Wireless network does not work when I put a password
Well actually, I use a wireless network at home, and when I try to put a password, it won't let me connect to the internet, but my xbox connect when there is a password there and other laptops don't. When I try to connect by using a non-secure network it connects to the internet, but on any other laptop but mine it asks me to set up the connection, while on my laptop, it goes straight to a connection.
If you guys can offer me a solution to this problem, I would be very grateful
Hi Sh4dow,
You can check out the following link and check if it helps:
View your preferred wireless networks
http://Windows.Microsoft.com/en-us/Windows-Vista/view-your-preferred-wireless-networks
You can also temporarily disable the security software and firewall installed on the system and check if the problem persists. If this resolves the problem, then you may need to update or change the settings of the security software.
Note: Be sure to enable the security software on the computer after checking.
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Tags: Windows
Similar Questions
-
"Wireless radio does not work" when the Diagnostic tool is run
Recently, I unplugged my C309a HP Photosmart Premium and he moved to a new Tablet next to my main computer. Wireless network card works perfectly before the move, and now it does not detect networks to connect to. I have run the wireless network test report and it says "Wireless Radio does not work. Contact HP support. "I can do here to help solve this problem, or I have to pay for repairs somewhere? I want to believe that this HP product can support more than a simple passage of one shelf to another...
Any suggestions would be greatly appreciated!
* Note * I know my network works correctly (because I'm connected to it now...). My computer detects my network as well as several others in the neighborhood.
Is the printer still under warranty? If yes you can not he repaired, but it can cost almost what a new printer costs. Here is how to contact HP.
Your printer must be able to work with USB and it should also be able to be connected to your router with an Ethernet cable.
-
my memory card for my digital camera does not work when I put it in the memory card slot
I use vista and a emachine El 1200-07w. It worked last week I just stuck the memory card and a menu pops up saying what are the options I could do (for example, open the folder, etc.) now, when I put the memory card in nothing happens, but if the memory card is in when the computer is turned on, then he will say new hardware detected but it can't find a driver for it. Why is it does not work now, but was last week and how the hell can solve this problem. I have no software for my digital camera, I always just went out the memory card it stuck in the memory card slot and it was very good. It's just a less expensive memory card (Lexar) I have a 2 GB and 128 MB and will no longer work. Thanks for any help!
Hi, I hope you can follow this. Remove the storage card from the computer, then go to control panel
then
Device Manager
Expand portable devices
the type of memory card slots should be listed if your type is a yellow triangle in it,
Right-click on it and choose uninstall.
It should reinstall it automatically or when you put the memory card in the slot.
This type of fault is often caused by not using material on the taskbar does not safely remove request. -
Wireless network does not work properly on Equium A100-549
I've tried so far with/without WPA PSK TKIP, WEP, OPEN, dynamic and static address, ipconfig/all configure TCP/IP manually and automatically updated drivers, all windows updates. I also tried with or without mac filtering.
I install a good USB dongle known and tried all the foregoing the same I can instantly find the network cut and paste the password or type it in, it find instantly and the other around the street, but could not connect wireless connections, the icon in the task bar permanently a red x.
If I can connect to the network I can put everything up. I have an XP, Office XP laptop and Vista DESKTOP base everything on laptop wireless WIFI on board, to an office on a dongle and the other with a PCI x 16 WI - FI card. on the laptop problem when you right-click the icon under display all connections, the status option is also low lit (can not select).
It's like the driver is bad even if tosiba website says it's the right one to download when you fill out the form online, when you are looking there Web site for pilots.
It's really annoying.Hello
Satellite A100-549 PSAA4E was delivered with Atheros 11 b/g wireless network card.
In this case the Atheros WLan client utility should be preinstalled on this OS.
I advise to use this tool to configure WLan settings.In addition the wireless network card has been configured and set WLan channel 11. Please check if your router has been also on channel 11!
I assume you are using the image of preinstalled Toshiba.
This image contains the right WLan driver and usually the new installation is not necessary but if you are lloking for the new WLan driver I would recommend take a look here on this Toshiba WLan Center Portal:
http://APS2.toshiba-tro.de/WLAN/Good bye
-
Windows 7 enterprise - wireless network does not work at the office
I'm a remote worker for a company. I travel offices across the United States and hit this problem before, but thought it was just a transitory problem. However, now I am in our headquarters and the problem has resurfaced. Essentially, networks under Windows 7 Enterprise associates for wireless access points but cannot obtain a DHCP address. I tried the usual: enough and ipconfig ipconfig / renew, I took it to our support people who confirmed that the configuration is correct, we have tried uninstalling the driver and put back in place, all in vain. The configuration of the machine is:
Dell Latitude E6400
Windows 7 Enterprise x 64
Wireless: Intel 5300 AGN
Driver:
Vendor: Intel
Version: 12.4.1.4
Digital signer: Microsoft
Path: C:\Windows\system32\DRIVERS\netw5v64.sys
The wireless works now in my office at home (I have a Windows 2003, Cisco 1200 AP domain and use WPA2 with PEAP to authenticate). Please note that the configuration has NOT changed since the last time I was in this office (about 3 weeks ago). We are a Windows 2008 R2 using NPS area (AFAIK). Help desk support people are completely baffled. The good news is that the cable works fine.
I have included the following diagnostic report (with the suppressed SSID):
----------------------------------------------------------------------------------------------------Diagnostic information (wireless connectivity)
Details on the diagnosis of wireless connectivity:
Information for a diagnosis of connection
The GUID of the interface: e3f4016b-a75e-4d88-96ba-8bd3f26f0fb4
Interface name: Intel(r) WiFi Link 5300 AGN
Interface type: Native WiFi
Connection incident diagnosed
Auto Configuration ID: 9
Login ID: 9
State of the connection summary
Connection started: 2010-11-30 14:12:24-133
Profile match: success
Pre-Association: success
Association: success
Security and authentication: success
List of visible access points: 6 item (s) total, 6 article (s) poster
BSSIDBSS Type PHY Signal (dB) channel/freq SSID
-------------------------------------------------------------------------
00-18-39-6E-51-6CInfra g-64 6
00-13-1A-3B-EE-A0Infra g-57 6
Da-ce-46-a2-9c-A1Ad hoc 6 g - 89
00-13-1A-3B-F2-90Infra g-82 1
00-1E-E5-A0-17-F0Infra g-53 2
00-13-1A-3B-F0-20Infra g-91 11
History of connection
Information for Auto 9 Configuration ID.
List of visible networks: 4 item (s) total, 4 article (s) poster
Type BSS PHYSecurity Signal (RSSI) Compatible SSID
------------------------------------------------------------------------------
Yes Yes Infrag 60
Infrag Yes Yes 99
Ad hocg No. 18 Yes
Yes Yes Infrag 78
List of favorite networks: 1 item (s)
Profile:
SSID:
SSID length: 10
Connection mode: Infra
Security: Yes
Defined by group policy: No.
Connect even if the network is not broadcasting: No.
Connectable: Yes
Information for the login ID 9
Connection started: 2010-11-30 14:12:24-133
Auto Configuration ID: 9
Profile:
SSID:
SSID length: 10
Connection mode: Infra
Security: Yes
Pre-Association and Association
The parameters of connectivity provided by hardware manufacturer (IHV): No.
Security settings provided by hardware manufacturer (IHV): No.
Profile matches network requirements: success
Pre-association status: success
The Association status: success
Last AP: 00-13-1a-3b-ee-a0
Security and authentication
Configured security type: open
Configured encryption type: WEP
802.1 x protocol: Yes
Authentication mode: Machine or user
EAP type: authentication not started
Number of 802. 1 X restarts: 1
Number of failures of 802,1: 0 X
802.1 x status: success
Key exchange initiated: Yes
Received unicast key: Yes
Received multicast key: Yes
Number of security packets received: 9
Number of security packets sent: 7
Decision of the attempt: success
Connectivity
Package statistics
NDIS Rx: 1725
NDIS Tx: 0
Unicast decrypt success: 1
Multicast decrypt success: 0
Unicast decrypt failure: 0
Multicast decrypt failure: 0
Rx success: 1531
Rx failure: 0
TX success: 5
TX failure: 0
Try TX: 0
TX retry number: 0
Life expectancy exceeded TX maximum: 0
Failure of TX ACK: 0
History of roaming: 0 item (s)
Information for Auto 8 Configuration ID.
List of visible networks: 1 item (s) total, 1 article (s) poster
Type BSS PHYSecurity Signal (RSSI) Compatible SSID
------------------------------------------------------------------------------
Yes Yes Infrag 80
List of favorite networks: 1 item (s)
Profile:
SSID:
SSID length: 10
Connection mode: Infra
Security: Yes
Defined by group policy: No.
Connect even if the network is not broadcasting: No.
Connectable: Yes
Information for the login ID 8
Connection started: 2010-11-30 12:56:40-041
Auto Configuration ID: 8
Profile:
SSID:
SSID length: 10
Connection mode: Infra
Security: Yes
Pre-Association and Association
The parameters of connectivity provided by hardware manufacturer (IHV): No.
Security settings provided by hardware manufacturer (IHV): No.
Profile matches network requirements: success
Pre-association status: success
The Association status: success
Last AP: 00-13-1a-3b-f0-20
Security and authentication
Configured security type: open
Configured encryption type: WEP
802.1 x protocol: Yes
Authentication mode: Machine or user
EAP type: authentication not started
Restart of number of 802. 1 X: 2
Number of failures of 802,1: 0 X
802.1 x status: success
Key exchange initiated: Yes
Received unicast key: Yes
Received multicast key: Yes
Number of security packets received: 13
Number of security packets sent: 11
Decision of the attempt: success
Connectivity
Package statistics
NDIS Rx: 0
NDIS Tx: 0
Unicast decrypt success: 1
Multicast decrypt success: 0
Unicast decrypt failure: 0
Multicast decrypt failure: 0
Rx success: 2262
Rx failure: 0
TX success: 59
TX failure: 0
Try TX: 19
TX retry multiples: 5
Life expectancy exceeded TX maximum: 0
TX ACK failure: 26
History of roaming: 1 item (s)
Schedule: 2010-11-30 12:57:48-302
Roamed from BSSID: 00-13-1a-3b-fa-f0
Reason: 0 x 00000003
Disconnected from BSSID: 00-00-00-00-00-00 reason: 0 x 00000205
Information for Automatic Configuration 7 ID.
List of visible networks: 1 item (s) total, 1 article (s) poster
Type BSS PHYSecurity Signal (RSSI) Compatible SSID
------------------------------------------------------------------------------
Infrag Yes Yes 99
List of favorite networks: 1 item (s)
Profile:
SSID:
SSID length: 10
Connection mode: Infra
Security: Yes
Defined by group policy: No.
Connect even if the network is not broadcasting: No.
Connectable: No.
Reason: 0 x 00028002
Information for the login ID 7
Connection started: 2010-11-30 12:55:47-670
Auto Configuration ID: 7
Profile:
SSID:
SSID length: 10
Connection mode: Infra
Security: Yes
Pre-Association and Association
The parameters of connectivity provided by hardware manufacturer (IHV): No.
Security settings provided by hardware manufacturer (IHV): No.
Profile matches network requirements: success
Pre-association status: success
The Association status: success
Last AP: 00-13-1a-3b-fa-f0
Security and authentication
Configured security type: open
Configured encryption type: WEP
802.1 x protocol: Yes
Authentication mode: Machine or user
EAP type: authentication not started
Number of 802. 1 X restarts: 1
Number of failures of 802,1: 0 X
802.1 x status: success
Key exchange initiated: Yes
Received unicast key: Yes
Received multicast key: Yes
Number of security packets received: 13
Number of security packets sent: 11
Decision of the attempt: success
Connectivity
Package statistics
NDIS Rx: 0
NDIS Tx: 0
Unicast decrypt success: 3
Multicast decrypt success: 0
Unicast decrypt failure: 0
Multicast decrypt failure: 0
Rx success: 288
Rx failure: 0
TX success: 49
TX failure: 0
Try TX: 19
TX retry multiples: 5
Life expectancy exceeded TX maximum: 0
TX ACK failure: 28
History of roaming: 1 item (s)
Schedule: 2010-11-30 12:56:36-732
Roamed from BSSID: 00-00-00-00-00-00
Reason: 0 x 00000007
Disconnected from BSSID: 00-00-00-00-00-00 reason: 0 x 00000205
Information for the login ID 6
Connection started: 2010-11-30 12:55:38-275
Auto Configuration ID: 7
Profile: Discovery connection
SSID:
SSID length: 10
Connection mode: Infra
Security: Yes
Pre-Association and Association
The parameters of connectivity provided by hardware manufacturer (IHV): No.
Security settings provided by hardware manufacturer (IHV): No.
Profile matches network requirements: success
Pre-association status: success
The Association status: success
Last AP: 00-13-1a-3b-f0-20
Security and authentication
Configured security type: open
Configured encryption type: WEP
802.1 x protocol: Yes
Authentication mode: disabled (5)
Restart of number of 802. 1 X: 3
Number of failures of X 802,1: 1
802.1 x status: failure 0 x 00000000
802.1 x reason code: 0 x 00050006
Key exchange initiated: No.
Number of security packets received: 8
Number of security packe
Diagnostic information (wireless connectivity)Details on the diagnosis of wireless connectivity:
For all the info on this session, see the event information of wireless connectivity.
Helper class: Auto-ConfigurationInitialize status: success
Information for a diagnosis of connectionThe GUID of the interface: e3f4016b-a75e-4d88-96ba-8bd3f26f0fb4Interface name: Intel(r) WiFi Link 5300 AGNInterface type: Native WiFi
Result of diagnosis: there may be problem
Diagnostic information (wireless network adapter)Details on the diagnosis of wireless network adapter:
For all the info on this session, see the event information of wireless connectivity.
Helper class: Native WiFi MSMInitialize status: success
Information for a diagnosis of connectionThe GUID of the interface: e3f4016b-a75e-4d88-96ba-8bd3f26f0fb4Interface name: Intel(r) WiFi Link 5300 AGNInterface type: Native WiFiProfile:SSID:SSID length: 10Connection mode: InfraSecurity: YesConnect even if the network is not broadcasting: No.
Result of diagnosis: there may be problem----------------------------------------------------------------------------------------------------
That's about all. If anyone can provide any indication as to why it would suddenly stop working, I would appreciate the help to solve this problem.
Ido
Ido Dubrawsky,
Thank you for visiting Microsoft Answers!
The question you have posted is related to networking in a commercial environment and would be better suited to the TechNet community.
Please visit the link below to find a community that will support what ask you:
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threadsCody C
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Wireless network does not work on Satellite A305-S6898
Hi all
I just wanted to know why my wireless device doesn't work anymore. There for awhile he last internet connection detection.
Would it be a malfunction of the pilot or something else?Thanks in advance for any assistance.
Hello
> . Would it be a malfunction of the pilot or something else?
Yes, it can be. First of all, download driver Wlan:
http://APS2.toshiba-tro.de/WLAN/?page=downloads
If this does not resolve your problem, we will think what to do next...
-
Hi all, I have an Aspire Z3-61 that the keyboard is not connected when turned on. If I restart the computer, it works fine. of course turn on/off and rebooting is not the best way that I would get my keyboard works. It does not have to use the on-screen keyboard, and to start windows. I have to restart it to connect. Thanks in advance for any help.
An alternative workaround that I used when I had the problem was to disable the Windows quick start.
http://www.eightforums.com/tutorials/6320-fast-startup-turn-off-Windows-8-a.html
-
Wireless network does not work in hp mini 210-2013ee
Hello
My laptop can not find any wireless network, or even connect to the cable network.
Model: HP Mini 210-2013ee
Product number: XK405EA #ABVNote: I formatted and installed all the software drivers, everything works fine but the network!
Sorry for my bad English, thank you very much.
Hello:
These are the two reasons you have no networking capability because they are your Wi-wired adapters and who needs drivers.
Here they are...
Wireless:
http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&DLC=en&LC=en
Wired:
Paul
-
a lexmark x 544 to connect to a wireless network does not work
I HAVE a LEXMARK X 544 & can NOT GET IT ON MY WIRELESS NETWORK - I tried all three wep, wpa, wpa personal options with the key at the back of my router but no luck. Help appreciated.
Portable PS & other devices are connected wirelessly.
Hi Amcfad,
· What operating system is installed on your count?
· You receive an error message?
The majority of connection inside Windows 7 problems have been resolved by installing the latest driver for the device obtained from the manufacturer.
For more information about the update of drivers, see the article:
Update drivers: recommended links
http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links
I hope this helps.
-
Satellite L550D-10J: wireless network does not work in Windows 7 drivers?
I upgraded my Satellite L550D-10J to Windows 7, but can not get my wireless to work. I can't find the drivers for wireless LAN. I assumed that "network controller" is related to the network wireless but don't not find drivers for it to be.
Solutions or suggestions?
Hi mate,
Theoretically, network controller can mean both WLAN or LAN card.
Anyway, if you need driver WLAN, you can visit the Toshiba WLAN portal. There, you can always get the latest WLAN drivers:
http://APS2.toshiba-tro.de/WLAN/As far as I know Satellite L550D has Realtek WLAN card.
Welcome them
-
my (wzc) wireless network does not work on my acer
When I use my network wireless on my acer (aspire 3690) it indicates to come to microsoft. com and look more can article 871122 someone help with this one.
(1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).
(2) START, CONNECT, WIRELESS INTERNET CONNECTION
--> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~! (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;
--> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network
3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)
-
Wireless mouse does not work when it is docked.
I have a new laptop Latitude E7440, with a mouse Dell Wireless and E-series docking station. When it is docked, the wireless mouse is disabled. Receiver must USB mouse be connected to the docking station to make it work? It would be quite embarrassing.
Thank you
live
Hi dwells1957,
Thanks for the post! Looks like you might have the USB receiver connected to the USB ports on the back of the system? While anchored feature transfers E7440 of ports at the back of the unit to the Wharf (by disabling these ports).
Rear ports Latitude E7440 & E7240 system are disabled when it is docked on an E-port I / II or E-port Plus I / II
http://www.Dell.com/support/article/us/en/04/SLN290782/en
If you connect the USB receiver on the dock or on the USB port on the side of the system, it should work correctly when it is connected to the docking station.
Kind regards
-
Satellite A100 - line number on the keyboard does not work when you enter the password
I have an A100 / Pro A100 series satellite laptop, what ever that means.
Anyway, when you turn the laptop on and asked for a password, I am unable to put in number.
It appears to the integer line, including BACKSPACE don't work.I can use the mouse to select and remove, but that leaves a mark of character in the password box.
Other buttons work except the row number.If I need to connect an external keyboard to verify where I connect (if I can)?
Any help would be great.Can I change the keyboard?
Hello
trying to connect a keyboard external usb to check it out. Yes, you can change the keyboard of laptop and it is not a complicated procedure.
Details how to change keyboard, you can find hereirisvista.com
Welcome them
-
my wireless keyboard does not work with windows xp
Hello
I installed osx el capitan yesterday.
My wireless keyboard does not work when I'm on windows xp. For the mouse is ok.
And no problems with OSX el Capitan.
Thank you very much for the help.
Boblecingle
Windows XP is now fifteen years old.
Are using you it on a Mac somehow, for some reason any?
-
Satellite Pro L40 - wireless adapter does not work - Vista
I recently had some problems with my laptop.
A couple of weeks, I put in a disc of OpenSuse.
It's not stable anything, but locked me out of my original Vista operating system.I reinstallled Vista Home Basic, but there are a few problems.
Mainly, my wireless adapter does not work.When I flip the button to turn it on nothing happens and it is not recognized in Windows.
I installed Atheros Driver, but still nothing happens, light is not yet.Any advice?
Hello
First check the device-> network adapters area manager
You see the WLan card? Or the unknown device appears?If there is an unknown device, then the WLan driver has not been installed correctly or you tried to install a driver badly these two options are possible.
Remember that your wireless network card? Maybe it was a Realtek WLan card?
If it's a Realtek WLan card, try the WLan driver from the Realtek website and look for 802.11 g (RTL8187B) chip or you will simply check the page of the European driver Toshiba too the Realtek WLan driver also appeared on the Toshiba page
Maybe you are looking for
-
Contacts, not able to connect to Office 365
Hi all Suddenly, I have a problem connecting OSX Contacts to Office 365/Exchange contacts. They certainly were able to load at some point, but recently started error (not sure if it was after an OSX update or a 365 tenant who is behind the scenes). A
-
How to restore an album to my music which was deleted and bought in itunes
I deleted an album from my iphone on the assumption that there is in my music on my computer in itunes. It no longer appears in my music and I followed the instructions found on different sites for the "low loading of previous purchases from the itu
-
How do run you chkdsk /f. _
I am trying to run disk defragmentation and get a red message X saying that dskchk is expected to run on the volume, Rundskchk, f. I recently installed spybot and anti-virus / anti-spyware on security (free from my ISP provider... CA Mediacom)I've ne
-
can not put ACS 5.2 to 5.3
I have a brand new ACS version 5.2. Everything works fine. I go to cisco Web site and download the following programs: 5-2-0-26 - 8.tar.gpg ACS_5.3.0.40.tar.gz -J' then downloaded these files on my server Linux CentOS -I then go into the user inter
-
Irretrievably broken Lightroom - move to Capture One?
I had six months of lightroom crashes and zero bugs. Now I can't even use it to capture images of a new RX10iii from SONY.Fortunately, sony provided a free version of Phase One Capture One that works very well. I have seven years of images in Lightro