Wireless connection dropping on the Satellite C660-195

Similar Questions

• Re: Satellite Pro A300-1EA - wireless connection, drop all the time

  Hi, I have a problem with my wireless connection fall all the time on my Satellite Pro A300 1EA.

  It happened earlier, but I've fiddled about a little with change of drivers and the removal of the connection settings for the registry and it then worked fine for months, until yesterday.

  There were several updates for Windows installed yesterday, but none of them have been updated driver for the wireless card, and they don't look like they should cause problems. The fact that the problem happened before makes me think that the updates can be anything to do with it.

  I use the * Intel PRO/Wireless 3945/4965/5100/5300 * for Vista 32 - bit version 12.2.0.11.3 drivers from the Toshiba download page.

  Other computers on the same access point have no problem, so I think it is specific to this laptop. The connection speed is normally 6 Mbps, but I cannot even check e-mail now without the abandonment of the connection.

  Laptop will be thrown against a wall soon if no one can help you.

  Thanks in advance.

  Edit: I've already made sure power settings are at maximum to the WLAN card, even if on battery, or what power management.

  Post edited by: mjbcrawf

  Hello

  Have you tried to use the Windows System Restore feature? After that your WLAN should work fine again.

  In addition, I can recommend the latest WLAN driver in the Intel page, it s version 12.4.xxxx. I installed the driver on my Qosmio laptop and don t have any problems with it: [www.intel.com].

  If you have any other questions, please let us know!

• Connection problem with the satellite C660 - 24L

  Hello world

  I have a Toshiba satellite c660 - 24L running windows 7 and have had a problem with internet connection in the last two days.

  Marketing, the internet works very well for around a minute and then I lose the connection. The computer says still connected but the network map displays a problem between the computer and the Wi - Fi router. After that restart the internet works fine again, and then disconnects after ~ 1 min.

  A few times, the computer froze, and gave me a blue screen and memory dump, and then a forced restart.

  Computer behaving the same way when connected and disconnected from the mains.

  All other devices will connect to the router talk-talk with no problems.

  Any help is appreciated, thank you in advance.

  Lewis.

  Post edited by: lewlew

  Have you noticed a few problems if you use the local network connection?
  Original Toshiba WLAN driver is pre-installed on your computer?

  To be honest, it is not easy to say why this show is starting to happen so suddenly.
  Try to back up OS to an earlier time using System Restore tool just to see if the problem will still be there.

• Satellite C660-195 - wireless turns off

  I have a Satellite C660-195, I've had an ongoing problem since the day I bought it and when I connect it to the network, it loses the connection to the internet. The wireless function will switch off completely.

  Can someone advise the best course of action?

  I put t know what WLan driver version you are using and I don t know what BIOS is preinstalled on your laptop, so I recommend you update the BIOS. Then download the latest driver for WiFi (Realtek RTL8188CE) for this device and update it.

  City of BIOS and WLan driver can be downloaded here:
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?service=EU

• Windows 7 does not start on the new Satellite C660-195

  Hello

  I just bought a Toshiba Satellite C660-195 with Windows 7 pre-installed.

  This morning I turned on it and it came with a black box with x:windows\system32\drvload.exe in it. This box then disappeared and Startup Repair kicked. He then told me that Startup Repair cannot repair this computer automatically. The notice were to remove any device that had recently been attached to the laptop (such as a webcam or music device) but I did not install a hardware or devices. I clicked finish and stop you the laptop.

  I lit it again and it's the same thing (new!)

  A forum would suggest trying the following: click on the link 'Show advanced options of the system and support recovery' who asked me to choose the configuration of my keyboard, but then when I do & click then it tells me "you must register to access system recovery options" I am never given the option connect!

  When using the F8 advanced boot options I'm still not able to solve this problem. The same thing (see above) that happens when I try to start in all security modes, last good known Configuration (Advanced), debug mode, start Windows normally etc. I don't understand it.

  Looking for other forums, they suggested dΘplaτant zero while running and then one selects Windows 7 to restore the laptop to its factory settings, but the same thing happens - it shows just the black screen with x:windows\system32\drvload.exe launched then startup repair, that does not solve the problem.

  I don't have a disc of windows 7 to restore since I only bought the laptop 6 days ago and didn't have time to do a still. In addition, the laptop must have the restoration on his hard drive, but I can't access it to restore windows.

  I'm just a home user understand all technical talk. Please can someone help me?

  Hello

  Sorry to hear you I have this problem. The fact is that the new laptops come with only HARD drive recovery image and not with recovery DVDs. What you can try now is to install the recovery image using HARD drive recovery facility.
  If this works you need out of the box again.

  Please do it following the instructions in this document - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  Please send us comments.

• Upgrade of RAM up to 8 GB on the Satellite C660-180

  Hey guys,.

  Thanks a lot for taking a peek at my post.
  I have the Satellite C660-108. I think the upgrade to 3 GB up to 8 GB ram.
  I'll be very grateful if someone could answer my questions before making a purchase.

  It is a model of Ram. I think of buying.

  Kingston HyperX Plug and Play DDR3 1600 MHz CL9 8GB SODIMM Memory Module

  I wonder if it would correspond to my laptop?

  Also, I found this on C660-108

  Type: Intel® Graphics Media Accelerator HD
  amount of memory: 1 273 MB shared memory with 3 GB of installed system memory and up to 1 696 MB with 4 GB of system memory, (with system of 64-bit pre-installed operating)
  memory type: shared.

  If I update up to 8 GB ram it would mean my graphics system memory will be up 3 392 MB as well?

  Thank you very much.

  Kit

  According to the technical page of Toshiba laptop, 8 GB of RAM (2 x 4 GB) are certainly possible.
  Kingston is a good manufacturer of RAM and provide good quality modules.

  The RAM modules should support the following sepcs:
  DDR3 1066 MHz (PC3-8500)

  Processor PENTIUM P6100 (2.00 GHZ) supports a 1,066 MHZ FSB and therefore the PC3-8500 must operate at full speed 1066 MHz

  > f I upgrade ram to 8 GB it would mean my graphics system memory will be up 3 392 MB as well?
  More RAM means more can be shared with the GPU, but this is controlled by the graphics driver automatically.

• Modeling 3D (Sketch Up) programs keep crashing on the Satellite C660 - 28 d

  Hi guys,.

  Obtained the Satellite C660 - 28 d to Christmas as my old laptop was dying on its feet. So far I've had no problems with it, except for when you use a selection of programs, namely Sketch Up and the rhinoceros are two 3D modeling programs. Strangely enough, AutoCAD Revit works great, I have imagined would have been more demanding on the system.

  When Rhino opening he allows me to choose my model before crashing and displaying a message saying "Rhino 4.0 has encountered a problem and needs to close" and with Sketch Up I get again select a model but then a message saying "Google SketchUp has produced a bug splat and needs to close" followed by a similar error report form that never works when I try and send the error. This is happening on SketchUp 8, after having uninstalled and reinstalled SketchUp 8 and then uninstall and install SketchUp 7, all with the same result.

  It has been suggested to me that there is an error with the graphics card and I have to download a driver, but the only driver on the Toshiba site that would make sense to me is the display driver, I have installed and makes no difference.

  Please help me, I need the use of these types of programs for the University.

  Hello

  It is possible to have these problems because of display driver.
  You should maybe contact the software manufacturer and ask for help. Toshiba doesn't third party software support. Software maker has better experience with own product. I presume that what they have tested on different platforms and need to know what can be the problem.

• For the Satellite C660-A219 function keys do not appear

  For the Satellite C660-A219 function keys do not appear... I formatted my laptop and installed a new Win 7 after that I lost... function keys. Please help

  Have you installed version of Win7 or recovery image original Toshiba that you got with your Toshi?
  Did you install additional package from Toshiba?

• How can I disable tap-to-click on the Satellite C660/C660D?

  There is no option to disable it on this laptop, I looked for the answer online but nothing, there seems to be no way to do it on this laptop model. I tried to download the new driver for touchpad of the site but had absolutely no effect and gave me more options to turn it off, it has changed nothing. Now completely stuck and its driving me crazy!

  The mouse click also on its own randomly even if Im not to touch, always seems to hurt when im game.

  I still want to use the touch pad to move the pointer autour, just don't want to use it to click.

  As far as I know the Satellite C660 supports Synaptics touchpad.
  The Synaptics touchpad driver should support the tap to click option.

  In order to ensure that Synaptics driver has been installed.
  Then go to control panel-> mouse-> last tab (button settings)
  Now, you need to access the properties of Synaptics and here you should find the option called tapping

  

• Installed wireless Belkin, unable to see network, get error windows cannot configure this wireless connection and starting the WZC abuse

  Hello

  I have a belkin wireless router that worked on my primary computer and a portable computer for years.

  Recently, I moved my main computer and now it dosnt seem to work. Belkin is installed but when I ask to see available networks, it says that windows cannot configure this wireless connection and starting the WZC abuse. Belkin still works fine on my laptop so I know no there is not a problem here. Can someone help me please? I tried to type in %SystemRoot%\system32\services.mcs\s as with a question of people, but all I get is windows can't find this.

  Any ideas please?

  Thank you

  * original title - Help... problem with belkin wireless *.

  Let's see if I can cut through it.

  You wrote:

  Click the Wireless Networks (see this picture) - I did

  Is the box 'Use Windows to configure my wireless network' checked or unchecked? There is no such box.

  I connect using - he says belkin. another box saying this connection uses the following items. then underneath there are 3 tabs - install, uninstall and properties. If I press on properties it says name provider and in this box, it says windows index.

  It seems that you don't have not clicked the "Wireless networks" tab, after you open the properties of your wireless adapter.  From your description, you look at the 'Général' tab: click HERE to see the "Général" tab Click HERE to see the 'Wireless Networks' tab.

  There are 5 columns: name, description, status, startup type and log as.  The values for the last 3 columns should be started, automatic and Local System - on my screen there are 4 tabs at the top - general, connect you, recovery and dependency.

  You skipped a step... 5 columns are in the 'Services' window initial... you arrive at "4 tabs at the top", AFTER you double-click the Wireless Auto Configuration.

  Status of the service which includes 4 boxes. stop suspend and resume. the button highlighted in the start menu

  Just to the right of the expression "Service status", you should see a Word.  On your system, this word probably is "stopped."  The 4 buttons (boxes) are how to control the service.  Because you said that the highlighted button is 'start' which means that the service is currently stopped, and you will need to click on this button "start" to start.

  I strongly suspect that you had used the Belkin utility to control your adapter - and now, you also started WZC.  As I wrote above, you can have both running at the same time.

  When you click the icon of your "Belkin", do you have a screen that looks like this: http://www.wi-fiplanet.com/img/2006/belkinn1/08.jpg

  If so, you should return to the utility Services and 'Stop' the automatic configuration service.  If you want to use WZC instead of the Belkin utility, see http://en-us-support.belkin.com/app/answers/detail/a_id/40/related/1

  I'm not familiar with the Belkin Wireless networking utility, but many wifi manufacturer utilities can be used to turn your wifi on and off, then maybe your was off (the adapter on your computer - not the router).  If you identify the model of the card you have in your main computer, I'll see if I can find the manual on the Belkin website and maybe give you a little more information.

• I can't get the wireless connection appears on the list__ of 'network connections '.

  Only, I had to reformat my Latitude D31 and don't know how to do the wireless network connection appears on the list of network connections.  The without line is turned on and the router works.

  On a relative (sort of) topic, before reformat, I got a blue screen that says since more memory was used that was installed, there was no memory for something else.  The computer is running (I reinstalled Windows XP, but in Setup the message still arrives.  Is this normal?

  Hello

  Old laptops use to come with very little memory.  Since then, software exceed the amount of memory installed

  Check the amount of memory you have and see if you can upgrade.

  You can find and expanded manual on Dell' support for the laptop.

  Regarding the wireless.

  It is possible that the wireless card is not operational and need to reinstall drivers.

  Maybe this can help.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  -Jack MVP-networking. EZLAN.NET

• Re: Satellite P850 138: Wireless connection drops

  Hello

  I'm having the following problem:

  Sometimes the WiFi on my P850 138 will drop and the symbol beside the clock network connection displays an exclamation point.
  To solve the problem, I have to open my wireless network connection and disconnect and reconnect to my router manually.

  My P850 138 is connected to the internet via a connection from WPA2-PSK with a BT Home Hub 3.
  Note: The connection to the router is actually not lost, just connect to the internet.
  Also, the router remains connected to the internet.

  I would really appreciate some advice.

  Thanks in advance!

  > In order to solve the problem, I have to open my wireless network connection and disconnect and reconnect to my router manually.

  From my point of view this is not question of portable but a router problem.
  Have you tried to connect the laptop to another wifi hotspot in your area to test the feature?
  Recommend doing this

  In addition, you can also check if there is updated firmware for Wlan hub.

• Can not see the "wireless connection" option in the drop-down list in 'sharing' under the ics. Trying to establish an ad hoc connection.

  I'm trying to set up an ad-hoc connection between two laptops. I created a network. When I right click and select Properties. On the sharing tab, there is a check box for "allow other users to connect to this network. Below that, there is a drop down menu to "connecting home network." My problem is that I can't "wireless connection" under this sow drop andhence cannot establish a connection. Help, please! Using windows 7 64 bit home premium and have ralink 5390 adapter. I have internet through a wireless internet service provider. I use "Reliance Netconnect + wireless internet".

  Hi Amit,

  Please refer to this link and check if this helps you,

  Set up a computer-to-computer (ad hoc) network:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

• Vista SP2 wireless connection drops

  People, I know this question has been asked before, but I can't find a solution to my problem.  I've had my Dell laptop for about 6 months now and it worked perfectly, without any problem wireless connection.  On Sunday, August 9, I installed Vista SP2.  It updated no problem at all, but once he did his final reboot, it connected to my wireless router for about 5 minutes, then dropped connection.  Now, when you restart it only connects for a minute or two wireless then abandons connection.  I then uninstalled SP2 but it has not solved the problem with wireless.  My wireless adapter is an Atheros AR5007 and drivers are all up to date.

  Anyone know how I can fix this so that my wireless signal stay tuned as he used to pre SP2?
  Thank you.

  Hi KK_14,

  Thank you for visiting Windows Vista Microsoft answers forum.

  Fixing the problems of common networking in Vista:

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:

  http://support.Microsoft.com/kb/299357

  Disable the IP helpdesk:

  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter

  2. scroll down to the IP assistance service, right-click on it and select Properties

  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.

  4. then click on "Stop" to stop the service from running in the current session

  5. click on OK to exit the dialog box

  Disable IPv6:

  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

  NOTE: You should do this for each network connection.

  Disable the DHCP Broadcast Flag:

  Link: http://support.Microsoft.com/default.aspx/KB/928233

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756/ (how to back up and restore the registry in Windows)

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:

  Click Start, type regedit in the search box, and then click regedit in the list programs.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  Locate and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}

  This registry path, click the (GUID) subkey that corresponds to the card network that is connected to the network.

  On the Edit menu, point to new, and then click DWORD (32-bit) value.

  In the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.

  Right-click DhcpConnEnableBcastFlagToggle, then click on modify.

  In the value data box, type 1 and then click OK.

  Close the registry editor.

  By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.

  Please let us know if it helps.

  Thank you and best regards,
  David

• While the Satellite C660 just games close

  Hello

  Recently bought a Toshiba Satellite C660:

  i3, 3gig of Ram, Windows 7 64 bit.

  So, I use this for my small business and it works perfectly, I love it.

  However, last night, I played Football Manager 2011 and during the simulation, part graphic game relatively high, the laptop just closed, completely off, twice. In both cases, the fan was working overtime.

  Should I return it to the place where I bought it?

  > Should I return it to the place where I bought it?
  Why that?
  You can use your laptop for usual work?

  As much as I know C series is not very good for gaming and I can imagine this laptop was simply overloaded and the result is off without warning.