Wireless network does not appear without diagnose and repair when the PC is turned on
My wireless internet works fine when my laptop is running and up to 6 weeks ago, it was automatically available whenever I ran my laptop. Now, when I turned off and turn it back on, my laptop does not access my home network wireless until I have activate the "diagnose and repair network system. This system corrects what ever was wrong and active my network connection. It seems that I have some sort of 'switch' miss-set or the value manual (?) instead of ' Auto (?). Can someone tell me what I need to do to clear up this problem.
It is difficult to identify what could be wrong. I recommend that you delete the current wireless network connection entirely (make sure that you remove them completely - in the section Connections page sharing and management as well as the major networks wireless). Then recreate the connection to go from scratch using the appropriate settings (copy them down before you delete the 'old', if necessary) affecting particular it automatically to connect and see if that solves the problem.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Tags: Windows
Similar Questions
-
When I press email and attach the photo, my email 'box' does not appear as formerly, and still on the bottom of the screen it says "1 selected item." And I also waited for a period of time as well very reasonable. What can I do?
original title: EMAILING A PHOTO OF "LIBRARIES/IMAGES".Hi BrianS.OR,
1 are you referring to the client program webmail or email?
2. what e-mail on the computer client program do you use? Is - this Windows Mail or Windows Live Mail?
3. What size are the image files?
4. did you of recent changes on the system?
You can temporarily disable a security software and firewall installed on the system and check if the problem persists.
Note: Be sure to enable the security software on the computer after checking.
Hope this information is useful.
-
New wireless network does not appear on any computer
Thanks in advance for any help. OK, so I have a HP office connected to the internet through a router WRT54GS. I had 2 laptops connected to the NICU my wireless router. A (HP) laptop has built in wireless modem/adapter. The other laptop Dell was NICU equipped with a wireless adapter card. The problem is that the adapter on the basically dead Dell laptop, I don't give no internet connection. So I tried to install a more recent network card wireless linksys with speed on the cell phone booster. The instructions asked me to press the orange button on my router Cisco access point. I knew thatd be a problem. While the laptop connected to the internet, my old wireless network seems to be deleted. Installin the new card on the Dell laptop has created a connection b/t it and the router. The other laptop (HP) is now offline and not even a slate of the new network. So I tried to create a new wireless network on the main desktop computer. Now this new network is not detected by the wireless or portable printer. Other networks is detected if. Or the original linksys network is detected, Im not sure.
OK sorry for any confusion, but my basic problem is that my new wireless network is not detected on the laptop or the printer. I tried unpluggin the router. I also tried to manually in the network settings. I also tried to disable the firewall on my main computer. Nuthing worked. I checked the Device Manager, everything seems fine.
My router is just old? Its at least 4 years
I don't know what to do. Thanks again for your suggestions.
NVM, I got the impression to work. just installed it on the laptop wireless. I still can't get the 2nd adapter linksys to laptops to work. I'll ask for help in this section of the adapter.
-
My wireless home does not appear on as a network available on my work laptop and always did before. He brings up and connect on my laptop. I have a Linksys broadband router - summer use it for at least two years with no problems until this. I know that my wireless works on my laptop because there is an unsecured network listed in the available window.
A really strange thing that happened two weeks ago (and I don't know if it's related) was my personal laptop was fine during several hours - then he kept abandonment of the internet connection. I couldn't keep him connected - reboot etc didn't work. I've not logged again until today - and that's what I use now. He connected very well today.
My work laptop had been connected to my wireless ealier in the week, but when I tried to connect as usual Thursday night he has not logged automatically as it has always done in the past. Nothing has changed. Security patches that my company had sent through this week have not downloaded until after that I tried to connect and couldn't. There is nothing new - he had no reason to think I should not have automatically connected as I have in the past.
Hi suemoo,-What version of service pack of Windows XP you are using?This problem occurs because the media connect action is not sent to the wireless service correctly.Method 1: Disable and then enable the wireless network adapter and check if it helps fix the problem.To do this, follow these steps:a. start the network connections tool in Control Panel. Click Start, click Control Panel, click on network connections and Internetand then click on network connections.b. right click on wireless network connectionand then click disable.
c. right click on wireless network connectionand then click enable.
Method 2: Try the methods listed in the following article and check, if it helps in fixing the issue:
How to troubleshoot wireless network connections in Windows XP Service Pack 2
-
My niece has a laptop of HP under vista32 who cannot access the network wirelessly or wired. She is in College and needs the laptop on the network as soon as possible for his class work. I tried to reload the driver wireless driver (Atheros AR5007 b/g) and reset the tcp/ip stack using the command netsh addressed in the microsoft article, but nothing works.
I brought the laptop to work where we have an unsecured wireless lan (called comments) for visitors and the laptop can go out and find all points of access wireless including comments. When I select the comments and try to connect it times out and tells me to watch driver and tcp/ip connections.
Another clue may be that the wireless card does not appear when I type ' ipconfig/all', or the adapter wireless and wired adapters are not displayed:
C:\Users\Admin>ipconfig/all
Windows IP configuration
Name of the host...: Hannah-PC
Primary Dns suffix...:
Node... type: hybrid
Active... IP routing: No.
Active... proxy WINS: No.Bluetooth network connection Ethernet card:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Device Bluetooth (personal area network)
Physical address.... : 00-21-86-39-EE-22
DHCP active...: Yes
Autoconfiguration enabled...: YesC:\Users\Admin >
I'd appreciate any help I can get.
Thank you!
In the case where somone has this same question, I wanted to post my final resolution of the problem. I backed up its data and restored the laptop to factory default using HP restore and now everything works fine. Better I would say loading Zone Alarm on Vista was a bad thing for my niece to do. Would have been nice to find a magical solution to avoid restoring but never found one. Even after the alarm zone using their instructions by removing completely, there was apparently a problem with the registry who wouldn't let networks are working properly. One thing I noticed after that the restoration was the HP Wireless Assistant poped up and told me about available networks, etc. Assistant wireless didn't pop-up at all whne the cell was dismantled so maybe assistant was broken? Well, I'm out...
-
My wireless router does not appear when I shoot to the top of my devices. It shows my fax, modem, scanner and a few others. But not my belkin wireless. And when I try to add it, the system can't find it. Please help
Belkin support for your model, for installation instructions.
Your router will not appear in the devices
-
HP Officejet 4500 wireless printer does not appear on the control panel
My HP Officejet 4500 wireless printer does not appear on the control panel. How to fix it. I have a laptop Toshiba and Windows 7 Home Premium OS. Help, please. rwillm
Hey,.
Thanks for the update, rwillm. It seems that the installation of the printer can be a little messed up. If the printer software is always installed, but simply lacks the printer, then I would advise to do a little cleaning before choosing to add the printer back.
- Make sure that the printer is deleted from the file devices and printers
- Click on one of the remaining printers folder
- Select the properties of the print server at the top of the window
- Click the tab drivers
- Remove all drivers in this window for the Officejet 4500
Also check in the Device Manager to verify that there is no mention of remaining of the 4500.
- Click on the start menu
- Right click on computer
- Select manage in the list
- Click Device Manager in the list of questions on the left side of the window that opens
- Click the view at the top of the menu, and then select Show hidden devices
- Remove all references to the 4500 in the list of devices
After making sure of the device is gone, I recommend bike devices in the power circuit: router, computer and printer.
* Make sure the printer has a valid IP address after switching back on and is connected to the same network as your PC before adding the printer.
If the IP address and SSID are good for the printer, then try to add the printer with the printer software, you have installed.
- Click on the Start Menu
- Click on all programs
- Open the HP folder
- Open the folder for the series of the Officejet 4500 G510
- Select Add a device option
Let me know how it goes,
Jason
-
When bi-ecrans is used, and Firefox is on the second monitor, the Firefox menu does not appear. Same thing happens to the bar when typing already visited sites of addresses.
I have the same problem and I got rid of it by disabling hardware acceleration of rendering in the settings dialogue. Now I see the Firefox menu properly on a secondary monitor.
-
OT: Print processor.
During the installation of Blue ClickBook squirrel (for windows7) I get the message "the print processor does not appear to be installed corectly. The print processor is unknown. The printer name is invalid. Also "printer error code - 20 and the 1798 error.» I need CBWP. DLL to work properly in order to be able to use this program.Hi Chancey,
1. are you able to install other applications?
2. are you able to print from other applications?If the problem is with the book in a Blue Squirrel click, then I suggest you to contact the manufacturer for support.
-
At the same time, I got the sidebar gadget on my desktop. I removed all the gadgets, earlier, but now I want that they return once again. The instructions say do a right-click on the desktop and select gadgets. However, this option does not appear. How can I complete the sidebar gadget?
Go to: Start menu, all programs, accessories, Windows Sidebar.
Or: Check Control Panel, Windows Sidebar Properties,: Start Sidebar when Windows starts.
-
I have a new computer running windows but 10, 13 photoshop elements disc. Insert the disc does not start something going and looking at the files I do not see an installation executable. I don't know what to do.
Download from Download Photoshop Elements | 14, 13, 12, 11, 10
Install and enter your serial number.
-
I want to cancel and get my $$$ back, because the conversion using Adobe export in format PDF to Word does NOT, too many errors and inaccuracies in the Word DOC to use. Please cancel my order AD017941759 as soon as POSSIBLE! Thank you...
You will be eager to start here:
Cancel your subscription or membership. Acrobat, services Cloud of Document PDF
Be well...
-
Look does not recognize the weight class as exercise-how can you add the duration of activity manually because none of the presets etc for example elliptical is appropriate and therefore do not count toward the daily goal. Also does not count calories for example 35 when the average of the others in the group is around 500.
Hello
When you use the application of the training session, choose the type of activity that best fits your business. For anything else - like weight - select the other category.
During the follow-up of one year to the next helps:
- Activity app will credit the ring of progress of exercise with one minute for every minute of the workout.
- Active calories will be based on the data recorded by the heart rate sensor or a brisk walk, whichever is greater.
Note, however, that the heart rate sensor is likely to give better results for the workouts that involve rhythmic (for example running) rather than the irregular movements.
More information:
-
Local network does not appear in my computer, as if it does not exist.
"Help me please, I installed Windows XP on an old computer some time ago in an empty score, but then I tried to connect to the Internet, but he said that" the server is not found.
or something like that. When I see the network he wasn't there Local network as if it does not exist. I already checked if the cable was not there or if the network card has been broken, but all his past well. I am connected to another PC and it works very well. Help me guys, am I supossed to do?Sorry for my bad English, OscarHi Oscar,.
I suggest you to follow the steps in the Microsoft article and check if it helps.
Windows wireless and wired network connection problems
I hope this helps.
-
Windows 7 enterprise - wireless network does not work at the office
I'm a remote worker for a company. I travel offices across the United States and hit this problem before, but thought it was just a transitory problem. However, now I am in our headquarters and the problem has resurfaced. Essentially, networks under Windows 7 Enterprise associates for wireless access points but cannot obtain a DHCP address. I tried the usual: enough and ipconfig ipconfig / renew, I took it to our support people who confirmed that the configuration is correct, we have tried uninstalling the driver and put back in place, all in vain. The configuration of the machine is:
Dell Latitude E6400
Windows 7 Enterprise x 64
Wireless: Intel 5300 AGN
Driver:
Vendor: Intel
Version: 12.4.1.4
Digital signer: Microsoft
Path: C:\Windows\system32\DRIVERS\netw5v64.sys
The wireless works now in my office at home (I have a Windows 2003, Cisco 1200 AP domain and use WPA2 with PEAP to authenticate). Please note that the configuration has NOT changed since the last time I was in this office (about 3 weeks ago). We are a Windows 2008 R2 using NPS area (AFAIK). Help desk support people are completely baffled. The good news is that the cable works fine.
I have included the following diagnostic report (with the suppressed SSID):
----------------------------------------------------------------------------------------------------Diagnostic information (wireless connectivity)
Details on the diagnosis of wireless connectivity:
Information for a diagnosis of connection
The GUID of the interface: e3f4016b-a75e-4d88-96ba-8bd3f26f0fb4
Interface name: Intel(r) WiFi Link 5300 AGN
Interface type: Native WiFi
Connection incident diagnosed
Auto Configuration ID: 9
Login ID: 9
State of the connection summary
Connection started: 2010-11-30 14:12:24-133
Profile match: success
Pre-Association: success
Association: success
Security and authentication: success
List of visible access points: 6 item (s) total, 6 article (s) poster
BSSIDBSS Type PHY Signal (dB) channel/freq SSID
-------------------------------------------------------------------------
00-18-39-6E-51-6CInfra g-64 6
00-13-1A-3B-EE-A0Infra g-57 6
Da-ce-46-a2-9c-A1Ad hoc 6 g - 89
00-13-1A-3B-F2-90Infra g-82 1
00-1E-E5-A0-17-F0Infra g-53 2
00-13-1A-3B-F0-20Infra g-91 11
History of connection
Information for Auto 9 Configuration ID.
List of visible networks: 4 item (s) total, 4 article (s) poster
Type BSS PHYSecurity Signal (RSSI) Compatible SSID
------------------------------------------------------------------------------
Yes Yes Infrag 60
Infrag Yes Yes 99
Ad hocg No. 18 Yes
Yes Yes Infrag 78
List of favorite networks: 1 item (s)
Profile:
SSID:
SSID length: 10
Connection mode: Infra
Security: Yes
Defined by group policy: No.
Connect even if the network is not broadcasting: No.
Connectable: Yes
Information for the login ID 9
Connection started: 2010-11-30 14:12:24-133
Auto Configuration ID: 9
Profile:
SSID:
SSID length: 10
Connection mode: Infra
Security: Yes
Pre-Association and Association
The parameters of connectivity provided by hardware manufacturer (IHV): No.
Security settings provided by hardware manufacturer (IHV): No.
Profile matches network requirements: success
Pre-association status: success
The Association status: success
Last AP: 00-13-1a-3b-ee-a0
Security and authentication
Configured security type: open
Configured encryption type: WEP
802.1 x protocol: Yes
Authentication mode: Machine or user
EAP type: authentication not started
Number of 802. 1 X restarts: 1
Number of failures of 802,1: 0 X
802.1 x status: success
Key exchange initiated: Yes
Received unicast key: Yes
Received multicast key: Yes
Number of security packets received: 9
Number of security packets sent: 7
Decision of the attempt: success
Connectivity
Package statistics
NDIS Rx: 1725
NDIS Tx: 0
Unicast decrypt success: 1
Multicast decrypt success: 0
Unicast decrypt failure: 0
Multicast decrypt failure: 0
Rx success: 1531
Rx failure: 0
TX success: 5
TX failure: 0
Try TX: 0
TX retry number: 0
Life expectancy exceeded TX maximum: 0
Failure of TX ACK: 0
History of roaming: 0 item (s)
Information for Auto 8 Configuration ID.
List of visible networks: 1 item (s) total, 1 article (s) poster
Type BSS PHYSecurity Signal (RSSI) Compatible SSID
------------------------------------------------------------------------------
Yes Yes Infrag 80
List of favorite networks: 1 item (s)
Profile:
SSID:
SSID length: 10
Connection mode: Infra
Security: Yes
Defined by group policy: No.
Connect even if the network is not broadcasting: No.
Connectable: Yes
Information for the login ID 8
Connection started: 2010-11-30 12:56:40-041
Auto Configuration ID: 8
Profile:
SSID:
SSID length: 10
Connection mode: Infra
Security: Yes
Pre-Association and Association
The parameters of connectivity provided by hardware manufacturer (IHV): No.
Security settings provided by hardware manufacturer (IHV): No.
Profile matches network requirements: success
Pre-association status: success
The Association status: success
Last AP: 00-13-1a-3b-f0-20
Security and authentication
Configured security type: open
Configured encryption type: WEP
802.1 x protocol: Yes
Authentication mode: Machine or user
EAP type: authentication not started
Restart of number of 802. 1 X: 2
Number of failures of 802,1: 0 X
802.1 x status: success
Key exchange initiated: Yes
Received unicast key: Yes
Received multicast key: Yes
Number of security packets received: 13
Number of security packets sent: 11
Decision of the attempt: success
Connectivity
Package statistics
NDIS Rx: 0
NDIS Tx: 0
Unicast decrypt success: 1
Multicast decrypt success: 0
Unicast decrypt failure: 0
Multicast decrypt failure: 0
Rx success: 2262
Rx failure: 0
TX success: 59
TX failure: 0
Try TX: 19
TX retry multiples: 5
Life expectancy exceeded TX maximum: 0
TX ACK failure: 26
History of roaming: 1 item (s)
Schedule: 2010-11-30 12:57:48-302
Roamed from BSSID: 00-13-1a-3b-fa-f0
Reason: 0 x 00000003
Disconnected from BSSID: 00-00-00-00-00-00 reason: 0 x 00000205
Information for Automatic Configuration 7 ID.
List of visible networks: 1 item (s) total, 1 article (s) poster
Type BSS PHYSecurity Signal (RSSI) Compatible SSID
------------------------------------------------------------------------------
Infrag Yes Yes 99
List of favorite networks: 1 item (s)
Profile:
SSID:
SSID length: 10
Connection mode: Infra
Security: Yes
Defined by group policy: No.
Connect even if the network is not broadcasting: No.
Connectable: No.
Reason: 0 x 00028002
Information for the login ID 7
Connection started: 2010-11-30 12:55:47-670
Auto Configuration ID: 7
Profile:
SSID:
SSID length: 10
Connection mode: Infra
Security: Yes
Pre-Association and Association
The parameters of connectivity provided by hardware manufacturer (IHV): No.
Security settings provided by hardware manufacturer (IHV): No.
Profile matches network requirements: success
Pre-association status: success
The Association status: success
Last AP: 00-13-1a-3b-fa-f0
Security and authentication
Configured security type: open
Configured encryption type: WEP
802.1 x protocol: Yes
Authentication mode: Machine or user
EAP type: authentication not started
Number of 802. 1 X restarts: 1
Number of failures of 802,1: 0 X
802.1 x status: success
Key exchange initiated: Yes
Received unicast key: Yes
Received multicast key: Yes
Number of security packets received: 13
Number of security packets sent: 11
Decision of the attempt: success
Connectivity
Package statistics
NDIS Rx: 0
NDIS Tx: 0
Unicast decrypt success: 3
Multicast decrypt success: 0
Unicast decrypt failure: 0
Multicast decrypt failure: 0
Rx success: 288
Rx failure: 0
TX success: 49
TX failure: 0
Try TX: 19
TX retry multiples: 5
Life expectancy exceeded TX maximum: 0
TX ACK failure: 28
History of roaming: 1 item (s)
Schedule: 2010-11-30 12:56:36-732
Roamed from BSSID: 00-00-00-00-00-00
Reason: 0 x 00000007
Disconnected from BSSID: 00-00-00-00-00-00 reason: 0 x 00000205
Information for the login ID 6
Connection started: 2010-11-30 12:55:38-275
Auto Configuration ID: 7
Profile: Discovery connection
SSID:
SSID length: 10
Connection mode: Infra
Security: Yes
Pre-Association and Association
The parameters of connectivity provided by hardware manufacturer (IHV): No.
Security settings provided by hardware manufacturer (IHV): No.
Profile matches network requirements: success
Pre-association status: success
The Association status: success
Last AP: 00-13-1a-3b-f0-20
Security and authentication
Configured security type: open
Configured encryption type: WEP
802.1 x protocol: Yes
Authentication mode: disabled (5)
Restart of number of 802. 1 X: 3
Number of failures of X 802,1: 1
802.1 x status: failure 0 x 00000000
802.1 x reason code: 0 x 00050006
Key exchange initiated: No.
Number of security packets received: 8
Number of security packe
Diagnostic information (wireless connectivity)Details on the diagnosis of wireless connectivity:
For all the info on this session, see the event information of wireless connectivity.
Helper class: Auto-ConfigurationInitialize status: success
Information for a diagnosis of connectionThe GUID of the interface: e3f4016b-a75e-4d88-96ba-8bd3f26f0fb4Interface name: Intel(r) WiFi Link 5300 AGNInterface type: Native WiFi
Result of diagnosis: there may be problem
Diagnostic information (wireless network adapter)Details on the diagnosis of wireless network adapter:
For all the info on this session, see the event information of wireless connectivity.
Helper class: Native WiFi MSMInitialize status: success
Information for a diagnosis of connectionThe GUID of the interface: e3f4016b-a75e-4d88-96ba-8bd3f26f0fb4Interface name: Intel(r) WiFi Link 5300 AGNInterface type: Native WiFiProfile:SSID:SSID length: 10Connection mode: InfraSecurity: YesConnect even if the network is not broadcasting: No.
Result of diagnosis: there may be problem----------------------------------------------------------------------------------------------------
That's about all. If anyone can provide any indication as to why it would suddenly stop working, I would appreciate the help to solve this problem.
Ido
Ido Dubrawsky,
Thank you for visiting Microsoft Answers!
The question you have posted is related to networking in a commercial environment and would be better suited to the TechNet community.
Please visit the link below to find a community that will support what ask you:
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threadsCody C
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Problem installing WLAN Driver on Satellite C850-1CW
I had to reinstall the Windows the laptop provided with (I'm now on Windows 7) and so I need to get all the drivers. This proves to be a huge problem. According to the information of the system PCI WIFI card ID isPCI\VEN_10EC & DEV _8723 & SUBSYS_072
-
How can I configure DVD region free?
I have boutgh my knees to the United Kingdom. Back in my home country Brazil, I had a problem. The DVD region. I changed all the times that I have been authorized to do. And my computer is now set for region 2. Most of the dvd here are for region 4.
-
Nothing prints when I run a job.
My book is empty when I print. I cleaned the printer, unplug the cables and reconnected them. Twenty-four hours ago, everything was fine with the printer. He is 8 months old. PIXMA iP2702.
-
How can I change account limited user account for the administrative account information
Can you please help me find answer how to change account limited administrative user account information? I'm locked and I can not change any info because by mistake I select limited in my user account account.
-
I lost my cd, is it ok if I download an iso image and use my OWN windows xp pro key?
I really need help on this bad!