Wireless network problem unable to connect to Kodak ESP7 All In One Printer wireless. Windows 7

Similar Questions

• Dell Inspiron 530sand by Kodak ESP5 all-in One Printer not detected in Windows Vista.

  Original title: cannot find the printer

  I have a s 530 Dell Inspiron and a Kodak ESP5 All in One Printer. The problem began earlier this year when attempts to print failed because of "jobs in"

  the pipeline "or something.  No matter what I did the same blocking returned.  I emailed Kodak and they spent ages uninstall/re-installing the

  software all for nothing helps.  Then I tried the automated Microsoft Fix it Center but I got nowhere so eventually abandoned.  Now I need the printer again only

  This time, I can't find any sign of it on the computer.  The icon at the bottom right has disappeared and when I bring to the top of the order page and click

  Printers, an empty box appears.  The usb cable has been replaced and tried other usb ports.  Nothing.  I tried the Fix it Center again and if

  anyone from Microsoft read this, was sent around in circles.  By clicking "Run" tells me there is a temporary outage preventing the Printer Wizard

  operating for two weeks?  And try to communicate with the web home page has a similar result, I like my email address is registered, but when I use it

  told me to use another, who is also rejected because the first is already registered. All this may be my fault I'm semi illiterate computerwise

  If no one can say why won't the computer to the printer, I would be very grateful and more if the answer was in terms laymans

  My thanks in advance

  Peter

  Hi Peter,.

  Thanks for posting this question in the Microsoft Community.

  I understand that it must be frustrating, but don't worry, we are here to help solve the problem and guide you in the right direction.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. you have any security program installed in the computer?

  2 what Microsoft FIXIT did you use exactly?

  I suggest you to install the drivers for the printer and check if it helps.

  You can also go through the steps in the article and check.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• Kodak esp7 all in one, error paper jam and will not print

  Original title - the printer printing

  Kodak esp7 all-in-one, says error paper jam but there is no habit of printing jam

  Hi Barry,.

  I suggest you to follow the instructions provided in the article below and check if it helps.

  I suggest you follow the instructions in the manual.

  http://resources.kodak.com/support/PDF/en/manuals/urg00976/ESP7_UG_GLB_en.PDF

  Note: See page 72. Also, follow the instructions provided in the article below.

  Crooked prints and paper jams

  http://support.en.kodak.com/app/answers/detail/A_ID/1737/kW/Kodak%20ESP%209%20and%20paper%20jam/selected/true

  See also section below.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab4&V3H=winvistatab1&v4h=winxptab1

  I also suggest you to contact Kodak support in this regard.

  http://support.en.kodak.com/app/home/selected/true

  Hope that this helps, if you have any additional questions, feel free to post. We will be happy to help you.

• HP Officejet Pro 8610: Problems for install HP Officejet Pro 8610 e-all-in-one printer on Windows 10

  We have a HP Officejet Pro 8610 e-all-in-one printer that is connected to the network.

  The printer is installed and can print successfully from 3 desktop with Windows OS 10.

  4 desktop pc with Windows 10 is not able to install the printer drivers.

  When addind printer with device to add the printer is recognized and installed, but only the driver scanner.

  We have tried to remove the printer some time but without success.

  Also, we tried using various HP and Assistant tools, but these tools can not install the printer driver.

  Adding the printer manual, also don't do not install us the printer driver.

  The only driver installed is the scanner.

  We are out of ideas, you can help us with all the great ideas.

  Sincerely,.

  Gilbert

  Hello

  I'm glad to hear that your problem is solved and everything works fine now.

  Good day!

• Problems with the touch screen of HP all-in-One after upgrading Windows

  I recently updated my version of Windows (64-bit) with system updates and then a full version updated to version 8.0 version 8.1.  After the update is complete, I started to experience a strange problem with the touch screen on my HP Envy Rove.  The screen would flash repeatedly one set of points in the right lower quadrant of the screen as if the simulation random screen button.  There is no way to stop this.  If the screen on a keyboard was pulled up, letters in the place of the flashes would be broadcast in the fields on the screen.

  The only way to stop the flashes of screen has been to go into the Device Manager and disable the HID-Compliant device driver.  It stopped (system generated keys) flashes, but also disabled my touch screen input.  So now the system is usable, but without the benefit of the touchscreen.

  Here is the information on the driver:

  HID-Compliant device

  Date: 21/06/2006

  Version: 6.2.9200.16851

  (input.inf)

  I tried updating the driver, but this seems to be the latest version available.  Go back to the previous version of the driver, could solve the problem, but I could not locate on the support web site.

  Any suggestions on how to solve this problem and re-enable the ability of my touch screen?

  Hello

  Downloaded drivers from the manufacturer will be the most tested and up to date available. The best place to download a driver is directly from the manufacturer of the equipment.

  So I suggest you to install the driver that is available on the HP website for your model.

  Troubleshooting of touch screen in Windows 8

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03488148

  Just reply with the results.

• HP Photosmart all-in-One Printer series - B010 with Mountain Lion (10.8.1) / Wireless printing

  I tried to find manuals how to connect my HP Photosmart all-in-One Printer series - B010 to the network in order to get wireless printing, I followed a few articles, but it seems that my problam is that I can't find a way to connect the printer to the wireless network and find wirleslly on the mac. I'm getting hard to do... someone knows how to get there? Thank you very much!

  HP Photosmart all-in-One Printer series - B010

  MacBook Pro / 10.8.1 (Mountain Lion)

  Router

  Hi yadin7,

  The Photosmart B010 model only offer USB connectivity and does not provide any wired or wireless network connectivity.

  You can find the specifications listed below:

  Input/output
  USB port: Rear hi-speed
  

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=120&prodSeriesId=4058814&prodTypeId=18972&ObjectID=c02120016

  Kind regards

  Shlomi

• Kodak ESP 5250 all-in-One Printer

  I HAVE TRIED to MANY TIMES to INSTALL this ALL-IN-ONE PRINTER WITH WINDOWS 7 64 BIT... IT IS NOT COMPATIBLE. MY OLD COMPUTER WHICH I HAVE RECENTLY GOT RID OF WAS COMPATIBLE WITH THIS PRINTER ALL IN ONE, IT IS WINDOWS XP.  I HAVE THE PRINTER INSTALLED ON MY WINDOWS XP LAPTOP.  HUMAN COMPUTER ALSO NOTIFIED MICROSOFT AND KODAK THAT A DRIVER MUST BE INSTALLED.

  You can chat with support technique kodak over here:

  http://www.kodak.com/global/en/service/chat/index.jhtml?PQ-locale=en_US

  down to the line that reads your esp 5250 model

• HP Deskjet 2540 all-in-one: printer stopped connecting to the wifi network

  Hi, my printer has suddenly stopped detecting my wireless network. When I turn on the printer, wireless blue light continues to blink and there is an exclamation point on the screen of the printer. I still have the same wifi network as before and have not changed it or its parameters. I have not physically moved the printer and the wireless works fine for all computers, iPads, and phones.

  I tried to uninstall and reinstall the HP Utility Set Up software but it couldn't detect the printer to set up.  I also tried running the diagnostic results, but all the results, said 'Not work', 'Not applicable' or 'None'. I can't even an IP address for my printer.

  My laptop can detect the printer if I turn on the wireless Direct button and I connect to this network on my laptop, but that's all. I'd rather connect the printer to the wifi so I can print from all my devices (phone, iPad etc.). The printer is less than 6 months and I do not understand what is the problem with him. Can you please specify?

  Hey @Sue1990,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I understand that the all-in-one printer Deskjet 2540 does not connect to your wireless network. I can help you with that.

  To connect the printer to your network again you will need to run the USB cable from the printer to your computer Mac OS x 10.7. This makes the open Applications, Hewlett-Packard and inside this folder you will find a program with a similar name to the installation wizard. If you run this program, then you will find options to connect your printer to your wireless network.

  Please let me know how it works for you and let me know if you have any questions.

  Have a wonderful evening!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• Must restart to establish a wireless connection on all-in-one printer, HP Photosmart C3180

  
  

  • Description of the problem - unable to connect to the printer, unless you restart printer
  • -Printer HP Photosmart C3180 all-in-One Printer model
  • (Including service pack revision) operating system - Mac OS X 10.6.2
  • -Wireless connection method
  • Error - could not connect. Photosmart C6100 series (C8897C) is currently unavailable. Please check is it is on and connected, or try again later.
  • Using the latest version of the drivers for HP 2.3 Apple updates and the latest version of the bundled software HP 4.4.3 utilities.

  I was able to solve the problem by reading the comments of others and came across the solution.

  By turning on the printer press and hold keys # and 3 which resets the printer as a warm reboot. Hold the keys down until the main menu appears on the screen (it took awhile so be patient).

  Return to the Mac and remove and re-add the printer via system preferences > printer and faxes (-/ +). However, there is no need to restart the printer twice until it was added back successfully.

• HP ENVY 5530 e-all-in-one: printer is not to connect to the Internet wireless

  Hello

  English is my second laungage. hope you understand...

  I can print with printer through windows and Mac PC cable. but, I can not connect between rutour and the wireless printer.

  I used the Setup Wizard and found the SSID name. I typed PW. but "Not connected" is displayed.

  I print the Configuration Page from HP network.

  Live wireless

  Status on

  What else can be done using wireless printer.

  Kind regards

  MI-Ko

  Hello

  If you try to connect your printer to the router, you should make sure that wireless Direct is trurned to offshore. Direct wireless is a feature that allows you to connect a device directly to your printer without router (the printer generates its own wifi)

  Please turn off direct wireless (it's often a button on the front panel) and try to connect again.

  I have included a link below for you rprinter support page that contains the user guides that should help also.

  http://support.HP.com/us-en/product/HP-envy-5530-e-all-in-one-printer-series/5304881/model/5304882

• Canon PIXMA MG5220 Photo-All - in - One Printer - my printer print when connected to the computer, but not when it is wireless

  Window indicates that my new printer Canon PIXMA MG5220 Photo All in One Printer is compatible with my Dell Inspiron E1705, my printer prints so that connected to the computer but when I try to print wireless, it does not work. The printer is wireless and I have a wireless cable modem, what am I I lack to the printer wireless?  Please advise.

  Hi LouiseFarmer,

  It seems there is a problem in the basic WIFI the printer setting.

  I suggest you show the manufacturer's Web site to learn more about the drivers and the printer setting to print via WIFI.

  http://USA.Canon.com/Cusa/consumer/products/printers_multifunction/photo_all_in_one_inkjet_printers/pixma_mg5220#MiscWirelessHelp

• HP wireless all in one printer C410 can get a connection

  I have a HP C410 e-All-In-One printer/fax/copier that is wireless. It was working fine with my computer until someone changed my internet security settings, and now I can't connect. How can I re - adjust the internet printer or the computer setting so that it is compatible again? My printer just wirelss button continues to Flash, as it cannot connect. When I go in the menu on the printer Wireless Setup, I can say that the printer sees my internet, it cannot simply connect. Help, please!

  The easiest way is to uninstall, and then reinstall the printer. If this does not work, then you should ask experts network for advice: social.answers.microsoft.com/Forums/en-US/w7network /son

• HP Officejet 6210xi all-in-one: a HP Officejet 6210xi all-in-one printer can be connected wireless?

  does anyone know if the hp 6210 xi all-in-one can be converted into a wireless printer as well as a wifi network can access and mobile devices?

  Hello

  The HP Officejet 6210xi is one USB printer, it does not offer nay network connectivitu and along such a is not supported.

  You can find the printer specifications below, as listed in section system requirements only a USB port is available for the printer:

  http://support.HP.com/us-en/product/HP-OfficeJet-6200-all-in-one-printer-series/391210/model/391212/document/c00228331#AbT0

  Shlomi

• Printing DCP color red problem - HP Officejet Pro 8500 Wireless All - in - One Printer, the 4th copy

  I have a HP HP Officejet Pro 8500 Wireless all-in-One Printer and try to print 75 copies of a program for our event. After the first 5-6 pages the RED in my program starts to turn magenta. I have new HP ink cartridges and print on HP Color Injet paper. I have renectly replaced the Black/Yellow Printhead (at least 6 months ago). At the beginning when I cleaned the printheads, I was able to print 2 or 3 pages showing my color RED. Then back to magenta. When I received the images of test after you have cleaned the print heads, they are all perfect, no lines.

  What happens and how can I solve this problem?

  Hi TM1997,

  Thanks for the reply!

  Given that the printer seems to work for a bit and then comes back to the same question, it must be a problem with the printhead (Cyan/Magenta one) or the ink lines that go from the cartridges to print heads. First of all, I would suggest that you check the warranty date on your printhead C/M. If it is under warranty contact HP Technical Support in your area and inquire about a replacement, but if not, it's you if you want to replace the print head, printer service, or look into an upgrade.

  Have a great weekend!

• 4280 all-in-one printer connection problems

  I can't hang a F4280 all-in-one printer at a Pavilion a1223w PC.  I always get a command prompt which does not recognize the USB connection.  Can anyone help?  Thank you!

  No luck with that - I tried all USB ports and under tension on the cable, but still no connection.  The prompt says "Windows does not recognize USB" any other ideas?

  Thank you!