Wireless network does not work on Satellite A305-S6898

Similar Questions

• Wireless driver does not work on Satellite A30-PSA30E

  All the ideas that is suitable for the above model driver, I downloaded about 5 drivers wireless on the site, but none seems not to work.

  What do you mean with the driver does not work?

  Do you have an error message or what?

  Have you checked if your laptop supports a minPCI wireless network card?

  If your mobile phone does not support an internal WLan card then you will not be able to install the WLan card driver :) very simple

• Wireless network does not work properly on Equium A100-549

  I've tried so far with/without WPA PSK TKIP, WEP, OPEN, dynamic and static address, ipconfig/all configure TCP/IP manually and automatically updated drivers, all windows updates. I also tried with or without mac filtering.

  I install a good USB dongle known and tried all the foregoing the same I can instantly find the network cut and paste the password or type it in, it find instantly and the other around the street, but could not connect wireless connections, the icon in the task bar permanently a red x.

  If I can connect to the network I can put everything up. I have an XP, Office XP laptop and Vista DESKTOP base everything on laptop wireless WIFI on board, to an office on a dongle and the other with a PCI x 16 WI - FI card. on the laptop problem when you right-click the icon under display all connections, the status option is also low lit (can not select).
  It's like the driver is bad even if tosiba website says it's the right one to download when you fill out the form online, when you are looking there Web site for pilots.
  It's really annoying.

  Hello

  Satellite A100-549 PSAA4E was delivered with Atheros 11 b/g wireless network card.
  In this case the Atheros WLan client utility should be preinstalled on this OS.
  I advise to use this tool to configure WLan settings.

  In addition the wireless network card has been configured and set WLan channel 11. Please check if your router has been also on channel 11!

  I assume you are using the image of preinstalled Toshiba.
  This image contains the right WLan driver and usually the new installation is not necessary but if you are lloking for the new WLan driver I would recommend take a look here on this Toshiba WLan Center Portal:
  http://APS2.toshiba-tro.de/WLAN/

  Good bye

• Windows 7 enterprise - wireless network does not work at the office

  I'm a remote worker for a company.  I travel offices across the United States and hit this problem before, but thought it was just a transitory problem.  However, now I am in our headquarters and the problem has resurfaced.  Essentially, networks under Windows 7 Enterprise associates for wireless access points but cannot obtain a DHCP address.  I tried the usual: enough and ipconfig ipconfig / renew, I took it to our support people who confirmed that the configuration is correct, we have tried uninstalling the driver and put back in place, all in vain.  The configuration of the machine is:

  
  

  Dell Latitude E6400

  Windows 7 Enterprise x 64

  Wireless: Intel 5300 AGN

  Driver:

  Vendor: Intel

  Version: 12.4.1.4

  Digital signer: Microsoft

  Path: C:\Windows\system32\DRIVERS\netw5v64.sys

  The wireless works now in my office at home (I have a Windows 2003, Cisco 1200 AP domain and use WPA2 with PEAP to authenticate).  Please note that the configuration has NOT changed since the last time I was in this office (about 3 weeks ago).  We are a Windows 2008 R2 using NPS area (AFAIK).  Help desk support people are completely baffled.  The good news is that the cable works fine.

  I have included the following diagnostic report (with the suppressed SSID):

  ----------------------------------------------------------------------------------------------------

  Diagnostic information (wireless connectivity)

  Details on the diagnosis of wireless connectivity:

  
  

  Information for a diagnosis of connection

  The GUID of the interface: e3f4016b-a75e-4d88-96ba-8bd3f26f0fb4

  Interface name: Intel(r) WiFi Link 5300 AGN

  Interface type: Native WiFi

  
  

  Connection incident diagnosed

  Auto Configuration ID: 9

  Login ID: 9

  
  

  State of the connection summary

  Connection started: 2010-11-30 14:12:24-133

  Profile match: success

  Pre-Association: success

  Association: success

  Security and authentication: success

  
  

  List of visible access points: 6 item (s) total, 6 article (s) poster

  BSSIDBSS Type PHY Signal (dB) channel/freq SSID

  -------------------------------------------------------------------------

  00-18-39-6E-51-6CInfra g-64 6

  00-13-1A-3B-EE-A0Infra g-57 6

  Da-ce-46-a2-9c-A1Ad hoc 6 g - 89

  00-13-1A-3B-F2-90Infra g-82 1

  00-1E-E5-A0-17-F0Infra g-53 2

  00-13-1A-3B-F0-20Infra g-91 11

  History of connection

  
  

  Information for Auto 9 Configuration ID.

  
  

  List of visible networks: 4 item (s) total, 4 article (s) poster

  Type BSS PHYSecurity Signal (RSSI) Compatible SSID

  ------------------------------------------------------------------------------

  Yes Yes Infrag 60

  Infrag Yes Yes 99

  Ad hocg No. 18 Yes

  Yes Yes Infrag 78

  List of favorite networks: 1 item (s)

  Profile:

  SSID:

  SSID length: 10

  Connection mode: Infra

  Security: Yes

  Defined by group policy: No.

  Connect even if the network is not broadcasting: No.

  Connectable: Yes

  
  

  Information for the login ID 9

  Connection started: 2010-11-30 14:12:24-133

  Auto Configuration ID: 9

  Profile:

  SSID:

  SSID length: 10

  Connection mode: Infra

  Security: Yes

  Pre-Association and Association

  The parameters of connectivity provided by hardware manufacturer (IHV): No.

  Security settings provided by hardware manufacturer (IHV): No.

  Profile matches network requirements: success

  Pre-association status: success

  The Association status: success

  Last AP: 00-13-1a-3b-ee-a0

  Security and authentication

  Configured security type: open

  Configured encryption type: WEP

  802.1 x protocol: Yes

  Authentication mode: Machine or user

  EAP type: authentication not started

  Number of 802. 1 X restarts: 1

  Number of failures of 802,1: 0 X

  802.1 x status: success

  Key exchange initiated: Yes

  Received unicast key: Yes

  Received multicast key: Yes

  Number of security packets received: 9

  Number of security packets sent: 7

  Decision of the attempt: success

  Connectivity

  Package statistics

  NDIS Rx: 1725

  NDIS Tx: 0

  Unicast decrypt success: 1

  Multicast decrypt success: 0

  Unicast decrypt failure: 0

  Multicast decrypt failure: 0

  Rx success: 1531

  Rx failure: 0

  TX success: 5

  TX failure: 0

  Try TX: 0

  TX retry number: 0

  Life expectancy exceeded TX maximum: 0

  Failure of TX ACK: 0

  History of roaming: 0 item (s)

  
  

  Information for Auto 8 Configuration ID.

  
  

  List of visible networks: 1 item (s) total, 1 article (s) poster

  Type BSS PHYSecurity Signal (RSSI) Compatible SSID

  ------------------------------------------------------------------------------

  Yes Yes Infrag 80

  List of favorite networks: 1 item (s)

  Profile:

  SSID:

  SSID length: 10

  Connection mode: Infra

  Security: Yes

  Defined by group policy: No.

  Connect even if the network is not broadcasting: No.

  Connectable: Yes

  
  

  Information for the login ID 8

  Connection started: 2010-11-30 12:56:40-041

  Auto Configuration ID: 8

  Profile:

  SSID:

  SSID length: 10

  Connection mode: Infra

  Security: Yes

  Pre-Association and Association

  The parameters of connectivity provided by hardware manufacturer (IHV): No.

  Security settings provided by hardware manufacturer (IHV): No.

  Profile matches network requirements: success

  Pre-association status: success

  The Association status: success

  Last AP: 00-13-1a-3b-f0-20

  Security and authentication

  Configured security type: open

  Configured encryption type: WEP

  802.1 x protocol: Yes

  Authentication mode: Machine or user

  EAP type: authentication not started

  Restart of number of 802. 1 X: 2

  Number of failures of 802,1: 0 X

  802.1 x status: success

  Key exchange initiated: Yes

  Received unicast key: Yes

  Received multicast key: Yes

  Number of security packets received: 13

  Number of security packets sent: 11

  Decision of the attempt: success

  Connectivity

  Package statistics

  NDIS Rx: 0

  NDIS Tx: 0

  Unicast decrypt success: 1

  Multicast decrypt success: 0

  Unicast decrypt failure: 0

  Multicast decrypt failure: 0

  Rx success: 2262

  Rx failure: 0

  TX success: 59

  TX failure: 0

  Try TX: 19

  TX retry multiples: 5

  Life expectancy exceeded TX maximum: 0

  TX ACK failure: 26

  History of roaming: 1 item (s)

  Schedule: 2010-11-30 12:57:48-302

  Roamed from BSSID: 00-13-1a-3b-fa-f0

  Reason: 0 x 00000003

  Disconnected from BSSID: 00-00-00-00-00-00 reason: 0 x 00000205

  
  

  Information for Automatic Configuration 7 ID.

  
  

  List of visible networks: 1 item (s) total, 1 article (s) poster

  Type BSS PHYSecurity Signal (RSSI) Compatible SSID

  ------------------------------------------------------------------------------

  Infrag Yes Yes 99

  List of favorite networks: 1 item (s)

  Profile:

  SSID:

  SSID length: 10

  Connection mode: Infra

  Security: Yes

  Defined by group policy: No.

  Connect even if the network is not broadcasting: No.

  Connectable: No.

  Reason: 0 x 00028002

  
  

  Information for the login ID 7

  Connection started: 2010-11-30 12:55:47-670

  Auto Configuration ID: 7

  Profile:

  SSID:

  SSID length: 10

  Connection mode: Infra

  Security: Yes

  Pre-Association and Association

  The parameters of connectivity provided by hardware manufacturer (IHV): No.

  Security settings provided by hardware manufacturer (IHV): No.

  Profile matches network requirements: success

  Pre-association status: success

  The Association status: success

  Last AP: 00-13-1a-3b-fa-f0

  Security and authentication

  Configured security type: open

  Configured encryption type: WEP

  802.1 x protocol: Yes

  Authentication mode: Machine or user

  EAP type: authentication not started

  Number of 802. 1 X restarts: 1

  Number of failures of 802,1: 0 X

  802.1 x status: success

  Key exchange initiated: Yes

  Received unicast key: Yes

  Received multicast key: Yes

  Number of security packets received: 13

  Number of security packets sent: 11

  Decision of the attempt: success

  Connectivity

  Package statistics

  NDIS Rx: 0

  NDIS Tx: 0

  Unicast decrypt success: 3

  Multicast decrypt success: 0

  Unicast decrypt failure: 0

  Multicast decrypt failure: 0

  Rx success: 288

  Rx failure: 0

  TX success: 49

  TX failure: 0

  Try TX: 19

  TX retry multiples: 5

  Life expectancy exceeded TX maximum: 0

  TX ACK failure: 28

  History of roaming: 1 item (s)

  Schedule: 2010-11-30 12:56:36-732

  Roamed from BSSID: 00-00-00-00-00-00

  Reason: 0 x 00000007

  Disconnected from BSSID: 00-00-00-00-00-00 reason: 0 x 00000205

  
  

  Information for the login ID 6

  Connection started: 2010-11-30 12:55:38-275

  Auto Configuration ID: 7

  Profile: Discovery connection

  SSID:

  SSID length: 10

  Connection mode: Infra

  Security: Yes

  Pre-Association and Association

  The parameters of connectivity provided by hardware manufacturer (IHV): No.

  Security settings provided by hardware manufacturer (IHV): No.

  Profile matches network requirements: success

  Pre-association status: success

  The Association status: success

  Last AP: 00-13-1a-3b-f0-20

  Security and authentication

  Configured security type: open

  Configured encryption type: WEP

  802.1 x protocol: Yes

  Authentication mode: disabled (5)

  Restart of number of 802. 1 X: 3

  Number of failures of X 802,1: 1

  802.1 x status: failure 0 x 00000000

  802.1 x reason code: 0 x 00050006

  Key exchange initiated: No.

  Number of security packets received: 8

  Number of security packe

  Diagnostic information (wireless connectivity)
  Details on the diagnosis of wireless connectivity:

  
  

  For all the info on this session, see the event information of wireless connectivity.

  
  

  Helper class: Auto-Configuration

  Initialize status: success

  
  

  Information for a diagnosis of connection

  The GUID of the interface: e3f4016b-a75e-4d88-96ba-8bd3f26f0fb4

  Interface name: Intel(r) WiFi Link 5300 AGN

  Interface type: Native WiFi

  
  

  Result of diagnosis: there may be problem

  
  

  Diagnostic information (wireless network adapter)

  Details on the diagnosis of wireless network adapter:

  
  

  For all the info on this session, see the event information of wireless connectivity.

  
  

  Helper class: Native WiFi MSM

  Initialize status: success
  
  
  Information for a diagnosis of connection
  The GUID of the interface: e3f4016b-a75e-4d88-96ba-8bd3f26f0fb4
  Interface name: Intel(r) WiFi Link 5300 AGN
  Interface type: Native WiFi
  Profile:
  SSID:
  SSID length: 10
  Connection mode: Infra
  Security: Yes
  Connect even if the network is not broadcasting: No.
  
  
  Result of diagnosis: there may be problem
  ----------------------------------------------------------------------------------------------------
  
  
  That's about all.  If anyone can provide any indication as to why it would suddenly stop working, I would appreciate the help to solve this problem.
  
  Ido
  
  

  Ido Dubrawsky,

  Thank you for visiting Microsoft Answers!

  The question you have posted is related to networking in a commercial environment and would be better suited to the TechNet community.

  Please visit the link below to find a community that will support what ask you:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Wireless network does not work in hp mini 210-2013ee

  Hello

  My laptop can not find any wireless network, or even connect to the cable network.

  Model: HP Mini 210-2013ee
  Product number: XK405EA #ABV

  Note: I formatted and installed all the software drivers, everything works fine but the network!

  Sorry for my bad English, thank you very much.

  Hello:

  These are the two reasons you have no networking capability because they are your Wi-wired adapters and who needs drivers.

  Here they are...

  Wireless:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&DLC=en&LC=en

  Wired:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-93502-1&CC=US&DLC=en&LC=en&os=4062&Product=4326160&sw_lang=

  Paul

• a lexmark x 544 to connect to a wireless network does not work

  I HAVE a LEXMARK X 544 & can NOT GET IT ON MY WIRELESS NETWORK - I tried all three wep, wpa, wpa personal options with the key at the back of my router but no luck.  Help appreciated.

  Portable PS & other devices are connected wirelessly.

  Hi Amcfad,

  ·         What operating system is installed on your count?

  ·         You receive an error message?

  The majority of connection inside Windows 7 problems have been resolved by installing the latest driver for the device obtained from the manufacturer.

  http://support.Lexmark.com/index?page=product&locale=en&ProductCode=LEXMARK_X544&segment=support&UserLocale=en#1

  For more information about the update of drivers, see the article:

   

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  I hope this helps.

• Wireless network does not work when I put a password

  Well actually, I use a wireless network at home, and when I try to put a password, it won't let me connect to the internet, but my xbox connect when there is a password there and other laptops don't. When I try to connect by using a non-secure network it connects to the internet, but on any other laptop but mine it asks me to set up the connection, while on my laptop, it goes straight to a connection.

  If you guys can offer me a solution to this problem, I would be very grateful

  Hi Sh4dow,

  You can check out the following link and check if it helps:

  View your preferred wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/view-your-preferred-wireless-networks

  You can also temporarily disable the security software and firewall installed on the system and check if the problem persists. If this resolves the problem, then you may need to update or change the settings of the security software.

  Note: Be sure to enable the security software on the computer after checking.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite L550D-10J: wireless network does not work in Windows 7 drivers?

  I upgraded my Satellite L550D-10J to Windows 7, but can not get my wireless to work. I can't find the drivers for wireless LAN. I assumed that "network controller" is related to the network wireless but don't not find drivers for it to be.

  Solutions or suggestions?

  Hi mate,

  Theoretically, network controller can mean both WLAN or LAN card.

  Anyway, if you need driver WLAN, you can visit the Toshiba WLAN portal. There, you can always get the latest WLAN drivers:
  http://APS2.toshiba-tro.de/WLAN/

  As far as I know Satellite L550D has Realtek WLAN card.

  Welcome them

• my (wzc) wireless network does not work on my acer

  When I use my network wireless on my acer (aspire 3690) it indicates to come to microsoft. com and look more can article 871122 someone help with this one.

  (1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).

  (2) START, CONNECT, WIRELESS INTERNET CONNECTION

  --> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~!  (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;

  --> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network

  3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)

• Satellite Pro L40 - wireless adapter does not work - Vista

  I recently had some problems with my laptop.
  A couple of weeks, I put in a disc of OpenSuse.
  It's not stable anything, but locked me out of my original Vista operating system.

  I reinstallled Vista Home Basic, but there are a few problems.
  Mainly, my wireless adapter does not work.

  When I flip the button to turn it on nothing happens and it is not recognized in Windows.
  I installed Atheros Driver, but still nothing happens, light is not yet.

  Any advice?

  Hello

  First check the device-> network adapters area manager
  You see the WLan card? Or the unknown device appears?

  If there is an unknown device, then the WLan driver has not been installed correctly or you tried to install a driver badly these two options are possible.

  Remember that your wireless network card? Maybe it was a Realtek WLan card?

  If it's a Realtek WLan card, try the WLan driver from the Realtek website and look for 802.11 g (RTL8187B) chip or you will simply check the page of the European driver Toshiba too the Realtek WLan driver also appeared on the Toshiba page

• Someone in the building uses Apple can 790-795 network this person hack me and who is? Berlin writes. Very often, I notice that my network does not work as it should.

  Someone in the building uses Apple can 790-795 network this person hack me and who is? Berlin writes. Very often, I notice that my network does not work as it should. Thank you. I'm really not sure if it's true that Apple can´t be hackend? First because I use Google and Google mail on the same computer.

  Someone in the building uses Apple can 790-795 network this person hack me and who is?

  Wi - Fi networks will be displayed in the menu OS X Wi - Fi, including those created by other Apple routers. It's normal. It does not necessarily indicate that users connected to these networks can connect to yours. In particular, if you use a wireless password and change it often.

• Photosmart Premium Fax c309 Series all in one printer Wireless Radio does not work

  Some time before, the radio on my Photosmart Premium Fax c309 series wireless all in one printer stops working.

  With a wireless network test:

  Wireless is on (but light indication only is not lit)

  wireless network card has failed

  "The wireless radio does not work.  Contact Hp support.

  Any help would be greatly appreciated!

  Thank you

  Smithb2

  Hi smithb2, welcome to the forums there.

  I saw your post on the wireless radio does not not on your model Photosmart C309.

  I did some research and came across this post in the community that seemed to have worked for others with the same problem.

  Re: Without the printer wireless radio does not

  I hope that helps!

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  Have a great Thursday

• Once I changed my ISP my computer network does not work and does not recognize my router lynsys

  Once I changed my ISP my computer network does not work and does not recognize my router lynsys

  Hi George,.
  Please go to the Microsoft Community Forums.
   
  1. do you get an error message?
  2. do you have the internet connection wired or wireless?
  3. What is the brand and model of the computer?
   
  I suggest to refer to the links and follow the steps in the articles:
   
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help?T1=Tab03#network-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
  Resources for the resolution of the problems of modem in Windows XP
  http://support.Microsoft.com/kb/308022#top
   
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702
   
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357#appliesTo
   
  If the problem persists, contact the Internet service provider for assistance.
   
  I hope this helps.

• Wireless device does not work after downgrading from Windows 7 to Windows Vista.

  Original title: wireless device does not.

  recently, I got my os from windows 7 to vista, now my wireless device does not work. I checked the Device Manager and the report shows that my network controller driver is not installed and the modem on high definition audio bus device. I tried to install it, but in vain. What should I do?

  If your computer manufacturer does not have Windows Vista drivers available, you're probably out of luck.  Without drivers for these devices will not work.

  'spyc' wrote in the new message: * e-mail address is removed from the privacy... *

  recently, I got my os from windows 7 to vista, now my wireless device does not work. I checked the Device Manager and the report shows that my network controller driver is not installed and the modem on high definition audio bus device. I tried to install it, but in vain. What should I do?

• The wireless radio does not work

  The wireless radio does not work on my HP Photosmart C309a (Vista 32 - bit) - support contact HP on the wireless network Test report

  The number of UK should be 0844 369 0369