Wireless on my guard down computer

My wireless on my computer continues to drop, it shows that its still connected but cannot open google. I disconnect then and reconnet and it works for awhile but then it drops again. Can you please indicate

[Moved from comments]

Hi maquart,.

For you help I would be grateful if you could answer the following questions:

(1) what operating system is installed on the computer?

(2) you get an error message / code?

(3) what is the brand and model of the computer?

Follow the troubleshooting methods and check if it helps.

Method 1:

This article that you can identify and solve problems with a wired (Ethernet) and wireless (Wi - Fi) network connections in Windows.

Wireless and wired network problems

http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

Method 2: Refer to the link below and check;

10 tips to help improve your wireless network

If the Windows operating system never tells you a weak WiFi signal, this probably means that your connection is not as fast or as reliable as it could be. Worse, you may lose your connection completely in some parts of your home. If you want to boost the signal of your wireless network (WLAN), try some of these tips to extend your wireless range and improve your wireless network and performance speed.

http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=pbFpBDrZ-Hu

Method 3:

Temporarily disable the antivirus/firewall software and run the applications.

Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

If you need help with Windows, please do not hesitate to post. We will be happy to help you.

Tags: Windows

Similar Questions

  • printer wireless 3050 j611 guard lose connection

    My printer wireless-3050 j611 guard a lose connection. Sometimes the Internet work to a crawl when this happens. I have run all kinds of utilities, virus checkers, re - install printer DCP. When he gets back online, the Internet seems to run at full speed. It's embarrassing. I am connected via ATT Uverse.

    Hello hollywodBDA

    I work on the assumption that you are running Windows 7 that you have not specified a operating system that you are running. I will give you is a called HP support document: troubleshooting your wireless network and Internet access (Windows 7). If you are not running Windows 7 just Google search "Troubleshooting your wireless network connection" and Internet and pick the one with your operating system. Now, this document should help you identify what is happening on this is the cause of your network to go down. It is not a coincidence that you lose the connection to your printer when your network goes down that it communicates on the network. Think of it as a phone line, you talk to someone to say New York, and the telephone system breaks down. It is not a problem with the person you're talking to New York, but the network which has cut off the communication.

    Now, this does not mean that a printer can't get a network, it is just unlikely. I would consider the most obvious causes such as computers on the network and even the router itself.

    If you want to identify which device is take them down to remove network devices one at a time until the problem stops and/or Exchange on to see which is causing the problem.

    I hope that this will lead you to the solution on what take down your network. Thanks for posting this topic on the Forums of HP feel free to re-post if you still need help. Have a nice day

  • This guard freezing computer and telling me sqmapi.dll is missing. Can I have some suggestions please

    original title: sqmapi.dll

    This guard freezing computer and telling me sqmapi.dll is missing. Can I have some suggestions please

    Run the System File Checker tool and I hope that it will solve the dll. Learn How to use the System File Checker tool

  • wireless printer won't networked computer photo-quality paper. Due to office, but no cell phone

    original title: wireless printer won't networked computer photo-quality paper. Due to office, but no cell phone

    I have a wireless HP printer. Desktop and lap top are connected to the printer. Desktop will switch printer on photo-quality paper when asked but laptop will not pass. Tried to change prefereces and still does not work. In the contrary case, it prints fine laptop.

    Hello

    Install the latest printer drivers in the notebook, and the check.

    http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

    Also try the troubleshooting of network running.

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    It will be useful.

  • wireless adapter keeps blocking down is my grilled adapter windows guard resetting, but it always stops

    My keepps wireless adapter window line to hit me back it but after a few minutes I connection loose again what is happening

    Hello

    ·         What operating system is installed on your computer?

    ·         You did changes to the computer before the show?

    Method 1:

    I suggest that you put the computer to boot and check for the issue:

    http://support.Microsoft.com/kb/929135

    Note: Place the computer back to normal when you have completed troubleshooting by following step 7 from the link above.

    Method 2:

    I also suggest you to remove the security of the wireless network and check for the issue:

    http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

    Note: Make sure to put the protection of the security on the wireless network when you are finished troubleshooting.

    See also: http://windows.microsoft.com/en-US/windows-vista/What-are-the-different-wireless-network-security-methods

  • Shut Down computer problems with blackscreen on startup

    Original title: computer off

    I am running Windows 7 64 bit.  I was burning a movie I downloaded to the web and all of a sudden my computer off. I pushed the power button and all I got was a black screen.  My monitor was still in sleep mode.  I tried to turn off the computer by pressing the power button.  But he would not shut down. So I unplugged the power chord.  I thought maybe it was my wireless keyboard.  He was weak in power.  So I have it at full load.  But when I pressed the power button, I still have a blank screen.

    I discovered what the problem was. The supply wires to the generator which connects to the cpu has been burned and torn.  Electricity went through the computer.  So I had to buy another one, install and connect everything.  Everything works fine now.  I'm back on my own computer.

  • Router wireless Presario SR5610F hangs the computer

    My wireless router has failed and I got a new. My office (Presario SR5610F, Vista Home) crashes whenever I try to connect to the wireless network. (This happened at least two different routers, then the problem must lie in the computer and not the router).

    This is the screen I get when the accident occurred:

    http://danhughes.NET/Misc/screen.jpg

    Then I tells me that I can reset the computer to an earlier time. I do, and then I get this screen:

    http://danhughes.NET/Misc/crash.htm

    (I had to take three images to scroll through the entire message).

    Thoughts?

    Thank you!

    -Dan

    Well, the problem was the Linksys USB Network Adapter (the "receiver" for the wireless signal).  I replaced it with a similar Belkin adapter and now everything is fine.

  • Updates from HP agent... always began in the early and slows down computer

    HP Pavilion a1222n, Win XP Home

    When we move first on the computer, it is slowed down by "updates HP agent running' controlled by the Task Manager.

    I would like to disable the execution the present automatic and run it when I want to run the updates from HP.  I read in another post to go to start > all programs > setting > select never allowing you to a chosen when run the HP update agent.  I can't seem to find it on this machine, the message I read was for another model.

    Thank you

    Ron3033

    Hi Ron,

    Try the following.

    Hold down the Windows key and press R.  In the run box, type msconfig and press to enter.  In the System Configuration window, select the Startup tab and Remove the check mark next to the HP update agent.  Click apply and then click Ok to save the changes and restart the PC for this change to take effect.

    Kind regards

    DP - K

  • HP ENVY notebook - d000-13D-CT: new computer. Wireless connectivity works however, this computer cannot connect to the internet.

    I have a HP ENVY laptop new - 13D-d000 CTO (ENERGY STAR).

    Product name N8R87AV

    Windows Pro 10

    64 bit

    Network adapter: Intel Dual Band Wireless-AC 7265

    When I click on the wireless icon - it shows me the connection within the home. I connect and it says it is the network configuration required, but then it crashes. I try again later and it does not find the connection at all.  Other devices in the House are connected, so I know that the real wireless works.

    I called HP Tech Support, they tell me it's a matter of Internet provider, I call AT & T and they say it's a problem of HP. I call HP Technical Support and they always say it is a problem of ATT and I have to tell them to configure the settings. I call ATT and they cannot diagnose and insist that it is a problem of HP.  I'm not at a loss.

    I hope to find a solution, it seems that networking with HP wireless seems to be ongoing question. Thanks in advance for your help.

    @losaltoscasa

    Consult and follow the suggestions in the Document troubleshooting:

    HP PC - Troubleshooting wireless network and Internet (Windows 10)

    Comment

    It is possible, depending on when your new computer was actually produced and implemented for Windows 10, that the Intel Wireless LAN Driver should be updated - or at least reinstalled.

    Drivers (Windows 10) HP ENVY laptop - 13D-d000 CTO (ENERGY STAR):

    sp71972.exe

    =====================================================================

    Update the BIOS

    Also listed in the section of the conductors: update of the BIOS.  Note that the BIOS updates are an inherent risk; It is strongly recommended that only update you your BIOS when necessary (ie., to correct a problem) and only after that you have completely backed up system - which includes all critical files be available either on the cloud or backed up to an external drive where you can access it.

    sp72643.exe

    Version: Rev.A e.16

    Windows key + R (open the Run command) > type msinfo32

    Opens the Information System

    Under System summary > to the right of the Version of the BIOS/Date search

    --------------------------------------------------------------------------------

    A bit dated; always topical:

    Updated the BIOS

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' on this post.

    My answer-click accept as Solution to help others find answers.

  • HP 6510 printer wireless not recognized by the computer

    Original title: HP 6510 wireless printer not recognized by the computer.  Works well before today.  Printer says ity online

    Our HP computer does not find the printer wireless above.  We made the updated IP address, which is correct, have restarted the router, the computer and the printer.  Convenience store is unable to detect a problem

    Hi Karen,.

    -What version of Windows is installed on the computer?

    -What antivirus/firewall software you have installed on the computer?

    The document from HP concerning "printer does not maintain the wireless connection.

    http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02817031#N80

    You have tried most the steps mentioned in the document, but please try once more.

    Additionally, make sure that you disable the antivirus and firewall programs just to make sure that these programs do not block the detected printer.

    Note: You must enable the /firewall antivirus as soon as you've done troubleshooting. If this is not the case, your computer will be vulnerable to viruses.

    Let us know if the steps of troubleshooting mentioned in the link will help.

  • Why my guard for computer laptop hp mini 110 3000 kick start-up repair if I turn it on?

    HP mini 110-3000

    OS: Windows 7 32-bit

    Startup Repair always appears when I turn on my laptop, please help me.

    There are a handful of different reasons that could cause this. Are you shut down the computer properly? This may be due to being badly off the computer.

    Thank you

    Sean

  • Windows Indexing running for hours each day, slowing down computer

    Every morning when I start my laptop, the Windows Indexing service starts.  He turns for hours and really slows down my computer while it is running.  I suspect that it is a new construction index every day and not incremental update.

    Last week, I opened administrative services, found indexing service and set its startup type to disabled.  When I go in there now, he said that the service is stopped, but in my status bar windows taskbar system, it is still ongoing.

    I am running Windows XP Professional Svc Pack 3.

    Help, please!

    You probably mean the Windows Desktop Search?  (Which is not the same as Indexing Service).  Go to add/remove programs then uninstall it.

    John

  • Down computer - please help

    My computer crashed and I need to know how to transfer my music files and photos to a new computer, what do I do?

    Hello draven3107,

    1. are you able to start to your old computer after it crashed?

    You'll be able to save the data from your old computer, if you are able to boot to the old computer. If you are not able to boot to the old computer and the hard drive on the old computer broke down, you can to back up data from the old computer. Please let us know the status of your old computer to answer your question better. There are several ways to back up data from the old computer.

    Thank you
    Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

  • Cannot print to a printer wireless HP using Windows 7 computer

    I just purchased and installed a wireless HP 8630 computer and installed on a desktop computer connected to my router as a network printer.  The computer recognizes the printer, like the network, but the computer cannot print to it.  I can ping the printer from the computer and you can see it as a device connected to the network web interface.  When I run HP diagnostics, it allows to print a test page and tells me that all is well.  When I try to print from Word, Outlook, web browser, or anything else the computer it just does not print.  I get no prompt or anything else.  It just says: 0 jobs on hold, then disappears.   I can print from a computer using Windows XP on the network.  I can also print from my ipad with airprint.  I can't just simply print to the Windows 7 computer.  I can copy and same scan, but can't print.

    I read that all the prior tries to fix the problem, but it remains pursists.   Windows 7 computer is 64-bit.  Netgear router N.  Everything is updated.    Any help is appreciated.

    The solution to my problem was install the 8630 driver and software, then driver update for the printer instead of the 8630 8600 driver.

  • Photosmart all-in-one c309g is connected, wireless, print runs, analyze a computer.

    Have you tried all the solutions available several times through doc of hp printer/scan, hp solutions, including resettlement using disk and downloading on site, uninstall, download patch amd, recovering to an earlier date and reboot... reinstalled to get a definitive answer again "HP Photosmart Premiun c309g-m software installation is complete." ", but your device is not connected.   So I'm back to the original problem... I have a good wireless connection, the printer works... will not scan to computer... MSG 'Try Start scan of the computer' if frustrating... is there a solution, I have not tried?   Pls advise. TX

    Windows 7, 64

    Hello-

    I think I know what the problem is. There is a problem with the processor. I will include a link that will solve the problem.

    http://support.HP.com/us-en/document/c03030583

    There is a patch in that you must run.

    After running the patch, you should be able to install the printer.

Maybe you are looking for

  • Several Sites are blocked by saying that the certificate is not valid. I can access each of them with a different browser

    Most of them are sites I visit every day. I downloaded opera and it works fine so I don't think it's a firewall or security problem. Occur after the update. I can't even access the Firefox web site tells me that it isn't valid too.

  • Overworked CPU

    I have a Pavillion dv5-1150us with an Intel Centrino 2, under Vista Home Premium x 64 processor.  As well as, according to Ms. Performance and stability of the processor runs about 42% of the time to rest.  igfxsrvc.exe and, possibly, igfxpers.exe ar

  • What are the things to do and not do purge external hard drive?

    Well, now that I got the big breakthrough on my 1st question in another category, thank you Gerry (England) and Pa bear!  Now on what is probably extremely easy for you. I have an external hard drive and when I got this HP computer about 2 years ago,

  • Z3 has the awkward resolution - how to test my apps

    If the specifications are on: http://ID.BlackBerry.com/smartphones/BlackBerry-Z3-en/specifications.html and it seems in fact z3 will resolution 540 x 960. I know that stunts with QML containers should evolve to the correct resolution, but there are c

  • Cisco IOS IPS in router 2921/k9

    Hi all I have a router from Cisco 2921 box database (error C2921/K9) series with BAse IP IOS (IOS SL-29-IPB-K9) image. I want to activate the function of IOS IPS level on this router now. Based on the Cisco Document, I found that I need to purchase a