Wireless Desktop work with internal BT on Satellite P200

Similar Questions

• Wireless Desktop 3000 (with 2.4 GHz transceiver v6.0) not recognized XP

  I bought two games Wireless Desktop 3000 with the intention to replace the cord of the configurations on two desktops on XP Pro SP3. On two XP computers, plug the transceiver gives an error "unknown device", with the driver, do not load.

  Is it possible to get just the driver of the transceiver, or am I just GROUND on this until we have upgraded to Windows 7 in 2015?

  Guys, my original problem was solved when I realized the transceiver has been broken. Return unit and to get a job one was the only solution, as transceivers are apparently matched and unable to be activated, making the matched kb/mouse unusable and trash.

• What wireless keyboard works with KDL60W605B

  What wireless keyboard works with the smart TV KDL-60W605B

  I need to know this before I go and buy any keyboard, since the concessionaire of the shop did not and I was not able to find information on home Sony sites.

  I think SONY should provide its members with a URL that show how their products are compatible with other products. Especially if they sell not the products themselves.

  Thanks for the message. Based on the specifications of the KDL-60W605B, a keyboard (USB or Bluetooth) is not supported by the TV. However, the TV is compatible with TV SideView app where you can use the mobile phone to control the TV. For more information about TV SideView app please refer to this article.

• Microsoft Wireless Entertainment Desktop works with BT integrated?

  Hi guys,.

  I was wondering if the Microsoft Wireless Entertainment Desktop 7000 (keyboard and mouse combo bluetooth) works with the built-in bluetooth (Satellite A300-1QM) module. Any experience anyone? I would like to know if I should use the (usb) bluetooth dongle that comes with the Office Wireless or if I can use the integrated bluetooth in Toshiba.

  Thanks in advance,
  Head of bed.

  This keyboard and mouse don't work with the receiver Bluetooth internal.
  You need the dongle that you get with these input devices.

• Satellite C660 - wireless connection works with AC power

  I have problems with the connection Wireless on my laptop. It works when I plug in the power supply. It does not work when the laptop is running off the battery voltage.

  Is it possible to get the wireless to work without AC power?
  Thank you

  Please visit http://aps2.toshiba-tro.de/kb0/TSB12033H0001R01.htm
  I hope this will help you.

• The Xbox 360 wireless controller works with PC, or what I have to buy the Xbox 360 Wireless for windows?

  I want to know if the wireless Xbox 360 controller will work with a PC if I just buy the receiver, or I have to buy the real Xbox 360 controller for windows to work?  Because I just bought the receiver only and installed, but when I try to connect it to the controller the controller just flashes and never connects.  Which leads me to believe that there is something different with the Xbox controller for windows.  Please let me know.  Thank you.

  Straight from this follow-up to the letter...

  1. open Control Panel
  2. open 'display devices and printers '.
  3. right click on 'unknown device '.
  4. click on properties
  5. click on hardware
  6. click on properties
  7. click on change settings
  8. click on the driver
  9. click on set to update driver
  10. click on "Browse my computer for driver software".
  11. click on "Let Me pick from a list of drivers for devices on my computer.
  12 double-click on Microsoft common controllers
  13. click twice on "receiver wireless Xbox 360 for Windows Version: 2.1.0.1349 [2009-08-13].
  (or click on the latest version of the wireless receiver driver)
  14. click on Yes
  14. use the connection on the receiver and controller to connect and enjoy

• Tips before buying HP all in one wireless to work with mac and AirPrint

  I am looking to buy a HP Officejet Pro 8600 as my current HP is on the blink (well I think it's that I posted here with my problem with the Office Jet Pro 8500 and now it does not work with my mac at just my PC windows) but I need to know if I buy a HP Officejet Pro 8600 can I upgrade the network and not only print , but the scan wireless (probably more AirPrint) to a Mac Book Pro (end of 2011 on the last updated firmware), or is there a better printer for this task which is so cheap that I do not use the fax, but I'm going to use all other options; I print about 300 pages per month, as we Exam course and working documents to be printed on a regular basis in my house, that's why I'm leaning towards an Office Jet.

  Can what advice you give?

  Finally, what is the difference between a HP Officejet Pro 8600 and HP Officejet Pro more than 8600?

  Sorry I'm so "wet behind the ears" when it comes down to this

  See you soon.

  Hello

  The 8600 pro is a great printer, however, the 8500 is great too...

  By looking at your original post the question more likely related to your network and not with the printer itself.

  Before purchasing a printer new please try following the steps below and let me know if this can help, if the problem caused by your router you will instead see a similar behavior with the 8600 too:

  Unplug the cable ehthernet on the side of the router, and then connect it directly to your Mac (a direct connection cable between the printer and the Mac itself).

  Wait 2 - 3 minutes to allow the connection to fill and then open print & scanning.

  Click on the sign more and add the printer listed as Hello.

  Now start the software update from the Apple menu and check if you can scan via print & scan, Capture Image or excerpt:

  http://support.HP.com/us-en/document/c03550518

  If the analysis works by bypassing your network the problem caused by lack of compatibility Hello of the BT Home Hub, which can be called as Hello, mDNS, by different router or multicast IGMP manufactures...

  I recommend you contact your router service provider to check if it supports this feature and if such can be activated by changing the settings of the router, a firmware update, etc.

  You can find more info on this requirement in reviwing Solution 2: check your router for compatibility Hello in any information from Mac OS X in the document below:

  http://support.HP.com/us-en/document/c02915280

• New Wireless Desktop 800 with no transceiver - what can I do with the keyboard and mouse?

  I have a MS Wireless desktop 800. After a week, I broke the mini transceiver and bought a new game. Since the first set keyboard and mouse are matched at the factory and cannot be re-synched, I find myself with essentially a new keyboard and mouse that I can't use. I wouldn't throw out - they are brand new. Is this WHAT can I do with them?

  Hello

  There is no suggestion that we can do to solve this problem.

  It's specific hardware of matching which can only be solved through software.

  You must contact the material support of the link below:

  How to replace Microsoft software or hardware, order service packs and replace manuals:

  http://support.Microsoft.com/kb/326246

  I hope this helps.

• HARD drive only works with 5 UDMA on Satellite A100-906

  Why the disk hard s - ata on A100-906 works with the MODE ULTRA DMA 5 and not 6 or higher it should be with the controller s - ata.

  Hello

  How did you check that?

  Just for info:
  The UDMA 5 Mode = UDMA100 and UDMA133 the UDMA Mode 6
  Perhaps the DMA controller supports the UDMA133 but the HARD drive doesn't.
  Sometimes the UDMA133 is not automatically enabled on hard drives.

  For example:
  I read that the UDMA Mode 5 is activated automatically on the Samsung drives and if someone wants to use mode UDMA 6 then must be activated manually.
  In this case, the application of the 3rd part is necessary as Hutil.

• Need help with installing XP on Satellite P200-IEE

  I mucked up my work phone thinking I could convert vista to xp by myself, questions of driver and software is the reason. I bought an xp license and have the disc.
  My laptop is a Satellite p200-IEE. I downloaded what I thought, was that drivers sata (f6flp32) put in the xp disk and drivers as above on a floppy drive.
  It goes, however, loading, ask you to press s and comes then in place with the installer of txt - oem could not be found. Any ideas of what I can do I need my laptop for work Monday morning.

  HELP Please

  There are some problems with installing xp on vista laptop... After talking to toshiba agent he's recovery discs there to put xp on as a straight install normally fails by experience.
  Some won't take only short xp. (for one, made this mistake on a new laptop!)

  Your best bet is the recovery disc and screw with vista, but do not install service pack 1 again... There are questions. Sort of a work in progress for Bill and his friends...

  Concerning

  Published by: ADMIN

• problem with the drive map satellite p200-1ba (pspb6e) on windows 7

  Hello! I have recently upgraded to windows 7 and my card reader does not work. I have a laptop p200-1ba (pspb6e) satellite. I installed intel chipset utility, robson package and everything seems fine in Device Manager, but nothing happens when I insert my card in the card reader. Anyone any ideas? Thank you.

  Hello

  > No support of flashcards for windows 7-32 in the downloads section

  Have you tried Vista? Most Vista drivers are compatible with 7

• Wireless does not work with Vista on a Satellite L30-10DS

  How do you get the WiFi to work on vista?

  Hello
  Your question implies that you couldn t your work wireless home or both.

  This way, you first make sure you that if you really have wireless or not. It s not that hard. Just look in the windows Device Manager.
  If a wireless card is installed, then give feedback and maybe we'll find a way to connect with something as an access point.

  If no, then buy a card and let it install by a qualified technician, you can also apply this technology for the wireless connection. :)

  Welcome them

• N what internal wireless card work with my Presario CQ60-204NR?

  I just bought a N Wireless card on ebay but got the error "104 device not supported wireless network found.  I updated the bios form F.34 F.54, without change.  I've looked through the HP support pages, but seem to be going in circles and not to find whatever it is approved.  I am running Vista Home Basic 32-bit, even though I know that the problem is actually in the white list of BIOS of wireless devices.  I don't want to push every update from Microsoft to find out which interferes with an upgrade wireless, as stated in another post here.

  Thanks for the pointers.

  Jack

  Hi, Jack:

  Here is the link to the service manual for your laptop.

  http://h10032.www1.HP.com/CTG/manual/c02985882.PDF

  The only wireless cards, you can install are listed in Chapter 3, pages 3-7 and 8-3.

  They must also have the part number HP on them, or they won't work.

  So if you are interested in one of these cards, I recommend that you do your research on eBay by part number.

  I see that there is only one card that can be a dual band card, and it is the WLAN Atheros AR9280 802.11a/g/n module.  And I don't know if it is dual band N or just only on the 5 GHz band.

  Part number depends on what part of the world you live. For the USA, which would be part #.

  482260 001.

  Paul

• Wireless not working not not on portable Satellite

  I bought my laptop in November and were much used but last night my wireless completely disappeared when I was on the laptop. It's now only send me options to connect to the Ethernet cable.

  I tried to restart the PC but the problem persists, I also tried to turn airplane mode on/off, but that does not change.

  When I tried to diagnose the problem, he said that the tuner wireless did not work.

  Can anyone help me with the problem or I should send it to a service center?

  Thanks for your help

  It is important to know if the wireless card is available in Device Manager and if it s recognized correctly without any yellow exclamation.
  In case the WLan card isn t listed in Device Manager, then your wireless card may be defective.

  But let's assume that NO hardware problem.
  In this case, the common WLan card driver reinstall should solve the problem.
  Try to download the compatible driver WLan page driver Toshiba and check if the installation work. It would be possible that the system must be restarted after such a facility.

• The Ralink RT5390 in a Pavilion dm1z wireless card works with WiFi on 5 GHz?

  I have a Pavailion dm1z, which uses the Ralink RT5390 wireless card. I have a router dual band with WiFi networks on 2.4 GHZ and 5 GHz. The dm1z is unable to pick up the SSID in the 5 GHz range, it can for the 2.4 GHz band. Is the Ralink RT5390 card dual wireless broadband? Can it captures my 5 GHz wireless network? If this isn't the case, allow new drivers for it? Or the dm1z can be updated to capture the WiFi in the 5 GHz range? What other options I have to do the 5 GHz WiFi?

  (5 or 2.4 GHz) USB adapter should work well on the laptop.