Wireless and LAN problem with Thinkpad

Similar Questions

• Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

  Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

  Would you advice, thank you.

  Hi Hugo,.

  1. what anti-virus software you have installed in the computer?

  2. What is the full error message/code?

  3. the issue occurred after you install Minecraft?

  4. are you able to play Minecraft without any problem?

  5. what happens with Antivirus and Java?

  Windows Update can occur if one or more of the following conditions are met:

  1. the Windows Update database is damaged.

  2. antivirus software is configured to scan the %Windir%\SoftwareDistribution folder.

  3. the service (BITS) Background Intelligent Transfer Service does not receive a content link header.

  4. a required system file is incorrectly registered.

  5. Windows Installer has encountered an error.

  6. the manifesto of component maintenance (EC) is damaged.

  7. the Windows Update service has stopped during the installation.

  8. a version of the file conflict exists with Windows Update agent files.

  Please follow the steps described in the methods to solve the problem:

  Method 1: We will try the steps from the following link and check the result:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058?WA=wsignin1.0

  Method 2:

  To correct the errors that occur when you use Windows Update, install, and run the system update readiness tool. The tool analyzes inconsistencies on your computer and fixes as its current installation.

  You can view the following link to download the system update readiness tool and check:

  System tool update that corrects problems of Windows Update is available for Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Details of the event log to find what caused the Antivirus and Java to fail:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Hope that the information provided is useful.

  For any help related to this problem or any question of Windows, you can still display in the Microsoft Community Forum!

• Just bought Wndows Vista and having problems with the port for Palm 125

  I just bought a Windows Vista-based computer and have problems with getting my 125 Palm to synchronize with the desktop computer.  I get an error message saying: "No available Com1" what should I do?

  Thank you

  Frustrated

  Don't ask me the procedures step by step that I did, but I finally success!  I uninstalled Palm Desktop and started from scratch.  I unplugged the Hot Sync cradle by the USB port, then I installed Palm Desktop from my drive and then update Palm Desktop on the Palm for Palm M125 site.  It still does not, I manually added a port and manually changed to COM1.  I then pressed the Hot Sync button and in the Device Manager, a folder has become available "device named" with Palm Desktop as a subfolder.  It is always active, I updated my computer for Palm USB driver.  Miraculously it worked.  Thanks for your help, but as usual everything it needed, it was patience and trial and error to solve the problem, since it does not seem to be a quick fix related this topic.

  Message relates to: Palm m125

• I have Photoshop CS5.1 Extended with free upgrade to CS6. How do I re acquire this upgrade?  I upgraded my laptop from Vista to Windows 7 and had problems with the way he ran I did a full clean install of Win 7 and am trying to re install all my

  I have Photoshop CS5.1 Extended with free upgrade to CS6. How do I re acquire this upgrade?  I upgraded my laptop from Vista to Windows 7 and had problems with the way he ran I did a full clean install of Win 7 and am trying to re install all my Applications

  Please refer to I have Photoshop CS5.1 Extended with free upgrade to CS6. How do I re acquire this upgrade?  I upgraded my laptop from Vista to Windows 7 and had problems with the way he ran I did a full clean install of Win 7 and am trying to re install all my

  (Double Post)

• NB510-108 problem with wireless and lan controller

  Help, please!
  (answer in German would be nice, ill try English first tho)

  I installed ubuntu 12.04 on my toshiba NB510-108 (PLL72E-00R011GR) and then I was not able to go online via wlan or lan same kable.
  After some effort to install the drivers through ubuntu I have installed windows 7 starter edition back but now windows does not install the ethernet / wireless drivers realtek or atheros network device.
  so I tried to install all the drivers wireless by http://toshiba-asia.com/sg/support/drivers/ but now when I try to run these drivers after loading them down windows 7 cannot install correctly, it says that there is a compatibility issue. I tried to run these drivers in compatibility mode for win xp sp1 and win vista sp1 without success.

  Also, I installed all the drivers for my model of http://de.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=DE here with some of them have been properly installed and even when I get my system to a point where I find the two network devices work as 'good' in my windows Device Manager, the following problem occurs again:

  I can't find any of my netbook WiFi network (wlan is enabled via fn + f8) no matter what type of router I try to connect. other laptops have about no problem connecting to routers so that can't be the issue. When I click on the windows just below the wlan troubleshooting info it only says no problem could be identified (the system is in German, so please excuse my translation)

  In the information system components and devices of problem the pnp for the ethernetcontroller said pci\ven_1969 & DEV_1090 & SUBSYS... and for the networkcontroller: PCI\VEN_10EC & DEV_8176 & SUBSYS...
  If it is useful. I also wanted to put my dxdiag online file, but this extends the limit to 3000 characters.

  Someone here could help me please? It would be really nice

  Hello

  I m wondering why you have the same problems of connection using WLan and LAN.
  I mean its not really necessary to configure anything to get a connection to the local network works.
  The router must support, and DHCP must be enabled in order to assign the IP address automatically.

  I recommend that you check the TCP/IP settings in your network WLan and LAN connections.
  In TCP/IPv4, you can view the properties. The INVESTIGATION period and all other options should be set to assign automatically. You should also disable/uninstall the TCP/IPv6 and must use TCP/IPv4

  By the way: you have an antivirus and firewall software installed? If so, remember that the two don't affect the WLan/LAN connection.

• problem with thinkpad x220i and rangeplus router wrt 110

  Just got a new thinkpad x220i and whenever I try to connect to my wireless network, accidents of router and my cable modem seems to descend with her and the internet connection is also lost.

  I need to restart the whole nine yards.

  I got this router - rangeplus wireless wrt 110 for 3 years without problems with a mac, my ipad, iphone and my previous thinkpad x 201

  Someone has an idea of what could be the cause?

  very frustrating

  Thannks

  In the computer turn off IPv6 under properties for wired connections and wireless LAN.  Restart and try again.

• I keep having problems with my server DNS does not. Computer Blu - Ray player and wireless both have problems with the connection.

  I have problems with the server DNS does not.  I have been using my wireless on my computer and watching netflix on my Blu - ray player at the same time.  The Blu - Ray player froze and wouldn't connect.  At first, I thought that the network has not been configured correctly, but it worked not five minutes before.  I tried many things and I realized it was that my DNS server does not.  Does anyone have any suggestions?

  original title: DNS server does not

  Hi Dwright,

  1. have you made changes on the computer recently?
  2. not the problem only occurs when you watch netflix on Blu - Ray player?

  Method 1
  I suggest you try the steps from the following link to fix the server DNS does not problem.
  a. click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  g. Repeat steps for Internet Protocol version 4 as well.

  Method 2
  Try resetting Winsock2 from the following link:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista (applies to Windows 7)
  http://support.Microsoft.com/kb/811259

  Method 3
  Reset TCP\IP.
  How to reset the Internet Protocol (TCP/IP) (applies to Windows 7)
  http://support.Microsoft.com/kb/299357

  Additional information:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Windows 7 Home Edition Premium and Linksys E3000 and configuration problems with Dell/Broadcom half mini wireless 1501 wireless adapter DWLAN

  I'be been on the net looking for an answer requarding my Linksys E3000 router and my card adapter Mini PCI Dell/Broadcom DWLAN (DraftN) haf installed on my laptop Dell Inspiron N7010 XL 17 R and the inability to configure the card so he gets the same speed-172 wireless MBps_ as does our HP Vista Home Premium SP2 Laptop and Desktop! Yes, I spoke with Dell who seem to think that all their problems Tech and resolutions can be found with their technicians of the Manila-based Super (Word of warning-do NOT enter into the world of the concierge program of Dell Tech who, after having been assured it is based in the United States, I agreed to be a beta tester and lost my harddrive despite numerous attempts to stop the technicians to access remotely to do stupid things - but the new live Webcam and learn the hard drive but got none of my software original Dell with it as promised, too - another story). In any case, after playing with the DWLAN share of Dell said they question-nope Linksys ' cuz of course my other two computers would be quick at the speed they do. So I get ahold of Comcast, who of course told me, it's a matter of DELL. I have the WPA2 encryption on a network secure, but because my router there is no way to set up a "secure" network guest unless I have disable access to him (seems odd, he says: it is not guaranteed when someone trying to pass over the network, has knowledge password-weird with this router) it is anyway with this mini half DWLAN and the fact that it is not near the speed as the two other wireless adapters. My problem is with the speed I found all kinds of tips for use between Comcast Modem and Linksys router to make your network hum. What I want for now is someone to tell me how to configure this adapter on this Dell computer, so it does the job, it should. I have a program of diagnosis with her and from what I see, I must get off channel 1 as there is too much interference, but before I go and change the settings of the router, I want the adapter to work - especially since it's about 100 Mbps slower than our other wireless adapters. Does anyone know what should be the correct settings for this DWLAN 1501 or that I now need a new adapter in this laptop as well? Thanks for your help.

  LindaSView

  Hi Linda,.

  Have you tried to forget an instant wireless and bypass the router and cable connect directly to the modem to see if you get the speed you want in this way?  Yes, I know that this means to temporarily suspend the internet connection to the local network and also means the creation of a special no wireless connection for this computer.  But it could help determine if the problem is the computer and the router or wireless adapter - which excluding at least.

  If it works fine, then you can pass the wireless problem.  Otherwise, if it is still slow with a direct link, then you may need to consider another problem is involved and the router and adapter can actually be very well and you need to focus on all that is the bottleneck.

  I'm suggesting this to eliminate the possibilities that can be the underlying cause, while you spend your time on the development of bad (although I admit that I think that you are right and it is more likely - it can be useful a test just to be sure).

  Good luck!

  Kosh

• HP 550 wireless and Bluetooth problem on win 7

  Hello

  I had a problem with the wireless and bluetooth connection, since I upgraded to windows 7 x 64

  The problem with the wireless, it's that I can't find not all devices wireless in range (even if I have a wireless router at 2 meters far from providing internet to a laptop computer and two mobile phones)

  I tried the drivers on the HP site, but I only need to support vista x 86 drivers.

  I also tried the drivers from a previous post on this Board link here (the broadcom wireless drivers) and even if they normally show on Device Manager window, always get a "turn wireless capability on" when I solve the problem. And Yes, the light on the wireless button is in blue (not yellow)

  The other thing with bluetooth is that I get some unknown bluetooth devices on the window of device as in this photo manager.

  

  I have no idea what to do now so please help.

  Thanks in advance.

  Hello

  Check the guide below:

  How to install the driver Bluetooth HP Windows 7.

  You will need this driver:

  HP wireless Assistant here (ver 3.50.11.2 for 32/64-bit Win7)

  Bluetooth wireless here (ver 6.2.1.500 for 32/64-bit Win7)

• Can I connect to the Deskjet 3050 wireless and LAN?

  I have connected to a new deskjet 3050 by WiFi. My laptop and iPhone worked well. I have an old desk top that has no WiFi. Can I also connect it to the 3050 by LAN? The office is connected to the router by LAN so it mails to my hpeprint but I would like to connect it directly to the 3050.

  Hello

  The HP Deskjet 3050 include wireless connectivity options and USB, the printer does not include any LAN interface...

  The printer connected to your wireless router, connection from the desktop to the same router via an Ethernet connection is sufficient, the type of conntaction used network is not serious as long as both devices connected to the same router.

  Make sure that ethernet cable connected to your router with a desktop computer and run the installation by selecting the wireless connection, the device should be detected on the network...

  If you wanted to can use a USB for PC connection, you can do the same. the wireless and USB connection can be used simultanly.

  Shlomi

• Unable to connect to the internet and have problems with the help of program network Toshiba

  Original title: I can't go on the internet?

  I try to go online to check my bank account and net work of toshiba program will not cone upward on my screen.i have a blank page.

  Hi Alice,.

   

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You are unable to connect to internet and unable to use a Toshiba network program.

  1. what browser do you use?

  2 are you able to open other sites?

  3. Once you get a white page?

  4. do you get error messages when you try to open the site to the Bank?

  5 did you do changes on the computer before the show?

  6. who is the program of Toshiba network you're talking about?

  To work the issue with cannot connect to the internet:

  Method 1:

  See the site:

  The problems of Internet connection

  http://Windows.Microsoft.com/is-is/Windows-Vista/troubleshoot-Internet-connection-problems

  Note: Apart from using the Internet connectivity evaluation tool, all the other steps are applicable to Windows 7 as well.

  To work the issue with Toshiba program:

  Method 2:

   

  Reinstall the boot program:

  Step 1: Clean boot

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

   

  Check out the link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 3 of section to set your computer to normal startup.

  Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).

  Step 2: Uninstall the program

   

  See the site:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Step 3: Install the program

   

  If the problem persists, then you try to get help on the Toshiba forums site:

  http://forums.Toshiba.com/

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

   

   

• Firefox and serious problems with the police on the websites bloglike.

  Firefox on my computer has some serious problems with the police on some sites, such as: twitter, tumblr and a few other bloglike.

  Images:
  Twetter / thumblr / other

  Yes, it is more likely a hardware acceleration problem or a problem with the specific fonts (rendering).

  You can do a test of fonts to see if you can identify the corrupted fonts.

  • http://BrowserSpy.dk/fonts-Flash.php?detail=1

  You can use this extension to see what fonts are used for the selected text.

  • FontInfo: https://addons.mozilla.org/firefox/addon/fontinfo/

• New and strange problem with Rhapsody to go on my Sansa Fuze

  Have a Fuze with 8GB micro SD 8 GB card inside and use for a long time without any problem with Rhapsody. Recently, I had not synchronized for a long time and got the message to play the tracks of my subscription, I need to sync with Rhapsody. So I don't tell me, no problem, and I do. The synchronization works very well and I get the message Rhapsody, it's reading the tracks on my Sansa and I get the message that it updates the internal memory on my Sansa. Then everything is finished and when I click on the internal or external memory, Rhapsody, I get the message that all is well and she sees all my Sansa great Flickr photos. I even put a couple of new albums of Rhapsody on the SD card in my Sansa. Once again, no problem.

  BUT when I disconnect the Sansa (again once, normal behavior with the green bar on the Sansa screen and the message it refreshes my media), he always says I have to synchronize to play the tracks on my subscription.

  Have tried resetting the sansa, tried the sansa when logged in to rhapsody, but nothing seems to solve this problem of license. How can I fix?   Thanks a lot for your help

  Ah, I leave you with the secret handshake to reset the secure clock.  Normally, this is done in this last step, when you transfer a track to the device.

  Open the client Rhapsody 4 and plug your rocket.

  Now for the tricky part.  Crack the knuckles and fingers ready.  Press and hold the [CTRL] + [SHIFT], then right-click on the "rocket" in the Sources pane.

  There you go.  Select Reset secure clock.

  See if the device is now happy.

  If all else fails, use the Format command on the "rocket", which will erase all media device, and then start over by allowing first and transfer some test tracks.

  My theory is that something is wrong with your secure clock...  Let me know how it goes!

  Bob

• Webview from landscape orientation to portrait mode causes the font size to become smaller and a problem with the context Menu

  Hi, I have a webview with inline html. It works fine except that when I pass in landscape mode, the screen fills fine and the police grows, but when I go back to portrait fonts are tiny, even smaller then when initially in the portrait. I am installing this on a Z10 with cascades 10.1 SDK. Is this a Bug somewhere in the SDK or BB10?

  Another problem I have is in Web mode, the shortcut menu appears when I touch a Word. I is no need to use the context menu. How can I get rid of him. In the case where I would like to someday use this menu, I would need to add code to it. I can't find the code. Where can I find it?

  Thanks for your help

  Concerning

  Roland

  I' to propose taying far WebView as much as possible and using TextArea (with type HTML). There are still a few bugs present in WebView that make it unpleasant to use.

  You cannot get rid of the context menu, so it will disappear once you remove WebView. You can still share with other methods.

  This may seem more work and it's probably, but it's going to do to improve the user experience and fewer headaches for you.

• Contacts synchronization to Smartphones blackBerry and calendar - problems with Outlook Connector (and other things).

  Hello world

  I just got my first BlackBerry (storm) and this is my first post on the forums.  I read around a lot and found pieces of this problem but no definitive answer (which I understand).  So, I know it's a delicate subject, but really hope that someone can help you.

  FYI, I use Windows Vista and Outlook 2003 with the connector Outlook synchronize my e-mail, contacts and calendar on my Windows Live Hotmail account.

  I installed the Desktop Manager software V.4.7 and crossed to set up > sync and selected Outlook for Contacts.  The wizard all seems to work OK but then when I press "Finish" I get the error message ' file is does more part of the system data source or the couldnot folder is located.

  I partially understand the idea that my Contacts are not in Outlook, they are in my hotmail/live account.  My question is how can I work around this problem and import my contacts to the BlackBerry?  It will not accept an exported .pst file or can it link directly to hotmail?

  (On the basis of the advice on the forum), I found is you go into Outlook and adjust the settings of your e-mail account to send incoming emails into "Personal folder" instead of "* @hotmail.co.uk ' then he manages to pass the error message, however, I found no data calendar or contact in my outlook personal folders for BlackBerry to synchronize with a time that I did."

  I'll try to do a few requests on a Microsoft forum on the features between Outlook and Hotmail to see if there is an easy way to get my data anywhere in the personal folders so that the BlackBerry it can sync from there.  I'm afraid to lose emails or functionalitly to the Outlook Connector on my PC to subsequently change the default e-mail folder.

  Sorry for the length of the message but thought the more detail the better - thanks in advance for any help you can offer,

  Al.

  Just in case anyone else has this problem, I got a work around (not a solution, but it works).  In Outlook, go to Contacts - export to file and select: separation by comma (Windows). CSV file - save it to your PC.

  Then open a Yahoo mail account (if you have not already one) go to Classic view, Contacts and to the right of the screen, there is an option to import/export.  Select the location of the CSV file you saved on your PC and transfer it on Yahoo.

  You can now go through the DM Assistant and select sync with Yahoo.  It is ideal to add contacts to the phone for the first time.  Don't forget to make sure that everything is up-to-date and complete in Outlook Contacts before export to the CSV file.

  If you want to add contacts to the future, the best way is to add to Outlook first and then go through the process of exporting the CSV file again - this will ensure that all records are the same.  Although if you wanted too, you can also export from BB in Yahoo, then in Outlook as Yahoo also exported contacts to a CSV file.

  Hope that helps someone...

  Al.