Wireless laptop running Vista 32 and wired desktop under Vista 64 can access Internet, but not each other!
My laptop Vista 32 unreal access router and ping its own IP address, but no access to Vista 64-bit Wired Office with ping or try to access folders shared I place some months ago and used without problem until about 2 days ago. I recently did a restore of the laptop but it worked after that and I adjusted all the settings. I have Net bios over TCP/IP enabled on both machines. I have two machines on the workgroup and file sharing is enabled on both. Vista 64 desktop computer can access the Internet but can not access the shared folders that I put in this PC! He cannot ping the router either but can be accessed via the routers Web page. The router is configured correctly as well. I became a master browser errors on Vista 64 desktop until I changed the registry on the laptop off car with respect to the list of servers. I'm a computer technician with networking experience, but am confused on this one. There are so many problems over there near the mine, but they usually have xp machines trying to access Vista or vice-verse. In addition, they cannot access the Internet generally. If anyone out there has any intelligent suggestions I'm desperate, but know that I have this research completely so guess I did all the basic troubleshooting to save time you and me. Thanks in advance to anyone with advice!
Rick Saunders
12-09-2010
Hey thanks for getting back to me, I wanted to let you know that I could solve the problem! I'm not sure excatly what the problem was, but I went and bought a fixed register a program so that I paid for, as you no doubt know the free just ruin your machine more than it is useful, well I ran that and restarted and BOOM! Now even if I can connect to each computer and the internet. I'm still not able to ping? Now when I say that this is not so much genral, the laptop I can ping any name of site Web and number but not the PC. On the PC I can ping its own IP address but not the router or laptop? But it has no bearing on anything so I anticipate leaving me well enough alone. I how ever to download a graphics professional ping program, but not to worried about it! Thank you so much for you help and if I need more help, I hope you are avalibale!
Rick Saunders
The coach of the computer, LLC
Tags: Windows
Similar Questions
-
Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?
Hi Jer9009,
Welcome to the Microsoft answers site.
· Could you give the exact error code or error number you get?
To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.
A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.
For more information, see the link: create a network bridge:http://windows.microsoft.com/en-US/windows-vista/Create-a-network-bridge
Add a connection to a network bridge: http://windows.microsoft.com/en-us/windows-vista/Add-a-connection-to-a-network-bridge
Swathi B - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
When I start my laptop (running vista 32-bit) upward and the connection, get this error message "error loading c:\users\Appdata\Local\Temp\sshnas.dll".
Hello
Download update and scan with the free version of malwarebytes anti-malware
http://www.Malwarebytes.org/MBAM.php
You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes
http://www.bleepingcomputer.com/download/anti-virus/rkill
If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
-
Viruses such as the behavior of the Acrobat Reader software. I have a laptop running WIN 7 and kaspersky AV. yesterday when I started my laptop I see all the icons from the browser on my QuickStart bar have been changed to the adobe reader icon and also observe that many other programs on my desktop have changed to the adobe reader icon. If you click the icon it opens adobe reader. I deleted Adobe reader using Add or remove programs and the icons back to normal. Yet once, I downloaded and installed Adobe reader 11. the problem has resurfaced. then again, I've uninstalled adobe reader software and installed Adobe Reader version 10 with the same question back. I have now uninstalled Adobe Reader. Please advise on how to install a working copy Adobe reader which will not infect or impinge upon other programs in my laptop.
Hi imoorthy,
Please follow the troubleshooting steps mentioned in this document KB Application, file icons change in Acrobat/Reader icon.
Kind regards
Nicos
-
When I close my laptop running 2 files and when I do the closing and after that I open the screen is white... what I need to do?
Hello
Let us try these methods and check if that helps.
Method 1.
You can try the last good known Configuration and check if that helps.
Using the last good known Configuration: http://windows.microsoft.com/en-in/windows7/using-last-known-good-configuration
Method 2.
You can use the restore points for Windows 7 to return to a previous state, when your computer was working properly.
System Restore: http://windows.microsoft.com/en-us/windows7/products/features/system-restore
Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.
Let us know if you need assistance with any Windows problem. We will be happy to help you.
-
my mother has two computers that are running windows 7 and she wants to give me one of them, but it first wants to transfer or share all his stuff from one to the other. We network cables and such can I connect the on computers and share information from one to the other?
Hello
To connect two computers with a cable, not a router, it must be a crossover cable.
These are special cables, but they are not expensive.(You can configure a network or a host group (see below))
Connect two computers using a crossover cable (XP - Windows 7 may be the same)
http://Windows.Microsoft.com/en-us/Windows-Vista/connect-two-computers-using-a-crossover-cableIt is a description however computer stores will sell them at low cost.
http://en.Wikipedia.org/wiki/Ethernet_crossover_cableAmazon - example of a crossover cable
http://www.Amazon.com/Belkin-components-CAT5e-crossover-cable/DP/B000067RFT--------------------------
You can also use Easy Transfer
Transferring files and settings: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/transferring-files-and-settings-frequently-asked-questionsHow Windows Easy Transfer makes setting up a computer easier?
http://Windows.Microsoft.com/en-us/Windows7/how-does-Windows-easy-transfer-make-setting-up-a-computer-easierWindows 7 Easy Transfer
http://Windows.Microsoft.com/en-AU/Windows7/products/features/Windows-easy-transferHow to get an easy transfer cable
http://Windows.Microsoft.com/is-is/Windows7/how-to-get-an-easy-transfer-cable------------------------
These should help:
Create a homegroup
http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroupHomegroup from start to finish
http://Windows.Microsoft.com/en-us/Windows7/help/HomeGroup-from-start-to-finishAccess to files and printers on other homegroup computers
http://Windows.Microsoft.com/en-us/Windows7/access-files-and-printers-on-other-HomeGroup-computersFile sharing essentials
http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentialsShare files with anyone
http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone=========================================
More help at these locations: (Vista references also apply to Windows 7)
Vista - LAN
http://www.onecomputerguy.com/Networking/vista_network.htmVista network and sharing Center
http://www.onecomputerguy.com/Networking/vista_network_sharing_center.htmSetting up a network home
http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-networkHome network, wireless network and computer networking Made Easy
http://www.home-network-help.com/Windows Vista tip: How to install and connect to a wireless network
http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.htmlNetworking tutorial home
http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
Practically networked - everything you could possibly want to know.
http://www.practicallynetworked.com/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
My laptop (Dell Inspiron only 3 months old) is displayed on an external monitor, but not on the laptop screen. I am running Windows 7. It was running and display very well last night. When I turned on this morning the monitor lit up but show just a gray-white screen and no office. When I attached an external monitor, I could see desktop and all other programs and Windows 7 routines seem to work very well.
MBPress the Windows logo key and the p key, and then set up the PC to display on the built-in monitor only cycle through with the arrow key. You can make this Store if you want - key Windows-p, right arrow once, paused for a few seconds & the laptop monitor should then appear normally.
You can do so at the end of each session using the external display while you are ready for the use of the laptop on its own later.
-
Dell Inspiron Laptop with Vista installed at the factory does not start.
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas: Dell Inspiron Laptop with Vista installed at the factory does not start. The display shows
Indicator of treatment MM061 series white 80% in all of the BIOS revision A13 treatment indicator always goes to the same place and stops. I tried to tap the F8 key, but nothing happens.
If you used Dell or the recovery Partition recovery disks to restore the system, you must talk about Dell problem because it's their software - not Microsoft. We don't know what's on it or its operation. We have no information to help us help you. You need to deal with them.
Sorry we can't be more helpful.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
i, m on windows vista 32-bit basic family and I m under IE 9. Windows Defender does not level
Hello
If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.
There is nothing to worry.
Using both programs at the same time can cause system conflicts, etc.
If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):
"Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.
Right click and select Properties , ensure that Startup Type is automatic.
Once modified, click apply and OK.
Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"
.
If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:
http://www.Malwarebytes.org/products/malwarebytes_free
And for now, change startup Vista programs without using Defender, use one of these methods:
"How to use MSCONFIG in Windows Vista"
http://netsquirrel.com/Msconfig/msconfig_vista.html
Or the program Autoruns for FREE:
"V11.21 Autoruns for Windows"
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902
See you soon
-
C6350 printing from a laptop, but not the other
Hi, I have a new HP Photosmart C6350 which was working fine until today. I connected via the network from my wireless for two two laptops running vista 64. All of a sudden I can't print from a laptop computer but can print fine on the other. With one that does not initialize the print job, and then a minute later, it says "Unable to print Document" when I open the HP Solution Center, it says "work has not print because of an error in the printing system." The laptop is able to communicate with the printer, it can check the connection settings, get ink levels, scanner works very well, etc., but never print jobs is completed.
I tried to turn on/off the printer several times, I rebooted my laptop several times and it has not solved the problem. I checked the edits, and he said that everything was up-to-date. I tried all the solutions suggested and don't know what else to do. As I said, it worked fine til today. Help, please
Too bad, solved with the help of cat online hp
-
I can create it but not the NAME of a new folder... any suggestions? Or as the administrator or user, even when the user is an administrator. GACK! This is new behavior, week or two... Vista SP2 Marty
Hi Marty_McGrath,
I suggest that you want to run the file system (CFS) Checker scan that might help you to solve the issue.
To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.
To run the System File Checker tool, follow these steps:
1. Click Start and type cmd in the box start the search.
2. right click on cmd in the list programs and then click Run as administrator.If you are prompted for an administrator password or a confirmation, type your password or click on continue
3. at the command prompt, the following line, and then press ENTER:
sfc/scannowWhen the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool.
Follow the instructions in the link below for more information on scan SFC.
http://support.Microsoft.com/kb/936212/Check whether the problem is resolved.
If this does not work, you can try to create the new user account by following the instructions in the link below and check if it works.
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profilePlease post back and let us know if it helped to solve your problem.
Kind regards
KarthiK TP -
HP Photosmart 6510 series connects to the network and Internet, but not the computer.
Hey all,.
I have a desktop H8-1228 and 6510 e - printer. I got both products at the same time. I did the initial installation, and everything worked perfectly. I was able to print of my HP Touchpad (the printer was on the floor and my Touchpad was down.). Recently, I made a trip for two weeks. I turned off the printer. This seems to have been a mistake. Now, he will only contact my network and Internet, but not the computer. The Setup program keeps telling me that it is 'Impossible to find the printer' and that he wants me to check the IP address of the printer. I did this many times by printing the HP's Configuration Page from the printer screen. I also used Windows "Add a printer" without success.
I have installed and uninstalled the software several times; every time that remove the icon of the printer and the Standard TCP/IP port in the "Devices and printers" section in Control Panel. A few minutes earlier, I used Regedit to delete any reference to the series of HP Photosmart 6510 in the registry, believing that it could help my situation. There can be no. :-( I did the installation with the same problems that I had all the other times that I tried to install it.
No help from you the printer experts will be greatly appreciated. I'm not a novice as you can see. This situation, however, launched my posterior. :-))
Hi old_geekster,
You may want to enable disable all startup programs in msconfig until you are able to access the Web integrated printer server. It seems that there is something in the communication with the printer's operating system blocking. It will most likely software firewall or security related.
HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.
I would like to know what are the errors you receive?
-
Is it possible to run Safari7 on 10.7.5 OSX? I can't upgrade the software of other system on my Mac.
N °
(143905)
-
I am unable to send attachments in outlook express. HTML is selected and is therefore 'send pictures' recipient receives the text but not images?
All security settings seem fine, an idea?Some messages do not conform to the standards of the Internet in the sense that they cannot be returned intact by their transmission. The way around this is to use Message | Until the attachment, then they will be properly transmitted, since they will be attached.
Steve
-
I get a message saying "you have exceeded your profile storage space. Yet all the files listed th are actually my docs and application data. How to delete my profile, but not from my pc? increase the max profile size
1. the first thing to do is to make sure that the computer is completely virus/malware-free. Googling around this error produced quite a few links where the posters were or had been infected with Spyware Protect 2009 rogue.
http://www.elephantboycomputers.com/page2.html#Removing_Malware
Once the scanning is complete (do not skip the preparatory stages no more), if the problem persists:
2. double-click on my computer, right-click the icon for your hard drive, click left to get its properties. If you see options to set Quota management make sure that they are disabled.
3. in the case - BUT ONLY AFTER YOU ARE sure THAT THE MACHINE IS MALWARE/VIRUS-FREE - copy the lines between asterisks (not including the asterisks) below and paste it into Notepad. Save as undopolicy.reg somewhere, you will find. And then double-click the .reg file, that you have just made to melt in your registry. I hope that this will take care of the issue.
*****
Windows Registry Editor Version 5.00[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
'EnableProfileQuota ' = -.
'ProfileQuotaMessage ' = -.
"MaxProfileSize" = -.
'IncludeRegInProQuota ' = -.
'WarnUser ' = -.
'WarnUserTimeout ' = -.
*****MS - MVP - Elephant Boy computers - don't panic!
Maybe you are looking for
-
restoration of old favorites but keep the new aswell
I would like to recover my old favorites that I know how to do but I want to keep the new I have to side with those
-
In a small rectangle just the word Omniture. According to what you are doing as another word can come in this rectagle as Unica, Google Analytics, etc. I consider this is a spy, what I do and this behavior I want to stop.
-
Application is written in php and javascript. Clicking a button triggers a javascript confirm dialogue. Since upgrading to Firefox 9.0.1 confirmation dialog box does not appear. Trainer first set to allow the full domain of the application, then off
-
How can you tell which iphone version you have?
I need to get a new screen protector, but I don't know what version of Iphone that I have. What happens in the serial number indicates the model?
-
Just set up a new TP today and get the message that HP App Catalog do not download. It is down or is the problem with the TP? BTW, I tried the trick on by clicking on the yellow! in software update, but no joy. Now, I have only a black screen open fo