Wireless cause: the network connection from the laptop to the router, but internet access comes and goes through procedures to 'fix '.

Similar Questions

• Access wireless to the printer without internet access?

  I have a HP Photosmart c4385 implemented wireless (linksys wrt54g - wpa2 encrypted router).  Connected to this system is a PC running Vista (soon to Win 7) and a laptop running XP.  Everything works fine.  My daughter received a PC with wireless capabilities that it wishes to use for homework in his room.  I don't want to have access to the internet in his room, but it would be great if I could add to the network for the purpose of the use of the printer only.  Is this possible?  Thank you.

  She will have access to the Internet if the router doesn't work.  I think that you can't do what you want here.  I'm sorry.

  If it helps, you can use the printer port USB AND wireless at the same time.  She could go back to the printer, Plug and print.

• WRT120N Wireless laptop connected to the router, but does not connect to internet

  I have a HughesNet HN9000 modem connected to a Linksys WRT120N router. I have two desktop computers, both running XP Home, connected to the router via ethernet .5e cables and work perfectly. I have a laptop running Vista Home Premium, I am trying to connect to the internet via the internal wireless card. According to me, the laptop connects with the wireless router, as it connects but says 'Local only' - it won't let me access the router IP/control panel. I tried to reset the router / modem as well as the parameters of the laptop, but I keep getting the same question.

  If I connect the laptop and the port #3 on the router via a cable .5e I can browse the Internet. But I need to be able to use the laptop throughout the House so electrician is not an option.

  I found this article which directed me to this download , which worked. If your help is most needed. Thanks anyway.

• Laptop HP G70 connection to the router but not the internet

  I have a laptop HP G70 running windows 7, I got a new router installed. My computer to the router, but not to the internet links. I tried the software updates for my drivers running, doing all used to end router for example change etc channel/parameters/IP wifi. I tried to turn off the wireless, reset the router and re enabling it does not work.

  It will connect to the internet ethernet of nis.

  My laptop connects fine with other networks if it is not wireless.

  All other devices are connected to the router.

  Please help this is extremely frustrating.

  You are the very welcome.

  I compressed the file and downloaded on my Skydrive account, which I shared the link below.

  Download, unzip and run the file called sp54972.

  https://onedrive.live.com/redir?RESID=832F4957D2E51B93! 263 & authkey =! AEOhdjA3QVhETy0 & ithint = % 2czip

• my laptop connects to the router but said validation of identity and remains in this mode

  using windows XP my laptop connects to the router but I preserve identity validating is... can help you?

  This probably means that your WiFi has become misconfigured.

  • Open network connections (start > run > ncpa.cpl > OK)
  • Right-click on your wireless adapter icon and select "Properties".
  • Click the "Wireless Networks" tab.
  • In the list of "Preferred networks", select the entry that corresponds to your router, click 'properties '.
  • Click on the tab "authentication."  At this point, you should see a screen like this
  • Uncheck the box at the top that says: "authentication Enable IEEE 802. 1 x for this network. "
  • OK your way out.

• Try to connect to the wireless computer after freshly installed Windows says I am connected to the router, but I have no internet access

  Original title: connection problem

  Hello! I recently did a clean installation of Windows 7 Professional 64 bit and I use a wireless USB adapter. Windows says I am connected to the router, but I have no internet access, and I have this yellow on trinagle. Work of all my other Windows 7 PCs, but this one. Could someone help me? Thank you!

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue. I see that you are unable to connect to the wireless network after you perform a new installation.

  I suggest you to consult the steps described in the article:

  Method 1:

  You can try the steps in the link and check.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  You can update the driver of windows 7 on the manufacturer's Web site.

  Method 2:

  
  You can remove and re-create the wireless network connection, follow these steps:

  a. Click Start, type ncpa.cpl , and then press on Enter.
  b. right click on your wireless network connection and then click Properties.
  c. click the wireless networks tab.
  d. under preferred networks, click your Wireless
  network and then click on remove. e. click on view Wireless networks.
  f. under management of the network, click refresh the network list.
  g. under Choose a wireless network, click the wireless network to which you want to connect, and then click Connect.
  
  Method 3:
   
  
  If the steps above don't you can uninstall and reinstall the NIC drivers and check with the question.

  a. click on Start menu, in the Search tab type devmgmt.msc and press ENTER.

  b. right click on network adapters and click Uninstall and restart the computer.

  c. after rebooting, install network cards and check with the question.

  
  Method 4:
  
  You can temporarily disable the antivirus and firewall on the computer and see if it helps:
  Enable or disable Windows Firewall
  
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  NOTE: Turn off Windows Firewall might make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
  You can see the following link to disable the Antivirus installed on your computer software.
   
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Please follow these recommended steps and post if you still experience the problem. I'd be happy to help you further.

• I have a Wireless N card and the router, but only to connect to wireless-G speeds

  I just got a new HP DV7T with a N (with bluetooth) wireless card: Intel Centrino Advanced - N 6200 AGN

  I use a Netgear wireless router (WNDR3700) double radio.

  My wife's cell phone can connect to the router with a N Wireless card at a speed of 170 Mbps.

  My laptop can connect only to 54 Mbps. I checked that I am connected to radio N of my router (the radio of G/B/A has a separate connection).

  I found a useful post here:

  http://h30434.www3.HP.com/T5/wireless-Internet-and-home/wireless-does-not-seem-to-connect-at-802-11n...

  I followed the advice of responses and checked all the settings of the router (but the success of my wife to connect at speeds N essentially rules on the router) and checked the settings of the adapter to make sure it helped N.

  I wonder what it is that I'm missing. Any suggestions would be greatly appreciated.

  Thank you.

  I was able to determine the problem after extensive web searches.

  I was using the WPA-TKIP authentication which, in some cases, prevents the speed N Wireless.

  Once I changed WPA2-AES authentication radio N I got immediately 300Mps speeds and it varies between 240-300Mbps now.

  I hope this will help others with the same question!

• Sharing internet connection from my laptop Sony VAIO Windows 7

  Hello

  I use a Modem of Dongle USB into my laptop which is a Windows 7 laptop, by which I connect to internet on my laptop. Now, I want to share this internet connection from my laptop with my Nokia Lumia 620. Please tell me details how to set up my phone as a wifi router. While my 620 Lumia cannot detect my laptop wifi signal.

  Actually, to clarify, I want to use my laptop as a WiFi router to connect Internet to my 620 Lumia. That's all. Thank you.

  Please note that I use the Dongle USB Modem for internet connection in my laptop and my laptop has WiFi support
  
  Also, I tried to share internet from my laptop through the technology Intel® My WiFi for my Nokia Lumia 620 but when I tried to connect my phone sent me a message that says: "your phone could not connect to the WiFi network, because there is no response from the network. Please try again later.

  Hi Sajid,

  Thanks for the reply.

  There is no option/feature to share the internet connection between computer and mobile. As Ramesh, said that you will need to install any third-party program or app to perform the task. As I see you have answered in the response of Ramesh with the third-party application names. We recommend not all third-party programs for the task you are trying to run.

  I suggest you to contact the Nokia support for assistance.

  Nokia Support: http://www.nokia.com/in-en/support/product/lumia-620/

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Please do not hesitate to visit our Web site for any help with the Windows operating system.

• Vista can communicate with the wireless router, but cannot access the internet

  I have a SONY Vaio with Vista.  Until recently, it worked fine with an old router Netgear wireless with no encryption.  I replaced the router with a Linksys E1200 and set up for WPA/WPA2 encryption.  My iPod, iPad, an HP printer and laptop running Windows 7 quite change with absolutely no problem.  After entering the SSID and password on the Vaio, it connects to the router but will not access the Internet.  I tried to reset the router and cable modem, without success.  Suggestions before you start the laptop across the room and rid my life of the bane of Vista forever?

  Hello

  ·         What is the antivirus installed on the computer program?

  Let's try the following methods.

  Method 1: Temporarily disable the antivirus on the computer program and check if the problem persists. If no problem occurs, then you need to firewall settings in the security software.

  Note:  Check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

  Disable the anti-virus software

  Method 2: Follow the steps in the article mentioned below.

  In the Windows wireless network connection problems

• Win7 64 bit, connects to the router, but no error internet access-"page not found".

  Original title: Win7 64 bit, connects to the router but no internet access.

  Help! Windows 7, XP Home Edition Premium, 64 bit, connects to the router and I can access the network. However, I can't access the internet. PC was working fine until a few days when I was using IE Explorer and I suddenly got the error "page not found". This pc internet connection uses the onboard network controller. I rebooted the pc and used the option "safe mode with network. The pc worked fine and I had access to the internet. I restarted the pc and still no access. I tried a usb wireless adapter. No luck. I have not installed updates or software recently. My other 2 PC works fine. I tried to use the network troubleshooter and he could not find any problems.

  Hello

  1. Have you made changes on the computer before this problem?
  2. What antivirus application do you use?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.

  http://support.Microsoft.com/kb/929135

  Note: Please go up to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem

  Method 2:

  I would suggest trying the following steps and check the status of the question.

  a. open Internet explorer.

  b. click on tools, then on Internet options.

  c. click on the Connections tab.

  d. click on LAN settings.

  e. uncheck the option use a proxy server for your LAN .

  f. save the changes by clicking on apply and ok.

  Method 3:

  Configure Internet Explorer to disable simplified HTTP error messages and check the status of the issue.

  a. on the Tools menu, click Internet Options.
   
  b. on the Advanced tab, in the browsing section, disable friendly HTTP error messages display check box and then click OK.

  c. close Internet Explorer.

  d. restart Internet explorer and check the status of the issue.

• Connects to the router, but cannot send or receive data

  I have a WRT54G.  I can find the network and connect to the router, but I can't send or receive data.  I tried to connect directly to the router and I still not able to send or receive data. Both computers on the router has the same problem.  I did a reset the router back to the settings by default and still no luck.  Any thoughts?  Thanks in advance for the help.

  The first thing you can try is when you the Modem and the router is connected to the other, disconnect the power from the router and Modem, wait 30 seconds and then plug in the power to the Modem and once all the lights are solid, then connect the power supply to the Linksys router, now check if you are able to go online. If still no then...

  Who is your ISP. So I think you need to re - configure all settings of your router again.

  If your Internet Service is cable follow this link

  If your Internet Service is DSL follow this link

• Opening links in a new tab will also load the link on the problem of temporamental currnt tab that comes and goes. Sometimes using links from google as well.

  Opening links in a new tab will also load the link on the problem of temporamental currnt tab that comes and goes. Sometimes using links from google as well. Never had this problem before. Also the SafeSearch feature on google has itself locked on strict, not too much problem, but has happened at the same time my links and tabs not working like I want.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Please help to configure the router for internet connection 871W!

  Hello world!

  I just started styding for CCNA, so I'm totally new to Cisco stuff. Recently bought a router 871W and spent two days in a row trying to configure internet connection with no luck! I use the port console for the configs and SDM/CCP. Would be greateful if someone could tell me how to do simple configs of internet connection. I googled everything but it's still confusing. I can't assing all-IP ports FA 0-3. I used instead of the VLAN. But all tutorials use FA0 and when I try to assign an IP address to FA0 it gives me some L2 cannot be assigned or something... :/ And I am also confused at what address IP use for WAN.

  I connected the cable between the Modem and the LAN of the PC port and copied some IP addresses which I think I have to use to configure the router for internet connection. And here they are:

  ISP IP: 76.114.54.255

  SUBNET: 255.255.248.0

  GATEWAY: 76.114.48.1

  DHCP: 69.252.97.4

  DNS: 75.75.75.75

  75.75.76.76

  If you can, please help! Thank you!

  Hi david,

  Looks like your 871w can not get a dynamic IP address: % unknown DHCP problem... No possible allocation

  you could ask your ISP to perform a reset/clear MAC add and try again?

  also, kindly post lastest "show run".

  Edit: just to see you've updated your screenshot. could you add command under 4

  Mac-add 0001.4af9.8b83

• the white lines (with the key that don't meet pluse) comes and goes randomly

  Hello

  I have iphone 6 more.

  Sometimes vertical Whitelines light 1/random th of screen from the top.

  During this time they display, touchscreen doesn't work sometimes and sometimes it works out gibberish.

  I press somewhere else and something else is pressed.

  Then all of a sudden this problem disappears until I use the phone. (no whitelines or touch that do not meet, everything becomes perfect)

  Once I have it put to sleep or leave for some time the problem will come still sometimes.

  This isn't software issue since I reinstalled 9.2.1 ios again and again with full reset. (deleted all my apps just to be sure)

  There is no hardware failure, because the problem is not persistent and works of my screen and touch all the other times. I think that cables or the connection is loose. given that this problem comes and goes randomly. I can live with that, but its * boring. A sec I talk to someone and I can't cut the call.

  Please help me, Service Center said that I need to replace my phone. They will not understand this and I want to just replace it without reason.

  Tip: I live in India where these people are not able to diagnose even the question and want me to pay for something, I clearly did not cause.

  And since my warranty is out, I have to pay appx ~ $ 470 for a problem that no one can tell me and search the Internet or apply basic logic is simply because cable is at fault.

  Again, there is no hardware or software defect. Its a few wiring loose and noone at the apple repair center wants to diagnose what it is.

  All they want to do is replace the * phone without reason.

  I'm sorry, but the loose wiring is a hardware problem. Since there is no authorized Apple service provider who manage the repairs of the screen, their only alternative is one out of warranty replacement of the device, given that your warranty has expired. To be honest, even here in the United States, if Apple tries to replace the screen and it will not fix the problem, their answer would be the same, a replacement of the officer of the WATCH. They do no wiring at the Genius Bars. Your response is more disabled because of your location. You can see if there is a 3rd party competent repair facility that can run on the device. This decision is yours.

• How can I optimize my Internet settings for BSNL (Bharat Sanchar Nigam Limited), the Indian Government Internet service provider and make sure at the same time?

  I would like to know how to optimize my Internet settings for the Indian Government Internet service provider and have a safe browsing experience.
  Hello
   
  How to optimize Internet Explorer: http://support.microsoft.com/kb/936213
   
  Hope you will find many answers to your questions in this article: http://windows.microsoft.com/en-US/windows-vista/Why-is-my-Internet-connection-so-slow
   
  To secure your internet connection, install a security software on the computer.
  Introduction to security and computer security: http://windows.microsoft.com/en-us/windows7/Understanding-security-and-safe-computing
   
  Many internet settings are controlled by the Internet (ISP) Service provider. Therefore, more support on that, you can get in contact with the service provider at any time.
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.