Wireless connections do not work after a system restore

Similar Questions

• My keyboard does not work after a System Restore checkpoint to help get rid of a virus

  My HP desktop computer has a virus that disabled McAfee, Avast and Malwarebytes.  I tried to solve the problem with the solutions found on the internet. My last attempt was to make a System Restore checkpoint.  The restoration was a success, but as soon as my PC restarted during the process of my keyboard don't work, when I went to enter my admin password.  The keyboard works fine in the recovery console, but not in safe mode or when I try a normal start, any advice would be appreciated.  Can a repair installation fix the problem?  What is the result of a corrupted registry of the virus? Do to restore the keyboard driver?

  Hello

  • What is the brand and model of the keyboard?
  • What is a wired or wireless keyboard?
  You can view these methods if you are able to connect:
  Method 1:
  You can check with the keyboard of the screen.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/osk_overview.mspx?mfr=true
  Method 2:
  I also suggest you try to update the drivers for the keyboard and check.
  http://support.Microsoft.com/kb/283658
   
  Method 3:
  You can also try different keyboard and check.

• CreativeCloudSet - Up.exe does not work after Windows system restore

  Hello

  Accidentally fallen Windows Update that broke my system. Was required to make a system restore which deleted all record of my installed applications of cloud creative, even if the files are still physically present.

  Now that I am trying to reinstall creative cloud, I don't see a CreativeCloudSet - Up.exe is 'Initializing install', then it closes and nothing else happens.

  After you run the CS cleanup tool, Creative cloud resembles install (its icon appeared on my desk). However, when you try to run it I get:

  Adobe Creative Cloud has stopped working

  Windows can check online for a solution to the problem.
  

  Signature of the problem:

  Problem event name: BEX

  Application name: creative Cloud.exe

  Application version: 3.0.1.88

  Application timestamp: 554caead

  Fault Module name: StackHash_5861

  Fault Module Version: 0.0.0.0

  Fault Module Timestamp: 00000000

  Exception Offset: PCH_2B_FROM_ntdll + 0x0003D72C

  Exception code: c0000005

  Exception data: 00000008

  OS version: 6.3.9600.2.0.0.256.48

  Locale ID: 1044

  Information additional 1:5861

  More information 2: 5861822e1919d7c014bbb064c64908b2

  Additional information 3: bb02

  Additional information 4: bb02c3b29c3f075104f1d0629e885cfc

  Adobe Creative Cloud Tool.log Cleaner: https://gist.github.com/anonymous/1d5b3fec04c8df1ee92d

  uninstall all cc on your computer by using the uninstall programs.

  Run the cleaner use by the cleaning tool CC to resolve installation problems. CC, CS3 - CS6

  then install the application of office cc, https://creative.adobe.com/products/creative-cloud

  Use the desktop application to install your other adobe programs.

• Excite PRO 3G connection does not work after last update Android v4.3

  Hello

  I live in Italy and last Sunday (26 January) my excited PRO Tablet (model AT10LE - A - 10 H) received version Android 4.3.201121220.35.

  After restart my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".

  My sim card is ok. I used this sim card before the system update and I don't have a problem with Android 4.2.2.

  Please help me.
  Thank you

  > After reboot my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".

  Go to mobile network settings and search again for the 3G network.
  I had a similar problem with my Android Smartphone and my o2 provider
  I started to search for new, so I chose the O2 again and then I could solve the problem.

  In the case where this does not work for you, recommend you to reset the default Tablet (factory settings)

• Keyboard does not. Able to use for the connection does not work after that.

  The keyboard works to connect. But does not work after that.

  Hello Sml15,

  The embedded screen keyboard should still work even if the physical keyboard isn't.

  Try this first...

  Press and hold the Windows key and the space bar.

  If no joy, go to the search bar and with the built-in keyboard, type the filter keys and choose key filter on or off.

  In the window of the ease of access to the keyboard, disable FilterKeys.

  If all goes well, which will fix the problem.

  Let me know how it turns out.

• Network connection does not work after reinstalling Windows XP.

  Original title: problems with reinstalling XP.

  I had re format and re install windows xp but now my network connection does not work.  I have no IP address, even if my router and the pc are on DHCP. Device Manager tells me that the controller Ethrnet on the motherboard has no drivers, but I can't find a driver.  Any thoughts appreciated.

  Hi John Fisher_888,.

  You can download & install the drivers for the adapter from this link & check if it helps

  http://support.Dell.com/support/downloads/devices.aspx?c=us&l=en&s=Gen&SystemID=DIM_PNT_P4_8400&OS=WW1&OSL=en

  Hope the helps of information.
  Please post back and we do know.

• Wireless device does not work after downgrading from Windows 7 to Windows Vista.

  Original title: wireless device does not.

  recently, I got my os from windows 7 to vista, now my wireless device does not work. I checked the Device Manager and the report shows that my network controller driver is not installed and the modem on high definition audio bus device. I tried to install it, but in vain. What should I do?

  If your computer manufacturer does not have Windows Vista drivers available, you're probably out of luck.  Without drivers for these devices will not work.

  'spyc' wrote in the new message: * e-mail address is removed from the privacy... *

  recently, I got my os from windows 7 to vista, now my wireless device does not work. I checked the Device Manager and the report shows that my network controller driver is not installed and the modem on high definition audio bus device. I tried to install it, but in vain. What should I do?

• Wireless mouse does not work after update Vista graphics driver

  Hey whats goin' I'm looking for a little help here Irecently downloaded a new graphics driver on my laptop and rebooted... suddenly all OOF, mouse not working anymore... What do I do?

  * original title - my wireless mouse died after I downloaded a driver what should I do? *

  Hello

  The video driver may be accessory to the mouse does not.

  Reboot again. If the mouse still does not work, check the batteries in the mouse and receiver
  connection. To the need to update or reinstall the mouse drivers - check with Microsoft Hardware, LogiTech
  or anything done to the mouse for the latest drivers.

  ==================================================================

  If this seems to be a USB problem AFTER the foregoing:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• HP dv6-6c10us: HP dv6-6c10us Broadcom 802.11n wireless adapter does not work after windows 10 installed

  I have a laptop HP dv6-6c10us with a Broadcom 802.11n wireless adapter.  It worked fine on Win 7.  When I upgraded to win 10, it has stopped working.  The driver has not been updated since 06/02/13.

  Until the driver is updated by Broadcom or HP, this computer is now a desktop computer.

  Any suggestions on how to get the adapter wireless on Windows 10?

  I recommend you to go back and do a system restore to a point before started to install the automatic updates, and where worked the wireless.

  Then download this tool that stops updates to install automatically.

  https://support.Microsoft.com/en-us/KB/3073930

  Hide all of them and then install one by one until you find the one that is to destroy the wireless connection.

  When you have found the culprit just hide it again and it will not be installed.

  You can create a system restore point each time you install an update.

  Tedious, but you should get where you want to be.

• Wireless connection no longer works after that the virus

  First a browser both stopped working for a month or two, and finally Internet worked from my laptop (although it worked all my other devices). Now after trying to fix my internet system works when it is plugged directly, but is no longer detects wireless connections, and the light doesn't light even when I switch 'on' the wireless switch. Help, please! Thank you!
  Mike

  It's a laptop?  With built in the wireless?   Assuming that so-

  Usually the unit must be included in the same device manager if there is a driver problem.   I suggest you check the BIOS.  The wireless is displayed there?  Turned on?
  I suggest that you update the chip set driver and also try to download and install the driver wireless from your computer manufacturer.   We'll see from there.

• my wireless connection does not work.

  The taskbar displays the icon and that it is connected.  I got a virus deleted recently, and the wireless did not work since.  The ethernet connection works, but there are times where I need to have wireless connection works on my suggestions l?

  Hello

  Maybe this can help, http://www.ezlan.net/wireless.html

• On the Satellite A200-1CR wireless connection is not working properly

  Hello

  I have a problem with my wireless connection. In spite of I stay close to my router I can't access the Internet.
  If I have the connection, it is the level of 1 to 3 (5 is best).
  I have the same problem with "hot spot". I can't access the Internet or use only messenger, can't surf the Internet, check my emails, etc..
  Another person do not have this problem in the same places. They can access the Internet. What's wrong? Can you help me?
  I have a Satellite A200-1CR.

  Piotr

  Hello

  For most Wlan issues are related to problems of compatibility between the wireless network card and the Wlan router.
  Sometimes the Wlan driver allows to obtain the best performance.
  So, try to update the WLan driver first. Maybe it helps.

  Good luck

• Satellite M70-173: wireless connection is not working properly

  Hello

  I am a novice and need help with Wi - Fi. I have laptop Satellite M70-173. My desktop pc is connected to the Netgear MR814v3
  802 11b cable/DSL with wireless router. I have connected the router to my broadband (telewest) and have access to the internet on my desktop pc. I turned on the connection Wireless via the menu of the router (the lights is on the router it's transmission). My wireless laptop is switiched on, BUT when I use windows on the laptop to get a wireless connection, nothing is detected. The laptop is 50 cm from the router. I tried and did the following:

  Firmware update,
  Made sure the SSID is the same on the router and the laptop.
  Wireless on laptop mode is on infrastructure,
  Wireless access point is enabled.
  List of access on the router is enabled,
  No encryption is used until I have run

  Any ideas any help?

  Thank you

  Hello

  Have you activated the wireless antenna?
  Please check if the switch wireless on the side of the unit is on. Also check if the wireless is turned on with the FN + F8 key combination

  Please check this possibility

  Concerning

• Unable to connect to the internet after the system restore and Windows Installer (Vista)

  Hello

  I have recently restored the whole system on the HP to my sister a virus that I was unable to remove it manually.
  The system restore went well until it has reached the point where he was going to reinstall Windows. The computer just turned itself off and the software installation was not complete. I am able to reinstall again. I must therefore hold the CTRL + alt + delete, go to Task Manager, click on audit.exe and complete the process to turn on the computer. But I can't do anything with it in safe mode. The main problem is: I can't connect to the internet! Even if the network discovery is on it will not find my wireless network. What can I do on the internet? And is it possible to install Windows again without the CD?
  Thanks in advance!

  Hello

  ·        You are able to boot to the desktop in normal mode? If this isn't the case, then you get any code or message?

  ·        How did you did system restore?

  ·        Are you referring to the system recovery using the recovery partition or the drive?

  I suggest that you start in safe mode with network and check if you can access the internet?

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Note: select SafeMode with networking among the startup options.

  Respond with the required information so that we can help you further.

• computer could not reboot after the system restore and now do not start or respond to f2 or f8

  My brother prefomed a system restore, after restoring the system, that it has restarted, however never got to the windows form.

  Then he turned the system with a difficult start, which got stuck before the windows screen.

  so after I told him trying to start with f8 during boot, this has had no response.

  then I had him find his records recovery and told him to start while now the f2 and his computer crashes when you try to find its usb devices.

  I have no idea of what is wrong and worry that it will not respond to f8 or f2 start

  Look at the top right of your keyboard.

  You can have a F-Lock key that prevents you using F2 or F8.

  See you soon. Mick Murphy - Microsoft partner