Wireless keyboard not working not properly

Similar Questions

• wireless keyboard stopped working without warning.

  Original title: wireless keyboard stopped working without warning.  I use my keyboard to touch screen which is very uncomrfortabe for me.  Any ideas?

  Windows 8
  Computer and the keyboard is less than one year

  Remove rear USB Monitor and re - lower corner insert. It worked for me.

• Wireless keyboard 700 works do not at all

  I bought a keyboard and wireless mouse 700 v 2.0 and they worked very well but the keyboard stop working not at all. I changed the bateries, but it does not work. Is there a system of locking or a special button that will prevent her from work that I don't know? Help, please!

  Hi Lady in pink,

  1. you remember to make changes to the computer before this problem?

  You can consult the following Microsoft KB article and check if it helps solve the problem >

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Wireless keyboard not working anymore... wireless mouse still works.

  My keyboard just stopped working for me while I was typing... put batteries in... reset... pulled the usb dongle... He... moving mouse and keyboard use the same dongle... mouse continued to work... any ideas? Thank you.

  can help...

  What they don't tell you in ANY textbook, is that the blue light on the USB receiver is actually a reset button!  With the receiver plugged into a USB port, I pushed the button/light until he began to blink.  What would you like to do next is to press the blue button (unlit) on the bottom of the keyboard until the blue light on the receiver STOPS flashing.  At this point, my keyboard started working again, and the mouse was fine.

• Why my wireless keyboard stop working when I put new batteries in? There is no power in the keyboard now.

  What to do when my wireless keyboard will not be running once I put in the new batteries?

  I probably try different batteries in first and be sure that they are installed according to the polarity.

  I'm not trying to be funny, but the power button was depressed, correct?

  Barry

• Wireless keyboard not working not properly. (Microsoft Wireless MultiMedia Keyboard) (SOLVED, CHECK MY ANSWER)

  Hello, I replaced my monitor, but my keyboard did not work properly and when I spam a letter as "aaaaaaaaaaaa" very long, it stops and I have to press it again. Can someone help me? I have the same situation in a game when I'm pressing certain keys that I have. It is very annoying... So I posted here because my keyboard and mouse are both of Microsoft,

  Microsoft Wireless MultiMedia Keyboard 1.1

  Microsoft Wireless Optical Mouse 2000.

  I would be very appreciate all solutions on it: P

  I tried putting in new battery, restart, re - detect the mouse and keyboard but did not work!

  Solution:

  Put your detector near the keyboard (or right in front of him), as I do

  It worked perfectly. I also tried to hand over to the old place, and the problem appeared. So I put it in front of the keyboard and the problem disappeared!

• Erk - 321 has keyboard: HP Envy wireless keyboard only works after a reboot, but not at initial startup. Envy all in one office.

  Hello, for some reason, my keyboard is not working whenever I'm doing a restart. Or turn on for the first time after a stop down. The only keys that work are the volume keys.
  
  But if I restart by connection or desktop screen, the keyboard works fine.
  
  The batteries are not dead, I replaced the.
  
  Any info would be great. Thank you.

  I have HP Envy Beats all-in-one.  Mouse worked, keyboard no longer works unless after withdrawal of the driver for keyboard then rebooted.  Would work for this next boot, solved by disabling fast-start-up in power options, the theory is computer starts jumped linking or simply crossed it faster that the keyboard can answer.  Hope this helps you.

• volume and switch wireless keyboard not working - HP Pavilion Entertainment Notebook dv4

  HP vp190av

  Windows 7 32 bit

  Unable to work with my key control board volume and wireless switch

  I formatted my laptop and UN able to find the solution to this problem

  Hello:

  You probably need to install this software for volume control.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-84862-1&CC=US&DLC=en&LC=en&os=4062&Product=4121226&sw_lang=

  You may also install this for the wirless work.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-84194-1&CC=US&DLC=en&LC=en&os=4062&Product=4121226&sw_lang=

  The driver is installed for the wireless card?

  Y at - it all devices listed in the device with a little yellow Manager! brand?

  If so, please post the hardware ID's for one of these devices see you like that.

  If you don't know how to find the hardware ID, please read the info on the link below.

  http://www.DeviceDriverFinder.com/blog/device-drivers/how-to-check-the-hardware-ID-for-a-Windows-device

  Paul

• wireless keyboard stopped working in bootcamp

  I El Capitan, up to date, I have dual boot in windows 7, I get the Standard Apple Wireless no num keys. Worked fine nothing today, Friday. I does no change from there so far I tried already to re-downloding and installing bootcamp readers, no luck.

  Any idea

  Seems that the simplest solution is that I have not tried. I simply removed the Windows and re-paired, fixed keyboard.

• HP Pavilion g7-1365dx: wireless keyboard does not work.

  I have a combination and connected mouse microsoft wireless keyboard to my laptop.  The mouse recently 'died' and replace the batteries with new Energizer batteries did not help.  I bought a new Logitech mouse and installed the new USB connector and the mouse worked flawlessly.  However, the wireless keyboard does not work now.  If I reinstall the 'old' or the original USB, the wireless keyboard connector works fine.  The new mouse does not work with the original USB connector.  So now I have two USB connectors that are connected to the computer to make the functional keyboard and mouse.  Is there a solution to eliminate one of the USB connectors?  I realize that the brand of the mouse and keyboard are different.  This is the problem and if so can it be fixed?

  CJB - 10 wrote:

  I have a combination of microsoft wireless keyboard and mouse connected to my laptop.  The mouse recently 'died' and replace the batteries with new Energizer batteries did not help. I bought a new Logitech mouse and installed the new USB connector and the mouse works perfectly.  However, the wireless keyboard does not work now.  If I reinstall the 'old' or the original USB, the wireless keyboard connector works fine.  The new mouse does not work with the original USBConnector.  So now I have two USB connectors that are connected to the computer to make the functional keyboard and mouse.  Is there a solution to eliminate one of the USB connectors?  I realize that the brand of the mouse and keyboard are different.  This is the problem and if so can it be fixed?

  Hi ECJ-10,

  Well, you answered your question yourself. They are different products, so you need 2 USB receivers.

  The alternative is to get a replacement of microsoft mouse if it is still under warranty, they usually do.

  Hope this helps.

• Upgrading from MS done my wireless keyboard work correctly

  MS installed an update on my machine, don't know that one right now, but the update resulting caused my (MS Wireless Keyboard 6000 v2) wireless keyboard stop working properly. I replaced the batteries, went through all the basic troubleshooting steps without consistent success. A few things authorized feature intermittent but nothing solved the real problem. The symptoms are: intermittent connectivity, typing errors (IE if I input 0 exit is entered or 0 j out ;) constant output without entry jl (that is, if I get a browser open, sometimes it will boot just out of a string of 1 in the scope of available data).) A few times the mouse failed. But especially the keyboard. Thanks in advance.

  Hello

  Step 1: Check the updates installed in the history of the update and send back the same.

  1. Click Start, click all programs, and then click Windows Update or Microsoft Update.
  2. on the Windows Update Web site or the Microsoft Update Web site, click on view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.

  Step 2: Run the fix it tool to the article below and check out them.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  Step 3: Check if the article helps you fix this problem.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard
  http://support.Microsoft.com/kb/838398

• Microsoft Arc Keyboard not recognized by the keyboard software

  Hello

  I recently bought an arc keyboard. Although the keyboard works fine, it is not recognized by the software intelitype.

  When I run the software (downloaded from the support section of the arc keyboard), the key settings tab says "no keyboard microsoft usb not detected"

  The Hardware tab says:

  "HID keyboard device.

  Manufacturer: (Standard Keyboard)

  Location: On the Microsoft Hardware USB keyboard

  Device: This device works correctly

  ***

  This is a wireless keyboard, it works, but I can not find a bluetooth device that is associated with the wireless.

  Reinstall the hard and software do not solve everything and I could not find a solution on the web.

  I am running Windows 7, 64-bit.

  I could use some help here!

  Thank you

  Hans

  Hello Hans,.

  Thanks for posting your query in Microsoft Community.

  I understand that the IntelliType software is not able to detect the keyboard of the CRA. The question could arise for various reasons, including a faulty hardware, damaged driver etc. I would suggest trying the following methods and check if they help to solve the problem.

  Method 1:

  Run the hardware and devices troubleshooter. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.
  Open the hardware and devices Troubleshooter

  If the issue still not detected or resolved, proceed to the next method.

  Method 2:

  I suggest you try to install TWO software provided for Windows 7 in the following link of support for Microsoft Arc Keyboard. Check if the keyboard is detected.

  Microsoft Accessories: keyboard Arc

  If the problem persists, I suggest you refer to the following article which allows troubleshooting of common keyboard problems.

  Troubleshooting: keyboards

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• A wireless keyboard with 2 receivers work?

  A wireless keyboard will work 2 computers with the right wireless receivers?
  Ive got a 5000 wireless with USB receiver?
  If I buy just a wireless mouse that will work I have what I need to try and buy another set of 5000?

  Thank you

  D

  Hello Mk2madman,

  Thank you for your message.  Yes, if the receiver is the same on both machines your keyboard and your mouse should work.  You will most likely need to connect them by pressing on the (synchronize or connect) button on the keyboard and the mouse, otherwise, it should work.  To be completely safe, however, you can check with the hardware manufacturer to ensure that it is possible with these specific products.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Wireless keyboard 6000 v 3.0 Enhanced F keys work not properly.

  Just bought a Wireless Keyboard 6000 v3.0 installed the software on my Vista 64 bit system with Service Pack 2 installed and everything seemed OK until I came to use the features of the F1 to F12 keys.  For example when wishing to print a MS Word 2007 document pressing the F12 print key it refreshes the save box.  Press F11 which is recording key nothing happens, when you press F10 to spell check a series of small boxes with letters and numbers appear on the Word tab bar.  Checked the settings in the control panel for keyboard, everything looks OK and checked the settings of the tab key that once again apears so that these keys correctly assigned. Checked and keyboard software is up-to-date. Any help would be appreciated on how to get these keys work correctly.

  Hi DavidRodgers,

  ·         Have you tried to connect the keyboard on the other computer?

  I suggest to check the following link and follow the steps in the Microsoft KB article in the order that they appear to solve the problem:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  I hope this helps!

• my wireless keyboard does not work on the letter and number keys.

  It seems to be connected to the computer, because it does not work on the control button and snooze sound

  Hello

  -Have you made any recent hardware / software changes prior to this question?

  -What is the brand and model of wireless keyboard?

  Method 1: run the hardware troubleshooter.

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: update a hardware driver that is not working properly

  (a) open Manager devices by clicking the Start button, click Control Panel, click System and security, and then, under system, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  (b) in the list of hardware categories, find the device you want to update, and then double-click the device name.
  (c) click on the driver tab, click Update driver, and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: resynchronize your device with the receiver
  
  To resynchronize the mouse or the keyboard with the receiver, follow these steps.

  Note When you synchronize the mouse or the keyboard le clavier with the receiver, place the device near the receiver and store other keyboards and wireless mouse at least 6 feet.
  1. press the button on the receiver and check that the light on the receiver starts flashing.
  Note Some newer devices from Microsoft are subject to their receiver and cannot be reset. If your device has a button, go to method 2.
  2. If a dialog box appears on the screen in seconds, follow the instructions that appear on the screen. Otherwise, continue to the next step.
  3. press and release the Connect Channel button on the bottom of the mouse or the keyboard.
  4. check the green light on the receiver. A continuous green light means that the synchronization was successful. If the problem persists, repeat steps 1 to 4.
  5. for the Wireless Notebook Mouse: this issue can occur if the micro-switch on the bottom of the mouse is not released. Use a PIN or pen to try to release the button, if it is pressed.

  Hope this information helps.