Wireless mouse and the Keyboaed - visualization for the lids and numlock on monitor

Similar Questions

• I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse.

  Original title: right click on the mouse itself activating

  I borrowed a USB to a person at work and I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse. The left click of two devices works normally, however, sometimes she does not respond to clicks and it takes a few seconds to work. The left button was constantly starts to turn on, as if he was stuck. After that I hit Alt + Tab and modify windows it stops for a few moments and starts at a later date. I havo not found a specific condition or a combination of keys that may trigger the fault.

  I read a few posts on discussion forums, but all say that it could be a hardware problem, which I think is not, because both devices have the same problem and I'm sure it all started with the insertion of the borrowed memory stick. I scanned the readers to help Symantec's EndPoint Protection and installed Microsoft Security Essentials and performed a full scan, but found nothing. I even restored the system, but the problem remains.

  Should I get a different antivirus? How can I find the cause so I can find a better targeted solution?

  Try to install the drivers from this link and check.

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77167

• installed a keyboard and wireless mouse and the mouse works fine, but the keyboard types the wrong keys! Any ideas? Thank you

  installed a keyboard and wireless mouse and the mouse works fine, but the keyboard types the wrong keys! Any ideas? Thank you

  Wired or wireless - is usually not serious unless the wireless can get more interference.  If the keyboard is close to the receiver which is connected to the computer and you get the strikes hurt - my suggestion is to try first the keyboard on another computer.

  To do this, * not * require you to install specific drivers.  Simply unplug the combo of a computer and in the other and see if the keyboard works correctly.  Then, you can troubleshoot from there.

• \Microsoft 700 v2 wireless mouse and the keyboard does not not after upgrade

  installed windows 8 after install to customize exactly the point of putting up wireless mouse and keyboard no longer works has had to use keyboard.to and wired mouse usb finish install. Still does not work after restarting.

  Hello

  I'm sorry to know that the keyboard and Microsoft mouse do not work on the Windows 8 operating system. But we can fix that later article, which gives a few steps on how to solve the problem of mouse and wireless keyboard.

  Please click on the following link and follow the steps. http://support.microsoft.com/kb/838398. This article applies only to the hardware devices that are mentioned in the properties. Please make sure that your keyboard and wireless mouse is referred to as properties.

  Hope this should solve the problem. If you still have the same issue, just reply to us and we can help you better.

  Thank you

• my wireless mouse and keyboard do not with windows xp after you install a new battery.

  my wireless mouse and keyboard do not with windows xp after you install a new battery. they work very well in the diagnosis.

  Hi nwecker,
   
  -What is the brand and model of your mouse and your keyboard?
   
  If the keyboard and mouse are Microsoft, here are some links that you can give a try on:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  Solve the lack of response from the keyboard or the mouse wireless after weeks of typical use

• Microsoft Wireless Mouse and keyboard Natural Keyboard Combo

  I have a combo of Microsoft wireless keyboard/mouse and the mouse went bad.  The mouse went bad and I replaced the mouse of this combo with a standalone Microsoft wireless mouse.  The stand-alone mouse and the keyboard/mouse combo are both connected via USB.  From the start and a few other times randomly, my mouse goes haywire.  I open the Device Manager and see that there are 2 "mouse HID-compliant" items listed (I presume because of two separate USB connections) - I right click and uninstall one of them (or the other, it's not serious) and the problem is solved.  Unfortunately, at startup or at other times, the same problem happens again, and I solve it the same way.  Short of buying a new keyboard, is there a way to fix this permanentaly?

  I don't think that you need to plug the new mouse, it should work on the original sensor.

• Microsoft 1000 - nano-receiver undetected mobile wireless mouse and heats up on the connection

  I use a wireless mouse mobile Microsoft 1000 - today when I plugged the mouse doesn't seem to work and the nano-receiver seems to heat up a bit - pls help me trouble shoot i I reinstalled the drivers on the site - not sure if the nano-receiver does not work or in any other issue

  Hello

  If the device does not work on another computer and you have tried all the troubleshooting steps in this article"to"If the device does not work on another computer too.

  http://www.Microsoft.com/worldwide/

  Reference:

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/838398

  It may be useful

• ... Replaced HP wireless mouse batteries, the left button does not work

  HP wireless mouse... dies, replaced batteries... wheel works, works of pointer, inoperative, to the right of the button to the left

  her sci

  Thanks for trying to help. I tried the solution, but too complicated for me. I'll remove the mouse, buy another and
  From there on. Fortunately my finger can operate most of what I need this computer.
  Good old Geekster test

• Disorder of 1000 wireless mouse. The mouse is defective?

  My 1000 wireless mobile mouse is barely 6 months old, and I have not used a lot else. The problem started a few days ago.

  After a few minutes of work, the mouse cursor gets stuck on the top edge of the screen as if someone pushes the cursor upward continuously. The pointer can be moved horizontally along the top of the screen with some urging, but he refuses to go down. I tried surface another mouse. It is certainly not a problem of surface.

  I checked the troubleshooting section and tried everything that was suggested to http://support.microsoft.com/kb/838398

  1. I've tried different ports

  2 tried different computers (all running Windows 7 64-bit)

  3. install the latest IntelliPoint drivers

  4. new battery

  5. no wireless device nearby except my cell phone and the EVDO modem that works in totally different bands.

  So is it a hardware failure or what? Should I go for the RMA?

  Thank you

  Hello

  1 did you change your computer priro to this question?

  2. you receive an error message?

  3. What is the brand and model of your computer?

  4. What if this problem occurs when you work with a particular application?

  You can follow the suggestions and check out them.

  Method 1

  You can read the article.

  Troubleshoot a wireless mouse that does not correctly

  http://support.Microsoft.com/kb/321122

  Method 2

  Check to see if the problem exists in a clean boot state.

  Boot and see if the problem still persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  See also:

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

• Microsoft 5000 wireless mouse and keyboard does not.

  I have a problem with the mouse, because the battery led indicator does not work and why I never know when I have a low battery level and this problem also occurs in the keyboard, I use batteries no rechargeable ones, but also tested with rechargeable, and when I put new batteries green light led displays , but then the led turns off and doesn´t work once again, even if it should indicate low battery, I installed the latest drivers for the keyboard and mouse and I Don t know what may cause this situation, I, apreciate your help.

  Hello

  Please contact the Microsoft Community.

  I you have to check out these items-

  http://support.Microsoft.com/kb/838398/en-us

  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/mouse/wireless-Bluetooth

  If nothing is done, then I wish you contact Microsoft Hardware Support for assistance more -.

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  Let us know if you need help pertaining to the Windows operating system.

• Jenkins wireless mouse and keyboard does not not on my DELL?

  For my birthday, we got a keyboard and mouse wireless Jenkins. I went to get my dell inspiron n5110 (Windows 7, x 64) and I opened and plugged in. then SAIS "Device Installation" "Search Windows Update" 'Search pre-configured files' 'NO DRIVER FOUND' and I was like whaaaaattt... so I goto the Device Manager and check why. Driver Manager put it under "Other devices" and he know 2.4 GHZ 2WAY RF RECEIVER, then I go online to search for a driver. the last driver that it was since 2006 and I downloaded it, but I didn't know where to put the files. so I ignored it. and went to the microsoft site answers found a guy with a similar problem, but he said 'I then plugged it at startup after uninstalling the Device Manager.

  I did and it worked! I logged on then he know... INSTALLING DEVICE... NO DRIVER FOUND... so then, on the same saw post whose existence was a moderator of microsoft who gave 3 methods on how to solve this problem. on the 3rd, he was using the registry. I followed where to go and locate the first file in a folder that I had to remove "FILTER" then delete "FILTER BELOW", but upper filter was not only lower filter... so I came here and I hope someone has the answer :)

  Hi Curtis,.

  I suggest you to contact the manufacturer of the mouse and the keyboard for the pilot.

  Email us if you have any other issues related to Windows.

• Wireless mouse and keyboard do not function correctly after Windows Update.

  Original title: question of another wireless keyboard and mouse.

  Is the keyboard model 1. 0 comfort wireless 1045, the optical receiver 3.0 has & optical mouse taken 2.0 supported by Windows 7? They are used to work with XP & my Vista Ultimate Home. In fact, they have worked with Windows 7 for a while. I think that an update (I have no idea of who or what) caused the keyboard to stop functioning. Yes, they are old, but I do not keep up with the Jones, I use what works, until someone thinks that we need another dose of fallout and disables it for me. I'm angry again.

  [Moved from comments]

  Hello

  It seems that you have a problem with performnace of the mouse and wireless keyboard.

  I suggest you consult the following links, which have enough information to solve issues of the mouse and the wireless keyboard.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard.

  http://support.Microsoft.com/kb/838398

  Troubleshoot wired keyboards that do not or only the erroneous characters category.

  http://support.Microsoft.com/kb/258826

  I hope this helps!

• Microsoft wireless mouse and keyboard

  When I scroll upward or down with the mouse, the result is delayed by a second or two. Otherwise, works well.

  Hi RobertBoivin,

  1. you have made no changes to the computer before the broadcast took place?
  2. what operating is installed on the computer?
  3. What is the number of the model of the mouse and keyboard?

  Method 1
  Try the steps from the following links:

  The problems with the mouse button or scroll the parameters
  http://support.Microsoft.com/kb/303091

  Troubleshoot the incidents of the response to the mouse or wireless keyboard
  http://support.Microsoft.com/kb/838398

  Method 2
  If the steps above fail, then I suggest you to update the mouse drivers by selecting the model number of the mouse from the following link:
  http://www.Microsoft.com/hardware/en-us/downloads

• Wireless mouse and keyboard does not

  I downloaded DriverHound, scanned and 73 drivers who need updates. I downloaded the new sand pilot went to automatic installation. Never completed facilities and the mouse and keyboard stopped working. No problem with the monitor. I put charges batteriesin the mouse and keyboard, deleted/replaced the USB connection without success.

  I'll send this to my laptop which is not downloading from DriverHound. Computer is h9 - 1270t.

  Hello new WDJ37,

  I provided you with the HP support document: using HP Support Assistant (Windows 7), who will explain how to use software that will automatically update your software and drivers from HP. I am also including a link to the HP Support Assistant so that you can download and install the latest version of the software on your computer.

  Please re-post if you need extra support. Thanks for posting on the HP Forums. Have a great day!

• Microsoft 3500 wireless mouse causes the computer crashes?

  I recently bought the microsoft 3500 mouse - I used the 4000 before on this computer, and it worked well and was a good mouse, so I decided to buy it. I installed it last night (Windows had some difficulties to recognize the software), and it worked fine. I left the USB plugged when I turned off the computer.

  I tried to start this morning and my computer froze and did not go beyond the screen initial screen/first of the motherboard - it wouldn't even go to BIOS. It started off fine, however, when I disconnected mouse USB and tried to start without him. Anyone has an explanation as to why this is happening?

  Check in the BIOS as to ensure that the BOOT sequence does not list USB before the floppy drive / CD / hard drive.