Wireless devices can see the wireless network but not connect

Can someone please help?  I have a WRT54GS v2.  My wired computer accesses the Net fine, and I can see MAC address, IP address, DNS, subnet mask, default gateway in the navigation of the linksys software. The devices can see the network with strong bars but can't connect.

Help!

Thank you

Yes, I tried all of these suggestions before posting and thank you for the reply.  I even called Comcast, my cable provider, in despair attempt to resolve.  Of course, they were no help, but it didn't end up being a problem, with what they should have helped me.

By simple trial and error for several hours, I discovered that the domain name required to be filled in the first Panel of the router Linksys software.  The domain name resulted in the status panel but needed to be included in the initial group.  The forums I read had informed that some cable companies require the name of the computer and the domain name is filled and others not.  Obviously, if Comcast domain name must be filled out, but not the name of the computer.

Tags: Linksys Routers

Similar Questions

  • Suddenly, I can open is no longer my comcast email. I tried to delete cookies and clear the cache, but neither helped. I can see the Inbox preview, but not the Inbox, and I can't open any email. Help! I hate having to use IE!

    When I click on "open entire inbox" the police seems to become very large briefly, then it returns to its normal size. I can't see my entire inbox or open anything!

    Use of IE, to connect to this site mail Xfinity account and open the preferences. On the general tab, switch to Xfinity Connect Lite , hit interface Save' at the top left of this dialog, and then disconnect.

    Then try View entire Inbox in Firefox.

  • Laptop detects the neighbouring network but not my home network?

    My problem is the following...

    My Hp Pavilion dv4 1225dx Vista SP1 computer laptop works very well on our router WRT160, computer laptop Dell Inspiron 8600 XP SP2 from husbands can detect the neighbouring network but not ours. Any suggestions, I searched the forums for answers with no luck.  Thanks in advance!

    Change the channel and SSID or.

  • I can connect to the local network, but not to the internet

    Why in an internet connection, I can connect to the Local network, but not to the Internet.
    I have valid IP address and configuration is good.

    I recommend you read some threads here in the forum about similar issues.
    If this problem occurs using the WiFi network, then check if you can use the connection to the local network.
    Using the WiFi network, you must check if the common WLan parameters are favourable;
    Check if the encryption key is right; turn off filtering by mac address, check the TCP/IP protocol settings if it has been set to automatic, disable the firewall settings, rest you WLan router, check if you connected to the right SSID.

    Good bye

  • Where are my views? I can see the image numbers, but no image. Help, please.

    Where are my views? I can see the image numbers, but no image. Help, please.

    Hi Rob,

    I just wanted you to know that I'm fine now... I just had to find the original files... must have moved a link or something?

    Thank you for your help.

    See you soon,.

    Lisa

  • Huawei Sonic is recognized in devices and printers, and shows paired but not connected in the settings on the phone.

    Original title:

    Try to connect Huawei Sonic to win7x64 pro edition using bluetooth.  Huawei Sonic is recognized in devices and printers, and shows paired but not connected in the settings on the phone.  How do I overcame the problem of connection I want to transfer photos from phone to PC?

    Hello

    1. are you able to communicate and share with other Bluetooth devices?

    2. what happens when you transfer files?

    3. do you get an error message?

    4 you did changes to the computer, before the show?

    Method 1:

    Connect the phone to another computer and check.

    Method 2:

    If you are unable to connect to another computer, you can contact the manufacturer of the phone and check.

    http://support.Huawei.com/support/

  • Specific wireless network does not connect in Windows 7, but does in Windows 10?

    I have a Toshiba Satellite L750D laptop, it is about 3 years old now.

    I use Windows 7 for a while. Everything works fine to connect wireless at home and more than other wireless networks, but the hours was spent without success to get it to connect to the wireless work (Ministry of education, that's why this included fiddling around with the proxy settings and user authentication options). I got it to connect properly this wireless in the past, but to another school.

    I had given up on actually being able to use internet in my class to improve the education of students.

    I upgraded my computer to Windows 10, then suddenly, following the same steps that we had tried before, my laptop had no connection to detnsw disorders. Hooray, 21st century learning!

    Unfortunately, some of the hardware in my computer graphics or something couldn't handle Windows 10 (or I couldn't manage Windows 10 and what he did to my outdated laptop), so I had to use the restore function, which came back my computer to Windows 7 without having to format my computer and re - install Windows 7 from an external source.

    Now she continues to refuse to connect, even advise that to contact the network administrator.

    It's driving me crazy. What is different between the 2 operating systems that allows to connect without fuss one way and deny the other way?

    I have triple checked everything I could think of that could prevent the connection, including the drivers and my antivirus, nothing helps.

    Is this just a case of Resistentialism that cause me to seriously consider spending the money that I have not currently on a new laptop just so I can show the occasional Youtube educational video?

    Has anyone else had a similar problem, or is it just me?

    Hello

    Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

    The problem may occur if the network drivers are not correctly updated or you need to change the network settings.

    Method 1: Please follow the steps described in the article Microsoft help to the given address:

    Using the troubleshooter from network in Windows 7

    How can I troubleshoot network card?

    Method 2:

    I suggest that you change options for both the systems on the network in the Advanced sharing settings (Open Network & Sharing Center > Advanced sharing settings to change):

    -Enable network discovery

    -Turn on the file and printer sharing

    -Turn on sharing so anyone with network access can read and write files in public folders

    -Turn off password protected sharing

    Now, try to map the drive, follow these steps:

    1. click on Start, click on computer and click map network drive in the options under the address bar.

    2. in the drive box, click the drive letter to use.

    3. in the folder box, type \\server\share, where you can type the IP address of the drive to be mapped. For example, if the IP address is 192.168.6.xxx, you type \\192.168.6.xxx.

    4. click on Finish.

    Let us know if you need more assistance. We will be happy to help you.

    ___________________

    Thank you best regards &,.

    Isha Soni

  • My office will connect to other wireless networks but not my own.

    original title: the internet disorder

    everything in my house is my internet running at home, but for some reason, my desktop connects to the internet outside but not my internet has the House that I don't know what to do?

    Hello

    I suggest to refer to this link and follow the instructions in the link below and check, if this can help:

    http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows?T1=Tab03

    It will be useful.

  • Movement of keyframes does not - I can see the values change, but nothing happens in the monitor!

    I'm having a nightmare trying to program in a few Motion keyframes to change the position of an element in my program monitor.

    I created the image key to assign the value of the position of an element in the timeline - I want the clip to move toward the Center on the side of the screen. I followed the guidelines and can see the keyframe symbols appear in the view of key images marking the beginning and the end of the change. What is strange, is that when I press play, I can see values changing in the effect controls panel - but nothing really happens in the clip! The clip in question has a silhouette figure, that I created using images of the figure against a green screen, which has then been hidden. I then applied a track matte key to the below item to fill the silhouette with footage - this has something to do with my animation does not?

    I checked to assure that I do apply keyframes for the clip, checked parameters interpolation of keyframes of & all seems in order. I'm new to first, & I apologize if I've properly referenced the different tools or windows - but I hope you get the idea. I looked online but can't find someone reporting a similar issue, that is certainly a first when you are working with such a popular program. I hope that it is something stupid and can be easily solved.

    Can someone tell me why the keyframes, I could, & can change the clip plays, are not actually affecting the clip at all? Any help would be greatly appreciated.

    I realized after the announcement that if I applied the keyframe to the matte rather than the silhouette clip keyframes of the movement worked. Thanks for the advice so guys!

  • Home network Windows 7 and XP: can map drives etc network but not to synchronize OneNote

    Hi all

    I have a Windows 7 laptop and a desktop XP SP3, all connected with happiness to a wireless router. On both machines, I have the very underrated and generally wonderful notes 2007, which I rely on for the study. I'm reasonably texh-savvy, but I don't know what I don't know, so it is very likely I missed something very obvious.

    I can update my OneNote notebooks on the Win 7 to XP machine fine machine, but the Win 7 machine does not update the notebooks on my XP machine without asking for a password.

    I checked the following:

    • They both share the same group, the WORKING group.
    • The OneNote Notebooks folder properties have 'action' and 'allow other users to update' boxes ticked on the tab share
    • The Windows 7 laptop can 'see' the Office XP on the network, but by double-clicking on the icon on desktop XP asks for a password
    • When you look at the map of the network, the XP machine is nestled on the corner and not shown to be 'joined' to the router
    • Portable Win 7 I can map a network drive by using the IP address to a shared folder on the XP machine and move files without any problem
    • "File and Printer Sharing" on the Panel of control-> connections-> 'Properties of the wireless network' network is checked
    • Both machines have static IP addresses
    • I don't put passwords for each machine
    • My computer-> tools-> Folder Options-> enable Simple file sharing is checked
    • Guest account is enabled on the XP machine
    • Password protected sharing is DISABLED on the Win 7 machine

    I suspect that there is something that I have not checked/unchecked somewhere on my XP machine.

    Why is the Win 7 computer phone harassment me a password when you try to synchronize a OneNote or click the icon under 'network '?

    Y at - it an exhaustive list of things that I should check or an article somewhere that covers this? I googled loads, but only have mounted artuicles cloud sharing with OneNote 2010 and sharing of files between Windows 7 and XP, nothing on a password is requested during the synchronization of the OneNote files!

    Thanks in advance for your help. I know the legacy tech support is a royal PITA, and I promise you that I will be upgrading to a more sensitive setting when I have the dosh, but in the meantime, I would appreciate some advice! :)

    Hi dogsolitude_uk,

    Follow these methods.

    Method 1: Follow the steps in the article.

    Networking of computers running different versions of Windows

    http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

    Method 2: Temporarily disable the security software.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  • My Windows 7 computer is no more can detect the wired network, but all my other wireless and wireline devices connect very well. Replace the network card and no change.

    Hello!  This morning my Windows 7 (the motherboard Acer) desktop ceased to recognize the wired connection to its network card.  In other words, it shows kind of connection, but notes "no Internet access.  It connects to a surfboard by Motorola through one Ooma hub, although I encounter the same problem when I connect to the desktop directly to the surfboard.  All other devices Wi-wired and that connect to the surfboard are functioning properly.

    Thinking that the Realtek NIC on the motherboard Asus was the problem, I installed a new Trendnet network interface card in the PCI slot.  I disabled the network card to the motherboard via the BIOS settings.  No change.  Always 'no Internet access.

    Time Warner Cable test the modem from their office and said it was working properly.  I also connected a laptop directly to the surf board using the same cable, and he was able to connect to the internet.

    Can someone help me understand what the problem is?  Thank you!

    You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

    See the communication from this "criticism" - McAfee

    Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

    You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

    I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  • How can IM connected to the wireless network, but not to the internet, I fix?

    my laptop can no longer connect to the internet, but for the wireless network I can view other computers on the network, but can't go on the internet it says unidentified network.
    I took all the troubleshooting steps to resolve this problem without success.
    all ideas

    Scott,

    Are you the same Scott, I tried to help the last month? If this is you, I left a couple more views. In one of them, I explained that exactly the same problem you encounter happened on my son's computer. I just disabled the router, waited for about ten seconds and he turned his back and that's what it took. I used actually utility of Windows troubleshooting and he advised me to do.
  • NB200 can connect to wireless networks, but cannot connect to the internet

    I could connect my Win XP netbook to my network wireless secured to the House, other networks and public networks such as the library and McDonald's. This week, I am away from home and discovered that while I can still connect to a number of different wireless networks, I can't connect to the internet with Internet Explorer.

    I had this problem once before and fixed by reinstalling Windows XP and all my other software. I have no idea why it happened again. I'm hoping for a less radical solution to the problem... ?

    Hello

    You can try to renew the IP address.
    Got to RUN and type CMD.
    This would start the console (DOS window)

    Here, you use the command: ipconfig / renew

    It s also advised to update the Wlan driver. I've noticed some problems with older drivers for Wlan
    Here you can get the most recent:
    http://APS2.toshiba-tro.de/WLAN/

    Welcome them

  • Able to detect the wireless network but cannot connect

    Help, please!

    I have a HP Pavilion DV6 using Windows Vista 64-bit.

    My network wireless adapter intel is able to detect wireless networks three on my College campus.  I know that these networks is currently (I can access it on other devices and my suitemates can view them on their laptops.

    When I double-click a network dialog box appears and informs me that the laptop is currently connected to the network.  After about 30 seconds it says it is unable to connect and an opportunity to try the troubleshooting options (which, alas, never work).  I recently tried to download the latest drivers for the network adapter, but also, it does not work.  The adapter is turned on via the switch on the keyboard and the HP Network Assistant.

    What should I do?

    Hello

    You have a few options in my opinion please try these steps can help you solve your problem.

    (1) unplug the battery adaptor & then press on & press and hold the power button for laptop for 30 seconds then switch on and check if the wireless led lights.

    (2) go to Device Manager then uninstall the drivers wireless network card and restart the device and check if the light is on.

    (3) try to do a system restore to the date where unit was working fine.

    (4) Please update the Bios driver & wireless from the HP website.

    (5) click on start search type Recovery Manager, and then click on it once select Yes on user access control, and then select I need immediate help and then select driver and select request recovery driver wireless and install it and then restart the device.

    (6) If you are comfortable with reinstalling the wireless card that will be on the rear panel of your device you can try this steps as well.

    If you still have the same issue then you need to call HP tech support and get the replaced part.

  • New wireless card will see available networks but not connect

    For over year I now, I had been using a USB wireless network (I'm not sure it's official name) fine to connect my desktop computer to the wireless, but when that broken I decided to use a wireless card instead. I plugged it to the PC installed the drivers that came on the disc and restarted my PC, when he started upward I saw my (and a few of my neighbors) points of access wireless, but when I tried to connect it gave me varies from error messages including the single "windows was unable to connect to . as well as to tell me the password was wrong a few times (this however is not the case) and finally he would be in touch with ' limited access. When I now run the possibility of troubleshooting problems, it tells me I have a "problem with the wireless adapter or access point" which has not been set. But before he also gave erros as an asisgned not correctly IP address"(I don't remember the exact wording).
    During and since these errors I have restarted my computer several times, reinstalled the drivers from scratch several times and as he told me I had a problem with UP-address I ran have run the command "ipconfig/all", which produces the following section under 'WiFi 2' (who is the connection I am trying to connect):
    The connection-specific DNS suffix:
    Description: 802.11n Wireless LAN Card
    Physical address: C8-3A-35-C9-FF-1C
    DHCP enabled: Yes
    Autoconfiguration enabled: Yes
    Link-local IPv6 address: fe90::2427:959c:823 b: cde8% 30 (Preferred)
    Autoconfiguration IPv4 address: 169.254.205.232 (Preferred)
    Subnet mask: 255.255.0.0
    Default gateway:
    DHCPv6 IOOKING: 516438581
    DHCPv6 DUID client: 00-01-00-01-17-7D-CD-F1-BC-AEC-5-26-31-DE
    DNS servers: fec0:0:0:ffff:1 1%
    FEC0:0:0:FFFF:2 1%
    FEC0:0:0:FFFF:3 1%
    NetBIOS over TCP/IP: enabled
    The card that I use is the Tenda W311P and my install of windows is windows 7 Ultimate, the hub I'm trying to connect to is a Hub of BThome.

    Thanks for your time.

    Tom

    Hi Thomas,

    Thanks for posting your query in Microsoft Community.

    I understand that you are facing problems with wireless network in Windows 7.

    I imagine the inconvenience that you are experiencing. I will certainly help you in this matter.

    Were there any changes made to the computer before the show?

    Please follow the steps in the link.

    Wireless and wired network problems

    http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Hope it will be useful. If you still have questions, please reply and we will be happy to help you.

Maybe you are looking for