Wireless for HP OfficeJet 6500 a configuration more all-in-One on Ubuntu 10.04

Similar Questions

• HP Officejet 6500 a Plus e-All-in-One - E710n ' slow printing - cannot scan.

  Windows 7 64

  HP Officejet 6500 a Plus e-All-in-One - E710n

  Wireless connection

  Until recently, I noticed that it takes a good 45-60 seconds to print. From the moment that I hit print say at the start of the printing printer. Real bummer, but today I tried to scan and got an error "Scanner communication cannot be established... "I've uninstalled all the drivers and the printer and reinstalled same thing any suggestions I have to be able to scan.

  Hey alsmith1964,

  It seems that the network communication between the PC and the printer has become lost or locked up.  The first step, I would suggest in this case is to perform a cycle of power to all devices in the network circuit.

  Follow these steps to reset your printer HP, your router and your computer.

  1. To turn it off, press the power button on the HP printer.
  2. Unplug the power cord at the back of the HP printer.
  3. Unplug the power cord from the wireless router.
  4. Turn off the computer.
  5. Wait 30 seconds.
  6. Reconnect the power cable to the wireless router.
  7. Wait 30 seconds, or until the router is completely ready.
  8. Turn the computer on.
  9. Wait for the computer to recharge.
  10. Reconnect the power cord to the back of the HP printer.
  11. Turn on the printer.

  I would like to know if it is able to get the question to be resolved,

  Jason

• My HP HPE desktop computer can no longer communicate with my OfficeJet 6500 e7 n - z all-in-one

  My HPE Office has Windows 7 64 bit desktop and OfficeJet 6500 n - z e e7 are wired and fine until this morning when I downloaded and installed a "Coupon Printer' programme of work. When I tried to print a coupon, it wouldn't print. There is no error message. It just wouldn't print.

  Then I noticed that installing printer Coupon had changed the default printer for the fax printer. After that I changed the default value for the 6500 regular he still wouldn't print. I ended up uninstalling the printer Coupon progam but that did not help. The Toolbox of the printer, I learned that "the computer is unable to establish two-way communication with the printer.  The proposed solution was to try to update printer drivers. When I tried it, but the "HP Update" window only offered 'HP Photo création' software, no driver updates. I tried to restore the system to the two most recent previous restore points, but that doesn't work anymore.

  What must I do to re-establish communications between Office HPE and the OfficeJet 6500?

  Hello hansford,.

  There are many other procedures for troubleshooting that you can try to restore the functionality. Click the link below for assistance through troubleshooting:

  http://goo.GL/IFgOc

• HP Officejet 6500 a Plus e-All-in-One - E710n Flashing lights, do not print

  It doesn't matter what I do, blinking lights on the printer.  The machine does not print and gives an error every time I try.  I had this problem last week and I cleaned my printer cartridges and the holder and that fixed it, but now the cartridges will move yet for me to check out them.

  Janet

  Hi Katze407,

  It seems that the printer can be stuck somewhere. Here are two guides to help you try to find the problem:

  'Paper jam' message displays on the all-in-one

  "A 'carriage Jam' or ' 0X610000F6" message

• HP Officejet 6500 a Plus e-All-in-One - E710n

  This printer is adjustable to print a selection highlight rather than the page as a whole?

  I assume that you do not want to print part of a Web Page?

  If so, you can check the addon HP Smart printing :

  http://support.HP.com/us-en/document/c02994297

  If not, please specify what software you want to print from.

  Kind regards

  Shlomi

• HP Officejet 6500 a Plus e-All-in-One - E710n I want to print on a standard size postcard

  I want to print on a standard USPS postcard (3.5 x 5.5 "), but I don't know if I can do it. The manual says we can't print out a 3 x 5. I don't know how to load the postcard. When I push the medium on its back where the paper goes... He just keeps flowing back in the recesses of the printer, which would obviously result in a horrible jam. I certainly don't want to cause a jam. Anyone know if this is possible?

  Hello

  Yes, the #24 of the next book page shows you how:

  h10032.www1.HP.com/CTG/manual/c02519721.PDF

  You will also see the #35 page.

  Good luck.

• OfficeJet 6500 has more All-In-one: network of disabled features

  hP 6500 has more all - in-one E710 gives the message "integrated network capabilities have been disabled contact your network administrator" when I go to network menu.  I rest to factory default and get restarted three times and still the same message.  Powered down of every thing.  Same result.

  Hello @Walt101,

  I would like to help you today to correct the message 'integrated network features have been disabled. Contact your network administrator' on the front panel of your HP Officejet 6500 a Plus e-All-in-One. This feature is programmed into the printer itself and can be disabled under webserver shipped as part of its security printers.

  If you have configured an admin lock on your printer, you must collect the IP address, your printer off and access the printers built-in web server by entering the IP address in the address bar of the internet browser on your computer. Once you access the built-in web server, you can configure the administrator lock settings.

  If you have not set up a lock on this machine to 'lock' the network capabilities, I'll have to send you a private Message with the semi-complete programming reset so that you can win your network of return capabilities. Please check your private Messages for instructions.

  Good luck!

• HP HP Officejet 6500 a update more e-All-in-One-E710n multi fails @ 96 %Z

  HP Officejet 6500 a Plus e-All-in-One - E710n

  Windows Vista

  HP tries to update my HP Officejet 6500 a Plus e-All-in-One - E710n w / "HPZSetup.exe & multi fails @ 96%.

  Errors:

  HP-PhotoSmart all-in-One Series "Error" "wStub" "2229580".

  Same message appeared several times with new numbers: 459624; 525134; 328216

  I'm on WIFI but the system still shows me on USB.  I thought that maybe that was the problem, then I plugged in by USB. No help.

  I guess that's an update?  HP is insistent and stop sending me this day that alwaysends a fatal 96%

  Next steps?  Thank you JLM_JR

  No problem. Everything works now or this tool only deleted the HP software? If so, then try to download the full features software to see if it does not work or not here. Please choose your operating system that is appropriate; 32-bit or 64-bit. I will seek forward to hearing from you.

• How to set default COPY for HP Officejet 6500 has more quality DRAFT?

  How can I set default COPY quality to the PROJECT for HP Officejet 6500 has more?

  Hello

  Press on copy on the front panel of the printer, then press the settings button.

  Quality faucet and quick selection / project.

  Press on set as the new default settings, and then click Yes to confirm the changes.

  Later draft quality will be used for the copy unless any other quality is selected.

  Kind regards

  Shlomi

• OfficeJet 6500 E710a-f: how to download the latest firmware and the BASE driver for my Officejet 6500 on Windows 7

  I'm looking for a way to download the latest driver and firmware base packages for my Officejet 6500 E710a-f for Windows 7, x 64 (latest patches and service packs applied).

  Regardless of the road I take (including the link called "Download drivers"), finding drivers inevitably leads me to the same page that contains the vertical tabs named 'Troubleshooting', 'How to' and so on and none of the links - not even under 'options to support more' - led to a Basic downloadable driver package. In fact, none of them leads to a downloadable driver package of all kinds. The most that I could find is that package Wizard driver installation that attempts to download the package that I am not interested in-oh and a few mentions in the KB articles downloadable driver packages.

  I also tried "Printer Setup, Installation" & Setup and then variously "Installation, install & connect printer ' and 'Software updates' & Firmware, which none offer a downloadable package.

  This used to work perfectly fine a few months ago, but now I'm getting round on the same page over and over again. I can not find the basic driver or the software for the printer more.

  Where can I find the basic driver package (used about 30 MB in size) in order to avoid the crapware included in the package (130MO) "full feature" more great who gets automatically downloaded to an unknown destination on my hard drive using this driver installation wizard. It's my PC and I want to be the one who decides in which runs when and how. Now I can try to track down the location of download using ProcMon and what not, but it would give me is this package 'feature complete' with a bunch of crapware added on strictly necessary. How to get the base driver package?

  Thank you!

  Never mind. Fascinating, the "Download drivers" link under the Support tab at the top leads to a different page that the link "search for drivers' next to my question posted .

  Both methods require enter the name of the model (after picking "Printers" in the first case) in a similar way, but the former led in circles on the same page with no possibility to download, while the latter one immediately takes me to the downloads, I was looking for.

• For an Officejet 6500 E709n is the required HP Hpzlnt04.dll file?

  For an Officejet 6500 E709n is the required HP Hpzlnt04.dll file?  I was scanning plugins and Printer Monitor specified designation unknown. Then I searched on Google and said results it might be a virus named Hpzlnt04? It is necessary or can I remove it?

  Hi there swishl,

  The file is a library of links necessary for HP printers. If you are worried about the validity of the file from this link. They give a good description of the file and its attributes of text is faith. Hope this helps.

  Good luck!

• OfficeJet Pro 8600 Premium e-All-in-One - N911n photo paper is not a choice of paper to Tray 1

  For the HP Officejet Pro 8600 Premium e-all-in-one - N911n

  I am running Windows 7 64 bit

  No error message

  New configuration of the printer

  I don't see as a choice of paper photo paper in Tray 1

  Hi FrancoArdito,

  Follow the steps below to print photo Tray 1

  1. Insert the photo paper 4 x 6, 5 x 7 or 8 x 10 Tray 1

  2 open the print application printer preferences

  3. click on the paper/quality tab

  4. Select the paper size, media Type and paper source

  5. click OK to save the settings, and print the application program.

  

• How to scan a legal document size on the office jet 8500 hp has more all in one that you use?

  I need help in a legal size document scanning, when I try to scan scan only letter size, I do not know how to change the scan of a legal size scan on my officejet 8500 has more all in one printer

  To scan legal-size documents I advise to use the software that must be installed with the printing of HP scanning software. Once you open the scanner, there should be an option on the top of the window to select it scan the area. Choose "Legal (8.5x14)" and continue as usual. You want to scan from the tray as well and not from the ADF. Here is a document on the analysis of HP:

  http://support.HP.com/us-en/document/c03476857

  Keep me posted and let me know if that helps!
  

• HP Officejet Pro 8600 e Plus: HP Officejet Pro 8600 Plus e-All-in-One Printer series - N911g and instant ink

  Morning

  Does anyone know if the HP Officejet Pro 8600 Plus e-All-in-One Printer series - N911g is compatible with the instant the ink program?

  Thank you

  Stuart

  @StuartTunstall

  Welcome to the HP Community Forum - we are a community of fans of HP !

  It seems that your printer is not eligible.

  Connected - HP Instant ink > FAQ > my printer is eligible for the moment ink HP?

  I also checked the datasheet for your printer and did not find any indication of instant support of ink.

  Time for a new printer HP brilliant?

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• HP Officejet 7612 large Format: HP Officejet 7612 Wide Format e-all-in-one is faulty

  HP Officejet 7612 Wide Format e-all-in-one is defective. Print function is no longer available, only fax

  I got it about 2 months and it was working fine, but now all of a sudden he lost his printing function and instead try to fax? I have even a land line phone, so I do not understand how the printer got confused autonomy. The print option is missing options.

  In addition, it seems impossible to take HP for assistance. The last time I tried, a month before, was because my money of £30 back ever happened, I've been hunting for days and no way to contact HP, so finally in desperation, I started trolling the FaceBook page of HP, all of them, several times each day, begging for counseling and that finally worked. Finally, someone contacted me and helped me to solve my problem.

  Hi @Terriann1,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you use a HP Officejet 7612 Wide Format e-all-in-one printer with a Windows 10 computer and when you try to print, the computer thinks you're trying to fax. I would like to help.

  I would start by download and run the HP print and Scan Doctor to check the installed printer software. This tool can diagnose and solve many problems of printing software and printer.

  What technical telephone contact HP Support, when you visit the Web site and go to support, you may need to create a case to fill in some blanks before the phone number becomes available. I also found this web page which could have information useful contact for your area - phone help around the world.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!