Wireless network adapter does not work on my Satellite A200

Hello

My wireless network adapter does not work under Vista. If I press FN + F8 nothing happens. Wireless communication is always offline.

What can I do?

Details:
Typ: Atheros AR5008X Version: 7.2.0.164
Laptop Satellite 200
PSAE6E

Please help me!
Thanks in advance!

Phil

BIOS bug? I don t think so

First of all, you must make sure that this isn't a hardware problem. In this case, insert the Toshiba Recovery CD and reinstall the operating system of this device. This will outline the laptop to factory settings. Notes; This would format the whole HARD drive.

After the new installation, you must activate the WLan switch on the side of books, and you can then use the switch button FN + F8 to select the WiFi network.

I assume that you have already configured your Wlan router. So the same settings such as the SSID, encryption of WLan, etc. must be defined on the laptop too.

Tags: Toshiba

Similar Questions

  • Pavilion dv6 LY090UA #ABC: I reinstalled Windows 7 and my wireless network adapter does not work

    I just reinstalled windows 7 and I can not get my work a wireless adapter. I went in all directions looking for drivers to use and everyone I try does not work.

    I tried:

    Atheros Wireless LAN Driver 2011

    I saw someone talking about DriveTheLife in another forum and decided to try it.

    IT WORKS LIKE MAGIC, I don't know how he did it but he found and installed all the drivers I needed!

  • Satellite L50-B-1DZ - wireless network adapter does not work

    So, my network wireless adapter completely stopped working. 2 days ago I couldn't connect to networks wirelessly without problem (although I've disconnected and will need to run the troubleshooter every few hours to reset it...), but yesterday I started to get the message "not connected - no connection is available. In broadcom 802.11n network adapter in Device Manager, the icon has a yellow warning symbol and the error message "this device cannot start. Code 10 ".

    I tried to update the drivers, but it gives just the same error message. I also tried to do a restore of the system since a week ago, but it has not fixed either.

    I found a youtube video that said that the problem can be caused by a software conflict and change value from registry, but that no longer works, and now I'm full of ideas.

    How have you tried to update the driver WLan?
    Have you tried to uninstall the driver first, and then after reboot again to install the new driver downloaded from Toshiba UE driver page?

    Try it!

    You said you reset the system in the past?
    How? Have you used the Toshiba recovery procedure and have you installed already preinstalled system once more?

  • Wireless network adapter does not work anymore and will not be repeated work without stopping the computer and then back on.

    Sometimes I leave my computer on at night.  Sometimes I notice that when I get back to him the next day that he has limited connection to the network I use.  When I try to disconnect it from the network, then reconnect, it says that it cannot connect.  Then, when I try to restart my computer it is sitting at a screen saying "stop down". "."  My wireless network software also is unaccessable in which she does not open and if I close the Task Manager and reopen it flashes for a second then closes.

    However when I turn it on manually and then turn it on again, which apparently is not good for the computer, I am once again able to connect to the network with full access.

    Can someone please tell me why this keeps happening and how to fix it?

    original title: unable to connect to a network.

    Hello

    Are you aware of any changes made to the computer, before the show?

    Method 1:

    Step 1: Safe Mode with networking

    Start your computer in safe mode with network and verify that the question.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Step 2: Clean boot

    If you are not facing the problem in safe mode with network, then put your computer in a clean boot and search for the issue.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.

    Method 2:

    Update the NIC drivers and check the issue.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Update drivers: recommended links

    http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

    Method 3:

    Run a virus scan and make sure.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
     
    Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

    I hope this helps.

  • S3-391 Acer wireless network adapter does not work after driver update

    Hi, I have an Acer Aspire S3-391 running Windows 7 64 bit and I have recently updated my card (Atheros AR5BMD222) wireless network to the latest version of such 10.0.0.274 as recommended by the Acer site.  After updating the driver, I can no longer connect to my wifi at home.  When I try to connect, I get the message that no wireless connection is available (even if all my other devices can see the wifi network) and when I diagnose the problem, it is said that there might be a problem with the wireless network card and that windows could not automatically bind the ip stack Protocol.  I tried to uninstall the new driver and reinstall one old and running a system restore before installing the new driver, both with no luck.  When I try to manually configure a wireless connection, I get message "an unexpected error has occurred."  I have an automatic DNS and IP address, and when I look at my ipconfig, IP, DNS, DHCP, etc all have addresses.  Any help would be greatly appreciated, thank you.

    And while playing, I managed to fall on a solution.  When I looked at the properties of my wireless network card, I have disabled NetBIOS over TCP/IP and now everything works fine.

  • Wireless network adapter does not work

    I get the error 10 and 31, and it won't let me access the internet

    Hello

    Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
    version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
    Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

    Check the site of the manufacturer of the system for latest driver.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    Download - SAVE - go where you put it - right click – RUN AS ADMIN.

    You can download several at once however restart after the installation of each of them.

    After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
    manufacturer of system become your backup policies).

    Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
    updated drivers.

    I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
    are almost always old, and you can search drivers manually as needed.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Update my wireless network device does not work after installation of Software Distribution Service 3.0

    After the installation of Software Distribution Service 3.0 update my wireless network camera does not work how do I uninstall Software Distribution Service 3.0

    How did you receive the update?

    Was it via Windows Update or Microsoft Update?

    Before the changes are made to your computer, the system restore points are made. This is so that you can go back in case an update causes problems.

    Follow these steps:

    1. click on the Start button

    2. click on accessories

    3. click on system tools

    4. click on system restore

    5. click on next

    6. in the calendar that appears, select the one which refers to Software Distribution Service 3.0 and click Next

    After the collection of certain data, the computer will restart, and the update will be gone.

    Hope this helps

    Post back if necessary

    ___________________________________________________________

    If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Atheros AR5007EG Wireless Network Adapter does not

    Hello

    My Atheros AR5007EG Wireless Network Adapter has stopped working. I tried to update a driver he says not installed correctly. I am running windows 7 32 bit

    There should be a little more characters for your PC model Toshiba laptop.  For example, here is the support page for the Toshiba Satellite L300 - ST3502--> http://support.toshiba.com/support/modelHome?freeText=2221250

    If it was your model, you click on the "Drivers & updates" tab, click on the "Wireless" link under "filter by" and then look for the link "Atheros Wireless LAN Driver for Windows 7 (32/64)" you get to a page where you can download the driver installation package.

    Download the driver appropriate for your computer (which may or may be not the same as in the above example) and run the installer.

  • Wireless network card does not work

    Pavilion dv6-6c01eo (A7Q69EA)

    Windows 7 64 bit

    Network controller is missing

    Have formatted the computer with a disc of CD windos 7 64 bit.

    Drivers updated via the HP Web site, downloaded all four pilots were of a single function, and it is sp54998.exe [1/1, 5.7 M] works. 3 other updates, sp55714.exe [1/1, 279.13 M] sp55805.exe [1/1, 11.55 M] sp56036.exe [1/1, 10.77 M] does not work. I have internet via an Ethernet cable, but I don't have internet through wireless netverk, it won't work because I have no driver for network controller. I need to download these drivers, where they work.

    Hello:

    Please click on the NIC in Device Manager.

    Then click on the Details tab.

    In the property drop-down list, select the second element (Hardware ID).

    After the first string of characters you see in the window.

    Who will be the ID of the model of the network adapter, and I'll send you the link to the drivers you need.

    HP is not sometimes the drivers for the cards they put in Notepad on the support page and pilot.

    Paul

  • Atheros AR5125 wireless network adapter does not

    Atheros AR5125 wireless network adapter not working not properly, says cannot find driver information too

    Any help, please notify!

    JudyB_729

    Judy

    What operating system do you use?  I would like to move to the section appropriate for your driver problem, but can't until I know.  BTW this section isn't for comments etc site technical support

  • My Atheros AR5007EG wireless network adapter will not work

    I have an Acer Aspire One AOA150ZG5 that only comes with Windows XP directly from the factory. I recently started having trouble with XP so I switched to Windows Vista Home Premium and now my wireless card doesn't work. I tried to go to the manufacturer's Web site, but they have only taken over XP, so I installed the XP driver and used the Vista Device Manager to update and it still does not work. Please help me I spent all my money on vista so I can't afford a new wireless card.

    If Acer is not taken support Vista for your model, there is nothing that can be done about it.

    Sorry about that.

    You can consult the Web site of the manufacturer of the wireless adapter.

    If they have no drivers Vista, same thing; nothing can be done about it.

    See you soon.

    Mick Murphy - Microsoft partner

  • Wireless network adapter does not not for Pavilion DV6000

    My Wi - Fi just stop working and I can't connect to my wifi at home more.  When I click on the wizard wireless in the Panel, nothing in charge.  Wifi switching active button disabled, shows nothing on the screen (which it used to) went into the Device Manager and says "this device does not work properly because windows cannot load the drivers required for this device" (code 31)

    Ive shut down the computer and a restore of the system for a few days before the show but has not resolve.

    Any questions/possible solutions? Thank you

    Try this driver and see if that fixes the problem.

    Vista:

    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3688870&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_88727_1%257CswEnvOID%253D2103%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

    XP:

    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3688870&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_101092_1%257CswEnvOID%253D1093%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  • For Portege 3490 AC adapter does not work with the Satellite A100-159

    I have a supply of 15V 120W car (or plane Kensington). It works very well with a Portege 3490CT. It doesn't do a thing with my Satellite A100-159 new. The power supply provides also 15 V 6 a. Can someone tell me why the Kensington work?

    Or does anyone have a diagram to a power supply adapted myself, preference of 11, 5-14, 12(4) and 24 VDC (23-28: 8)?

    Thanks in advance!

    Hello

    I can give t you an answer why it does not work but usually you need to use the adapter for vehicle recommended by Toshiba. Incorrect adapter may damage the laptop!
    I think that the card for Portege 3490 adapter is not compatible with Satellite A100

    That the two car/truck/Air 120W laptop charger must be compatible:
    PX1237E-1NPO
    PX1235E-1NPO

  • Sound does not work on my Satellite A200

    Hi guys,.

    Wondering that if you can offer me any advice, the sound does not work on my laptop. I tried to update the driver, but not luck. I did all the simple things like volume control, basic etc etc settings and I tried to do a system restore, but only restore point is yesterday, (which I think can be another problem, but anyway) it is after the problem began, is not good.

    Thanks for your help,

    GR

    Hello

    Can you please tell us what A200 you exactly (A200-xxx)?
    What operating system do you use?
    Are you using the original recovery Toshiba (Toshiba pre-installed Windows) image?

    Have you checked the Device Manager? Sound card not shown here?
    Open sound please properties > playback devices and do not forget that speakers of the option is enabled.

    Can you hear anything when you use headphones or headset?

  • Keyboard light FN (F6 - F7) does not work on the Satellite A200 - 1 GM

    Hello

    I turned on the Toshiba Satellite A200 - 1 g, a screen is almost completely obfuscate and try to lighten it, but it fails Fn...

    Note:

    Keyboard of the hospital should operate outside the windows, so that? ... then it may be a hardware failure?

    Please check what I could fix it, I would probably be reinstall everything in terms of software Satellite A200 - 1 g

    drivers: http://ce.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=CE&LNG=21&userAction=S MP_RESULTS_PAGE & partNumber = PSAECE-02C004CZ & serialNumber = k 87324302 & USER_ACTION = 20number % series

    Thanks in advance for the advice...

    Wait a minute I m a bit confused.

    When you start your laptop wait until the operating system load and then try to use the FN + F7. If this does not work, try changing the brightness of the display in power settings. It work?

    You can use other functions FN?
    Are you using the Vista operating system?

    By the way: what is keyboard hospital?

Maybe you are looking for