wireless network security key will not save for the next time I connect

I changed my moden safety key and then changed the security key on my computer, but it will not be saved. I have to manually change the new key eact time I bring to the top of the Explorer. I have windows 7


Hi RGSprings,

I suggest you follow the steps and check mentioned below.

a. right click on the wireless network in the system tray icon.

b.Select network and sharing Center

(c) in the left pane, select change adapter settings.

d.right-click on the wireless network connection icon.

Propertiesof e.Select.

f. disable authentication IEEE.

You can also see the following article for more information:

Set up a security key for a wireless network



What are the different wireless network security methods?


Let us know if that helps.

Tags: Windows

Similar Questions

  • Wireless network security key: how to hide?

    Windows 7 does not hide the routers wireless network security key. Please check the properties of a wireless adapter connected to a laptop running Windows 7 and see you the network key. This is not the case in Windows Vista and XP.

    To hide the wireless security key network, uncheck the box in the properties of the wireless network connection that says show the characters . Boulder computer Maven
    Most Microsoft Valuable Professional

  • Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another progr

    Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another program.

    Hi rkusa1,

    Thank you for using Microsoft Windows forum

    QuickBooks worked very well under Vista? It should also work reliably on Windows 7.

    However, you may want to follow these steps.

    1. right click on your quickbooks start exe file and open properties.

    2. on the Compatibility tab, select the compatibility mode and run this program in compatibility mode for Windows using the following link: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows (only if she worked very well with former Windows operating system)

    3. the control privilege level "Run this program as Administrator". Press apply/OK to close properties.

    4. start - devices and printers - add a printer - add a local printer - create a new port - local port and name it QBD_PDF.

    5. Choose install AMYUNI Technologies - Amyuni Document Converter 300 (click the button update windows if it is not on your list).

    6. If windows detects you already have a driver and then choose to replace the current driver. The printer name Quickbooks PDF Converter - do not share the printer - NOT set as the default printer. Finishing

    7. start right click - devices and printers - printer QB, choose printer - properties and go to the Advanced tab.

    8. remove the checkmarks in the 4 elements with square next to them (lower part of the screen) boxes, and then select "Print directly to the printer" press OK to close the window.

    9 restart you computer and open Quickbooks. Open the file - printer installation and make sure of Quickbooks PDF Converter is selected for any operation PDF printer that you use frequently. (on rare occasions, you will see not of Quickbooks PDF Converter on the list, reboot again and you'll get it).

    You can now perform operations of PDF in Quickbooks (works for 32 and 64-bit Windows 7)

    For a similar question, see: http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/2bd30024-0a64-4f6b-a831-8cb7c1e4cce5

    If the steps above do not post your question in this link: http://community.intuit.com/quickbooks

    Kind regards
    Aziz Nadeem - Microsoft Support

  • Want Firefox to save your tabs for the next time it starts?

    FF 27.0.1 on Linux Mint XFCE 16, up to date.

    I have my preferences set to "show my home page".

    Whenever I close FF with the X in the upper left corner, he gets up and asks me "do you want Firefox to save your tabs for the next time it starts? I check the box to ask next time and have tried both save and exit and just left. When I open the browser again, it seems to randomly decide to open all the tabs I had last time, or sometimes (rarely) just my home page tabs.

    I don't want to open all the tabs I had open, and I don't want the question whenever I have leave FF. I used FF for years with XP, but I am new to Mint.

    Done setting the prefs 'warnon' on the topic: config false page has an effect any?

    • browser.tabs.warnOnClose
    • browser.tabs.warnOnCloseOtherTabs
    • browser.warnOnQuit

    Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Command + SHIFT + F).

    If you are in full screen view then hover over with the mouse to the top of the screen to facilitate the bar appear Navigation and tab bar.
    Click the expand (in the top right Navigation bar) to exit full screen or right-click on a space empty on a toolbar and select "exit full screen" or press the F11 key.

  • Icons wiggle and move in the home screen but will not go to the next page

    Icons wiggle and move in the home screen but will not go to the next page

    You need to move to the edge and hold the button for a few seconds so he can move to another screen.

  • How can I save my tabs for the next time I open the browser?

    In the previous edition (3.6.12) if I want to close my pc, I had the ability to save my tabs for the next time... I can't find this option in this version.

    Firefox 4.0 automatically saves your session when you close Firefox. Next time you open Firefox, click on the link of the Previous Session restoration on the default on: Home home page or in the menu of the Session previous restore point in the history of menu drop-down.

  • I have 6 music phone will not advance to the next continues to repeat song

    If you use bluetooth car, song keeps repeating and will not advance to the next song.

    I have the same problem, but I use a USB cable to the radio.

    Everything worked fine until I upgraded to the latest IOS 9.2. Everything works fine on the computer, but on the phone that you only get to play a song.  If you keep hitting the shuffle icon it changes songs but it's a pain.

    Come on Apple just your updates are not good enough.  How about testing before releasing upgrades.

  • How can I change password to get into my computer? I am now in my computer, but want to change for the next time I open it.

    How can I change password to get into my computer?  I am now in my computer, but want to change for the next time I open it.  Thank you.

    Click Start, click your account at the top right picture, click on 'change your password '. You must then enter the old password and a new.

  • Security code will not save to update the paymnet options

    Security code wil not save by updating payment options

    Update billing information will be through your itunes on the computer account or IOS device. If this does not work, then you can contact iTunes

  • My KEY will not work for both windows 7 32-bit update and 64-bit version?

    I have two, a copy and a key for the upgrade to Windows 7, 32-bit and 64-bit.  (Key separately for each version, purchased about 6 months apart.)

    The computer that is running the 32-bit version had a hard drive failure.   After replacing the hard drive, I decided to install 64-bit on this computer using the key provided with the 32-bit version.

    I was led to believe that the key is not related to the 64 or 32 bit version and that it could be used for both, but only installed at the moment.

    After getting to step to enter the key, using the key provided with the 32-bit version, he couldn't say invalid key.  After several attempts and checking of typo, it's a no go.

    So, I went and started around and installed the 32 bit version and the key worked fine.

    So the key provided with the 32-bit version of 'upgrade' tied to only this version?  Every search I do, says that you can use the key for 32 or 64 bit.  They never mention the version "upgrade" is different from the "full" version

    Thanks for any info,


    Because it is an upgrade version.

    However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

    15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

    So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

    So using phone activation is the work around:

    How to activate Windows 7 manually (activate by phone)
    1) click Start and in the search for box type: slui.exe 4
    (2) press the ENTER"" key.
    (3) select your "country" in the list.
    (4) choose the option "activate phone".
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
    (6) explain your problem clearly to the support person.

  • My names of files in Flash CS6 change every time I have save for the first time

    When I got Flash CS6, I worked on an animation and has called "grumpy." Now, 2 years later, whenever I'm doing a project in Flash and save it for the first time, he adds "": grumpy ' at the end of the file name. "

    For example, I'm working on a project now with the point leader name "2_1.fla segment." When I recorded it for the first time, it changed to "segment 2_1.fla*: grump.»  Adds it at the end of any project, regardless of the type (ActionScript 3.0 or 2.0).

    I have no idea why Flash is doing this, because this project is not connected to the original 'grumpy' somehow. I don't know how to remove it, either. Any help would be appreciated! Thank you!!

    reset your preferences - flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

    you could also disable AutoSave to see if that solved the problem.

  • PR Pro CC 2014 not start (for the first time)

    First CC 2014 wil not start on my iMac. (for the first time)

    It shows:

    "Adobe Premiere Pro coult not find capable video game modules. Please update your video display drivers and commissioning.

    My iMac:

    10.9.5 O.S.

    3.5 GHz i7

    32 GB 1600 MHz DDR3


    NVIDIA Geforce GTX 780 m 4096 MB

    I have foud a CUDA driver:

    version 6.5.18

    What should do?


    Please introduce this place on your computer:

    Click go on the top go to ~/library folder-Type and then go to the application folder - rename the old adobe adobe folder

    return to ~/library then go to preferences and rename the old adobe adobe folder

    Access documents and rename the old adobe adobe folder.

    After doing this, you will be untied your sync settings and custom keyboard shortcuts and the effects, if any.

    Thank you


  • CD or DVD not detected for the first time, always detected on insert it again.

    Whenever I insert a CD or a DVD into my DVD drive, the drive is not detected. No contents of the drive is displayed in Windows Explorer. I see the drive to read the disc, as indicated by the green light flashing, but nothing happens. This problem is always solved by reinserting the disc. I don't know why I have to insert each disk twice each time so to be read and any help would be greatly appreciated. When I insert the DVD for the first time, its content is not considered in the Windows Explorer, however, he begins to play when I open my DVD playback software and click on the play button. I have Windows XP Professional SP3.


    1. don't you make changes to the computer until the problem occurred?

    I suggest you to try the steps below and check if it helps.

    Method 1: Your CD or DVD drive cannot read or write media


    Method 2:
    The article below describes how to troubleshoot common problems that may occur when a Windows XP-based computer cannot read a CD or a DVD in a CD or DVD drive. This article contains several methods that you can use to try to solve these problems, and it also includes some advanced troubleshooting steps.
    How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD:

    See also:
    How to manage devices in Windows XP

    Hope this information is useful.

  • My computer crashed when I was in Lightroom 5.7 and I can't on it comes back with a message will attempt to fix the next time it runs, but how it can with this message is blocking it.

    My computer crashed when I was in Lightroom 5.7 and now a message appears it will try to fix it the next time it starts but how it will launch when this message is blocking.

    Go to the same folder as your catalog file, find a subfolder whose name ends with Previews.LRDATA. Delete the subfolder Previews.LRDATA. Do not remove anything else.

  • Updates the window appear when shutting down, but do not set up the next time you start

    The display shows 15 updates of Windows are loaded (installed?) when the machine is stopped.  To restart Windows, the screen indicates "wait" while the updates are being configured.  The icon indicates that the configuration is current, but the screen always said that "0% are completed.  Then, after a few minutes, the screen indicates something as "installation failed; Revenant.  After the message 'return', the machine moves to the usual Windows 7 start page and asking to connect you as usual (which allows me to work on the machine).   So, the next time I shut down Windows, the screen indicates that the installation of several updates continues and is completed in series.  Then, the next time I turn on the machine it asks to wait while updates are configured;  and finally, it "fails to complete the configuration" and "resets" as described above.  What happened several times in the last two days.  What should I do to get this resolved failure?

    Hi BonnieDoon,

    1. did you of recent changes on the computer?

    2. you receive error message during the update by installing the process?

    Method 1

    See the Microsoft article below as well as try the steps mentioned and check if it works.

    The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7


    Method 2

    Restart the computer after you follow the steps above and check if the problem persists, if the problem persists then checks the update is not being properly installed on the computer and then install it manually.

    View update history to know which update is not installing.

    (a) open Windows Update by clicking Start , all programsand then click Windows Update.

    (b) in the left pane, click view update history.

    (c) to view more information about an update, double-click it.

    Once you know the update's KB number then visit the Microsoft Download and put the number in the search box, download and install the update manually.


    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for