Wireless network adapter does not work anymore and will not be repeated work without stopping the computer and then back on.
Sometimes I leave my computer on at night. Sometimes I notice that when I get back to him the next day that he has limited connection to the network I use. When I try to disconnect it from the network, then reconnect, it says that it cannot connect. Then, when I try to restart my computer it is sitting at a screen saying "stop down". "." My wireless network software also is unaccessable in which she does not open and if I close the Task Manager and reopen it flashes for a second then closes.
However when I turn it on manually and then turn it on again, which apparently is not good for the computer, I am once again able to connect to the network with full access.
Can someone please tell me why this keeps happening and how to fix it?
original title: unable to connect to a network.
Hello
Are you aware of any changes made to the computer, before the show?
Method 1:
Step 1: Safe Mode with networking
Start your computer in safe mode with network and verify that the question.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Step 2: Clean boot
If you are not facing the problem in safe mode with network, then put your computer in a clean boot and search for the issue.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.
Method 2:
Update the NIC drivers and check the issue.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
Update drivers: recommended links
http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links
Method 3:
Run a virus scan and make sure.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.
I hope this helps.
Tags: Windows
Similar Questions
-
Wireless network adapter does not work on my Satellite A200
Hello
My wireless network adapter does not work under Vista. If I press FN + F8 nothing happens. Wireless communication is always offline.
What can I do?
Details:
Typ: Atheros AR5008X Version: 7.2.0.164
Laptop Satellite 200
PSAE6EPlease help me!
Thanks in advance!Phil
BIOS bug? I don t think so
First of all, you must make sure that this isn't a hardware problem. In this case, insert the Toshiba Recovery CD and reinstall the operating system of this device. This will outline the laptop to factory settings. Notes; This would format the whole HARD drive.
After the new installation, you must activate the WLan switch on the side of books, and you can then use the switch button FN + F8 to select the WiFi network.
I assume that you have already configured your Wlan router. So the same settings such as the SSID, encryption of WLan, etc. must be defined on the laptop too.
-
Atheros AR5007EG Wireless Network Adapter does not
Hello
My Atheros AR5007EG Wireless Network Adapter has stopped working. I tried to update a driver he says not installed correctly. I am running windows 7 32 bit
There should be a little more characters for your PC model Toshiba laptop. For example, here is the support page for the Toshiba Satellite L300 - ST3502--> http://support.toshiba.com/support/modelHome?freeText=2221250
If it was your model, you click on the "Drivers & updates" tab, click on the "Wireless" link under "filter by" and then look for the link "Atheros Wireless LAN Driver for Windows 7 (32/64)" you get to a page where you can download the driver installation package.
Download the driver appropriate for your computer (which may or may be not the same as in the above example) and run the installer.
-
Atheros AR5125 wireless network adapter does not
Atheros AR5125 wireless network adapter not working not properly, says cannot find driver information too
Any help, please notify!
JudyB_729
Judy
What operating system do you use? I would like to move to the section appropriate for your driver problem, but can't until I know. BTW this section isn't for comments etc site technical support
-
I just reinstalled windows 7 and I can not get my work a wireless adapter. I went in all directions looking for drivers to use and everyone I try does not work.
I tried:
Atheros Wireless LAN Driver 2011
I saw someone talking about DriveTheLife in another forum and decided to try it.
IT WORKS LIKE MAGIC, I don't know how he did it but he found and installed all the drivers I needed!
-
Satellite L50-B-1DZ - wireless network adapter does not work
So, my network wireless adapter completely stopped working. 2 days ago I couldn't connect to networks wirelessly without problem (although I've disconnected and will need to run the troubleshooter every few hours to reset it...), but yesterday I started to get the message "not connected - no connection is available. In broadcom 802.11n network adapter in Device Manager, the icon has a yellow warning symbol and the error message "this device cannot start. Code 10 ".
I tried to update the drivers, but it gives just the same error message. I also tried to do a restore of the system since a week ago, but it has not fixed either.
I found a youtube video that said that the problem can be caused by a software conflict and change value from registry, but that no longer works, and now I'm full of ideas.
How have you tried to update the driver WLan?
Have you tried to uninstall the driver first, and then after reboot again to install the new driver downloaded from Toshiba UE driver page?Try it!
You said you reset the system in the past?
How? Have you used the Toshiba recovery procedure and have you installed already preinstalled system once more? -
S3-391 Acer wireless network adapter does not work after driver update
Hi, I have an Acer Aspire S3-391 running Windows 7 64 bit and I have recently updated my card (Atheros AR5BMD222) wireless network to the latest version of such 10.0.0.274 as recommended by the Acer site. After updating the driver, I can no longer connect to my wifi at home. When I try to connect, I get the message that no wireless connection is available (even if all my other devices can see the wifi network) and when I diagnose the problem, it is said that there might be a problem with the wireless network card and that windows could not automatically bind the ip stack Protocol. I tried to uninstall the new driver and reinstall one old and running a system restore before installing the new driver, both with no luck. When I try to manually configure a wireless connection, I get message "an unexpected error has occurred." I have an automatic DNS and IP address, and when I look at my ipconfig, IP, DNS, DHCP, etc all have addresses. Any help would be greatly appreciated, thank you.
And while playing, I managed to fall on a solution. When I looked at the properties of my wireless network card, I have disabled NetBIOS over TCP/IP and now everything works fine.
-
Wireless network adapter does not not for Pavilion DV6000
My Wi - Fi just stop working and I can't connect to my wifi at home more. When I click on the wizard wireless in the Panel, nothing in charge. Wifi switching active button disabled, shows nothing on the screen (which it used to) went into the Device Manager and says "this device does not work properly because windows cannot load the drivers required for this device" (code 31)
Ive shut down the computer and a restore of the system for a few days before the show but has not resolve.
Any questions/possible solutions? Thank you
Try this driver and see if that fixes the problem.
Vista:
XP:
-
Wireless network adapter does not work
I get the error 10 and 31, and it won't let me access the internet
Hello
Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.Check the site of the manufacturer of the system for latest driver.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
manufacturer of system become your backup policies).Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
updated drivers.I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
are almost always old, and you can search drivers manually as needed.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
After the installation of Software Distribution Service 3.0 update my wireless network camera does not work how do I uninstall Software Distribution Service 3.0
How did you receive the update?
Was it via Windows Update or Microsoft Update?
Before the changes are made to your computer, the system restore points are made. This is so that you can go back in case an update causes problems.
Follow these steps:
1. click on the Start button
2. click on accessories
3. click on system tools
4. click on system restore
5. click on next
6. in the calendar that appears, select the one which refers to Software Distribution Service 3.0 and click Next
After the collection of certain data, the computer will restart, and the update will be gone.
Hope this helps
Post back if necessary
___________________________________________________________
If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Wireless network adapter is not installed and configured
I have recently re installed windows vista for my laptop dell inspiron 1545. I am not able to connect to wireless internet, it says that the wireless network adapter is not installed and configured. How do I install it and where can I get the wireless network adapter. I have a cd or anything for it. Thank you
You can get in trouble with your device drivers, firmware and/or software. Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears. Check each device to a red x, yellow! or white? These identify devices with problems probably (drivers, but also of conflict or something else). Click on each for more details and troubleshooting tips. If you need to get drivers (and you shouldget from Dell for the wireless adapter at all you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates). In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm. Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html. > http://support.microsoft.com/kb/244617.
The adapter is inside the laptop. You don't need to do something with it to install it. Install the drivers, firmware or software for it and your version of Vista from Dell (all that apply) "install". You must then go to start / Control Panel / Network and sharing Center and configure the adapter with the appropriate parameters and to establish the appropriate network connections. This will take place in settings required by your ISP, and maybe your router or modem (so you may need to contact them if you don't know the settings).
Here are the procedures for Vista with Windows7 network layout that can help:http://www.windowsnetworking.com/articles_tutorials/Windows-7-Understanding-Network-Administration-Configuration.html.
Here is another article on home networks (with several links to related articles which must all be considered - as well as others, you will find in the related articles) to help you better understand the home networks: http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network. If it's for Vista, much of it applies to Windows7 (although there may be some differences that should be addressed in the previous article).
Here is an article on the networking of the different versions of Windows:http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows.
Here is a tutorial on how to set up a home network (including a wireless)-click on additional links for more information that may be helpful:http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.
Here is an article on troubleshooting network connections wireless (with links):http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems.
Here's a long guide on wireless internet connections in Vista:http://www.techwarelabs.com/guides/misc_mod/vistaconnection/.
Here is an article on how to set up wireless internet in Vista:http://www.clpgh.org/usingthelibrary/technology/wireless/WindowsVista.pdf.
As I am unsure of your Setup, I've included several items that can help depending on how you are setup.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Wireless network adapter could not be activated
My laptop also did EXACTLY the same thing in the morning today.No effect with the wireless on switch on the computer. The light is always red. Last night an automatic update that happened (update for windows Vista (KB955430) 09/05/2009 09:03), which cannot be deleted. I don't know if this problem is related with the update.My laptop is HP Pavilion dv6439nr. Running Windows Vista Home Premium (Service Pack 1). Wireless adapter is "broadcom wireless 802.11 b/g WLAN PCI" that is gone now.Windows network diagnostics shows "this computer doesn't have a card installed and configured wireless network."HP Home Network Center shows "Wireless status: disabled; When I try to enable wireless LAN, it shows "wireless network adapter could not be activated.I tried to scan and reinstall the driver but the device does not appear.The wireless router works fine with other laptops.If anyone has a solution it would be greatly appreciated.Thank youAlboury,
It seems at this point that your wireless network adapter has a hardware problem. Check out this troubleshooting guide step by step on the HP Pavilion support web site. If you can't get your active wireless card, you will need to contact HP or repair HP authorized repair for hardware Center.Let us know if we can provide assistance.
Thank you
Gloria
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
You want to reload elements8 as parts does not. Repeatedly askes to enter the password but my sign in Photoshop will not work for the element. Help
Please post related queries from Photoshop Elements
-
I have a Compaq Presario CQ61-410US (WA974UA) which is equipped with an Atheros AR9285 B/G/N wireless network adapter. The laptop Internet access was fast and stable when using a Wi - Fi N. Its pilot AR9285 was the initial version of the 8.0.0.172 factory. But because there were so many subsequent driver updates, I've updated the display driver version from the support page 8.9.9.316 (sp48755.exe). However, after updating the driver, I immediately lost Internet access. The laptop is running Windows 7 Home Premium with Service Pack 1 and 64-bit.
The driver seems to be installed OK, but it does not connect to the Internet. Here is the status of the driver: 1) in Device Manager it appears OK and is presented as working properly. (2) in the results of IPCONFIG/all, it there is no entry for the wireless adapter and without IP addresses are affected. Here are the results of the IPCONFIG/all command:
C:\Users\Karen>ipconfig/all
Windows IP configuration
Name of the host...: KarensLaptop
Primary Dns suffix...:
Node... type: hybrid
Active... IP routing: No.
Active... proxy WINS: No.Ethernet connection to the Local network card:
State of the media...: Media disconnected
Connection - a DNS suffix is specific. :
Description...: Realtek PCIe FE Family Controller
Physical address: 00-26 - 9th - JJ - 83 - 9 c
DHCP active...: Yes
Autoconfiguration enabled... YesTunnel adapter isatap. {E52D6F3E-5080 4B3B - 8BE7 - B7CFD7E137D1}:
State of the media...: Media disconnected
Connection - a DNS suffix is specific. :
... Description: Microsoft ISHTHP adapter
Physical address: 00-00 - 00 - 00 - 00 - 00 - 00 - E0
DHCP active...: No.
Auto connection...: YesMap of tunnel Teredo Tunneling Pseudo - Interface:
State of the media...:...: media disconnected
Connection - a DNS suffix is specific. :
... Description: Teredo Tunneling Pseudo - Interface
Physical address.... : 00-00 - 00 - 00 - 00 - 00 - 00 - E0
DHCP active...: No.
Autoconfiguration enabled...: YesC:\Users\Karen >
(3) Trying to Connect through connections network does not a list of known available networks and instead says "not connected - no connection is available."
I have read several messages from the HP Forum and tried a lot of things, including the installation of various updates driver later thanks to the version 10.0.0.222, but I still can't the driver to connect to the Internet. I also changed my router "n" has only B/G as the AR9285 pilot has a history of problems with Wireless N. Even back to the original driver version 8.0.0.172 provides an Internet connection.
Any advice would be appreciated.
Hello:
I'm glad that you were able to restore your internet connection.
I'd go with the latest driver HP vice one from another source.
The only time wherever I go outside HP for wireless network drivers is if you have an Intel wireless card.
My recommendation is to use the free MS Security Essentials antivirus/antispyware, which never interfere with how "things important works" on your PC, such as network connections.
http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201
Your router with a hardware firewall and a software firewall Windows. I don't see the importance of adding other firewalls.
Unless you have a lot of albums secret info on your PC that pirates would like to get my hands on, these fully functional security roadblocks are adequate for most of us.
-
Satellite L300-2This - wireless network adapter is not listed in Device Manager
PL. seated me in solving the WIFI issue in my newly purchased Toshiba Satellite L300-2This (PSLBGE 020004AR)
1. me confirm - this model is equipped with WIFI as shown in the Web of Toshiba site but my device manager it is not displayed at all. (using Windows XP)-its only display Realteck LAN
2. I installed the drivers from the site web of Toshiba - but always hardware WIFI not be picked up by any driver. Device Manager showing that a single 'Ethernet LAN' not installed-may be it is the WIFI card but once again on three pilots (real teak/intel/Ac..). which is the right selection computer-based laptop model No.? as none does not detect the hardware.
3. confirm me - this model is NOT - equipped also BluTooth?
Appreciate the quick response in this regard.
Violaine Asim
Hi mate,
Just a simple question: have you activated the wireless network adapter using the hardware on the computer switch portable and key combination FN + F8?
Satellite L300 is permanently equipped with wireless network card because a friend of mine had the same specifications.
However, you should try to update the WLAN driver. Check the download page of the Toshiba driver for an update.
Welcome them
Maybe you are looking for
-
Firefox won't let me download addons. He says that I don't have Firefox running, but clearly I. I already downloaded some addons, but now it won't let me add. I use Android on Nexus 7 tablet.
-
compatibility problems between DA2400ES and X930D?
Purchasing a X930D, someone has already tried it with a DA2400ES and/or someone does know of any compatibility issues?
-
---------------------------Microsoft Silverlight Update---------------------------This page requires a newer version of Silverlight. You want to install the latest version from the Silverlight Web site?---------------------------Yes No---------------
-
6500 a: error ink system OfficeJet 6500 a 0xC19A0020
The printer was working with low ink status but after that I have replaced a new black ink cartridge. the machine has changed for "ink system error... code error: 0xC19A0020.» I followed the instructions of the document to be able to reset the machin
-
Suddenly, I have today no sound on my pc.
HP pavilion dv6, windows 7 No sound for computer turn on or for iTunes, have checked all settings volume mute is not on. Please notify