Wireless connection disappeared after pressing the button system Orange Cisco router WRT54G

Similar Questions

• El Capitan will not install. Window disappears after pressing the button install.

  Hello world

  Looks for some install help. I try to install El Capitan for my Mac Mini. Here are some features:

  Mac Mini (mid-2011)

  OS X Yosemite 10.10.5

  Intel Core i5 2.5 GHz

  Question: El Capitan does not install anything after clicking on the button after choosing the drive. The window simply disappears and nothing happens.

  I have read all the threads to locate the file "install OS X El Capitan", but it leads to the same question.

  What other options can I here? I tried to create a new admin user to install the operating system, restarted my computer, re - download the file, etc..

  I ran out of options here. Help, please!

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Wireless connection disappeared after update wireless connection device

  Hi, I can't connect to any WiFi recently on my computer laptop so I did a little research on the internet and discovered that keep the device wireless to date is one of the solutions. But after I updated it my laptop have a bigger problem, my wireless connection is totally absent. Until it isn't "manage wireless connections" on the left side of the network and sharing Center , but has now disappeared, my "change adapter setting" to have a WiFi connection , but now also disappear. My laptop is Windows 7 and I have attached a screenshot here for your better understanding. I'm not an expert in computers, so please respond in detail as you can, thank you.

  

  

  

  

  

  Thanks PML and GTS-NJ for your good answer. I solved it by downloading the drivers the website of the manufacturer of my laptop's wireless and re - install all drivers wireless.

• Visa read only works after press the button run

  Hi people.

  I have a weird problem here. When I run the vi and press the Start button that the serial port is read and in the rest of the program works very well. When it is finished and do it again there is no data series. I have to give up and re - run, then when I push the button to start the serial data are there. The end of the program is somehow the serial port to an unknown state?

  Thank you

  Select this option.

  You may have found an error in your devices.  and, since you do not have initiallize the shift register with the grouping of the IO Sessions and mistakes the SR will retain the error while the vi is in memory, unless you give up running (how the shift register will contain the default value).  Find the error

• How to close the dialog box after pressing the button

  Hello. I added the button

  ButtonWidget

  (

  kButtonWidgetID,

  kSysButtonPMRsrcId,

  kBindNone,

  334, 434, 16, 16 + 24,

  kTrue, kTrue,

  kButtonLabelKey,

  ),

  and in my method in the file... Observer.cpp

  If (theChange is kTrueStateMessage)

  If (theSelectedWidget is kButtonWidgetID)

  This I want close dialogue

  How? I don't want to create CancelButtonWidget. It is must be cutom button.

  Try this in your dialogObserver,

  InterfacePtr myParent (this, UseDefaultIID());

  InterfacePtr ((IDialog*) myParent-> QueryParentFor (IID_IDIALOG)); dialog

  If the dialog box (dialogue)-> Close();

• After pressing the button my XP sent me a screen with a long message about how he will start not harnessed. After that, it switches between this page and windows logo screen and no command works.

  This message continues to say that a change in software or hardware may have caused this yet, none has been done.   I had problems with registry and for two weeks failed to update norton antivirus protection after repeated due to the delay of message attempts. This has happened in the two weeks of this current problem. Very reluctant to spend more money on it by taking it to a professional, because it has been a problem since I bought it in 08. Any help will be appreciated.

  This message continues to say that a change in software or hardware may have caused this yet, none has been done.   I had problems with registry and for two weeks failed to update norton antivirus protection after repeated due to the delay of message attempts. This has happened in the two weeks of this current problem. Very reluctant to spend more money on it by taking it to a professional, because it has been a problem since I bought it in 08. Any help will be appreciated.

  Hi Gary. Is the message that you receive "Windows did not start successfully, a recent hardware change might have caused this?

  When you see this message you should be in the Advanced Options menu that is in Safe Mode, Mode safe mode with networking, last known good configuration ect... Using the top and the arrow keys on your keyboard scrolling to the last known good configuration work and then press ENTER. Let the computer ample time to start. If she does not always load windows restarts the computer. When the Advanced menu Options scroll mode safe mode with command prompt and press ENTER. Again, give time for windows to load. Command prompt window once charged will appear. Type or copy and paste the following command, and then press ENTER. Follow the prompts to perform a system restore.

  %SystemRoot%\System32\restore\rstrui.exe > press ENTER after you type or paste the command

• HP DV9700 not start. Farm in seconds after pressing the button walk / stop.

  My HP Pavilion DV9700, who works under Vista, stopped working yesterday.  I never did at the Windows startup screen.  Messages on-screen messages which function key to press for configuration, see starting, etc...   then stops.
  
  It started a day ago. I don't think that windows is the question.

  I tried to hard reboot... blew compressed air into the power supply area... no change.

  Don't know what to try next.

  Thanks in advance for any help you can provide.

  Steve

  Had to take the machine a tech I know.  It was the motherboard.   Thermal paste had disappeared from the excessive heat of the CPU and GPU and the poor ventilation of the machine design.   Costly, preventable and unnecessary repairs... HP was worth investing in better design systemboard for their laptops and notebook computers.

  HP response... your notebook $ 1200 of the scrap and buy another... and they will add the warranty one year.

  They thought that 5-6 years I got my laptop has a long service life of the device.

  I was actually insulted by this response and doubt my next laptop will be HP.

  Thanks to those who have tried to help however.

• How to reset the LED after pressing the stop button?

  Hello

  I use vi of green LED to indicate if the data has been loaded correctly. However, if I run the same labview program several times online, then the Green LED is always on because "value that data has been correctly loaded" crashes it since the previous session. Is it possible to reset all of the screws LED after pressing the button STOP (stop labview program).

  Thank you for the answers.

  Hope this helps:

• HP Color Laserjet 4700n does not print unless you press the button "Refresh" on the printer...

  Hello

  Trying to support a printer down in our Australian Branch, so I can't see the printer, what users say just.  This problem occurs for everyone down in this office (about 20 users).

  It is connect via LAN to everyone and it does not seem printer for everyone until they go up to the printer and press the button "Refresh" on the printer itself.  It's a HP 4700n color jaserjet printer.  I got them to recycle the power on the printer leave unplugged for about 5 minutes and also tried to reset service print spooler on a user's computer and the server, but none of these options helped.  I also tried to remove and time the printer to a computer to users, but that did not help either.

  Any suggestions?

  Thank you!

  Hi, thanks to send additional information.  It really helped.

  The following is taken from the User Guide which can be found here:

  http://h20000.www2.hp.com/bizsupport/TechSupport/CoreRedirect.jsp?redirectReason=DocIndexPDF&prodSeriesId=473038&targetPage=http%3A%2F%2Fbizsupport1.austin.hp.com%2Fbc%2Fdocs%2Fsupport%2FSupportManual%2Fc00366053%2Fc00366053.pdf

  The message that users see is a Media fast charge.

  On Page 198, there is a section on the message they see.  It also includes measures to address the message.

  

  It is likely that the tray is already loaded with media of the letter otherwise, they would get another error after pressing the button to check twice.  However, media guides are very likely out of position and causing the printer to think that the letter is not loaded.

  For step 2 to verify the media guides see page 97: "setting up trays of food.

  When you load paper into tray 2 and have the media guides correctly aligned, after the closing of the tray of the printer, you should see a prompt saying that plain letter was loaded in tray 2.  This prompt is to change the type, size is automatically detected by the tray.  You see a different size than the letter when the tray is closed, which means that the guides are not good position and should be adjusted.

  You can also check which think that the printer is loaded by accessing the paper handling menu as described on page 98.

  Once you have the printer thinking that plain letter is installed in tray 2, the jobs of users requesting letter tray 2 should not more the prompt.

  What happens if you check that the guides are in the right position, but you don't always get a letter in the status bar?  It is an indication that the size of detection does not work correctly.

  Check the guide position tray holder should solve the problem. It may have been moved from its position when the new document has been loaded.  If this does not resolve the problem, please after return.  Let me know the size of the media and type that the printer thinks is in tray 2, the driver that you are using as well as the driver for the work of the user settings.  This will allow me to try additional things at the office.

  (Edited to remove extra lines)

• Press the button

  Hello
  
  is this possible? While am pressing the button.
  
  I want to update the specific numeric field. increment (i.e.) with "1"
  
  in the table. is not show in the UI.
  
  in example: explained:
  
  numeric field: = 201112001 in the table
  
  After pressing the button. Increment 1
  
  now,.
  
  Digital filed: = 201112002
  
  These data must be updated in the table. Note: this change is not displayed in the user interface
  
  can someone help me.
  
  Published by: subu123 on July 18, 2011 04:20

  just set the property of binding to the table... it will ask you to create the ManagedBean... create... has the scope as backingBeanScope or request according to your need.

• Satellite A60 Shuts Down immediately after pressing the Start button / stop

  My A60 stops after 2-3 seconds when I press the power button to open the laptop. After pressing the power button, all the lights on, but until something appears on the screen, the computer cuts the power. Pleasure, DVD and disk hard audio work. At least, the sounds come from these materials. Also from the buttom of laptop, I see that the fan is running.

  This problem started anywhere Yesderday, I closed my laptop properly and carry my laptop to my friends. When I tried to open my laptop, this problem occurred and I could not open yet.

  I tried all combinations of use power supply and battery for power. Non of them works.
  Is there a had the same problem or have any diagonistics for this problem.
  Thank you

  Emrah

  Hello

  Try to connect the laptop to the external monitor to check if pictures or anything else appears on the second monitor?
  You can also try to use the FN + F5 combination to check if the display will change back to the internal display.

  But look, man, if you are not successful then I guess there must be a serious hardware problem and only the laptop technician might know what's wrong.

• Computer to close after pressing the close button in windows

  I had a problem for my computer to shut down after pressing the close button in windows. Windows starts to make the closing process as its suppose there just like the computer is supposed to to close it restarts. Its like I pressed the button instead of the button closure. Please tell me how to solve this problem, so I do not have the power button to get off the computer.

  What has not worked? What happened when you tried?

  Another suggestion, take a look in the system logs and errors and warnings and post here Event Viewer Application copies. Do not post on that more than 48 hours ago.

  You can access event viewer by selecting Start, Control Panel, administrative tools, and Event Viewer. When searching for the meaning of the error, information about the event ID, Source and Description are important.

  A tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. You will see a button resembling two pages. Click on the button and close Event Viewer. This places a copy of the report to your Clipboard. Paste it into the body of your message. Make sure that it is the first dough right out of the event viewer.

  Hope this helps, Gerry Cornell

• my laptop stops automatically and randomly and start again after pressing the power button / stop

  Hello

  my laptop stops automatically and randomly and restarts after pressing power button.my pc running windows 8 version of system.can you please solve this problem.

  Hello

  Check if the quick start option is enabled, your laptop. Here are the steps:

  1. open the Power Options window. Use one of the following methods:

  A. press the WIN + R keys at the same time to launch the Run dialog box. After that, type powercfg.cpl , and then press enter.

  B. press the WIN + X keys at the same time to launch WIN + X Menu. After that, select Power Options.

  C. the Start screen and the Windows of type power will show the results, select the Power Options.

  2. click on settings , then choose change how the power buttons.

  3. scroll down and look for turn the (recommended) quick start under stop settings.

  4 uncheck the checkbox, and then click save changes.

  Note: if the option has said isn't here, scroll down and select change settings that are currently unavailable to change.

  5 restart your laptop.

  Let us know how it goes.

• How can you cancel the download of an update that was started by after having pressed the button "Check for Updates" in the window "On Firefox", please?

  How can you cancel the download of an update that was started by after having pressed the button "Check for Updates" in the window "On Firefox", please? If possible, please cover all platforms, Mac, Windows, Linux, although the first mentioned is what currently applies to my situation.

  Thank you.

  Such a download is usually recorded in a updates or updates folder in the program folder or the Firefox application.
  You can delete this folder to cancel the download.

  If the files have already been downloaded, then delete the files in the folder updates\0 and updates.

  • http://KB.mozillazine.org/Updates_reported_when_running_newest_version
  • http://KB.mozillazine.org/Software_Update

  Mac: /Applications/Firefox.app/updates "/path_to/Firefox.app/Updated.app"
  Linux: "/path_to/firefox/updated"
  Windows: C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
  

• I have dell laptop studio - my wireless connection disappeared, I can always connect to the internet via etherrnet... Caddy

  my wireless connection disappeared

  Hi williamgriffith

  
  1. what happens when you try to connect?
  2. do you receive any error messages?

  
  You can check if the steps provided in the below assist items you identify and solve the problem.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks
  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-low-wireless-signal-quality-problems

  I hope this helps.