wireless connection of the TC

Similar Questions

• Wireless connection to the network home

  I recently bought a Tecra8200 with free Wi - Fi. I have a XPprof Windows installed on it. When trying to connect to my home network with wireless lan functionality, I am not able to connect to my router Sitecom WL-025. (cables) In exceptional cases, the system does not recognize the wireless network. In two cases only have been recognized my Sitecom and the Belkin to my neighbor. I've only had the SSID for routers. No connection. What settings should I enter to make this thing work with the version of wireless network card?

  Hello

  You can check the router if a MAC address verifivcation is enabled? You have any other PC with wireless connection to the router and look in these wireless settings?

  Goodbye, Meier

• WIFI disabled on windows vista and cannot wireless connect to the net

  WIFI disabled on windows vista and cannot wireless connect to the net, but bluetooth wireless Wi - Fi and fine switch is activated. Have a problem with ISATAP #5 who is incapable of solving that can be bound.

  All of a sudden I lost my internet connection wireless and I am unable to return.  May be because recent windows update.  Error messages on the wireless assistant say WLAN offshore or disabled.  I have tried every fix.

  In device Manager (under network adapters) shows also that MS ISATAP disabled with "Windows cannot load driver (Code 31).  When I try to update the driver, "Best driver already installed" appears.

  Is there a way to FIX?

  http://support.Microsoft.com/kb/932520

  Read the above re ignore this error message.

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• 5520 HP usb and a wireless connection at the same time

  I have set up my new 5520 HP with USB connected to my desktop (Vista) for maximum reliability and can print via printer share from my laptop (XP), but I'm obviously missing out on HP web services.  Can I have the USB connection or wireless connection at the same time?

  Hello f1charlie,

  Its new r: YES, because it would be 2 printer icons. One for the USB and the other for the wireless.

  The icon of the printer wireless would be similar to Hp 5520 (network).

  You can set these printer (USB or network) icon to by default.

  But again, every time that you want to print using any application. Click file > print, which will display a dialog box, where, in, you can select the printer icon.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP

• Failure of wireless connection to the router to the desktop

  I use Windows 7 and a router/modem method. The wireless connection to the internet recently stopped working in my HP Pavilion desktop computer. He still works for my tablet, but I can only connect to my desktop by Ethernet cable. It would seem that the fault lies in my office. The icon in the bottom right of the screen shows the wireless internet available as internet access card. I can't find any disabled dialog box display the Wi - Fi connection and troubleshooting shows no defects with network cards. Does anyone have any suggestions?

  If I understand you correctly, when you click the icon in the system Notification area, you can see a list of the available connections, including the SSID of your wireless network.

  If this interpretation is correct

  • Unplug the Ethernet cable
  • open network and sharing Center
  • Click on the link 'manage wireless network '.
  • Select your network
  • Click 'delete '.
  • Now close the window manage wireless networks
  • Click on the network icon, select your network
  • Click on connect
  • Enter the security password when prompted.

• OfficeJet 6600 e-all-in-one: Wireless connectivity with the new router problem

  We had the printer since 12 months, workin with no problems.

  Just got a new modem/router (NETGEAR V7610) installed as part of the NBN implementation and I can't get the printer to connect to the new router. 5 and 2.4 G active networks. The two defined newtorks on security WPA2-PSK [AES].

  The printer detects the wireless (2. 4 g) network, but can't coplete the connection. Tried the two direct input the network key and using WMA.

  -The display panel shows "wireless invalid password (WPA) is entered.

  -The results of network printer test page indicates a FAILURE on safety.

  I was able to connect to multiple other devices (laptop, iphone, Kindle...) without any problem. Used the two direct entry of the key network and WMA.

  Anything else I can try?

  Find a new update of the firmware for the printer (May 9, 2016).

  After you apply the update, the printer is able to connect to the new modem.

• HP ENVY 17-j184na Notebook PC: problems of wireless connection on the new laptop

  I bought a new laptop a few days ago and tried to connect to the network without wire in our apartment for 2 days but nothing helped.

  So far, I did the following steps:

  -Restore the system to factory settings.

  -Powercycled the network.

  -Reset the TCP / IP / catalog Winsock.

  -Checked and changed the stop option.

  -Re-installed and updated all the drivers of network.

  -Started in SafeMode w / networking and still unable to connect.

  -Ran all 3 windows solve problems and the problem of internet connection of HP.

  -Updated the BIOS with the latest version of the driver.

  I created my own personal hotspot using my phone and managed to connect very well, so I think that maybe that's a problem with my laptop to connect to my router, but everything else connects very well.

  I have an ethernet cable connected and has associated with perfectly too.

  My laptop is a HP ENVY 17-j184na Notebook PC and my wifi specifications are

  Manufacturer: Broadcom
  Description: Broadcom BCM4352HMB 802.11ac adapter Wi - Fi 2 x 2
  Driver version: 6.30.223.221
  Physical address: 40-E2-30-BF-F0-0D

  Modems are involved as much as I have the following (my apologies in advance, don't know how it's called technically, but it's the same one as in the photo):
  http://www.broadbandchoices.co.UK/guides/hardware/sky-broadband-routers

  I don't know if that helps, but also sometimes the connection does not appear in my list of connections, but it is very rarely, about 3 - 4 times in the last 2 days.

  If anyone could offer advice that could help I would really appreciate it and if someone needs additional information then please let me know (and possibly let me know how I could get this information).

  Thank you in advance for anything

  Hi all

  Problem has been resolved.

  Just in case someone else has the same problem, if you try to connect to a router and it communicates but don't connect does not then it might be a problem with the frequency to which you are trying to connect.

  In this case, my laptop could connect only to a 5 GHz frequency but my router was capable of a frequency of 2.4 ghz, so he was able to connect to all the rest but not that. (Particularly if you use a hub SKY).

  The problem has now been resolved by buying a wireless adapter card that plugs into the USB port. If you don't need to buy a Please make sure that buy you one with dual band capabilities.

  I hope this helps someone in the future!

  Best regards

• Impossible to establish a wireless connection on the Satellite

  Hi all

  I am desperate because I implemented an env wireless in my house, and all my machines work fine except the toshiba one.

  In fact I see the network wireless only in Intel tools, then I click the button connect and get connected a second and the GET disconnected (but wireless is always visible from the laptop.

  Where do you think the problem?
  Router wireless card or the problem is in the toshiba.

  Note that I'm able to make the system operational wireless on another without any problem.

  Thank you for your quick feedback on this issue.
  Best regards.

  Hello

  Not easy to say what could be wrong or what might help.
  You must see this:

  -> try to update the WLan card driver
  -> check the WLan card driver and advanced properties tab more you could disable option economic power.
  -> try to use own windows Wlan connectivity
  -> disable the encryption on the router and try to connect without any security option.

• R7000, problems with wireless connection after the last firmware update 1.0.6

  I recently updated to the latest firmware available for the R7000...

  The upgrade went well and my Wired PC all connected without any problem, but several of my wireless devices were unable to connect to the WiFi. I have my cell phone Wifi (Android phone) kept gives me an error of authentication, but was able to connect to the network comments... weird...

  I started firmware 1.0.4 and everything worked well again... it seems that the new firmware is buggy.

  The Firmware versions listed above are only for the first three issues, to save typing, but you get the version that I use...

  Nick

  Hello

  I would like to let you know, I've improved in 1.0.6 last night and everything worked. The difference is this time I had to reset my router to the factory settings using the reset hidden at the back button and hold the button for about 7-10 seconds. This resets the router to the factory settings. I then had to re-enter all my IP address reservations and the word block list, but all my wireless devices were able to connect. The last time I did the upgrade, I just restarted the router, and I had read that I had to do a factory reset to operate correctly.

  It would have been nice for Netgear arrive at a way to extract Information form my version last-place back... it would have saved me a lot of time...

  Good luck

• Desktop PC cannot connect while laptops successfully connect via a wireless connection on the same home network.

  I have a Windows XP desktop PC.  I also have two laptops.  I can connect to the internet via laptops via my wireless router, but I can't connect to internet via desktop even when it is plugged directly into my DSL modem.  I replaced the Ethernet cable, nothing helps.  My status of connection to the Local network on the desktop shows little or no connectivity, but I've done all the troubleshooting procedures, (including / Release ipcong & ipconfig / renew) cause a message saying: unable to contact your DHCP server.  Any thoughts on how to solve this problem?

  What's your DHCP enabled router wireless

  If yes then brand IP automatically defined in properties Office lan yor

  or try set ip next ip address manually your portable computer ip address serial with the same mask of the subnet and the gateway address.

  It can happen when dsektop cannot find the DHCP server

  Concerning

  Hope this will do the needfull

• I have a toshiba satellite A15-S 127 my wireless connection or the light does not come on when I try to connect

  even when I turn on my wi - fi I get no light, so when I search a connection it dosent show any wireless connection, how can I know if I have even a wireless card?

  Hello

  1. were you able to connect to the internet wireless with no problems before?

  2 have you made changes on the computer before this problem?

  Check the status of the NIC in Device Manager and send back the same.

  The following articles may be useful:

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  http://support.Microsoft.com/kb/314095

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Office jet Pro 6830: replacement 6830 don't no wireless connection during the implementation using the directions of ink instant

  I received a replacement 6830 due to the print head error. I installed the ink and followed the instructions to install the software. I got to the screen where it searced for my device make the wireless connection and it never "found" my printer. I am not able to connect. Information for install on mine was not clear. I tried to put in some information of the wireless display, and it did not match the format that was requested.

  Now I have a replacement Clipboard because when I try to print, it is not able to locate the printer through the wireless connection. When I go through my laptop to try to connect, I get this message: "Unable to connect with the device selected."

  I have connected the printer to my wireless router on thanks to the function of Assistant, so that is in the printer.

  Hello

  Sorry to hear that you are having problems with the replacement unit.

  Try to remove the printer (or all existing printers) and then add your printer by opening the Preferences tab and then selecting «printers & scanners»

  From there, click on the sign less under the printer icon to remove the printer and then add again using the sign.

  

  I've also included a link here to the guide of the user here that describes the steps of the Wi - Fi page 71 from.

• Lose the wireless connection when the modem connects to the internet.

  Hello

  I've updated my laptop to windows 7 (new installation).  I have a cable modem which is connected by ethernet to a wireless modem/router which I have configured to be a wireless access point (dhcp is the cable modem).  The laptop can connect wireless access point when the cable modem is not connected to the internet (so the ip address of the access point is 192.168.100.50 & the laptop takes an automatic ip address within the range). The problem is when I connect the modem cable to the internet, & so the ip address of the access point is derived the cable modem, the laptop can't connect to the access point. When I renew the ip address of the wireless card, it says it is connected to the selected network but the ip address is not correct, nor do I have access to the internet.

  The laptop connects fine to pick up the new ip address when it is ethernet connected the access point when the cable modem is both on or off, so I can access the local access point configuration when the modem cable is off, & can access the internet when the cable modem is enabled. When it is connected with the cable modem access point wireless at sea, both my wireless & ethernet connection say that they are connected to the selected network, but as soon as I turn on the cable modem, wireless connection says it is connected to an unidentified network, but my ethernet connection is connected to the selected network.

  I tried the broadcasting/no broadcast of the SSID, different levels of security, modification of the power saving options on the card wireless without success. I don't think it's a problem with the real network that the wireless card can capture the network & settings when the cable modem is disabled.

  This Setup has worked well when I had win xp.  My mobile phone can capture the network without wire end also & is able to access the internet.  The driver for the wireless card is current as well as the firmware on the access point.

  Can you please help? Thank you very much

  Hi Jack

  You led me in the right direction with the MAC addresses on the cable modem.  It's a simple solution... turn off the cable modem so it would refresh the MAC addresses of connecting devices, & hey presto, I wireless & ethernet access internet on my laptop with wireless internet on my laptop.

  Thank you for your perseverance.

  See you soon

• Windows 7 wireless connection to the field is not possible if the connection to the account not set cache

  We have a Cisco wireless network if a user is not logged previously wired and caching fails.    Is there a requirment W7 that successfully connect before it will make a wireless connection to authenticate on a domain controller?

  Kazakovvictor,

  Thank you for visiting Microsoft Answers!

  The question you have posted is related to networking in a commercial environment and would be better suited to the TechNet community.

  Please visit the link below to find a community that will support what ask you:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I set up a wireless connection with the Gateway desktop computer?

  I recently buy Gateaway computer (CPU) Office. But it says in the user guide that you can configure the Wi - Fi connection

  but I can, t able to put in place. In fact I, m trying to establish a wireless connection for printer. I want to download wireless

  drivers. You can solve my problem. MY PC model number is:-SX2110G if may be able to solve my problem, I will be happy with you.

  Contact technical support
  http://paapp.Acer.com/findsystem/FindSystem.aspx?title=contact+support&brand=gateway

  You have the right drivers for your machine and your operating system?
  http://support.gateway.com/product/default.aspx?modelId=4522.------

  You have a wireless router for your computer to connect via?

  Set up a wireless router
  http://Windows.Microsoft.com/en-us/Windows/set-up-wireless-router#set-up-wireless-router=Windows-8

  What it takes to set up a home network
  http://Windows.Microsoft.com/en-AU/Windows-8/what-you-need-Setup-home-network

  Connect wirelessly to the Internet with Windows 8
  http://www.Dummies.com/how-to/content/connect-wirelessly-to-the-Internet-with-Windows-8.html

• wireless connection with the unidentified network

  Hello

  I have recently moved house and who to connect my computer to the wireless network that we installed. He works to connect said however that the network is 'unidentified' and I can't connect to the internet. I tried to diagnose the problem, but nothing seems to work. There is nothing wrong with the router, because it works with all other computers in the House except our HP computers two and it works whenever I connect with the cable, but not wifi.

  I've had the laptop for about 5 years now.

  Computer: HP Pavilion DV6824eo PC entertainment network

  Operating system: Windows Vista 32-bit

  I would be very happy if someone could help me with this!

  Lovisa

  I managed to fix everything at the time, had to download the latest version of the WLAN ahteros driver.

  Thank you very much!