? Or the unknown device appears?

    If there is an unknown device, then the WLan driver has not been installed correctly or you tried to install a driver badly these two options are possible.

    Remember that your wireless network card? Maybe it was a Realtek WLan card?

    If it's a Realtek WLan card, try the WLan driver from the Realtek website and look for 802.11 g (RTL8187B) chip or you will simply check the page of the European driver Toshiba too the Realtek WLan driver also appeared on the Toshiba page

  • HP Pavilion 17 Laptop: Pavilion 17 - unstable, frozen at the start, missing a wireless adapter

    I bought this computer in June and a few months ago problem started.

    Problem 1: System suddenly stop and not the work of keyboard or mouse.

    Problem 2: When starting up, it freezes and need to hard reboot by pressing power botton

    Problem 3: more than half of computer time not connecting wireless and Device Manager shows that there is no wireless adapter

    [personal information deleted] and product number is J5R51AV

    To resolve this problem, I tried to update the window 7-10, which was not helpful.

    Also tried format for making adjustment that is not useful and interesting there still window 10 instead of 7.

    Any advice will really appreciate.

    You have a 1 year warranty which will expire soon. This sounds like a hardware problem that I would have solved as soon as possible. Fill out the form here to launch a support ticket:

    https://support.HP.com/us-en/contact-HP/product/HP-Pavilion-17-F000-notebook-PC-series/6936220/model/7174486

    Or call the HP technical support. >Contact HP

  • Lenovo z580 not recognizing wireless adapter

    Hello everyone

    I just brought a new Lenovo ideapad z580. It came with windows 8, which is unusable. So I did a clean install of windows 7 and keep trying to install the drivers.

    Windows refuses him acknowledge the existence of my wireless adapter. I opened the bottom to the top and I can see her, but he does not recognize. I installed the driver, and it does not recognize. I went into device management, and there was a small exclamation mark by "network controller" I don't know if this is the wireless adapter that it does not recognize. I went into bios and disabled WLAN and then restarted and reanbled it in bios and tried again all without success. I don't know what to do I am at a loss...

    Someone at - it ideas?

    The network controller is the wifi card. Try to install the drivers manually from the Device Manager.

  • HP 250 G3: BSOD - netr28x.sys (MediaTek 802.11 Wireless Adapter Driver, MediaTek Inc.)

    I recently bought the HP 250 G3 without OS laptop.

    I installed Win 7 pro 64 bit and all the missing drivers, which now seem to be up to date.
    I made my machine run all night to check synchronize files on dropbox and google reader, but this morning, I realized crashes BSOD occurred 9 times.

    So I download WhoCrashed which identified the main cause of the system down to be:

    netr28x.sys (MediaTek 802.11 Wireless Adapter Driver, MediaTek Inc.)

    WhoCrashed strongly recommend checking the updates for this driver.
    Can anyone suggest me how to upgrade?
    Thanks in advance.

    I fixed my problem 8.1 WIndows installation on my laptop.
    I have not had any crash since I installed it, which was 5 days ago.
    I gather that some drivers HP for Windows 7 dindn can't work properly.

Maybe you are looking for