Wireless connection with my Equium L20

Hello

I recently bought an equium L20.

I didn't know he had wirless, I use wanadoo wireless and talk and currently plugin a wireless adapter for access internet.
When I put on the L20 it has detected my wireless connection but I can't connect to internet because it rpet aqquiring network address, but nothing more.
I have to buy a card or something?
Sorry to be thick but it's all new to me...

Hello Nicola

Please visit this page on http://www.windowsnetworking.com/j_helmig/wlan.htm WLAN. Very simply, it is described how you configure your WLAN network.

Your device has a wireless card and you do not need to buy something.

Good luck and if you have more questions please write again.

Tags: Toshiba

Similar Questions

  • Problem with wireless connection with HP 3070 B611

    I have a router with the IP address 192.168.0.1 and printer HP 3070 B611, whose 192.168.223.1 IP address, so the wireless connection with the printer fails.

    How to change IP address of the printer in the 192.168.0.XXX range?

    It seems that you are on a network other than your router. Reset your network settings on your DEFAULT PRINTER. Connect the printer to the router again, make sure it is the same network name.

    You can also unplug your router for 15 seconds and plug back in and then try to re - connect the printer to the router again.

  • iPod will work with my Equium L20-197

    I have a problem with my wife, Equium L20-197 in XP, when you try to sync with an ipod shuffle (gen2). Will not mount on my computer, is not detected by itunes, but is present in Device Manager but the report he needs a driver to operate properly.

    I ran windows update and use the latest version of itunes and everything seems to be up to date. I know that the ipod works correctly because it works fine with my desktop (also XP) computer and also with my mac at work. Can someone please advise on what I have checked for updates and patches and am any other ideas other than buying a different brand of laptop!

    Hello

    It seems that it is a question of iPod and not question of notebooks;
    Please check this discussion iPod in the other forum
    http://forums.ipodlounge.com/showthread.php?t=54039&pp=15&highlight=Windows+any more

    I recommend you to unplug the iPod. Then update the Win XP to the State!
    You must use Microsoft update page to install really all the patches and fixes. Notes; you have to restart the computer several times to get all patches installed.

    Check this solution XP:
    http://support.Microsoft.com/kb/925196

    In addition, you can see the Intel page for the update of the software of the chipset.

    By the way; If anyone could have problems using iPod with Vista pelase visit this knowledge of MS:
    http://support.Microsoft.com/?kbid=936824

    concerning

  • Problem with wireless connection with Satellite U500

    Hello
    Three months ago, I bought a Toshiba laptop Satellite U-500 (Windows Vista). I have a problem with the wireless connection - sometimes, it does not work and I have to restart pressing F8 and repair, then the connection is re-established; If I put into hibernation the connection is intact, but after a stop the problem maybe redo surface after the 2nd or 3rd session.

    I tried to format it, but it worked only for a while. The 2nd item in network adapters in the device (Realtek RTL8192E Wireless LAN 802.11n PCI-E NIC) Manager shows a yellow exclamation point. The message is this:
    "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
    Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

    Could you please help. I have sky broadband and am currently connected via the ethernet cable.

    Thank you
    Fauzan

    For 32-bit Vista go here [http://uk.computers.toshiba-europe.com/innovation/vista_drivers.jsp?macId=&LNG=1&mode=allMachines&us erOS = & action = search & SelCategorie = 2 & selFamily = 2 & salts Eries = 198 & selProduct = 855 & selShortMod = 1 & selOS = 26 & selType = all & country = 8 & language = 13 & searc h =] and download and then run the wireless LAN driver. That should clear the «!» If it isn't you can also find the vista driver at [http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=9&PFid=9&Level=6& Conn = 5 & DownTypeID = 3 & GetDown = false & downloads = true #R TL8192E]

  • Problems of sudden wireless connectivity with Qosmio G10

    I had a Qosmio G10 for almost 3 years now, and at least WRT my wireless connection, everything was fine until a few weeks ago.

    Little by little I started to lose the ability to connect to a WLAN after getting out of the mode standby (Win XP MCE): the computer wouldn't connect to my WIFI and would keep erratic jumps among the various wireless networks available in the neighborhood, without connect because they are all fixed.

    Initially, the problem could be solved by restarting the computer and the router.

    Now even that no longer works. I see either all local wireless networks, including mine, without being able to connect, or I see no WLAN at all.

    Windows status bar icons both ConfigFree show the small red cross and the system didn't budge. When I see available wireless networks, I'm trying to connect to my own, but then the computer attempts to connect forever. If I order for Toshiba ConfigFree * _For unchecking the checkbox in the properties window_ wireless * and I'm trying to connect manually my WLAN to the computer by dragging a link the said application to another provider program is in control.

    I have tried everything that came to my mind, the repair connection, enable/disable WZC, install new drivers for the Intel 2200BG, install the new version of ConfigFree... There is obviously some kind of conflict, but I do not understand what it can be.

    I don't know what else to do before decide to reinstall new Windows (oh dear oh dear). Moreover, my ADSL Modem/Router is always the same. The link has been dealt with by WPA/TKIP. Everything works fine with the other 2 computers and a phone with WiFi.

    Said by the way and quite surprisingly, a member of the family in another country began just having exactly the same problem on a Toshiba Satellite A110. In this case, the cause may be associated with the change of a Philips to a Linksys modem/router (either DHCP;) WPA/TKIP unchanged; everything works with another laptop in the same household)

    Can someone please help?

    Why use the CnfigFree tool to connect to the WLan?
    According to your message, you are using the Intel card.
    I would recommend so either use the Intel ProSet WLan client configuration tool or the clean option of Windows!

    > try to manually connect my WLAN to the computer by dragging a link the said application to another provider program is in control
    I assume that this error message is displayed because the ConfigFree is always chosen as tool to configure the WiFi network.

    However, the new installation of the OS may not be bad idea due to the fact that everything would be set up again.

  • Slow wireless connectivity with WRT54GS

    If I connect to the router with a LAN, I get ~ 63Mbps, but whenever I try to go wireless, the speed goes down between 12-15Mbps (at best). There is no update of the firmware for the router, and I am at a loss to the extent where how to get the best speed via a wireless connection. FYI, I have security WPA2 value, but I don't seem to lose a lot of speed (as appropriate) as a result of the security is enabled. I REALLY want to get the best speed via a wireless connection, but I am fairly new to try to figure out what kind of things networking, any help would be appreciated!

    The router is capable of speed of wireless connection reaching up to 54 Mbps. With today's ' Smart' technology, it would be a smart move, upgrade to a new router. Get a N router, if this isn't an AC, rather than keep the G one.

  • 4500 wireless connects with 2 systems but not a third party.

    All of the recommendations noted in all HP sites were conducted.  Gets the path looking for connection test

    but then fails at the end.  I've uninstalled and reinstalled the software several times.

    I have disabled the firewall (firewall even on other systems).   Printer can be seen by web access, and

    is configured correctly.  Have it connected to the third system now via USB.   System is running XP sp3 with

    the latest from MS and all the updates from HP. (HP system).  Other systems that work are a laptop

    with XP and a Vista system.   With the exception of the laptop that is wireless, other systems connect through

    a switch to a D-link router Dir 655 B.   Note that you can have the USB connection or wireless connection in even

    time on this printer.  Any ideas?   And please do not repeat the most obvious of which have already been addressed.

    (Note I work on computers for more than 40 years and know the networks, etc., etc.)

    Thank you.

    Don't know why, but just to the dickens, have you a device add tonight, after a few days with

    the PC race, print to the printer via the USB port.   Added the printer wireless, and she said very well...

    No changes to the system, etc., etc...

    So now have the printer installed twice on this system - USB and wireless.

    Would be nice if the installer fails he looks a why...

    Thank you all anyway.

  • Wireless connection with HP7410 xi

    I have a HP Envy m6 with Windows 8.1.   I rebooted the HP Solution Center and the software of HP7410 a couple of times.  I'll be able to connect wirelessly for a while, then the next day, cannot.  All the drivers look right, the IP addresses of the ports that all look... what happens?

    Hi it is @ TK4GT, welcome to the forums!

    I'm sorry to hear the issues you had with your 7410xi not to connect to your network. I' that my suggestion offer you, which I hope to get rid of the problem.

    Please follow these steps to keep the connection: printer does not maintain the wireless connection

    All the best,

  • How can I set up a wireless connection with the Gateway desktop computer?

    I recently buy Gateaway computer (CPU) Office. But it says in the user guide that you can configure the Wi - Fi connection

    but I can, t able to put in place. In fact I, m trying to establish a wireless connection for printer. I want to download wireless

    drivers. You can solve my problem. MY PC model number is:-SX2110G if may be able to solve my problem, I will be happy with you.

    Contact technical support
    http://paapp.Acer.com/findsystem/FindSystem.aspx?title=contact+support&brand=gateway

    You have the right drivers for your machine and your operating system?
    http://support.gateway.com/product/default.aspx?modelId=4522.------

    You have a wireless router for your computer to connect via?

    Set up a wireless router
    http://Windows.Microsoft.com/en-us/Windows/set-up-wireless-router#set-up-wireless-router=Windows-8

    What it takes to set up a home network
    http://Windows.Microsoft.com/en-AU/Windows-8/what-you-need-Setup-home-network

    Connect wirelessly to the Internet with Windows 8
    http://www.Dummies.com/how-to/content/connect-wirelessly-to-the-Internet-with-Windows-8.html

  • wireless connection with the unidentified network

    Hello

    I have recently moved house and who to connect my computer to the wireless network that we installed. He works to connect said however that the network is 'unidentified' and I can't connect to the internet. I tried to diagnose the problem, but nothing seems to work. There is nothing wrong with the router, because it works with all other computers in the House except our HP computers two and it works whenever I connect with the cable, but not wifi.

    I've had the laptop for about 5 years now.

    Computer: HP Pavilion DV6824eo PC entertainment network

    Operating system: Windows Vista 32-bit

    I would be very happy if someone could help me with this!

    Lovisa

    I managed to fix everything at the time, had to download the latest version of the WLAN ahteros driver.

    Thank you very much!

  • No satellite P300 - 18 M no wireless connection with Win XP Pro

    Hello people!

    I recently bought a P300 - 18M and installed Windows XP Pro SP3 on it. Everything works fine except the wireless connection. He know the switch for wireless connection is disabled because it is not all networks, although the switch is on and the wireless LED is lit.

    I checked the FN + F8 keyboard shortcut, I chose wireless only here...

    I downloaded the Intel drivers latest 5400 for the network card, but it is always no network :(

    Who can help out me?

    Hosts the Netherlands, Leon

    Hello

    There is also a WLan switch on the side of s for laptop.
    This switch must be activated also.

    Please check this!

    In addition, you can consult the WLan card properties in Device Manager.
    There should be an Advanced tab.

    There are different parameters, you should check out. For example, you can choose different WiFi standards such as 802.11 A B G, etc.

  • Bad wireless connection with wireless router. UN plug the router and plug it back and connection ok. Do this sometimes 2 or three times. Some time its ok.

    Set up a wireless connection from the laptop to my router upstairs and scia, we have that we have most of the time to kill the power to the router to reset the connection to the laptop. What anyone know or had this problem?

    And his age? If more two years, replace it. MS - MVP - Elephant Boy computers - don't panic!

  • Continual loss of wireless connection with Satellite C660

    Hello

    I hope that someone out there might be able to help.

    I've had my Satellite C660 for about 18 months now. Since the first day we had continual problems connecting to the wireless network. It connects but then lost the connection again a few minutes later, and then after a few more minutes, he reconnects. And the circle continues. An Ethernet cable didn't improve things.

    Initially, the problem is solved by leaving the laptop computer charger plugged, randomly that solved the problem and that is not ideal, I went with it because it worked.

    We have new broadband services and the router installed and the problem came back now, but this time the fix of power cable does not work, and once again an Ethernet cable does not work.

    The laptop is now continues to lose the connection, and it's very frustrating. I have 2 other laptops from Dell, 2 tablets, and they all work very well, never losing connection.

    Can someone give me it please advice on what could cause this problem and how to fix it (easily!).

    I can't wait to hear your thoughts and thank you in advance for your help.

    Glenn

    > Initially solved the problem by letting the laptop computer charger plugged, randomly that solved the problem and that is not ideal, I went with it because it worked.

    I think WiFi disconnects due to energy savings.
    As you say, linking the main specifications address the issue. I think because of the connection of the AC adapter, the laptop switches to another profile of power where Wlan energy saving is disabled.

    Therefore, I recommend to change the power profile that is used in battery mode.
    -> Panel-> power option choose the power profile that you use in battery mode
    Now, select advanced to change power settings
    You will find an option called settings of the adapter wireless (or something like that)
    The mode option of battery and AC adapter must use the performance parameters

  • OfficeJet 6600 e-all-in-one: Wireless connectivity with the new router problem

    We had the printer since 12 months, workin with no problems.

    Just got a new modem/router (NETGEAR V7610) installed as part of the NBN implementation and I can't get the printer to connect to the new router. 5 and 2.4 G active networks. The two defined newtorks on security WPA2-PSK [AES].

    The printer detects the wireless (2. 4 g) network, but can't coplete the connection. Tried the two direct input the network key and using WMA.

    -The display panel shows "wireless invalid password (WPA) is entered.

    -The results of network printer test page indicates a FAILURE on safety.

    I was able to connect to multiple other devices (laptop, iphone, Kindle...) without any problem. Used the two direct entry of the key network and WMA.

    Anything else I can try?

    Find a new update of the firmware for the printer (May 9, 2016).

    After you apply the update, the printer is able to connect to the new modem.

  • wireless connection with the non-administrateurs problem

    We use our cell phones to A60122 satellite with Windows 2000 in a windows 2000 domain.

    Only a local administrator can use the wireless network adapter. Any other user gets a ' no connection / cable disconnected "error. They cannot even log on - field not found.
    With the wired carte_reseau, everything works fine.

    Someone at - it an idea where to start looking?

    Hello

    Have you tried to give rights of administration for all users?

Maybe you are looking for