Wireless issues when it is docked

Similar Questions

• HP Envy 7640: Wireless issues when connecting to a VPN

  Hi all

  I just got this printer (HP Envy 7640) of my company. I work from home, I need to be connected to a VPN.

  When I connect to this VPN, my printer (wireless) does not work.

  As soon as I stop my VPN connection, all of my prints are made.

  How to solve this problem?

  My COMPUTER support explained to me that the only why do the job is to stop the wireless connection and use a USB connection.

  Do you have another solution?

  Also, how to change USB connection wireless connection? I found the solution on the other hand, but not like I need.

  Thanks a lot for your help!

  Kind regards

  Juliette

  Hello

  You can print to the printer from a computer connected to the same local network as the printer, by connecting to a USB port, you can print from the same local computer on the pritner, you will not be able to print from the remote desktop, the PC and the printer must be connected to the same LAN to print.

  You should be able to use the wireless on the other laptop, as long as this laptop is connected to the local network and the printer is connected too you can print on it, by connecting the USB cable, we did not unplug the pritner from the local network and therefore printing wirelessly from other computers on this network is available with no difference.

  Hope that helps,

  Shlomi

• Wireless mouse does not work when it is docked.

  I have a new laptop Latitude E7440, with a mouse Dell Wireless and E-series docking station.  When it is docked, the wireless mouse is disabled.  Receiver must USB mouse be connected to the docking station to make it work? It would be quite embarrassing.

  Thank you

  live

  Hi dwells1957,

  Thanks for the post! Looks like you might have the USB receiver connected to the USB ports on the back of the system? While anchored feature transfers E7440 of ports at the back of the unit to the Wharf (by disabling these ports).

  Rear ports Latitude E7440 & E7240 system are disabled when it is docked on an E-port I / II or E-port Plus I / II

  http://www.Dell.com/support/article/us/en/04/SLN290782/en

  If you connect the USB receiver on the dock or on the USB port on the side of the system, it should work correctly when it is connected to the docking station.

  Kind regards

• Satellite P750 - Wireless disconnects when wake the portable computer from the 'standby mode '.

  Hey

  Today, my Toshiba Satellite P750 (running Windows 7) has been disconnected from my wireless network when I wake from sleep mode. When I close the lid of my laptop, it goes automatically into mode 'sleep', and when I open it, I put my user password and use it as usual. However for some reason any today, it does not work.

  When I wake up, it recognizes my wireless network is available, however, cannot connect to it. When I solve the problem, it indicates that there is a problem with my router and I should turn it off, wait at least 10 seconds and then turn it back on. I tried this and it works fine, but my laptop has never done that (in the few weeks I got it) and I wouldn't constantly reset my router to use Internet. In addition, I have another laptop at home that works very well.

  Should be really this issue be resolved quickly as I have exams this week.

  See you soon

  Hello

  Maybe there is a problem affecting the IP automatically once the laptop has been in sleep mode. It could also be another reason for it but it of always difficult to say which could affect wireless networking

  I think you should try to update the Wlan driver.

  Don't know exactly what you have but here the card Wlan, you can find all the latest WLan drivers available for Toshiba laptops:
  http://APS2.toshiba-tro.de/WLAN/

  Uninstall the old drivers first, after new reboot install new drivers downloaded for the wireless network card that is built in Notepad.

• Satellite Pro A200 wireless issue sometimes disconnects

  Hello

  I have a Satellite Pro A200 with a wireless issue.
  I use home wireless. Every now and then while surfing it won't find the page. I try to connect via my VPN connection I have for the office.
  If you click Cancel, it will sometimes continue surfing very well but sometimes can not find the page.

  I disabled the wireless and connection is used hard and no problem.
  It would be desirable to re - install the drivers for the wireless?
  I think I've removed the software toshiba Wireless thing (forget his name) when I got it.
  So maybe that's the issue.

  Any help would be apreciated.

  Thank you

  Of course, it would be desirable to update the WLan driver in most cases it s WLan compatibility issue between card WiFi and router

  I recommend updating the driver WLan and also you can update the BIOS if a new version has been available for your laptop model

  Best regards & good luck

• I have a HP 620 laptop computer and a printer OfficeJet 4500 wireless. I can print wireless, but when I go to HP for Solutions to scan a document, it tells me that the printer is disconnected.

  I have a HP 620 laptop computer and a printer OfficeJet 4500 wireless.  I can print wireless, but when I go to HP for Solutions to scan a document, it tells me that the printer is disconnected.  There is nothing I can do to Solutions of HP to recognize the printer.  What causes this problem?

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP - OfficeJet 4500 Wireless - drivers<- set="" to="" your="" version="" of="">
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3986399&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP - OfficeJet 4500 Wireless - support and troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=3986399&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My laptop connects is more to the internet, either hard wired or wireless. When it is hard wired, the laptop displays connection but I can't access the internet, and I've done it before.

  My laptop connects is more to the internet, either hard wired or wireless.  When it is hard wired, the laptop displays connection but I can't access the internet, and I've done it before.  My other computer has service very well (or I wouldn't send this message) I checked everything, what to do?

  original title: internet connection.

  Hi vonhatten,

  1. Did you the latest changes on the computer?
  2. You receive an error message when you try to connect to the internet?
  3. You have security software installed on the computer?

  Refer to the article below and try the steps mentioned, check if it helps.

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

• How can I change the PC than the 6s iPhone more synchronizes to, both wireless and when the iPhone is connected?

  How can I change the PC than the 6s iPhone more synchronizes to, both wireless and when plugged in? I recently upgraded my PC. I have restored my backup of iTunes on the new computer and it works fine. The iPhone, however, is waiting to synchronize wirelessly to the PC that I no longer use, and iTunes does not recognize my iPhone when I plug.

  I came across this problem recently and had to talk to Apple

  If you mean the computer name listed in the settings - iTunes WiFi - Sync

  Then, it's exactly what I'm talking about

  I had to not reset my - no joke - general - reset - Reset all settings - no content has been damaged and there is NO need for a restore

  Lost among others

  All my WiFi passwords

  All of my alarms

  All my preferences of location services

  BUT he did remove the old name of the computer from there

• HP Envy 17-j053ea (E7A75EA) wireless issues

  Hello

  HP Envy 17-j053ea (E7A75EA) wireless issues

  Very slow performance on wireless and many drop-outs.  Don't you this problem with other laptops, etc. It doesn't matter how close to the router that I am.  It is virtually unusable.  Netwrk cable is very fast, this laptop is fine.

  I updated the bios to the latest version.

  Wireless device is Intel Centrino N2230 network card. It runs the latest driver - version 15.10.0.11

  Any help please it's driving me crazy?

  Thank you

  Malcolm

  Hello

  The latest drivers still does not work.  Finish I swapped out for an Intel Centrino Advanced - N 6235, which works perfectly and is steady as a rock.

  Too bad that I had to do it on a new computer laptop well!

  See you soon,.

  Malcolm

• Tecra A10 - how to disable the fingerprint reader when it is docked

  Hello

  I use a Tecra A10 with a 2 Express Port Replicator.
  How can I disable the fingerprint reader when it is docked and still use it when undocked?

  Thanks for your help

  Hello

  As far as I know that something like this is not possible.
  Following this logic, it will be possible to have access to protected files when the laptop is on docking station.

  Either you use fingerprints or not.

• Tecra 8000 TV out when it is docked

  The docking station for the doen't Tecra8000 replicate the TVout connector, but I have a cable to right angle that matches the TV normal port when connected and allows the cable out the host unit. TV connector normally output is disabled when it is docked and is there a setting in the registry or something in 98SE to re - activate?

  I connect my Tecra to a TV to watch DivX movies on the big screen, with the audio goes to my stereo, but I need to use the device with the Replicator, because the server containing my video files on a network, so I need the capacity of the network. I COULD use a network adapter, but then that beats the purpose of a docking station with the LAN!

  Retro Hi

  I'm a bit confused. As much as I know some Tecra 8000 have no LAN card. If your camera has card LAN and LAN port why you n t plug it directly into the TV and LAN without Port Replicator?

  I'm not sure if the port is disabled, but you can test if you can 100%. If there is no success, you must use the PCMCIA network adapter.

  Good bye

• I'm trying to get my laptop to go wireless and when they ask me the key code to my internet source, that it keeps an incompatibility

  I'm trying to get my laptop to go wireless and when they ask me the key to my internet source code it keeps incompatibility is my question were can I find the key code

  Hello

  The password is set in your router. Check with the router manufacturer as most have excellent
  online help to set a password as well as connection to the router. Also check in
  their forums (if any).

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  Hello

  With Docking Station, you can connect all the cables for printer, keyboard and mouse, adapter directly to the charging station.

  So whenever you use a laptop, you have just dock the laptop on the docking station and not need to re connect all cables again.

  This will help you when you move frequently with the laptop.

  Docking station will save your time, outside any other aspect, that it has to offer.

  Zaki.

• EA6500 - Wireless issues, possibly related to the leases Varied?

  I am passage of router Netgear WNDR, and this EA6500 V1 really gives me some very minor, recurring wireless issues.  I have to assume its ties to certain parameters, I'm just not see.

  My laptop will lose just an internet connection.  The connection to the router is still strong, but I have to follow the troubleshooting for Win7, it restarts the network card in the laptop and its good once again.  Then a random amount of time later, he'll do it again.  Seems to happen a lot more, I'm of the router, as in the night, the laptop comes on the floor, I'm leaving 5 bars 3 (speed is little unchanged) and I will have 4 or 5 of these occurrences.

  Wireless printer is really been a pain with this.  Since the 430W brother I can find and easy access to the home network.  From there its been sporadic at best.  If I connect to the router (immediately after Assembly), I can see the printer and its Online.  Research on a laptop computer in the House he won't find it.  If I just leave or make several reboots it will come back.  I add, print a test page and everything is fine.  The next day, the printer is in offline mode on the router and is not reachable.  On the printer itself, that it believes its fine.  If I remove the device, and then restart the printer and do everything again I can find it, but only for that day there.

  The laptop computer and the printer are on the notebook 2.4 Ghz network join on n 150Mbps.  I added the printer of the demilitarized zone and increased maximum rental period that the field would allow.  Always without success.

  Any ideas?  With the old router that the printer wireless joined the day we bought it, and two years later, he was still active and had never been restarted.  Even with the laptop.  Its about 3 years and I have never had to restart the internal card like that.

  For now, I went back to Netgear but I'd like to get the EA to work if I can so I can give my old router to my parents.

  Thank you!

  Ryan

  If you have a wired connection stable, this challenge can be because of wireless interference. Try changing the channel wireless 1, 6 or 11.

  If the wired connection is not as stable and as long as you have a stable connection directly to the modem, clone the MAC address of your computer on the page of configuration of the router if you have a cable internet connection. For Linksys WiFi Smart, go to connectivity > Internet settings > enable MAC address Clone > Clone My PC MAC > Apply. For the classic web interface, see this link.

• Performance issues when coming out of sleep

  I recently built a gaming PC. On Christmas day, I finished putting the thing together. It has an Intel i7-4790 CPU running Intel HD Graphics, 8 GB of Corsair Vengeance RAM, an Asus Z97 - A Mobo and a 2 terabyte Seagate HDD. I installed Windows and put everything in place. Then a week later, my MSI GTX 970 arrived in the mail.

  So, I take the thing to sleep and decreases the performance of the whole thing. Videos YouTube stutter, simple as games fight of World of Tanks to run at its usual rate of 60 fps. To avoid this, I simply restart my comp and then it works fine. performance is back to normal.

  A few weeks, Windows gave me a message on one of the Nvidia drivers causing performance issues when you wake up from sleep. I don't think a lot of it and rejected it. I'll try to reinstall all my Nvidia drivers. I uninstall the Intel HD graphics driver a few days ago and has not changed anything. I would appreciate an answer to this problem because I would like to continue to use the "sleep mode" because it consumes less energy and prolongs the life of my case of LED. Thank you!

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask

  
  

  Please run the trace when you encounter the problem