Wireless Auto configuration will NOT be enabled.

Hello

Earlier today, that I made the mistake of clicking on my Dell WLAN wireless network icon thus enabling and disabling my Wireless Zero Configuration.  Immediately, I went to services.msc and WZC it again but I can't seem to get it remains activated.  Once I restart my computer, automatic configuration is disabled.  I disabled Broadcom in my Start Menu.  I added to the .bat file according to the instructions, I read (see below), and it still does not work!  Already both WZC and WLAN Dell appeared simultaneously in my Start menu without interfering Dell.  Now, I can't even stay WZC.  Someone please help!  I want to use WZC.

4. use Notepad to create the following batch file:
off @echo
c:\documents and Settings\Votre CD name name\
Start wzcsvc sc config = auto &
SC start wzcsvc

"your name" is the name that appears when you click on 'start '.

Save the file in c:\windows\system32 local disk
"Save the file with a file name that will make sense for you, with the extension".bat ".
Be sure to select "all files" on the next before clicking 'Save' field

Copy this file and place it in your startup folder.

location of your startup folder.
local disk C:\document and settings\yourname\start demarrer\programmes\demarrage\

In addition, both WZC and WLAN Dell were unable to detect the wireless network where I'm staying.  The two WZC and Dell sense other, weaker networks without wire nearby but neither one of them show my wireless network.  All other computers that visit this House has no bad, but mine doesn't.  Any ideas?  Thank you.

Hello

Read this, http://www.ezlan.net/infestation.html#startup
Use this utility to look at the startup and uncheck the entry that starts the Dell/Broadcom wireless utility.

Otherwise, look at support page from Dell for your computer. If Dell of own drivers (no utility combo), download them.

Uninstall the Dell how utility that you install any program and update the card wireless with the downloaded drivers.

Here how to download drivers and unzip it to a folder of your choice.

In Device Manager, right-click on the adapter.

Click Update drivers and choose her browse my computer for drivers.

Choose let me a list of choices, click on disk and point to the folder with the drivers.

Jack-MVP Windows Networking. WWW.EZLAN.NET

Tags: Windows

Similar Questions

  • Wireless Auto configuration does not work after that manual set up

    Wireless Zero Configuration (WZC) stopped working on my computer at random.  I went online found some resources how to click Run, put in a formula and get it up and running again. It worked... once. When I turned off my computer and turned it back the next day, WZC did not work again, so I went through the whole process, once again, but now it doesn't work at all. I guess I should just uninstall and reinstall the Configuration automatic service, but I assure you that I do things. Can someone help me if I can do my work on my computer again? Thank you

    Yes, it's the process that I have lived, more than 15 times.  When you make my hours of searching, he had 3 different codes to use when using:

    Start > run

    1 %SystemRoot%\system32\services.msc/s

    2 ncpa.cpl

    3, sysdm.cpl

    Regarding the third party... my laptop is very old, but I took good care of her. This issue is literally something that started when I turned it on.  Wi - Fi, I have a "Broadcom" symbol (which was always there) in my quick launch.  Other than that there is no component of third-party wireless known on my computer.

    The command symbol Broadcom wireless utility IS a third party.  Although you can have the icon in the notification area since you had the computer, it must have been turned off and is now activated.  Either click or right-click on the icon of Broadcom and see if you can find a section 'options' or 'preferences' which will allow you to disable for Windows order your wireless card.

  • If you use Firefox and Bing, search auto suggestions will not meet even if all options for this are enabled.

    If I try to search using Firefox as my browser and Bing as my search engine, auto suggestions will not fill. Can I use any other search engines with Firefox and they work and I use Bing in other browsers, and it works.

    If you have installed security software (antivirus, firewall etc.), you can try to remove all instances of Firefox and its process/associated files in all modules/areas of different configuration software safety like surveillance process, spawned the sub/process control, virtualization, HIPS etc., in addition to the main security software control panel. Instead create new rules entirely authorized/reliable for Firefox + its associated processes in all the different modules/panels - one installer of Firefox as well as all real/original exe (Application) installed and DLLs (Application extension) is digitally signed by Mozilla Corporation (right click > properties > Digital Signatures). Even otherwise, some security software may also ask again when Firefox and/or its sup processes are started, and you can be able to allow/trust at this time. Please see this.

    The AV/Firewall configuration

    If security software problems can be excluded, you can also reset Firefox and check.

    The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
    Note: This will make you lose all the Extensions, open Web sites and preferences.

    To reset Firefox, perform the following steps:

    1. Go to Firefox > help > troubleshooting information.
    2. Click on the button 'Reset Firefox'.
    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

    This solve your problems? Please report to us!

  • Wireless zero configuration does not start automatically. I need to run it whenever I restart the computer

    Wireless zero configuration does not start automatically.i have to start whenever I restart the computer. I have a laptop dell inspiron

    Moved from feedback

    Original title: WiFi

    Hello

    1. what version of Windows is installed on the computer?

    2. is it works much earlier?

    3 have there been recent changes made on the computer before the show?

    To activate the Configuration service automatic wireless so it starts automatically, click the Start button. Select settings , then select Control Panel.

    If you use Windows XP display, select the performance and Maintenance category, and then select Administrative Tools.

    If you use Classic view, and then select Administrative Tools. In the left pane, click the Services icon. Click the automatic Wireless Configuration icon in the right pane, and change the box Startup Type to Automatic.

    This parameter will be defined the service starts automatically at boot time. Then click on the Start button to start the Wireless Auto Configuration service zero wireless and click on the OK button.

    The automatic Wireless Configuration can also be started and stopped from a command prompt.

    To start the automatic Wireless Configuration, run the following command:

    net start wzcsvc

    To stop the automatic Wireless Configuration, run the following command:

    net stop wzcsvc

    For more information, see the link.

    Wireless Zero Configuration Reference

    Please post back with the results and we will be happy to help you further.

  • Wireless Zero Configuration Service not installed

    original title: Wireless Zero transactional Service not installed

    My top of Office XP Sp3 Dell doesn't seem to have the Automatic Configuration Wireless installed under the heading 'Services '. How can I install?

    1. click on the Start button and then click Control Panel.
    2. If you are in category view, then click Network and Internet connections icon, then click the network connections. If you are in Classic view, double-click the network connections icon.
    3. in the window network connections, LAN or Internet high speed, select the icon to connect to the Local network. In the menu bar, click on file and select Properties, or simply right-click on the Local area connection icon and select properties from the context menu).
    4. in the Properties window of connection of LAN, on the general tab, click install.
    5. in the window select the component Type of the network under "The type of network component you want to install, click" click to select the icon of the Service, and then click the Add button.
    6. in the Select Network Service window, click on the diskette provided button, click the Browse button.
    7. in the window to locate file, navigate to the C:\Windows\Inf folder (this is a hidden folder). Click to select NETWZC. INF, and then click the Open button.
    8. in the window to install it from the disc, click on the OK button.
    9. in the window select the Service network, in the Network Service box, select Microsoft as the manufacturer, and then click Wireless Auto Configuration.
    10. click on the OK button.

  • I have a Buffalo wireless card that will not get a wireless connection. "No wireless network in range.

    original title: NIC Buffalo

    I have wireless G 54 Mbps Buffalo Airstation net card and cannot get a wireless connection. I've already tried uninstalling the software/drivers, reinstall the software/drivers.  I tried to enter the IP address manually, but I get the same message.  "No wireless network in range.  I can use the adapter wireless interal very well, but want to use the faster card.  Someone at - it ideas?  The router is a D-Link, and is not mine, so I can't do it around with her money.

    Thanks in advance,

    Sharon

    Hello Sharon,
     
    Follow the methods given in the order.
     
    Method 1: Restart the Wireless Auto-Configuration service

    To restart the service automatic wireless setup follow the steps below.

    i. Click Start
    II. click on run
    III. run window, type the command services.msc and click OK
    IV. on the list of services, select Wireless Auto Configuration.

    v. Double click on the service
    VI. click on stop and then click Start
    VII. click on apply, then OK.
     
    Restart the computer and check.
     
    Method 2: Try the steps listed in the following article and check, if it helps in fixing the issue:
     
  • Windows Vista detects the wireless network but will not connect to it. Two other users in the same office connect without difficulty.

    The title says it all really.

    I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.
    Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.
    Help, please.
    Thank you.
    original title: vista detection network but will not connect

    Hi JulianBeach,

    1. you have made no changes to the computer before the broadcast took place?
    2. What is the exact error message you get?
    3 is connected to the domain of the computer?
    4. what happens when you try to connect to the network?

    Try the steps from the following link:
    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Additional information:
    Wireless network card: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  • HP 8600; Printer says it is ready for wireless printing, but will not print my documents. It prints all the pages of the test very well. What I am doing wrong?

    Printer says it is ready for wireless printing, but will not print my documents. It prints all the pages of the test very well. What I am doing wrong?

    Contact HP support.
    http://h10025.www1.HP.com/ewfrf/wc/pfinder?cc=us&DLC=en&LC=en&tool=&query=8600#n251

  • Portege M750 Win7 64 bit Wireless Manager (3G) will not work

    I can't TOSHIBA Wireless Manager (3G) to work in a new installation of Win 7 64 bit.

    I did a test installation of Windows 7 64 - bit on and old SATA hard drive and checked TOSHIBA Wireless Manager would work. He did.

    I then did a fresh install of Windows 7 64 - bit on a new Crucial C300 Real SSD 256Go.

    The new facility with the Crucial SSD is not very successful... The operation "stop and restart" does not - the closing not always power off completely and you must push the switch down to.

    Sometimes the SSD does not start - you enter the password of the BIOS but then nothing happens. Sometimes you turn off the power and remove the battery before as the startup disk.

    But the biggest problem is that the (3G) Wireless Manager will not work. The application opens and indicates that "died" - which it is impossible that I use WiFi to post this question.

    I tried to install the software Vodafone 3 G portal. It detects the presence of the 'mobile device' (SIM in housing) but then can not turn it on.

    I downloaded and installed all the latest drivers for the chip, the pilot 3G, 3G software, LAN driver, LAN software and all updates of Windows 7.

    I have the latest version of the BIOS (3.0) but this has not been updated by Toshiba since 11/04/09.

    I would point out that Diagnostic PC Toshiba tool does not recognize the installed 8 GB memory (but ccleaner):

    Model name PORTEGE M750
    Part number PPM75E-00N017EN
    Version of the OS Microsoft Windows 7 Home Premium 6.1.7600
    Version of the BIOS Version 3.00
    Processor Intel (r) Core (TM) 2 Duo CPU P8400 2.26 GHz
    Physical memory 4096 MB RAM
    Disk capacity hard 256,052,899,840 [bytes] 238.468 [GB]
    Network Intel(r) 82567LM Gigabit Network Connection = 10.0.2.2 version = MAC address
    TOSHIBA F3507g Mobile Broadband Network Adapter version 1.3.0.9 = MAC = address
    Version of Intel(r) WiFi Link 5100 AGN = 13.4.0.9 = MAC address
    F3507g Mobile Broadband Modem Modem TOSHIBA version = 5.24.3.0
    Internet Explorer 8.0.7600.16385

    This indicates a BIOS problem?

    -don't

    points to a problem of firmware on the SSD drive (is it sandforce) torque to the incompatibility of BIOS of the SSD.

    I assume that all drivers installed etc were identical on the installation of the trial of HARD drive? so if this is the case it must be the SSD does not not with the BIOS correctly, so the other issues as well

  • Hardware configuration will not work under Windows 8

    Hello guys,.
    I'm here because I can't get the hardware configuration (v. 1.63.1.34C) working with Windows 8.
    I would like to know if there is a recent version more or a way to get the program to work.
    I can install it, yet when I open it, it just won't do a thing.
    I use a Toshiba Satellite P755.

    Thanks to anyone who can help!

    Post edited by: rfscouto

    Thanks for the last comment. All you can try right now is to use the stuff offered for the newer models, but I imagine that this will not help a lot.

    I'm afraid it takes a bit of m.

  • Satellite Pro 2410 - Wireless card (Belkin) will not allow

    Hello

    I have a Toshiba Satellite Pro. I think it's a 2410, the model is PS241E-5G7U9-EN. I also have a Belkin Wireless PSMCIA card, model No. FSd7010. For a long time * these worked perfectly.* the computer serves pretty well, and I received it as a gift.

    About 7-8 months, I had a catastrophic failure. I do not have the restore disc, so I had to do a format and a new install of XP Pro, and then I added drivers Toshiba etc. supplied with the PC, as I had this drive. I updated Windows SP3. The Belkin card took the latest downloaded drivers.

    First of all, I had huge problems to make the card work, due to all kinds of conflicts and other issues. Now, the card will work, BUT only when the machine has 100% power. As soon as this fall, or if the machine is cut off in any other way that a stop (Hibernate, or lid closed), the card Belkin turns off and will not allow all. It allows for a second, detects the networks, then turns off.

    Normally, I have to wait to be able to reach 100%, uninstall and reinstall. It is massively frustrating. I know that the PC is quite old, but it is a useful tool to the top and its primary function is Wi - Fi browsing. Anyone know how I can fix this problem? He worked before so it should again.

    Hello!

    You have installed the laptop with the Toshiba Recovery disk?
    You have the same problem with SP2?

    Try to test the PCMCIA card in a different cell. Maybe it's a problem of the PCMCIA card.

    Good bye

  • Blackberry enterprise server configuration will not accept the connection.

    Original title: remote terminal BlackBerry or resource will not accept connection

    Blackberry enterprise server configuration

    H

    1. What operating system is installed on the computer?
    2. What exactly are you trying to achieve?
    3. What is the full error message received?
    Since your post looks like this, the problem is related to the server, Blackberry enterprise server, that's why I suggest you to report the issue to the links below for assistance:
    I hope this helps!
  • Wireless network adapter will not install on Windows XP Pro-life said a wireless network card is disabled.

    I bought a Skylink® USB 2.0 802.11 g / n Mini adapter with 3dBi antenna wireless network. It will not install on my Windows XP Pro.  Said A WLAN card is disabled.  What?  I don't know what that means.  What can I do?

    Hello

    I suggest you follow the troubleshooting steps form the article and check if it helps.

     

    How to troubleshoot wireless network connections in Windows XP Service Pack 2

    http://support.Microsoft.com/kb/870702

    Also check with Skylink® support site for more information about the issue.

  • Windows 7 does not start; Startup Repair won't work; Know last good configuration will not work

    Windows 7 64 bit machine. Automatic Windows updates were installed during the night; has started acting strangely this afternoon.  After an attempt to re-start, got the "Windows Error Recovery" screen with the "Windows did not start. A recent message HW or SW change might be the cause".  When I try to 'Launch Startup Repair' a screen returns but just hangs.  When I try to "Start Windows normally", it brings back me to the Windows error recovery screen.  When I hit f8 for when you start to get the screen "Advanced Boot Options" and try to go into secure Mode or use the last good known Configuration option, each one brings back me to the Windows error recovery screen.

    Any ideas on how to get this resolved?  Thank you!!!

    Hello

    The problem is since it will not run the startup from the Windows 7 disc repair you then you
    need some kind of support, and the cause is likely to be material. A Dell thing you want to do
    is to restore the system back to the factory plug 'IF' possible so it would be a good idea to save the
    data before calling their (possible an another 'IF'). Try to put the hard drive in another computer
    as the 2nd disc (best method) or in an external case USB (less likely to work) and then copy
    data on removable media such as CD, DVD or other external USB drives.

    Good idea to check with the technical support Dell, their online documentation and the Dell forums where he
    perhaps others with the same problem.

    Dell support
    http://support.Dell.com/

    Dell support drivers - product manual & warranty Info (left side) - and much more
    http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

    Dell forums
    http://en.community.Dell.com/forums/
    Other choices would be a real store of the computer performing the internal repairs (not the leeks and the glances at one
    Best Buy or other stores). Of course if she has any warranty Dell is the best choice, and
    can be in effect regardless of any warranty.

    I hope this helps.

    Rob Brown - Microsoft MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Why my wireless function key will not turn on my wifi?

    I pressed on it by chance, and now it will not go back. I did a system restore, but two days later he returned as it even once...

    Hello

    What is the brand and model of the computer?

    You need to maybe also enable or disable the laptop WiFi by pressing the function key and pressing F2.

    Method 1:

    We will run the network troubleshooter and see if it can detect and correct the problem.

    Open the utility of network troubleshooter by right-clicking the network icon in the notification area, then click on the problems.

    For more information, see the "Microsoft Help" and "How-to's Article" :

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    Method 2:

    You can also follow the steps and check.

    1. Click Start, type center network and sharing in the start search box and press ENTER.

    2. click on change adapter settings.

    3. right click on the connection, and then select activate.

    If the problem persists, contact the manufacturer of your computer for known problems.

Maybe you are looking for

  • I want TB to go to the next message above after that I deleted a msg

    Thunderbird manages four email addresses for me. I put them all to have the most recent messages at the top of the list and I move through them from the bottom. The first day, TB asked if I wanted to DELETE to move to the next higher E-mail (which, f

  • Add 2nd hard drive for HP Pavilion 500 210qe

    HP Pavilion 500-210qe desktop Windows 8 I want to add an additional hard drive. There are a lot of empty space in the box. There are two empty SATA sockets on the motherboard. There is a power outlet extra. But I do not see how to fix my new drive me

  • I noticed that my user name in the C drive has disappeared and is displayed under the desk

    original title: save files on the net / backup of the files in the C drive These 20 to 30 days, I noticed that my user name in the C drive has disappeared and is displayed under the desk. In addition, whenever I try to save a file on the net on my la

  • WLX Photo Library Main dll

    error message appears when you click Windows Live Photo Gallery WLX Photo Library hand 0x800736b1 dll error code. Help, please.

  • How can I re - install my printer

    A few months back my computer has a virus and I had to back up everything on dvd. Then when she came back on everything's wiped to it. I need to use my printer but it is no longer installed and I can't find the disk I got with my computer. How can I