Wireless icon not is not turned on.

Similar Questions

• HP 4585 Wireless does not turn off

  I have a HP Photosmart C4585 all - in - one printer and it does not turn off using the power button.

  I have already disconnected the cable, waited more than an hour and it has not solved the problem.

  I also completely uninstalled and reinstalled without success.

  Maybe it isn't a huge problem, because it does not work, I don't think it's good to keep it on all the time and wasting energy.

  Please let me know.

  Wing

  Thank you very much, printer is fixed, I can turn on and off, and even the wireless signal is back.

  Everything that fact

• Satellite L500 - can not turn on the new wireless network card

  I have little problem with client model T. Satellite l500-1ek. I change orginal at BCM94321MC wifi wifi card mini pci card (rev 6). Card works well - everything is ok - driver installed ok.
  But I can not turn on wifi with FN + f8 key - Windows.

  This isn't a software issue - this button should work before starting any kind of system, but do not work. I tried everything, including the update of the BIOS. Card works correctly, but can not turn on wifi: (.)
  Can anyone provide another solution than to change the map?

  PS.
  I have reinstaled value-added package and Flash utility support card - fn Panel works but buton f8 disappeared.
  PSP.
  I tested with another card from mnipcie and have same problem - can not turn on wifi - fn + f8 does not work

  Post edited by: Ipcur

  Hi Ipcur,

  Why you traded with another wireless network card model?

  He works with the wireless network card preinstalled Toshiba?

• XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon

  someone on this planet knows!

  XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon (it shows the IP etc. When hovered over with the mouse). tried fix & checked all the rest including the settings found on the masses of internet sites. don't think that this problem is so widespread and not final fix?. someone must know the answer. both computers have norton 360 v6. !. two computers use internet very well through the same network switch. two computers worked flawlessly again, no repairs, no reinstall, not zero other problems ever (always ran 360 and first market backup battery).

  Hello
  I recommend that you search/post this question on the link below:
  http://social.technet.Microsoft.com/search/en-us/?query=networking%20with%20Vista&refinement=112&AC=1
  b Eddie

• Icon phone blackBerry Smartphones BB torch 9800 does not turn?

  Why does the screen not turn when you are in the phone touchscrees icon?

  Also, how can I connect my phone to my laptop and use the telephone for the use of the internet for laptop?

  pspknox wrote:

  Why does the screen not turn when you are in the phone touchscrees icon?

  Because when it is used as a phone, it fits your ear in Portrait mode, where the "phone app" and call log work only in portrait mode. I know, sorta sill, but it's like that.

  If you want to inform RIM otherwise, drop an email... [email protected]

• Wireless network error (do not turn) even I did it?

  Hi, I turned ON my network without wire (with the switch on my laptop). No connection was detected (a cross has been posted in the signal bar). After that I did the 'repair' it not show my wireless network was not turn ON. I'm confuse or some conflict in the system?

  Help please! Thanks in advance...

  Hello

  Please contact Miceosoft answers.

  First, go to start-> type of performance information and tools-> click on Enter. In the window, click on "view and print detailed performance and system information. Windows that can be opened, access the network category. Search for the words WLAN or WiFi. Note the name.

  Then, go to start-> type devmgmt.msc-> press Ctrl + Shift + Enter. Click Yes if prompts UAC. In the window, go to Nwtwork adapters, expand it. Now, look for the name shown here. Select and double click it. In the window, under device status, if it is referred to as "this device is working properly", try retsrting the PC and if this fails, try updating the driver.

  If any other message appears as "the unit was able to start" or any other message, try updating the driver. If that too fails, contact the manufacturer, may be it will need replacement.

  See you soon.

• Laptop HP 15: Realtek RTL8188E does not turn off

  Have HP laptop, 15; bought with Win 8 but upgraded to Win10 earlier this year. Recently installed a number of system and driver updates from HP.  One of them was for the Realtek lan wireless (driver dated 13/10/2015;

  ver 2023.19.831.2015). Since that time, LAN will not turn off (light stays on) when you use Shutdown or Hibernate. A difficult start is necessary to extinguish the light of lan and restart the computer. It's a pain. I'm missing the need to change a setting somewhere or is this something that is going to require waiting for a new update for the Realtek driver?

  Hello

  Try disabling the startup of Windows 10 hybrid - you can do the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close windows open and stop the laptop by right clicking on the icon in Start Menu, select (Admin) command prompt and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Start the laptop and let Windows take over completely for a few minutes before checking if it is now shut down properly in the Start Menu.

  If this has fixed the problem, it may be useful by turning the quick start back on - sometimes simply remove and re-create the file will solve the problem.

  Kind regards

  DP - K

• Two issues here, 1st system restore will not restore, also wireless do not detect all networks

  Prob with system restore is everything goes well until the pc restarts, then get the restoration of of message without any changes have been made to your computer, this tent after several different restore points.

  The prob with connection Wi - Fi (intel pro 2200 bg) is it doesn't find any networks, pilot verified also that his permit, any help there ain't a pc wizz so any advice appreciated

  System Restore is not a panacea.  If this can help depends on what specific changes you want to cancel.

  Which leads to the question: what is is happened just before things stopped working?

  You do not mention if one of potential errors 13 to restore the system applied to you, or if none did, this error message you got when you tried to use the system restore.

  To do this:

  Tried the keys that turn off wifi nothing not even the light that says its /running activated

  say that the light associated with your wifi adapter is not turned on or off?  If Yes, I suppose that the light is 'off' now, correct?

  Further, I guess that the wifi card is internal and you have a portable computer.  What is the brand and model of your computer?

  Open the Device Manager (start > run > devmgmt.msc > OK)
  Click on the + sign next to "network adapters."
  If there is an icon of warning/error next to an entry, double-click the entry and to report to what appears under the "Device status" and "Use of the device" (both on the general tab).

  Go to network connections (start > run > ncpa.cpl > OK)
  Right-click on the icon for your wireless adapter and select Properties
  You will see a screen like this, and if so, is the on your box is checked the--> http://screenshots.modemhelp.net/screenshots/Windows_XP/Network_Connections/Wireless_Network_Connection/Properties/Wireless_Networks/Index.shtml

• 9.3.4 iOS alert tone calendar do not turn off

  Since upgrading my iPhone 5 to 9.3.4, I can not turn off the sound alarm for a calendar event.

  I have a Gmail calendar sync on my phone and all my calendar notifications are set as follows:

  Show in Notification Center > WE

  Sounds > None (alert sounds and vibrations are set to None)

  The app icon badge > WE

  Display the lock screen > WE

  However, the reminder time for a calendar event, I get an alert of the lock screen AND a "rope" carillon. I also tried to disable all notifications of reminders, but nothing is done, there is simply no way to activate sound alerts in the calendar. It wasn't the behavior of calendar on 9.3.3. Am I missing something?

  Another thing, that I discovered after the upgrade is that the captions under the buttons on the call screen are now highlighted. Is it because of the upgrade or some other setting?

  Thanks in advance for all the help and advice.

  Hi John,.

  Thank you for using communities Support from Apple. I know have a problem with notifications, it is not what you expect. If I understand correctly, you get a sound notification schedule even if this setting is disabled. Looks like you have tried to adjust some parameters already, so here's what I suggest for this problem:

  1 first, turn off the Notifications options for the calendar, and then restart your device under the tap down and starting process is important to keep the iOS software works correctly. Select the appropriate Notifications options and test this new:

  Restart your iPhone, iPad or iPod touch

  2. If you still experience the same behavior, I suggest to backup your personal data and then reset all the settings in settings > general > reset your device. This resets all settings on your device such as Notifications, which will have to be installed again after testing your problem of Schedule again.

  The backup of your iPhone, iPad and iPod touch
  Import photos and videos from your iPhone, iPad or iPod touch
  Reset iPhone - iPhone help

  See you soon!

• When I turn my iphone sideway, the video does not turn sideway

  When I watch the video on my iphone, I usually turn my iphone sideway, the video would turn sideways to get the most out of the video. But now it does not turn sideways.  Try to find the adjustment to set the option or the recent updated version this video sideway option removed.

  Swipe up from the bottom of the screen to get to the control center. Press on the icon of a padlock on the right side until it becomes black. If the icon is white, the screen rotation is locked.

• EliteBook 2530p. Can not turn on WiFi Windows 10

  EliteBook 2530p, Windows 10 home

  Ive just upgraded the machine above 10 win 10 with the help of this site. Everything works fine except one thing, I can not turn on WiFi.

  The orange LED on the touch screen under the screen and the front edge of the machine are both orange and when I try to use the touch screen to turn it on nothing happens.

  All other keys work fine so I don't think that's the problem. I don't know another way to activate the WiFi on this machine.

  The WiFi card is recognized in Windows 10 Device Manager and I have re-installed the card and made sure the antenna cables are properly connected.

  Anyone had similar problems with WiFi / Win 10 works is not on this machine model?

  Any help or advice appreciated.

  SOLVED

  I'm frustrated, trying to get the WiFi works because it is a machine I was in the process of selling and I had no user file to worry about, I decided to clean install Windows 10 and re - install Windows 7.

  I did this and load all nessasary drivers but no matter what I did the WiFi refused to turn on. I did several searches and HP Wireless Assistant who got the status of 'Wireless LAN' was OFF but the Start button is grayed out so I couldn't activate it.

  While remaining in the wireless Assistant I hit the WiFi button on the touch screen and a message appeared telling me to unplug my Ethernet cable. As soon as it is unplugged the button power on in the Wireless Assistant has become clickable and I was able to turn on the WiFi!

  So it seems that if you connect an Ethernet cable to this model of HP, the WiFi system is disabled and the only way for him help is by unplugging the Ethernet cable.

  I think I'm going to stick with Win 7 because I'm still not sure that the wireless card is supported under Win 10

• 4540 of proBook Wireless Driver not work... Unidentified network

  I just bought 4540 s ProBook (I7-3632QM)
  Product number: H5L54ES #ABV

  I installed windows 7 ultimate, with the help of this forum, I have installed all drivers, between the wireless network was working and I could browse the internet

  but after I have installed all the required drivers and Device Manager seemed well my dose of wireless network not working and says:

  Connected to the unidentfied number of internet Network Access and can not see my wireless network

  I tried the network (Wifi/Bluetooth) button, changing whilt light to yellow light mode and both modes work still do not

  can someone help truble shoot this question

  This can help others:

  I managed to solve the problem by installing HP Connection Manager, WIFI showed tuned out... I clicked the power button and Wifi again active.

  I really don't know what's happening at the back of this...

  I failed turn on WIFI directly from windows, which should not be the case... I solved my problem, but I'm interested to know how to control it without the HP connection manager.

  Thank you

• Excite AT300 not turn back to all

  Noticed these last days, that the battery icon was red with exclamation point, even if it has been fully charged and when you check in the settings it shows battery with 10 remaining hours information.

  The Tablet since acting very strange.
  From time to time, it starts to vibrate for a second cutting when your working on something and the other day, he is stuck in vibrate mode until I have shutdown and restarted.

  I have no sound now when playing music and videos and the time and date changes randomly too.
  I turned it on this morning and the date was set in 2005?
  I then reset the date and close, now it not turn back at all?

  Any suggestion or help will be appreciated with gratitude
  Concerning

  Are you able to perform the hard reset?
  For that you must press and hold the power button / stop and button volume up at the same time.

  The menu would provide a few options. One of them would be the factory reset.
  Give it a try.

• Wireless network not always connects successfully on HP ENVY 5644

  Just bought a new HP ENVY 5644 device to replace an existing of my HP Photosmart C4380. The new device for the first time and ran through the initial configuration using the built-in touch screen. Everything seemed to be going easily and smoothly, without any error and even connected to my home wireless network on the first attempt.

  I then tested the printing and scanning of the characteristics, which each provided extremely pleasant results and good performances on the wireless network.

  Unfortunately, this is where my story ends happy and boredom begins!

  After initially set up the device in a temporary location, I've properly turned off to transfer it to its final resting position. Even if it were in another room of the House, it was actually closer to the router of network wireless itself. In reality, we are talking about a very significant distance that the 2 rooms are in fact back to back each. So, now with her in her new role and connected to a power outlet, I turned on the device once more. The powers of the unit upwards and the blue light that indicates the status of the wireless connection, continually flashes blue rather than a blue fixed solid. Blinking blue indicates that the device is unable to establish a wireless network connection. If I use the touch screen to investigate the matter, I think there seems to be an authentication problem and the details of the message are bad password (WPA) wireless entered.

  Why has this happened? Nothing has changed, everything that I've done is not move the printer in another room!

  Believing that the touch screen tells me, I decided to run the Wireless Setup Wizard once more to confirm the wireless network settings. As expected, he manages to find my home wireless network without any problems and then requests the password key has been entered. I go so it correctly and press on apply. It is at this time that the device tries to connect to the network, that unfortunately crashes, return the above error message. However, I know that I entered the password correctly, in fact, there is an option to display the password that you entered before attempting the connection, which, while they inspected, confirms that the password that I entered is good!

  Then why does it not connect?

  I tried to turn on the wireless feature, turn off several times via the touch screen interface, but this has not solved the problem. The only way to get the connection Wireless online is to keep turning on the unit, switch off again until the wireless light solid blue. Without apparent reason, wireless seems to have a mind of its own, only connected to my wireless network when she wants to!

  I have no problems with many other wireless network devices I have in my house, from several manufacturers and even located in other parts of the House. I know that my wireless network is good and I know that my password wireless like the back of my own hand, so there is no chance of which is incorrect. It is purely a problem for the HP ENVY 5644 itself, device which can be confirmed by the fact that if I turn it on and turn it on again, it could decide to establish a successful connection even if I have nothing to its own network configuration, or my own configuration of wireless itself.

  Ask yourself whether or not it might be of some obscure incompatibility between my wireless router and the HP ENVY 5644, I tested the unit with another router to spare than I, who was also from another manufacturer but unfortunately the result is the same, the HP ENVY 5644 connected only when he wanted and would establish only the network connection Wireless when switching on the device. If the connection fails, it will never connect to the network unless you turn off and turn it back on, which may require even been attempted several times before success. Once connected, it seems to stay connected and then works really well.

  This behavior is not acceptable and I'm sure that's not too healthy for the device itself to be turned on and off again at these short cycles. Otherwise, overall, as I said earlier, I am very happy with the product.

  Can someone at HP tell me why this is happening or suggest what I need to seek or consider.

  Talked with HP engineer the other day. I explained to him what was going on and they suggested to do a factory reset and then set the IP address manually rather than using DHCP from my router wireless home.
  
  I wasn't too happy about it as everything has been well installation and work, except for the WiFi do not reconnect all power over. I also had a go better, adding a DHCP reservation in my router by using the MAC address of the printer. Indeed, it is the best of both worlds that the printer will be given the same IP address by the router whenever he asks for one.
  
  We agreed to leave things as they are rather than the reset of the printer and I would now turn off the printer every day. For the last 4 days, the printer has reconnected to WiFi at all power over. This is excellent news.
  
  I have a call on request with HP in the coming days to discuss how things are going. If everything continues as it is, it would seem that to specify that a wireless router DHCP reservation solves the problem. While I wait for the next call to HP, I continue to power on / off power to the printer on a daily basis.
  
  Watch this space!

• Pavilion dv7: Wireless does not work after upgrade to Windows 10

  After the upgrade to Windows 10 Wireless does not work, even if the wireless symbol F12 shows blue. In the network settings, the wireless switch exhibits & cannot be turned on to.

  This feature worked perfectly in Windows 7

  No worries.

  Thanks for the actual name of the product from your laptop.

  Let me take a look.

  I will edit this thread to let you know what I found.

  The Intel Centrino Advanced - N 6230 is a wifi adapter that is compatible with your book which has Windows 10 drivers available. the driver is on the following link.

  https://communities.Intel.com/thread/59710?start=0 & tstart = 0

  You can replace yourself because it is easily accessible after removing the cover of the hard drive Bay. See page 21 of the manual at the following ADDRESS.  http://h10032.www1.HP.com/CTG/manual/c02842278

  I saw them on eBay for @ $20.00 USD

  http://www.eBay.com/ITM/new-Intel-Centrino-advanced-N-6230-Wireless-WiFi-Bluetooth-combo-card-62230ANHMW-/170958962681