Wireless mouse (PA3706E-1ET1) Toshiba has stopped working

Similar Questions

• Pro L10: After using a wireless mouse, the touch pad has stopped working

  Pro L10. After using a wireless mouse, the built in touch pad has stopped working properly. At the start of the keypad icon touch shows and the touchpad works intermittently, after a few minuets, the icon disappears and the touch pad stops working. In the control panel / mouse & or device drive I can how the program works, then disappears.

  I deleted the software and reinstalled nothing doesn't. In some cases, I get a message that a pointer is on.

  Can you help me?

  Hello

  It seems that the wireless mouse or mouse wireless drivers/software has a bad influence on the touchpad.
  I put t have a good solution for this problem. Well, you can consult the page of the Toshiba driver for latest driver updates. If the updates doesn't solve this problem I suggest to use either the mouse wireless and disable the touchpad with FN + F9 key combination or use a regular USB mouse.
  I guess that you are having regular problems with a USB mouse.

• Portege R500 - Flashcard Toshiba has stopped working

  Hello

  I get this error "Toshiba Flashcard has stopped working and will be closed" when I start my laptop Portege R500.
  What is the cause?

  I'm running Vista and my PC continues to run even if it does.

  See you soon,.
  Elty

  Hello

  It's not easy to say what causes this problem.
  In most cases to other parts of the software may affect the functionality of different applications.
  For example, my flash card stopped working after Vista ran some updates.

  I simply removed the old VAP (value added package) of the system.
  I cleaned the registry and the system using CCleaner (free tool) and reinstalled again the VAP.

  Now everything works fine.

  I think you should try the same too.
  Remove the VAP and installed as the new VAP downloaded from the page of European driver of Toshiba.

  Check it out!

• HP Photosmart Wireless B109n-z: my scanner has stopped working

  My printer and copier work ok but the scanner has stopped working and gives me an error message-

  "The analysis cannot because another program or computer using the HP netwoked imaging device. Try again later.

  The device is not on a network, and there is no other users outside of myself using my laptop.

  Hello

  You can try this link?

  http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-wireless-all-in-one-printer-series-B109/3794623/model/3794624#Z7_3054ICK0K8UDA0AQC11TA930C7

  Thank you.

• XBox wireless receiver pilot (xusb21.sys) has stopped working properly.

  has stopped working
  correctly.

  Hi Dee,

  When you say "xusb21.sys" which is the source of the error?

  To resolve this issue, try the following steps:

  a. right click on my computer.

  b. go in Properties.

  c. click on Device Manager.

  d. right-click on the unidentified device.

  e. go to Properties.

  f. click on the Driver tab.

  g. click on Update driver.

  h. Browse my computer for driver software.

  f. Let me pick from a list of device on my computer drivers

  g. Windows common controller for window class Xbox 360 receiver wireless for Windows Version: warning ###Update. Click on Yes.

  Check the status of the question now.

  Also, please refer to the section of the solution of this link.

  Please come back with the results of the given suggestion.

• Utility supervisor password Toshiba has stopped working properly.

  has stopped working properly.

  An update is available that solves this problem.

  Press or click on to download the update on the site of Toshiba Corporation

  Download instructions

  1. Tap or click run or Open. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. Follow the steps in the installation wizard.

  It is a Toshiba program, so the place to get answers to this topic would be Toshiba, not Ms.

• can you tell me why the mouse on my laptop has stopped working?

  Can you tell me why my mouse stopped working and how to make it work again. Thank you

  If it is the synaptics mouse device you have installed there are a lot of questions similar to yours... I had a wireless mouse at the end of the account and use that now that I could not fix the problem... but... you accidentally pressed the FN and F7 as that often disables the device! (depending on the machine)

  Go to the hardware and peripheral control panel... and you should see several options under devices and printers... mouse option should be there... enter this option and see if you can solve the problem... good luck.

• I deleted the driver for the mouse and the mouse and the keyboard has stopped working.

  I had installed an updated driver mouse and mouse keep locking up. The Windows troubleshooting information indicates that I have to erase the disc from the mouse, and then reinstall the new mouse driver. When I deleted the mouse driver, the mouse and the keyboard no longer works.

  The computer is running Windows XP with Service Pack 3.

  The computer is one that I built several years ago.

  I tried the things:

  1. I tried the ALT, left SHIFT + Number Lock which is indicated as mouse keyboard operation who has worked in the past.

  Well it does not either from the keyboard is dead.

  2. I tried PS2 Mouse and a keyboard.

  3. I tried a keyboard and a USB mouse. The system shows new hardware found and he wonder then click NEXT to load the driver. No mouse, no keyboard, so no click.

  4. I can't get into the bios, because I can't hit keys to vector in the bios during startup.

  5. I tried to load the Windows XP disk, but the startup routine ask me to hit any key to boot from the CD.

  I have no mouse or keyboard control and therefore cannot respond to any action required by the system.

  Does anyone know a way to solve this problem?

  Solution of my wife - buy a new computer.

  Have a better solution for this problem?

  Thank you

  Bill

  Always try a PS/2 keyboard.  Maybe your PC is not able to access the BIOS, because the keyboard is USB.

  What make / model of the keyboard / mouse "kit"?

• Satellite L755-M1M0: power button Toshiba has stopped working

  Yesterday I install CCleaner and I make a run to my pc and after that this button isn't working.
  How we can solve it. I don t want to use FN + F9 I want to use this button because it is so important for me... can someone help me... on this subject...

  My OS is windows 7 64 bit.

  + The message was edited: laptop model name has been added to the topic.

  Sorry my friend, but your ad is very confusing.
  > Yesterday I install CCleaner and I make a run to my pc and after that this button isn't working.
  This button? Which button?
  > I Don t want to use FN + F9 I want to use this button because it is so important for me...
  If you don't want to use FN + F9 I can understand that but that this button do you mean?

  You have a general problem with the functionality of the FN button or what?

• my microsoft wireless mouse has stopped working, I replaced battery

  my wireless mouse was fine and then stopped working. I changed the batteries and it seemed to work and then arrested again.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/838398

• 2.4 GHz HP wireless optical mouse has stopped working

  My wireless mouse has stopped working. I use it on a laptop Windows 8. I used this mouse wireless with this computer for almost a year. All of a sudden it just stopped working. I changed the batteries, so it wasn't the problem. I have uninstalled and reinstalled software and that did not work. Is there anything else I can try before I buy a new mouse? Product # is WT564A.  The model # is FHA-3510. The S/N IS CN1 [personal information]. Product #, model # and s/n is not the computer mouse. Any help would be greatly appreciated.

  Hey there eunash,

  I found three links that could help you, please take a look and try some of the steps:

  Keyboard and wireless mouse troubleshooting

  Mouse, touchpad and keyboard with Windows problems

  .. .and finally, check out the Merita post on this thread, they had some good ideas while explaining what might be going on: http://h30434.www3.hp.com/t5/Other-HP-Consumer-Products-and-Technologies/HP-FHA-3510-mouse-trouble/m-p/2666383/highlight/true#M10473

• Scroll wheel on the mouse Microsoft 3000 wireless has stopped working?

  I bought a Microsoft Wireless 3000 Mobile in purple mouse, manufacturer #6BA-0026 last month and now the wheel has stopped working. I can't move the mouse. Only the buttons work, this mouse is less, is about a month. Cannot take back to the store because they one day 14 return policy, so now I'm stuck with a mouse that doesn't work. Is it possible to get the scroll wheel to work. Using the button takes a lot more movement and it is easier to use the wheel. Why my mouse was working only for a month? Do I have to spend more money to buy another mouse? Is there some type of downloading software that I can use to make this mouse works correctly.

  Hello

  1. have you made changes on the computer before this problem?
  2. did you try to use the same mouse to different computer and check?

  Step 1: Run the fixit from the following article and check.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Step 2: Uninstall and reinstall the software mouse and check.

• sMy Microsoft UDB wireless mouse has stopped working. Can it be repaired or is it just did.

  My Microsoft 3000 wireless optical USB mouse has stopped working.  Can it be repaired or is it just did.

  Hello

  -Don't you make changes to your computer because of which the question began?

  I would recommend that you follow the steps in this article and see if they help.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

• HP touchsmart IQ775 Wireless mouse has stopped working.

  Wireless mouse has stopped working. I have a HP Touchsmart IQ775 so I can touch the screen to navigate. did a restore of the system in SafeMode this morning and everything works fine now, but of course, it happens again. Last week, the computer did an update to quicktime which disabled, so I had to completely uninstall quicktime and the mouse immediately worked. looked but could not find that whatever this is updated overnight to re - train the problem this morning. However, the system closed and said 'power system failure driver' cannot know how to fix this, all say updated mouse drivers. is associated it with? This not computer savvy, usually google problems on my ipod touch and looking and staring at me but were not able to understand this. Thanks for all the tips

  Hello

  HP also has their own update so he could be there?

  I would stop automatic driver updates, because they are often older certified and MS is far behind.

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx
  ------------------------------------------------------

  This, to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Try to run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------

  Also check with HP support and forums.

  HP support
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Microsoft Wireless Mobile Mouse 3500 has stopped working

  My wireless mouse has stopped working. The green light at the top is, but the blue light down below will not be displayed. I can push buttons and he will answer, but when I try to move my cursor I get nothing.

  Hello

  I tried new batteries?

  Looks like the mouse has problems.

  Wireless Mobile Mouse 3500 - has a 3 year warranty.
  http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=019&active_tab=systemRequirements

  Microsoft Hardware warranties
  http://www.Microsoft.com/hardware/warranties.mspx

  These mice are delivered with 90 tech support of day of the 1st incident that was about to begin when
  contact Microsoft at the number below.

  Hardware support of MS and warranty claims
  Tech Support 1-800-936-5700 for MS Hardware.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">