Wireless Mobile Mouse 1000 matching question

Similar Questions

• Mobile mouse 1000 wireless problem

  I have Microsoft Wireless mouse 1000, I used it on more than 6 months but now its not working, when I try to connect the usb key to one of the ports on the computer it show me error this device is not recognize and dysfunction. will you please help with this thank you

  Hello

  
  1 - is a 32-bit OS or 64-bit?
  2. What is the edition of Windows that is installed on your computer? For example Windows 7 Edition Home Premium, professional.
   
  Method 1:
  
  Try to connect other USB devices to the port and check if it works.
  
  Method 2:
  
  Connect the mobile mouse 1000 wireless to a port on another computer and check if it works.
  
  Method 3:
  
  Download all drivers available from the following link
  http://support.Acer.com/product/default.aspx?modelId=2167
   
  Check if it helps.

• Wireless Mobile Mouse 6000 has no light, so unfit to work.

  Hi, I recently bought a Wireless Mobile Mouse 6000. After that I installed the driver, inserted a new battery, the slight mouse still does not turn on and if it doesn't work. He said however, "the driver has been installed and working properly.

  Solutions to solve this problem is highly appreciated. Thank you!

  Hello

  You can view these methods:

  Method 1:
  Please refer to the provided Microsoft articles below and check if the steps help you solve the problem.

  http://support.Microsoft.com/kb/321122

  http://support.Microsoft.com/kb/838398

  
  Method 2:
  If the problem persists then relate to the link to get help on the question - below

  http://support.Microsoft.com/select/default.aspx?ln=en-us&target=assistance&x=14&y=15&C1=502&

• the usb is stuck on the usb plug on the underside of the mouse, microsoft 4000 wireless mobile mouse

  Well I was being a fool and pasted my usb key to connect the mouse to the computer in a hole and he is now stuck I tried it out and after a little research I discovered that I stuck the USB to the USB jack on the bottom of the mouse, but why didn't he come?

  Hello

  Thanks for posting your query in the Microsoft Community.

  You have a problem with the Microsoft Wireless Mobile Mouse 4000, being stuck on the USB. It must be hard when something that is important to you does not work as expected. I appreciate any effort that would put you in all. I will guide you in the right direction.

  To help you with the hardware components of the mouse, I wish that you contact Microsoft Hardware Support for assistance.

  Check out the link-

  http://www.Microsoft.com/hardware/en-in/support/contact-us

  Back to us for any questions related to Products from Microsoft or the Windows operating system. We will be happy to help you.

• Microsoft Wireless Mobile Mouse 3000 pointer doesn't move.

  My wireless mouse pointer won't move when I move the mouse. Clicking on will work to place the cursor/pointer is but the pointer does not move. Green light on the mouse turns off shortly after start. The battery is new. It happened when I unploug the mouse to move the laptopcomputer and in general he reajusts himself, but no more.

  Hello

  Thanks for posting your query in the Microsoft Community Forums.

  I understand from the description of the problem, that you have problems with Microsoft Wireless Mobile Mouse 3000.

  Help me with little information.

  -What version of windows you are using on the computer?

  I suggest you to consult the help articles and check if it helps.

  Troubleshoot a wireless mouse that does not correctly

  http://support.Microsoft.com/kb/321122

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  It will be useful.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• How can I replace my Microsoft Wireless Mobile Mouse USB receiver.

  How can I replace my USB receiver. I just lost and I only want to buy a newer version for distributor of mouse Microsoft Wireless mobile mouse 4000.

  Hello

  Check with your local retailers and Microsoft Hardware Support.

  Microsoft Hardware support
  http://www.Microsoft.com/hardware/en-us/support

  Microsoft Hardware - contact us
  http://www.Microsoft.com/hardware/en-us/support/contact-us

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Dysfunctions of the Microsoft Wireless Mobile Mouse 4000 Nano transceiver

  Microsoft Wireless Mobile Mouse 4000 Nano transceiver malfunction, overheated and burned my hand, how to contact Microsoft and get a new mouse?

  I bought it on a year ago, worked well until the transceiver overheated and did not get recognized more by any pc.

  Hello

  The reasons of the overheating of the transceiver are not known, because it was not isolated incident, please go to the link provided below for more information on how to replace Microsoft software or hardware, order service packs and replace product manuals.

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

  You can also get in touch with Microsoft hardware support for assistance.

  Contact us

  http://www.Microsoft.com/hardware/en-us/support/contact-us

   

• Microsoft wireless mobile mouse 6000 v2 2.4 ghz dongle replacement

  Is the dongle that came with the "microsoft wireless mobile mouse 6000 v2" replaceable?  If so, where would you get? URL?

  Hi Amishangel,

  You can get in contact with the center of replacement of Microsoft and are looking for the same thing.

  For more information, you can consult the following article:

  How to replace Microsoft software or hardware, order service packs and replace product manuals

• Wireless Mobile mouse: 6000 does not?

  Wireless Mobile Mouse 6000 PDC, there was already a given solution to get them to work?  I have ensured that the proper drivers are downloaded, there are new batteries and so on.

  Hello

  The Wireless Mobile Mouse 6000 has a 3 year warranty.

  Microsoft Hardware warranties
  http://www.Microsoft.com/hardware/warranties.mspx

  The mouse comes with a support tech 90 day of the 1st incident that was about to begin when
  contact Microsoft at the number below.

  Hardware support of MS and warranty claims
  Tech Support 1-800-936-5700 for MS Hardware.

  I hope this helps.

• Microsoft wireless mobile mouse 4000 rubber wheels problems.

  My wheel cover Microsoft wireless mobile mouse 4000 rubber became sticky and is more tightly bound to the wheel. There were reported incidents of what happens to third parties?

  Hello

  Consult the broken / defective products section from the following link:

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  I hope this helps.

• Wireless Mobile Mouse 4000 overheat

  My Microsoft Wireless Mobile Mouse 4000 is also overheating and I can't use the mouse more. It's too hot to the touch and I get an error message. I used this mouse last six months ago and it was working fine. I have not had to use one until this week. Please notify.

  Hello

  It seems that the mouse has developed a problem.

  Wireless Mobile Mouse 4000 - has a 3 year warranty
  http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=013&active_tab=systemRequirements

  Microsoft Hardware warranties
  http://www.Microsoft.com/hardware/warranties.mspx

  These mice are delivered with 90 tech support of day of the 1st incident that was about to begin when
  contact Microsoft at the number below. If the mouse is defective, they will replace it.

  Hardware support of MS and warranty claims
  Tech Support 1-800-936-5700 for MS Hardware.

  I hope this helps.

• diagram of the battery for 3000 microsoft wireless mobile mouse

  I just need a diagram of the door of the battery compartment for 3000 microsoft wireless mobile mouse. the silver metal piece is out and I need to see HOW

  to reattach it properly so it will stay when I close the lid or the door to the battery compartment.  Touch the + end of the battery to operate.

  Did you find the Mobile Mouse 3000 battery door diagram you are looking for last year?
  I have the same situation.  I don't need suggestions to inform microsoft of warranty.  This is why you and I asked for the diagrams.  If you have the diagram, or you can send me a photo of the battery door configuration, would be great.  Thank you

• Microsoft Wireless Mobile Mouse 3500 problems.

  I'm using Windows vista 32-bit on a Dell Studio 15 laptop.  I have a Microsoft Wireless Mobile Mouse 3500.  I plugged the nano-receiver into my USB port and installed the driver but the mouse does not work.  It does not work if I move my mouse or click on the buttons.  I have bluetooth activated on my laptop but there is no button on the mouse or nano receiver to synchronize with the laptop.  I searched and searched the Internet to try to find an answer, but I don't see anything.  Can anyone help please?

  A couple of things you can look at at\try:

  1. Since beginning--> search box type mouse, when the application Microsoft Mouse appears select.
  2. Select the Dell Touchpad tab, then click on the picture to open the properties of the Touchpad.
  3. In the properties of the Touchpad, choose Device Select.
  4. Check the box that says "Disable touchpad/ponting stick when external USB mouse is present".
  5. Press OK.

  From my experience with Dell laptops, I have also found that sometimes an external USB mouse fails to be recognized because of some quirks with power and USB. Let the wired mouse, then turn off the laptop and unplug the battery for about two minutes. Turn on the machine again and see if the 'magical' mouse appears.

• Receiver Wireless Mobile Mouse 4000 causing BSOD

  It seems to be a growing crowd of users affected by BSOD involving the Microsoft Wireless Mobile Mouses. I, for example, have the WMM4000 on a 32-bit Vista computer. If the receiver is unplugged, instant BSOD (error IRQL-type). Even in this case, at the time, the laptop will hit just the same BSOD error on its own.

  Is there a definitive answer for fixing these mice?

  TGP

  I beg of you.  These related to the SynTP.sys Synaptics Touchpad Driver.  I would like to re - install the latest driver available.

  You also have a driver that is known to cause called c:\windows\system32\drivers\sptd.sys of aft (ALcohol120 or daemon tools).  Which must be removed and replaced.

  Please remove the viewing programs of CD such as Daemon Tools and Alcohol 120%.

  They use a driver, are in your dmp, called c:\windows\system32\drivers\sptd.sys, which is known to cause a BSOD.

  Use this program to uninstall SPTD DuplexSecure
  -Http://www.duplexsecure.com downloads

  When you are finished, you can use this Freeware:

  MagicISO Virtual CD/DVD-ROM (MagicDisc) instead

  http://www.MagicISO.com/download.htm

• Frozen 3500 wireless mobile mouse

  Received Wireless mobile mouse 3500 as a gift yesterday. Worked a lot for 24 hours, then arrow would not move. Old wired mouse would not work. Rebooted - still does not work. Then reinstalled software itself

  and it seems OK now. Is this a recurring problem?

  Hello

  It seems that the drivers have been updated and I think it should be no problem with the mouse in the future also.

  You can always let know us if you encounter a similar problem again.