Wireless configuration of HP C4780 with new router and Mac (wireless network not found)

Similar Questions

• I have a new router and the printer does not work. I have the hp photosmart c4795 all-in-one.

  What should I do to get the router to recognize the new router

  It's working now. I deleted my printer, downloaded the software from HP and added the new printer. Followed the instructions and it is running. Thank you

• No wireless networks not found on laptop - the WiFi windows service does not work on this computer

  Hello

  I have a laptop model Toshiba P205-56347 running Vista home premium and a lynksis WRT54G V8 router model.  The WLAN light is solid and the internet light flashes on the Linksys.  I have Comcast cable as my ISP.

  I've seen reported similar problems.  All of a sudden my wirless acess stopped working, some networks are displayed and I get the message 'windows wireless service does not work on the computer.  I am not able to restart the windows wireless.  I can't connect to the internet on the laptop.  I have a DELL PC and can access the internet here if necessary.

  In the network and Discovery Center, I see that network discovery is disabled.  I can't set it to on.

  Under system devices, I have the following network cards: Intel (r) Wireless WiFi Link 4965AGN and Realtek RTL8101 Family PCI - E Fast Ethernet NIC (NDIS6.0).

  Help, please.  I'd appreciate any help.  I need a good starting point for resolution and wouldn't start using suggestions that corrects other issues.  I design financial systems and purchase online, but I'm not a technical person with regard to updates Vista, drivers, etc..

  Thank you! After reviewing the responses to similar problems, can anyone suggest if I should try one of the following values: 1. run SCF/scannow at the command prompt I don't know what that's going to fix it and do not want to make the current problem worse. 2. download the driver for the network drivers. If you would be grateful if someone could help me find the driver and download it. 3 reinstall Windows Vista Home Premium SP1 since the restoration of Toshiba CD I would appreciate greatly any information. Donna

  Hi blondswede,

  You can try running sfc/scannow to see if you have corrupted files. That won't be a further problem on your pc. After that, you want to make sure you have the latest drivers for your laptop, especially drivers of the NIC (network card). Go to the following link to Toshiba for your model and download those:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=SB&OS=&category=&MOID=1757721&RPN=PSPB3U&modelFilter=P205-S6347&selCategory=3&selFamily=1073768663

  If you're still having problems, and it has recently emerged as a problem, you can try to restore your system to a point in time before the problem started to use the system restore. Here are the steps to follow:

  • 1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
    2. In the System Restore dialog box, click on choose a different restore point and then click Next.
    3. In the list of restore points, click a restore point created before you started having the problem, and then click Next.
    4. Click Finish.

    The System Restore tool

    If the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

    To restore the operating system to an earlier point in time, follow these steps:

    The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Let us know how it works and if you need additional assistance.

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to get online with new router-"Local access".

  Original title: can't get online with new router.

  I'm having a lot of trouble to get online with my laptop.

  My roommate has recently got a new EE Brightbox. It works perfectly well with his laptop and mobile phone. Also works with my mobile phone. However, when I try to use my laptop it only gives me "Local access". I have no problem connecting to the router, but it just won't let me go online.

  Tried to disconnect/reconnect the connection Wireless on laptop from scratch with wired connection to router, router and router reset re-booting. None of them have worked.

  Any help would be great?

  Laptop works on Vista.

  Hi Rob,

  Thanks for the reply.

  Have you tried methods of resolution of the problems mentioned in the previous answer?

  Please update the State of the question, we are here for you help!

• I have a new router and the computer windows 7 If using WAP wireless encriptación. I also want to use my old laptop which has XP then does not connect.

  I have a new router and the computer windows 7 If using WAP wireless encriptación. I also want to use my old laptop which has XP then does not connect. I was told by the router (Belkin) manufacturer support there is a MS download XP patch so it will connect to my new wireless network. Where can I get it and what it is labeled?

  original title: wap encriptación

  Hello

  Maybe this can help.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=3914

• Could get a new router block printing? We had a lot of problems with the computer in the last week and a half. Bought new router and now the printer does not print. :-(

  (1) we went to DirecTV. Then the same day, our internet computer is down. I asked our current provider, Suddenlink, to let them know we had them to another - but we wanted to keep for the internet.

  (2) called DirecTV to investigate why our internet went down at the same time they installed? They said that they did nothing to cause that. We waited 5 days to make out and also install the third TV that was promised. The second tech gave things a lookover and said, once again, that there is nothing unusual during their passage to cause the problem.

  (3) called Suddenlink. They said it was the router. Called the people of Netgear. They said that the router was too old. We needed to pay an exorbitant sum for support and when I told him I'd rather just buy a new router and get free technical support for 90 days... and I personally do not have the credit cards in that time. (it's my mother s equip and I wonder it for the computer) when the guy told me that he could help and hung up on us, even though I was pleading for him to wait until I put my mother on the phone. (I'm in my 40s... not a kid).

  (4) Suddenlink called a few days later, when we got a new router (netgear brand NO!) Installed and I noticed that the 'ready' light was not 'on' on the modem. Their technology has said that he would check and call us in a few minutes. He did not.

  (5) the next day I called Suddenlink AGAIN. This time, I got a really nice customer service agent. She said she would send someone to check on it. It turns out that they had disconnected when I had called to pass only the TV.

  (6) in any case, we are finally online... only now... I can't the printer to work. :-(  This has worked before.  Could it be caused by the different router? I don't know about these things. I didn't even know what it was until someone at Radio Shack has explained to me. (I was not about to buy one at Wal-Mart - these poor people). The printer is a Canon Pixma MX340. We love him. The only thing is that it is difficult to clear the tasks or to reset. The only way to really do that is to simply pull the plug, unfortunately and restart the computer. But hey, it's a great printer, better than HP.

  We are under vista. The router is a Linksys wifi (which we have) N300 model E900.

  Of course I appreciate any help you can give. God bless you!

  Michelle and Ruth.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand that you are facing problems with the printer in Windows Vista.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  Please follow the steps in the link.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

• I just installed a new router and now my desktop running Windows XP computer does not connect to the internet.

  Hello

  I just installed a new router and now my desktop running xp computer does not connect to the internet. I know that it is not the router because I plugged the cable into my laptop running 7 and it works fine. When I try to dhcp I get 169..., when I put manually the IP just get no access to the internet and can not ping to the router address. I tried to run the net work Assistant, emptied my dns, disabled all firewals, still nothing.
  Any suggestions?
  original title: connectivity Limeted

  The zero configuration utility works very well. But it is a desktop computer and on cable. All other wired and wireless PC in the office is working well, then it's definitely this PC. He came out of nowhere, I install a network printer on the PC but that's all.

  Your messages are a bit terse, but if I understand correctly

  • You have a router connected to the Internet and multiple computers connected to the router, some Ethernet cable and others by wireless.
  • All but one of these computers can reach successfully from the Internet via the router.
  • A computer that can't browse the Internet is connected to the router via an Ethernet cable.
  • You disconnected the cable between the router and the desktop problem and connected it to a Windows 7 laptop and the laptop connected to the Internet via the router.
  • You haven't seen any error message (except, perhaps, a message on "Limited or no connectivity").
  • You have installed Windows XP Service Pack 3 (or at least Service Pack 2)

  Assuming that all the foregoing is an accurate summary of the situation, I suggest that you do the following:

  Open a command prompt window (start > run > cmd > OK)
  Type the following lines and press ENTER after each line

  Netsh reset winsock catalog
  netsh int ip reset c:\resetlog.txt

  Close the command prompt window and restart the computer.

• My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  A variety of phenomena can affect the performance of its wireless network. You may be able to mitigate some negative effects.

  Solutions to any factors that may have an impact on your wireless network, read use the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support.

• I have a new router and can not print?

  I have a new router and now you can't print from your device? No worries, there are a few suggestion you could do to solve this problem.

  The main step that you need to do is reconnect the printer to the network. Most printers have the SCW wireless on the front/touch panel. The same way you put in place previously, follow the same steps.

  After connecting the printer to the network, the computer will still have the old IP address and connections. So if you try to print something, it will send it to the old ports.

  UPDATE THE IP ADDRESS

  Find the IP address of the printer in the network wireless summary

  1. go to the computer

  2. click on Start Menu

  3 choose all PROGRAMS

  4. choose the HP folder

  5 Select your printer

  6. Select IP ADDRESS UPDATE

  Type the IP address on the printer.

  This will update all ports and communication between the printer and the computer.

  Another suggestion after you have reconnected the printer to the network (router), is to uninstall the software and re - install the software and drivers. Sometimes it is confusing for people to go through all programming to update the IP address and look on the printer. So it would be easy to uninstall and reinstall another step.

  Hope this helps, thanks.

• Unable to connect after you change a new router and created a homegroup

  I myself locked up on one of my two computers while changing to a new router and creating a home group.  I apply my finger to fingerprint logon and I get a checkmark succeed.  After that the screen changes and it asks for a password.  I have a password for this unit, Dell XPS M1530, but it failed, I tried the password to the new host group and it failed.  The only thing on the screen after that failure is a bit and that is; "XPSM1530 index password".  Below, please sse list attempts;

  Fingerprints succeeded

  Original password of my journal, has no

  Password assigned to group living unit by me, has no

  Don't have a password for collective housing by the software,

  I even tried the password of the router, doesn't have to

  Should I call to Microsoft @ $99 per event or Dell $$?  It is not unclear to me as to who I should contact.  If anyone out there not a remedy which the company should I go to?

  Harry

  Software Windows 7

  Original title: lockout

  Thanks, I used the disk and it worked, I don't know why, but he did.  I have to find a way to remove the need for a password.  The computer never leaves the House and I have insurance to cover.  I found what I believe is the removal of password, but I think it's to administer it, me!  Kinda got cold feet.

  H'

• 'Detected wireless networks' followed by 'no wireless networks were found in range ".

  Trying to help a friend with their laptop!  It's a Lenovo R61i laptop model A 8932, 54, around the age of 16 months.  WIN/XP SP3 is the only OS.  He was working on this wireless network until they are gone on vacation and tried to connect to public wireless networks! Their daughter portable computer continues to operate properly with this wireless network, and it also shows the neighborhood wireless networks as well.  The R61i has a built-in 'Pro\wireless Intel 3945ABG Network ' wireless wireless adapter.

  Connectivity and internet access works very well through the ethernet port.

  Here's what I've done so far:

  He has Norton AV.  I made sure that it was up to date and then ran a full system scan.  It was clean.

  Any help will be appreciated, and I WILL ANSWER about the results!

  Windows Update ran (after I got it work - see below) for all critical updates.

  Fact a "repair" on the wireless connection with these results:

  • Wireless networks detected
  • No wireless networks were found in range
  • Windows could not finish repairing the problem because it is impossible to perform the following action: connect to the wireless network

  That when the laptop is 5 feet of the wireless router.  It is a Dlink
  Updated the driver from Lenovo web site by the support of the Intel boards:

  • former pilot was 11.1.1.11
  • new driver is 12.4.0.21 with a date of 04/03/2009

  Went into the BIOS and reset the BIOS to its original, saved and reloaded settings.

  Checked the Device Manager.  Everything looks OK, no yellow or red devices

  Remove the network card and let Windows re - create.

  Disabled and enabled the network card

  Check the event logs.  The only entrance is on the system log.  I don't know if this event log entry is significant or not, but it's here:

  Source: NETw5x32, zero category, event 7036.
  The service entered the \DEVICE\{78E5EBB6-A194-4E9F-A840-E05CC39A5823} State.

  0000: 00 00 08 00 02 00 62 00
  0008: 00 00 00 00 7 c 00 40 1 b
  0010: 00 00 00 00 00 00 00 00
  0018: 00 00 00 00 00 00 00 00
  0020: 00 00 00 00 00 00 00 00
  0028: 57 44 52 56 00 00 00 e7

  I have not yet tried it raise in "Safe Mode with networking".

  I would add that "Windows Update" was also not working. Graduation: A few updates have not been installed.  Error code 0 x 41. I had going in downloading and installing the latest version of Windows Installer 3.1, version 3.1.4001.5512

  Do not think that there is a relationship between these two issues, but stranger things have happened.

  The laptop has a 3-year extended warranty and I'm about to throw it in the face of Lenovo as a hardware error.  The thing that blows my mind is 'Detected wireless networks' followed by 'no wireless networks were found in range ".

  Hi Shawn

  Thank you for your help.  Here is the final solution to this problem.

  The "clean boot" you suggested worked as described, but it had no effect of awareness of wireless networks.  Ditto to start in "Safe Mode with network.  We took the laptop to Office Depot; They basically ran the same tests that I did, with the same results.  Their technology has managed to get it to connect to Wireless store by manually setting, but it would not show under 'view available networks '.  He suggested that we call their 800 support number.  The only novelty with that phone support guy came was to "Ping 127.0.0.1" which I don't think inherent in the wireless somehow.  He wanted me to call Comcast to check the internet connection.  Under the principle of "do not create a new problem while you're working on a problem", I resisted to go here as two other computers work fine on this connection from Comcast.

  We finally opted for a full charge of Windows.  This included a blue key on the laptop at boot to bring up "Rescue and recovery", then by specifying 'Restore my hard drive to the original factory condition' and "don't save all files" - we have previously saved the contents of "My Documents" on a USB key.  This charge really don't take as much time as I thought he might; only about an hour.  Most importantly - WIRELESS NETWORKS APPEAR NOW; and connect as it should!  We had to apply SP3 as reloading he brought back to SP2 status.

  I guess the lesson here is that sometimes he just reload Windows is the shortest possible solution to some of these mysterious problems.

  I had a hard time to convince me it was a hardware problem, when the system detects wireless networks but are simply not them!

  Thanks again for your help.

  Bruce Butler (np560)

• Backup failed with error 18: the backup drive is not found

  Hello

  My guard time capsule saying "Backup failed" for a few days and I cannot access the old backup files either (when I enter my time machine it shows 'today', which is kind of scary, although I know that my old files is still there). I tried many ways to trouble shoot this problem, but none of this has worked. In my opinion, it's more a network problem and I made sure I connect Wi - Fi even my time capsule created.

  So far I have tried:

  -Delete the files from my internet (com.apple.airport.preferences.plist; preferences.plist and NetworkInterfaces.plist, etc.) and restart my mac

  -Remove TimeMachine.plist and restart my mac

  -Hard reset of my time capsule. Went through all configurations with success but then still backup missed (I hear the running time capsule when it is by train).

  I share this time capsule with my wife and she has no problem with that.

  I can only think of a possible alternation I did which could cause this problem.

  Because of unstable WiFi problem, I had deleted

  com Apple.Airport.Preferences.plist

  com.Apple.Network.identification.plist

  NetworkInterfaces.plist

  Preferences.plist

  or other files and reboot my mac * before * I had this problem with time capsule.

  However, this is not the first time I do it, and it wasn't a problem before...

  This could be the reason? If so, how to restore the network settings?

  Please help me with this problem. Really appreciate!

  Ted

  Here is a copy of the Console:

  24/02/16 2:44:19.308 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:44:19.309 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)

  24/02/16 2:44:19.313 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:44:35.326 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: error - 35 during the resolution of the backup destination alias

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data

  24/02/16 2:45:30.668 AM com.apple.backupd [857]: destination network mounted at the mounting point: / Volumes/data using URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data

  24/02/16 2:45:50.428 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:45:50.428 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:45:59.981 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:46:42.807 AM com.apple.backupd [857]: Timed out while solving Hello destination: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:46:42.812 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:46:42.814 AM com.apple.backupd [857]: the airport of Destination Flymi Time Capsule could not be found (url: afp://Ted%20Ling;) AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. (/ data destinationID: B2187361-58BC-4D33-A7AC-1DDC429ABF3B)

  24/02/16 2:46:42.825 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:46:42.833 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:46:50.544 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:46:50.604 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:47:16.683 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:47:16.683 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:48:20.566 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:48:44.360 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:48:44.360 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:49:48.014 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:50:11.885 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:50:11.885 AM com.apple.backupd [857]: give up after 3 attempts.

  24/02/16 2:50:11.903 AM com.apple.backupd [857]: backup failed with error 21:21

  24/02/16 2:50:27.245 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:50:27.250 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:50:27.250 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)

  24/02/16 2:50:27.257 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:52:28.390 AM SystemUIServer [265]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc

  24/02/16 2:52:28.390 AM com.apple.prefs.backup.remoteservice [866]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc

  What model is the TC?

  Try to force the connection to 2.4 ghz using different names for the various bands... or even better to use ethernet.

  (You may need to buy love at first sight for adapter Ethernet... is an investment worth considering how unreliable wireless).

  Also give me some screenshots of the TC installing airport utility.

  Can you get it in the Finder?

• When he puts an end to Firefox 3.6.6 firefox.exe continues to turn, visible in the Manager of tasks (XP) and stimulates the activity of the CPU up to 60% with the danger of overheating. Have not found an appropriate response with the search term "abnormal

  When he puts an end to Firefox 3.6.6 firefox.exe continues to turn, visible in the Manager of tasks (XP) and stimulates the activity of the CPU up to 60% with the danger of overheating. Have not found an appropriate response with the search term "abnormal termination of the program."

  This has happened

  A few times a week

  is after update of Firefox 3.6.4

  I have the same problem with Firefox 3.6.6 except that it also consumes massive amounts of CPU during the race. This version also adds a new process on your system. I am running XP and in the beginning I tried to disable some plug-ins. Always consumed too much memory. I went back to version 3.6 and the new process went, and the CPU consumption is way down. Something is wrong with the latest version of Firefox, I never saw behave this way. Revert to a previous version (Filehippo) and you will see the difference.

• 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

  13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• I need to reinstall Adobe Acrobat 9 standard on the net, I have a new laptop and the CD does not work

  I need to reinstall Adobe Acrobat 9 standard on the net, I have a new laptop and the CD does not work

  Copy the contents of the cd in a desktop directory.  install from this directory.

  or

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 pro extended exe,7z extended pro 9 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6,7. 5.7.1|  4.4 | 3.6
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".