wireless network with windows vista problems

Similar Questions

• Original title: the connection card wireless network with windows 7 problem

  I have a dv6 Notebook PC HP clubhouse, 64-bit Windows 7 Home Premium, I bought end July2010. H-he detects the wireless network but will not connect. just if I'm until modem.but colse it smt connect to the deffernt wireless network. What is happening and where do I go to fix this problem.

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message when you try to connect to the wireless network connection?

  Method 1:

  First of all, I suggest for the link and try to run the troubleshooter and check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  I suggest you to refer to the article and see if it helps:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Let us know if you need more assistance.

• I can't connect to wireless internet with windows vista

  I bought a new HP Pavilion dv6 laptop with Windows Vista and I tried to connect to the internet from my laptop via router ADSL2 + wireless D-link but my network is not visible wireless.

  I tried to plug my ether cable and this time my network was visible, but it would not connect.

  I am able to connect from another laptop with windows XP wireless through the same router.

  My HP laptop connects via WiFi in other places, but not at home via D-link router.

  I am not able to connect to internet from my laptop HP since I bought it 9 months ago.

  
  

  What can possibly be the reason? Can you help me connect to the internet?

  Thank you

  It seems that your settings are not correct for the access provider or router (or both).  I suggest that you contact your ISP and have them walk you step by step in the process of installation and configuration and do not let them off the coast of the Nigerian line you have a good connection, as you wish.  They know that the parameters so that we don't have, so they can help you better than we can, and I'm sure they will be happy to do.

  Here is an article (with many additional useful links) on how to set up a home network in Vista:http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.

  Here is an article on how configure and connect to a Vista wireless network: http://www.watchingthenet.com/windows-vista-tip-how-to-setup-and-connect-to-a-wireless-network.html.

  Here is a Microsoft Technet article on how to install and connect to a Vista wireless network:http://technet.microsoft.com/en-us/library/bb878035.aspx.

  Between these three articles and assisancce by your ISP, you should be running without delay.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Performance on a Satellite Pro A120-185 with Windows Vista problems

  Can someone help me with this.
  My laptop is a new Satellite Pro A120-185 with Windows Vista.

  I had my last configuration less portable, but you know what? He was faster!

  I'm supposed to have cetrino duo 2, 2 GHz and cach of 4 MB, FSB 667 MHz, RAM 1 GB, even though they are at 533 MHz, 100 GB 5400 RPM HARD drive / MIN.

  It is slow, not only starting, programs opening, plays something, the browser and even to copy from the CD to the hard drive sometimes give me time 4 days left!

  Clicking on something takes forever. What's wrong?
  Need less to say that with vista no and I mean none, of my devices are busy. Dongle Bluetooth, USB disk, printer, NAS, and and...

  Hey dude,

  Please don t forget that Vista has been installed on your laptop and the additional tools of Toshiba and the utilities that control many additional features!
  There is a huge difference between Vista and early Microsoft operating systems.

  The Vista eat computer resources and many devices old don t work or cannot be installed because the 3rd device manufacturers don t provide Vista drivers!

  In my opinion an upgrade to 2 GB ram would increases the performance of laptop.
  All programs and utilities could be loaded more quickly

• Drops of wireless network connection - windows Vista Restart problem

  Hello

  Recently installed Windows Vista on a new version of a recovered old PC as well as a few new purchases (memory, DVD player, NAS). Everything in place and works very well, but I'm faced with a problem of wireless network. The system works well: internet etc, but will drop the connection to the router wireless without apparent reason, he is followed by repeated reconnection automatic attempts when he will restore a decent connection for a minute or so and then drop again. This continues ad nauseam. The bulk of what a Windows restart will completely solve the problem for an hour or two until it is started.

  The research of the forums etc, I tried so far:
  -Switching of wireless channels
  -Deletion of "turbo" on the router
  -Disable IPv6
  -Checked drivers are updated
  -Check the firmware of the router

  I'm also reasonably sure of the following:
  -There is no interference (I put 'new' PC exactly in the same place as my old and uses exactly the same network card and router)
  -The work of the (PCI) wireless card (available connections always show the router as well as others in the region when connecting).
  -The router does not appear these problems with my PS3

  My details:
  -Windows Vista Home Premim - fully updated
  -Windows Firewall is the only firewall running
  Belkin router - G and complementary wireless card (a good old now a few years but run perfectly in XP)
  -P4HT 3 GHz, 2 GB system
  -Very little software installed to date (software the only thing I can think of Buffalo NAS relevent)

  Anyone with a similar experience? It's driving me crazy!

  See you soon!

  Hello DizzyEgg,

  Thank you for posting.  Transitional issues are most frustrating to resolve.  I think that this problem is with your wireless card.  If your PS3 and other devices are not the problems to give up the connection to your router this supports the hypothesis that the problem is in your wireless NIC.  We have seen that many times on this forum and I personally had the same problem with a wireless card.  The symptoms are identical, will connect for awhile, and then abandons the connection while still showing a strong wireless signal.  You can reconnect manually for a few minutes, and then the connection drops again.  Restart Windows seems to fix the problem than to have the connection after a variable duration.  Unfortunately, the only step in troubleshooting to verify this is to replace the wireless NIC card to test if the connection will be held with the new card.  Since you admit that the map is several years old that increases the likelihood of this being a transient failure on the NETWORK card wireless itself.

  Thank you

  Jack

  Jack
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect to a wireless network with Windows 7 computer laptop.

  After resetting my router netgear wireless home network, I have not been able to access my own network with my laptop. I already had access to the internet with a wireless ethernet cable and ankles bound to the router. After reset the netgear router, I was able to access the internet from two other laptops XP and an Acer mini wireless with no problems at all. But my new laptop Toshiba with Windows 7 could not connect, even if he could detect the network. I tried all day even resort to the ethernet socket and wireless cable, but even that would no longer work. I was able to connect using this same cable attached.

  Hello

  Seems that the Wireless does not work on the Dell.

  This is the process to try to find what wrong with it.

  ------------------

  Assuming that wireless router is configured correctly, it is a signal and the wireless card on the computer is physically in.

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  To ensure that if there is Wireless Utility a seller is not running with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd AV/Firewall/security software part, s costume keep blocking aspects of Local traffic even it they are off (disabled).

  If possible set up the firewall correctly, /Security costume otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Zune with Windows Vista problem

  Using Windows Vista with all latest updates. Installed Zune to work with my Windows Phone 7. I get error messages that "Zune wireless drivers do not properly install" at the bottom right of my screen. I get these messages when I don't use a Zune. Any suggestions? I've not unhooked Zune and still get the error message.

  Hello

  Step 1: How to troubleshoot wireless synchronization between the Zune software and Zune device
  http://support.Microsoft.com/kb/952304

  Step 2: I suggest you perform a disk cleanup

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

• My Atheros AR5007 802. 11b / g wireless networking with Windows 7 does not work (works with Vista) and had two HP & Microsoft support tech, they could physically turns on (Soft Touch button) by driver, can you please help?

  He used to work under Vista, not working (not able to turn it on) wireless adapater. But when Win7 starts upward, it turns on and turns off immediately.

  Hello
  First of all, make sure you use the latest version of QLB. If not, install from below:
  Buttons lunch fast HP here (ver. 6.50.7.1)

  One important thing to keep in mind. Before update no matter what driver, make sure that your first uninstalled old version.

  Try installing this driver and check it works:
  
  Atheros Wirelesss driver for Win7 from HP here (ver. 8.0.0.172)

  When this driver does not solve your problem, try an exits:

  Atheros Wireless here (ver. 8.0.0.225)

  If even this will not work so tell me one thing. You have all colorors of stgrange the button mute or wireless.

  If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

  If your issue is resolved, please indicate then your wire is with solution.

• CD/dvd hardware with windows vista problem

  I have a code 10 when I search for a solution to my problem.  I tried the solution in the Ant, and that's what came.  After clicking the regetit in programs, then the only option that appears next to what you say, it's this 'HKEY_LOCAL_MACHINE' when I click it it says under the name it says

  (Default) AB under Type, it says "Reg_SZ under data, it is said (value not set) so I don't know what that means and I can't continue with your instructions please help.

  My propbem is that when I put in a cd or dvd, nothing happens and when I click on get a solution, I get code 10

  My DRIVER of CD-ROM/DVD-ROM IS DVDRW 20X20X12X ATA Device Version 6.0.6002 18005

  Hi Shea58,

  You will need to access this site and you should be able to see. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  You can click on the + next to hkey_local_machine and expand it and you should be able to see the System, click on the + next to the System and expand it. Similarly, to access the location specified.

  It is a Microsoft Fixit who can take care of this automatically. Open the link below and click it on the Fixit button.
  http://support.Microsoft.com/kb/929461

  If the Fixit does not help then, try the step manually.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  I hope this helps.

  Bindu S -Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Networking with Windows Vista Premium 64

  I use 2 machines on my home network.  A desktop HTPC computer and office.  Both wired.  I have problems of sharing.  I log on to both computers and that you can see them both on the network.  I chose to use a password to view the files.  When on the HTPC I select desktop and am asked to connect.  I have connect and am able to navigate the file system.  But when I'm on the desktop computer, I can see the HTPC, but can not connect upon request.  I get a password for verification or logon ID.

  I played a little bit and added another user.  So now, if logged on as A user, I can use the user B to access the HTPC for the desktop computer, but only one user file is not accessible, this file is selected as shared.

  I checked and rechecked as the same, but can not get to work.

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  Have a read of the link above re Vista file and printer sharing.

  Permissions/Share info is there as well.

  If you use Norton, McAfee, Trend Micro or Kaspersky I.S., make that file and printer sharing is enabled in THE Firewall (or LAN enabled, depending on how their Exceptions are formulated in their firewall)

  1st thing to do is to make sure that the name of working group on ALL computers is the SAME.

  http://www.Vistax64.com/tutorials/125089-workgroup-name-change.html

  Above tutorial is how to change the workgroup name in Vista

  See you soon.

  Mick Murphy - Microsoft partner

• LaserJet P1102w: Laserjet P1102w cannot activate the installation with Windows Vista 32 bit PC computer wireless

  Hello forum HP, I can use the Laserjet P1102w with USB connection on 3 different devices including a portable Apple and PC Windows Vista and Windows 7 laptop computer, but can not perform a wireless installation with the broadband internet connected wireless PC running Windows Vista 32 bit. The main message is that the computer does not find the printer even when using the USB connection. Any help would be appreciated.

  Hi @Kaiser3107,

  Welcome to the HP Support forum.

  I understand that you have a HP LaserJet Pro P1102w printer that connects three thin devices via the USB port, but you can not perform a wireless installation on a fourth device, equipped of Windows Vista 32-bit, because the PC does not detect the printer via the USB port. I would like to help with that.

  Here is a support document which includes 'USB device is not detected by Windows' which can help the issue of detection - Troubleshooting (Windows Vista) USB connections.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Problems with Atheros 5007 802. 11 b / g with Windows Vista

  I have a laptop with Windows Vista sp2, and I try to connect a Cisco, Lynksis router E2000 wireless.  It does not work and I had a chat session with someone from Cisco, and he says it's my Atheros 5007 802. 11 b / g WiFi adapt which is causing the problem, and I need to upgrade. Where this to do and how. I've looked everywhere and can't seem to understand.  When I go to my driver Atheros and doing an "update", it tells me that it is currently being updated.  As you can tell I'm not super savvy, computer so any any help will be appreciated.

  My recommendation is not to uninstall the driver first and then reinstall unit manufacrturer Web site.

• Two computers with Windows Vista has problems with (screens going blank).

  We have a Sony Vaio laptop and an HP Touchsmart with Windows Vista.  Last week Sony screen turned black and jumped, then back with the message saying there was an error with the NVIDIA GRAPHICS DRIVER, the driver had stopped working properly.  You had to do repair system, which then gave me an option to do system restore to the previous time.  Done this and back Sony a bit, then the screen went black and had to repeat the process.  Long story short, it won't restore or do something.  HP Touchsmart now do the same thing.  Anyone having this problem?

  If you have the message on which you say that you did - it's a driver problem or a video card problem.  If you allowed Microsoft to update your nVidia driver - that might be the root of your problem.  It is possible that both machines have nVidia video cards, maybe even the same.  In any case - the solution remains the same for at least the one you quoted the error for.

  Download and install the latest video card for any device driver is installed and if this does not work - could be material.

  I'm guessing that the machines are in the same place - same meaning House or business?  If they are connected to a regulation of output/device which could damage the components via automatic voltage of the voltage drops and overvoltages?

• I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  Hi Izzy Nagar,

  ·         Exactly when you receive this error message?

  ·         Did you do changes on the computer before the show?

  ·         Do you have any extended monitor connected to the computer in the past or at the present time?

  Follow the suggestions below for a possible solution:

  Method 1: You can try to reduce the resolution of the screen (lower), then check if the message still appears.

  Check also if the refresh rate of the monitor is set correctly and check the manual of the monitor for assistance.

  Ways to improve display quality

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-display-quality

   

  Flicker of the correct monitor (refresh rate)

  http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

  Method 2: Use the option ' enable video low resolution (640 × 480) "start, then update your video card driver and check if the problem still persists.

  a. click the Start button, click the arrow next to Shut Down and then click on restart.

  b. do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  c. on the Advanced Boot Options screen, use the arrow keys to select activate video low resolution (640 × 480) and press ENTER.

  d. connect to your computer with an account of a user who has administrator rights.

  e. If you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information, see the article:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  I hope this helps.

• Problems with Windows VISTA update (error code: 9 c 47 of the 800070002, D 80024200)

  original title: problems with Windows VISTA update

  I'm using Windows Vista (SP2). Windows update is not able to update the following updates on my system. Whenever I get these error messages.

  1. 9 47 code
  2. Code 800070002
  3. Code D 80024200.

  Is there a resolution to do the same thing?

  Hello

  Did you change your computer?

  I suggest you to follow the methods and check.

  Method 1:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 3:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.