Wireless connection not connected

Similar Questions

• Wireless network not always connects successfully on HP ENVY 5644

  Just bought a new HP ENVY 5644 device to replace an existing of my HP Photosmart C4380. The new device for the first time and ran through the initial configuration using the built-in touch screen. Everything seemed to be going easily and smoothly, without any error and even connected to my home wireless network on the first attempt.

  I then tested the printing and scanning of the characteristics, which each provided extremely pleasant results and good performances on the wireless network.

  Unfortunately, this is where my story ends happy and boredom begins!

  After initially set up the device in a temporary location, I've properly turned off to transfer it to its final resting position. Even if it were in another room of the House, it was actually closer to the router of network wireless itself. In reality, we are talking about a very significant distance that the 2 rooms are in fact back to back each. So, now with her in her new role and connected to a power outlet, I turned on the device once more. The powers of the unit upwards and the blue light that indicates the status of the wireless connection, continually flashes blue rather than a blue fixed solid. Blinking blue indicates that the device is unable to establish a wireless network connection. If I use the touch screen to investigate the matter, I think there seems to be an authentication problem and the details of the message are bad password (WPA) wireless entered.

  Why has this happened? Nothing has changed, everything that I've done is not move the printer in another room!

  Believing that the touch screen tells me, I decided to run the Wireless Setup Wizard once more to confirm the wireless network settings. As expected, he manages to find my home wireless network without any problems and then requests the password key has been entered. I go so it correctly and press on apply. It is at this time that the device tries to connect to the network, that unfortunately crashes, return the above error message. However, I know that I entered the password correctly, in fact, there is an option to display the password that you entered before attempting the connection, which, while they inspected, confirms that the password that I entered is good!

  Then why does it not connect?

  I tried to turn on the wireless feature, turn off several times via the touch screen interface, but this has not solved the problem. The only way to get the connection Wireless online is to keep turning on the unit, switch off again until the wireless light solid blue. Without apparent reason, wireless seems to have a mind of its own, only connected to my wireless network when she wants to!

  I have no problems with many other wireless network devices I have in my house, from several manufacturers and even located in other parts of the House. I know that my wireless network is good and I know that my password wireless like the back of my own hand, so there is no chance of which is incorrect. It is purely a problem for the HP ENVY 5644 itself, device which can be confirmed by the fact that if I turn it on and turn it on again, it could decide to establish a successful connection even if I have nothing to its own network configuration, or my own configuration of wireless itself.

  Ask yourself whether or not it might be of some obscure incompatibility between my wireless router and the HP ENVY 5644, I tested the unit with another router to spare than I, who was also from another manufacturer but unfortunately the result is the same, the HP ENVY 5644 connected only when he wanted and would establish only the network connection Wireless when switching on the device. If the connection fails, it will never connect to the network unless you turn off and turn it back on, which may require even been attempted several times before success. Once connected, it seems to stay connected and then works really well.

  This behavior is not acceptable and I'm sure that's not too healthy for the device itself to be turned on and off again at these short cycles. Otherwise, overall, as I said earlier, I am very happy with the product.

  Can someone at HP tell me why this is happening or suggest what I need to seek or consider.

  Talked with HP engineer the other day. I explained to him what was going on and they suggested to do a factory reset and then set the IP address manually rather than using DHCP from my router wireless home.
  
  I wasn't too happy about it as everything has been well installation and work, except for the WiFi do not reconnect all power over. I also had a go better, adding a DHCP reservation in my router by using the MAC address of the printer. Indeed, it is the best of both worlds that the printer will be given the same IP address by the router whenever he asks for one.
  
  We agreed to leave things as they are rather than the reset of the printer and I would now turn off the printer every day. For the last 4 days, the printer has reconnected to WiFi at all power over. This is excellent news.
  
  I have a call on request with HP in the coming days to discuss how things are going. If everything continues as it is, it would seem that to specify that a wireless router DHCP reservation solves the problem. While I wait for the next call to HP, I continue to power on / off power to the printer on a daily basis.
  
  Watch this space!

• Satellite L300 - 12L is not picking up wireless connection

  I just did a factory restore on a Satellite L300 - 12L sound do not pick up any wireless network.
  Do we know if its material missing?

  Thank you
  Them

  Hello!

  What do you mean with it s not to pick up any wireless connection?
  Can you wireless networks?

  Why wouldn't be a missing material? If your laptop is equipped with a WiFi card (I'm almost sure that this is the case) and you don t have exclamation points yellow in Device Manager that s is not a hardware problem.

  Don t forget WIFI must be enabled with the hardware switch on the computer laptop and FN + F8.

  Good bye

• HP Envy 5640: my new printer is connected wireless but not detected by the computer

  I installed a new printer, but when you try to print, it records in PDF format instead of print. The wireless connection is good and shows the printer as the default printer.  How can I change the settings of the recording to printing?

  You are welcome.

  To enable connected HP support options, click the devices tab.  Touch the icon and enable webservices. If you have already activated webservices, touch "Print information Page."  Claimcode of the printer to add the connected HP printer. Or, if you want, call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I'm sure that the printer you see so-called 'Network' would be wireless. Make the default and try a test print.  If this fails, try the other being default and do another test.  Once remove you the one that is active, right-click on the printer late heading and delete it.  Worst case if that happens again call short number above.

  Have a great weekend,

• My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why.  The deskjet printer shows that there is a wireless connection.

  My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why.  The deskjet printer shows that there is a wireless connection.

  Hi Mpsfeldt,

  Thank you for using communities Support from Apple!

  Your question, it looks like you are only able to use AirPrint sporadically. We know that situations of this kind can be frustrating, but we are here to help.

  To begin the process of solving problems, I suggest you to read about the section If you can not print on your printer AirPrint in the following article.

  On AirPrint - Apple Support

  Best!

• On the Satellite A200-1CR wireless connection is not working properly

  Hello

  I have a problem with my wireless connection. In spite of I stay close to my router I can't access the Internet.
  If I have the connection, it is the level of 1 to 3 (5 is best).
  I have the same problem with "hot spot". I can't access the Internet or use only messenger, can't surf the Internet, check my emails, etc..
  Another person do not have this problem in the same places. They can access the Internet. What's wrong? Can you help me?
  I have a Satellite A200-1CR.

  Piotr

  Hello

  For most Wlan issues are related to problems of compatibility between the wireless network card and the Wlan router.
  Sometimes the Wlan driver allows to obtain the best performance.
  So, try to update the WLan driver first. Maybe it helps.

  Good luck

• Wireless connectivity is not visible on my Satellite A110-162

  Since I use the product recovery CD on my Satellite A110-162 (PSAB6E-OOZOOQEN) I can't get a wireless connection.

  When I go to Control Panel/network connections, it shows the available rigid cable but not wireless connections.
  The orange light is on and have tried Fn + F8 but without success. Doctor of connectivity do not show and wireless.

  Any ideas?

  It is somewhat strange that you can not use the WIFI connection after recovery image installation.
  And how you used it in the past?

  Is the card properly installed wireless (Device Manager)?

• OfficeJet Pro 8600 Plus: loss of wireless connection, printer does not accept the password wireless

  My printer has suddenly lost its wifi connection. It's the only phone connected to my network to do so.

  Through the Wireless Setup Wizard to restore the connection. Assistant tells me that I entered an invalid password wireless, that is not true. (I confirmed that all devices connected to the network using the same password).

  Reset the router (Technicolor of Time Warner). Reset the printer. The 'Restore default network' done. No luck.

  Zero has changed since yesterday, when my printer was working fine. I used the same router for months, do not change any settings. Any thoughts on what may be the issue? A bad update happen?

  Thanks in advance.

  My apologies for the late reply. I managed to get this problem resolved by phone to customer service.

  The security mode of the router had to be changed to 64 WEP for wireless connection to be restored. According to Support HP, it's a common problem with the routers in Technicolor. There was no explanation as to why the printer has suddenly lost the ability to connect wirelessly when safety was created to WPA2-PSK. The network has been configured this way for more than a year.

  I have almost solved this problem on mine (I had read about changing of security in a different post), but ran into a hiccup because of Safari. For some reason, Safari prohibited access to a menu page for my router security settings. You can imagine how boring it is to look at the HP Support use Firefox to access the router and do what a mouse click more, and then I had to make the change. So, if you make this change, be sure not to use Safari to access the gateway of the router Technicolor. Use Chrome or Firefox.

• I can only connect to the network via a wired connection. Wireless does not connect.

  Wireless does not work but internet will work when plugged into router direstly

  Wireless does not work but internet will work when plugged into router direstly I reset my router repeatedly and still will not work.

  Not exactly what OS you use so here are some links to help you get started. If you need assistance with any of these steps please let me know. Thank you.

  http://support.Microsoft.com/kb/870702

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  http://TechNet.Microsoft.com/en-us/network/bb530679

• Officejey 8620e Pro: Officejet Pro 8620 connect wireless but not visible by any other device of

  Printer was fine for 9 months.  That is, Apple devices could print using AirPrint.  Computers laptops MacBook Pro and Windows 8 were also very good.  But now printer is not visible by any device when trying to print / set up a printer.  Finally managed to do work with a USB cable, but it's not practical for all members of the family.  Have you tried:

  Full power reset

  Reset wifi

  Updated drivers

  Recycled all devices that are used to be able to see the printer.

  To confirm, the printer says that it is connected to the wifi & AirPrint and wakes up when the control panel is touched.

  Thanks in advance

  Hello @Insightful_Chap! I'd love to help you with your Pro Officejet 8620.

  I understand your description that the printer is connected to your network, but is no longer visible for your devices. Although the printer is connected, I would allows you to use the following document to solve the problem as it will guide you through the necessary steps: HP Officejet Pro 8610, 8620, 8630, 8640 and 8660 e - all-in - One Printer Series - printer does not maintain the wireless connection.

  Please let me know the results of your efforts and we can go from there.

• Windows xp will not recognize or list the wireless connection.

  Original title: we changed wireless routers and now windows xp will be same not recognize or the same list if wireless connection 3 computers in the House will be

  Under networkconnections the old wireless router, or the other is visible.   I tried toads new link also with no success

  Hello

  1. What is the brand and model of the computer?

  2. who is the provider of Internet (ISP) Service?

   

  Follow these methods.

  Method 1: How to fix wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

   

  Method 2: To create a wireless network, you can follow these steps.

  a. click Start, click run, type ncpa.cpland click OK.

  b. in the window network connections, right click on the wireless network connection icon and then click Properties.

  c. in the wireless network connection properties, click the wireless networks tab. If you do not see a wireless networks tab, your network card can not take over the automatic Wireless Configuration service.

  d. under preferred networks, click the Add button.

  e. in the network name (SSID) box, type the name of the access point, and select the parameters according to your network requirements. This setting will match the configuration of your router or access point. If you have a router or wireless access point, and then select Wireless Ad - hoc mode and use the same network name that matches other computers.

  f. click OK

  g. under available networks, click View wireless networks.

  h. in the wireless network connection dialog box, choose a network by clicking on its name and then click on connect.

  Reference: set up a wireless network

   

   

  For more information, see this article:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=Tab03

• After these recent MS Update, Wireless will not connect XP PRO Dell Inspiron 510 M

  After a recent Update MS, my wireless is not connecting to my home network.

  I've set up as a network secured using WEP.  I checked that the key/password is correct.  He gets in that the acquisition of the IP address, & goes no further.

  I downloaded what I believe to be the latest driver for the Intel Pro/Wireless LAN 2100 3 device has.

  Deleted & reinstalled the device (network connections now watch as Wireless connection 3..)

  MS security Esentials finds no viruses, Defender detects no problem either.

  You b uninstall Norton Security Suite AND THEN (b) download/run the Norton removal tool [1] & restart (c) BEFORE you installed MSE?

  Note: most Windows XP computers came with a Norton or McAfee free trial pre-installed. When you perform a clean installation of Windows XP by using the disks that came with the computer or the hidden restore partition, the free trialware is reinstalled (but invalid). You MUST (a) uninstall the free-trial version AND THEN (b) download/run the appropriate removal tool & restart (c) PRIOR to installation of a legitimate antivirus application (for example, Norton Security Suite freebie) AND BEFORE install any update of Windows (including the Service Packs & IE8).

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Additional references may include:

  Checklist for installation of Microsoft Security Essentials
  http://answers.Microsoft.com/thread/bf757e6a-E320-4a67-92bc-767e6acb26c4

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://answers.Microsoft.com/thread/87058857-D181-4019-a723-efd9a49d9275

  ==================================================================
  [1] ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

• can not see wireless connection status

  I struggled for the last week. For some reason I'm not able to see the network connection icon in my system tray/task bar. Apart from that, if I click with the right button on the wireless connection in the network connection and try to view the status, it shows nothing. I tried to change the notification in the taskbar area property partners as well as the wireless network connection properties. I think I've looked everywhere. I hope to post on the forum of microsoft would be useful.

  Reference:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/hnw_dc_show_icon.mspx?mfr=true

  http://www.TomsHardware.com/Forum/100977-45-notification-area-working-properly

• Connection has limited or no connectivity / wireless network not detected

  So two problems here

  1. I used to transfer studies ultrasound scanner for my HP Mini 110 - 1025DX PC. For this I used to establish a connection to the system, where the name of the internet connection was same as in HP mini and address IP was also the same, except for the last digit (i, e XXXX:XXXX:XXXX:XXX1 vs XXXX:XXXX:XXXX:XXX2). Firewall Windows should also be disabled for mini HP transfer studies. I repeated these steps after reinstalling windows but icon in the mini bar of task HP says limited connectivity or none and so I can't transfer studies. How can I solve this problem.
  2-HP mini also has Wi - Fi. Is there a way can mini HP tell me networks wireless in my range so that I can choose mine, key network related so that my wireless internet access also starts to work.  I'll be very grateful for any help.

  You want to connect your mini to the ultrasound with a cable machine and the mini to your wireless router to access the Internet.

  The next part of the instructions

  Right-click on the icon for your wireless adapter and select Properties

  should have been

  Right-click on the icon for your Ethernet card, and select Properties

  in order to properly configure your Ethernet (wired) connection to the ultrasound machine.  Sorry for the mistake.

  And, of course, if the mini is connected to the machine to ultrasound with the Ethernet cable, it is not to connect to the Internet via cable.

  Maybe you need to explain more clearly what the situation is.

  • The ultrasound using a cable or a wireless connection?
  • You want to be able to plug a cable between the mini and the ultrasound machine and when you have completed data transfer, connect a cable between the mini and your router?
  • When you "used to transfer studies ultrasound scanner to your HP mini" could you unplug the cable from the ultrasound machine and connect it to your router and connect to the Internet?

• Can not configure the Ralink dongle and I am referred to in article 871122 on the Microsoft site to activate zero wireless connections.

  I want to use a USB device to connect to the Internet, as my ethernet card is US I can not configure the Ralink dongle and I am referred to in article 871122 on the Microsoft site to activate zero wireless connections.  How to do this please?

  USB to the Internet connection.

  Hello

  It seems that your dongle is not installed properly. try to uninstall and reinstall the software dongle...

• I have re-installed Windows XP. My wireless does not, any more than my ethernet connection. What should I do?

  I have re-installed Windows XP. My wireless does not, any more than my ethernet connection. What should I do?

  original title: why isn't my laptop recognize the eathernet link?

  Go to your computer manufacturer's support web site
  and search for the Windows XP drivers for your specific computer or motherboard model number.

  If there are Windows XP drivers, then download to a folder on your hard drive and burn it to a CD/DVD.
  Then, after installing XP install all device drivers, start by installing the card mother/chipset driver first,
  then the SATA, Audio, USB, LAN, etc, drivers.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the newer Windows XP drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com