Wireless connection works only when the printer is turned off

my desktop computer requires an adapter wireless for internet connection.  installation of this card was problematic and I discovered I mean it was because of my printer - a kodak esp 6150 desktop, which can work wireless.    I can only connect wirelessly when the printer is off on this computer.  However, two other laptops that do not need a separate wireless adapter are able to connect wireless when the printer is on.  any suggestions?   Thank you.

Hi Moscotty,

You can read the following article and check if it helps.

Windows wireless and wired network connection problems

Tags: Windows

Similar Questions

  • My Ipad charger charge my iphone 5s only when the phone is turned off

    Hi guys. My Ipad charger charging my iphone 5s only when the phone is turned off. The phone does not recognize if it is on and I can't transfer files with it. Help, please?

    Hey Bigfootinyourface,

    I understand that you have a problem with your iPad charger or cable. Accessories and connectors uncertified can often result in the mentioned behavior. Article in the link below provides information that you may find useful.

    Identify the fakes or not certified lightning connector accessories
    https://support.Apple.com/en-us/HT204566

    See you soon!

  • Satellite P30 seems to completely charge the battery only when the unit is turned off completely

    Hi, I have my Toshiba Satellite p30 and only works on battery. This unit operate on sector or only on the battery as after the period of time go down the warning, then closes. The orange light fades in and out, but seems that it will only fully charge when the unit is turned off completely.

    I only just received this unit so bit of a novice.

    MASH

    Hello

    normally, the battery should always charge until it is full when the power is connected.
    If you have an orange light flashes, it means that something is wrong. Maybe your battery is faulty or something else. This should be checked by a technician.

    Good bye

  • Tecra A5 - charges the battery only when the computer is turned off

    Hello

    For a few days, my Tecra A5 has started to beep and stop it (like when the battery is low) then that it was connected to the power supply adapter.

    I finally realized that when the computer is plugged in, the battery discharge and does not use the power supply to recharge.

    On the other hand, if I turn off the computer, the battery starts to charge.
    I replaced the battery a few months ago, so I think it's still OK.

    The charger would be defective? Seems strange since it can always recharge the battery when the computer is turned off.

    Thanks in advance for your contributions.

    > The charger is defective?

    Theoretically; Yes, but could also be electronic supply on the motherboard is affected, but on the first stage of the AC adapter should be verified and laptop needs to be tested with AC adapter new, good work.

  • DeskJet 3522 printing scanning copy: hp dj 3522 disconnects wireless network when the printer is turned off

    I have the above printer.  As indicated, it disconnects from the network when it is off.  I have a Westell A90 750014, MAC, disabled filtering router, the printer has been added in the MAC filter table, and in the wireless station status is listed as "associates".  When I reconnect once disconnected from the network, I am able to reconnect using the simple push button config method.  Can someone tell me a way to feel connected to the wireless network.  Thank you very much for your help.

    Hi @scotty1963

    I understand that you have problems with your printers wireless function despite all your efforts. I'm sorry to hear that, but it will certainly do everything I can to help

    Please use the following document to solve the problem and I would like to know the results of your efforts; The printer keeps Wi-Fi connection.

    I hope this helps.

  • Vista and Color Laserjet 5 M reprints all when the printer is turned on?

    Vist and Color Laserjet 5 M reprints all when the printer is turned on?

    It is a new one on me. I installed the printer with a barrette SIMM Postscript so it would work even at all under Vista and now it prints well but insists on the fact that I have all re - print he has never seen a reason any whenever I turn the printer to print something again.

    XP he has never done that, but I've always had the document cannot print the error that I ignored as he did print correctly.

    Google has not really revealed anything?

    ?? Type response level 1 I was looking for... These printers are a full restart, test of memory and when it is off.

    But I think I solved it, spent some time on google and there was a suggestion on the spooler in vista, was something like clear keep printed documents or print spooling first, I went also to start printing after the last page. Who took care of a lot of it somehow. Not sure why the generic installation program would need to be changed here. Possible I did for me somehow when I was trying to get the thing to work with the PCL driver too.

    Then I noticed that whenever I turned on the printer it is printing a page of demo postscript, for some reason any, it is enabled by default in the SIMM option. Turn power off and now its not wasting so much paper now.

    So two things to look for in the computer and the printer.

  • J611 3050 has installed on Vista and works very well. Installed on Windows 7 and said always the printer is turned off.

    My Deskjet 3050 a J611 is installed on Vista and it works fine. I then installed on a Windows 7 and the installation went well. No error message came, but when I try to print nothing happens, it just sits in the queue. When I run the diagnostic windows to solve the problem it says the printer is turned off. But it's not far, I can print the Vista machine.

    Download and run this utility on the Win 7 machine: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

    What did he say?

  • Do the "keys" on each side of the Envy4500 lights when the printer is turned on?

    I just bought two new Envy4500s and at the same time on them, the "key (i.e. up/down, 'ok', etc.) on each side of the display screen does not light up when the printer is turned on."  HP rep said they should, but on any machine they light up. Thus, all "keys" are essentially impossible to see. Any help would be greatly appreciated. Thank you!

    Hello @paularose,

    Thanks for posting in the Forum from HP Support.

    I see that you are curious about the screen of the HP ENVY 4500 e-all-in-one printer.  I would like to help.

    The arrow keys do not light up when the printer is on, but as you can see when you look at your own models, they are clearly identified.

    I hope this helps.

    Kind regards

  • Microsoft ON essential to keep all the time automatically, when the PC is turned OFF? I don't know to do.

    Dear Sir/Mam...

    I installed Microsoft essential to protect my notebook of virus & spy ware. When I turn off my laptop sound off automatically. Please send me the details to keep essential Microsoft on all the time, even my laptop is OFF please. Icon for turn on essential Microsoft whenever I start my computer. I can't find the related parameters in the ICONS.

    Once a computer is turned off, it's... Well well, off the coast.  But not just asleep, off.  By the definition of 'off' it does nothing.  Microsoft Security Essentials is a program and only works when the computer is turned on, as all of your other programs.  You cannot run a program when the computer is turned off.  The good news is that a computer is turned off is completely protected against malware are malicious software programs and does not work either.  There is absolutely no need to have anything by protecting your computer when it is turned off.  That said, I think that your concern doesn't really MSE all the time, but that's automatically done already when you turn on your laptop.  Not to worry.

    You see the pop-up warning that MSE has not yet started Microsoft.  If you click on the Start button in the pop - up notification MSE should start (but not immediately).  It may take a minute or two.  If you wait just MSE must start with itself and the notice will go away without having to do anything.

    I see the same thing when I run one of my virtual machines that you see when you start your laptop.  I'm very familiar with it.  It goes away in a few minutes and only means that from MSE wasn't the first thing the computer did when I turned on.  Windows moves to finally start MSE, but you can the long hurry up if you want.

    To manually start Microsoft Security Essentials, find its icon on the lower right side of your taskbar (called the "notification area").  The icon looks like a Red House with an X on it.  Right-click on the icon and choose open on the pop up list.  The MSE window opens on the desktop.  Click on "Start it now" button in the window that appears.  The window fades.  It may take a little time to start the MSE.  When everything is OK, home in the notification area icon will turn green with a check mark.

    When I see the Red House, I usually just give the computer a few minutes to complete marketing and the problem goes away on its own.  On rare occasions I start MSE myself.

    Colin Barnhorst

  • My reading shows the HDMI as a default device, but the sound is yet to come of the computer laptop, even when the volume is turned off on it

    Original title: HDMI sound

    I know that many have had problems, but I did not mine specifically. My HDMI connection was working fine with my laptop HP and m HD tv. I didn't use it for a while, now it is just the video, no audio on the TV. My reading shows the HDMI as a default device, but the sound is yet to come of the computer laptop, even when the volume is turned off on it. Ive read all the reviews and updates of pilot who was old. I don't know what else to do!

    Hello

    System Restore does not have this long period of time.

    You may want to refer to the suggestions in the thread below link and check.

    No sound via HDMI output portable computer connecting to TV

    I hope this helps.

  • The trash empties automatically when the computer is turned off. How can I fix it.

    The trash empties automatically when the computer is turned off.  How can I fix?

    The trash empties automatically when the computer is turned off.  How can I fix?

    Find what to do (something you installed and/or took the time and effort of installing) and undo - because it isn't Microsoft / default, or even something extremely simple (not something inadvertently, you can check, etc.) to (that happen.)

  • Wireless router WRT160N cable on the desk, I loose internet when the laptop is turned off.

    I have wrt160n v2 router wireless, it does not work for me.

    If my wireless XP laptop is only powered ON the Vista desktop internet wired connection works, I'm not wired or wireless using laptop computer, not on the internet, only power.

    If the laptop is turned off, I have no internet on the desktop, always connected via the router.

    The laptop is used and I didn't know if the without built-in thread was pretty new, so I bought a card to go in wireless.

    When everything is on everything is to play on the internet times two computers, but if you turn off the laptop I have to connect internet directly on the Office to continue in the internet.

    I started working with a tech support yesterday and they are difficult to understand. I had put in the new firmware and the problems persist.

    Can someone help me, I don't really have time to be on the phone for hours figure this all out.

    Thank you

    Jackie

    go to http://audipages.com/router/ and follow the instructions

  • Satellite Pro U400-11V - charges only battery when the computer is turned off

    Following a reformatting my hard drive of the computer, my laptop recognizes only the AC/DC power adapter when it is turned off. When the computer is turned on, it does not recognize the AC adapter.

    Changed the power supply ac and it made no difference.

    Have also tried an update of the BIOS (3.0), I am running Windows Vista 32 bit.

    Hello

    I doubt it has something to do with the software or the operating system. In my opinion, that this looks like a hardware problem, because the battery will be always charged if AC/DC adapter is plugged in. That's why it of not necessary to enable this setting in the configuration of the software.

    If your BIOS is already updated, contact an authorized service provider. Technicians can check your laptop and maybe the motherboard needs to be replaced.

  • HP ENVY m4-1015dx Notebook PC: hp envy m4 battery not charging but fresh when the laptop is turned off

    Hello!

    I was with my hp envy m4 core i7 for quite a while now... recently, I formatted and installed windows 8.1 64-bit installed. I decided to download some drivers from the hp site and I realized I needed to provide my model of laptop model number I could not remember so I decided to remove the battery while the computer is still connected to the power for the number, then I went back to the battery. the latter, I realized that the cell had not accused beyond of 7%, which was the level of support, until I removed the battery and when I checked the charge level, it indicated that it was plugged in but does not support. When I tried to repeat the entire process as well as close the laptop, remove the battery and turning it again nothing work and completely refusing to charge for its on.when I decided to turn off completely and then it was off it perfectly complete accused 100% operating battery estimated more than six hours of charge time, guys help me to understand what might have developed and what will be the best solution.

    Hi @Phanz,

    Thank you for your inquiry.

    I entered which you have tried to download the driver on the HP website for your laptop but realized you need the model number.  You have removed the battery while the laptop is running.  Now when you reinstall the battery, it shows that it is connected but does not charge and continues to 7%.   You have repeated the process and close Notepad and removed and reinstalled battery, but there was no change. If you turn off it charges the battery to 100%.

    You did all your Windows updates?

    Have you tried the troubleshooter in Windows?

    First of all, I would like to try a Windows restore to before remove you the battery.

    HP computers - using the Microsoft System Restore (Windows 8)

    If restore doesn't work or is not possible, you could try a Refresh Your PC to solve problems (Windows 8).

    Then you can try the following steps.

    HP laptops - test and calibrate the battery (Windows 8)

    The battery method compatible ACPI Microsoft control is basically the driver that communicates between the computer and the battery. There is a chance that it became corrupt and bad reads the battery level.

    Step 1. Go to the Device Manager
    Step 2. Select the stacks
    Step 3. Click with the right button on the "Microsoft compatible battery ACPI Control method" which is in the list
    Step 4. Click on uninstall
    Step 5. At the command prompt, put a checkmark in the box to remove the current driver
    Step 6. Shut down the computer

    Step 7: Remove the battery for a minute and then put new

    When the computer returns to the top it should automatically find the driver.

    Step 8. Go to the Device Manager
    Step 9. Select the stacks
    Step 10. Click with the right button on the "Microsoft compatible battery ACPI Control method" which is in the list
    Step 11. Click "automatically search for an updated driver.

    Do the same thing with embedded controller compatible ACPI Microsoft.

    Last option is to reinstall your Windows 8.1 Pro.

    Good luck!

  • calendar-clock does not retain the exact time when the computer is turned off

    original title: calendar-clock

    Clock only works when the computer is turned on.  It does not update the time.

    date does not update also. It is a program in windows vista.

    The year stay as the exact year, or back to a previous year, after restarting the computer?

    If the above applies:

    You probably have a failed in your motherboard CMOS battery.

    It's a battery power supply NET, size piece that keeps your system settings when your computer is off.

    They cost about $5 to replace.

    http://www.computerhope.com/issues/ch000239.htm

    How to replace the CMOS battery in the above link info.

    See you soon.

    Mick Murphy - Microsoft partner

Maybe you are looking for

  • Satellite Pro A40 - cannot connect WIFI tstablish

    Hi guys I have a Satellite Pro Model: PSA45E - 0184H - EN Problem is I can not establish a wireless connection, the laptop can not be set automatically detect wireless networks? Any help would be appreciated. Thank you.

  • HP Mini 110-3131DX. Replacement hard drive

    I bought and installed a new hard drive in my HP Mini (I had already dropped my Mini and caused the hard disk break) but when I turn it on it says now no. Bootable Device. What's wrong? What should I do to make it work correctly?

  • have toshiba LL850 want to resize image for the background but have tried most things and still does not

    I have a Toshiba L850 and try to mount an image for the background.  Have you tried the resolution of the screen to pull the lever, but still does not.  Can someone go through the steps for me please.

  • The elusive Service Pack 2 for Windows XP download

    Fortunately, I have the Service Pack 2 Setup file currently hard - to get on my hard drive. Here is some important information for those who need: Name: WindowsXP-KB835935-SP2 - ENU.exe Size: 266 MB (278,927,592 bytes) File version: 5.5.1005.0 (SRV03

  • Java connector and env variable

    Hello When we connect to RDSH farm with java connectore we get an environment CLIENTNAME a variable IP address of the client machine, but when we connect to RDSH farm with connectore ordinary we get a CLIENTNAME variable a host name of the client mac