Wireless only problem WRT54G2

I have two computers to connect to the router.  We're wired and the other is wireless.  Recently, almost everytime I turn on the PC wireless, is indicates that there is no connection and it does not see my router to connect to.  To operate, I only need to disconnect the power cable from the back of the router for 10 seconds, then plug back in and everything is right with the world again.  The wireless PC will see the router and connect without any problems after that, at least for the current day.  The next day, I'll have to do the same.

Why you happen day now and what I can do to fix this?

I tried to change the channel of 6 to 11, and then to 1.  None of the two changes to help.

Someone have a solution?  Don't forget, I'm not that computer savy, so the answer must be fully explained clearly.

Thank you

If you do not use the router and the modem in the night, you can stop the...

Tags: Linksys Routers

Similar Questions

  • WRT54G2 V1 wireless only mode?

    Hello

    I was wondering if I can put this wireless router from linksys wrt54g2 v1 wireless only.

    Muriel

    In this case you can simply change the WRT54G2 for IP 192.168.1.2 and disable DHCP.  Implement your SSID and what ever wireless security you need.  Then you can connect it to your router with a cat5e cable to ports numbered on the WRT54G2 wired.  That would make her a simple access point.

    Here is a LINK that will show you step by step on how to do it.

  • Windows 7 wireless connection problem

    I just bought a brand new Alienware m17x and all drivers are up to date... .IM with broadcom wireless network adapter. The strange thing is that last night I was on the internet for several hours without any problem using the wireless, but this morning iwas unable to use my wireless internet access. This has happened several times now. Sometimes it says "not connected - no available connections" and sometimes he says "not connected connections are available" when she says, links, I try to connect to the network, but it says "unable to connect to the network. The only time wherever I was able to connect to wireless internet, was when my computer is automatically connected to my wireless network without me having to select the network and attempt to connect. I read things about windows 7, with a mode of "sleeper" for wireless connections or something, and that can be the cause of it and that it is better to turn off or downgrade to xp. I am really frustrated because I am not able to connect wirelessly and I hope you guys can help me find a solution.

     

    Guide to correctly troubleshoot wireless M17x
    with Dell Wireless 1510/Broadcom card
    by Glzmo

    Since many new Alienware M17x all powerful users, especially those who use Windows 7 as operating system there are various problems with their Wi - Fi connection and post threads asking how their difficulty over and over again, I decided to write this guide to show them how to solve these issues properly Commons. The solutions in this guide were created and designed for 64-bit Windows 7, but they may also work in Windows Vista, although these problems were experienced by users of Windows 7 mainly in the past. It could very well be that the problems start occurring in Vista as well with the new drivers and Windows updates.

    I. may not connect to the wireless network and or see the wireless adapter when the Ethernet cable is disconnected
    If you sometimes or always unable to connect to the wireless network, cannot connect to the wireless network when the Ethernet cable is disconnected, unable to connect to a wireless network unless you restart once to get this work and other weird problems to be unable to connect to a wireless network continue with section II. Otherwise, continue with section II..

    Sleep of a.i. Disable on disconnect device
    Some new Nvidia Ethernet drivers have a function called sleep device to disconnect. This is the culprit. Normally, it should only put the card Ethernet to sleep when the cable is disconnected, but it is buggy and thus kill the wireless connection as well.
    Follow these steps to disable this feature on your Ethernet Nvidia card:

    1. open the Device Manager of Windows by pressing Win + break, and then click on Device Manager on the left side.
    2 double-click network adapters.
    3 double click on NVIDIA nForce Networking Controller (Yes, that's indeed wired Ethernet adapter).
    4 click on the Advanced tab.
    5 select sleep on disconnect device.
    6 set the value to disabled.
    7 click OK and wireless should work again (may require a reboot later, but probably not).

    I.b. install different drivers (older) who do not have the device sleeping on disconnect feature.
    The above does not work or if you are not comfortable with these drivers, follow these steps (if step A.i. was successful, you will not need to follow these steps). Take care to create a system restore point before proceeding:
    1. click the Windows Start button in the taskbar.
    2 click on Control Panel.
    3 click on uninstall a program.
    4 in the list, double-click Nvidia drivers.
    5. Mark Remove only the following.
    6 in the box below, only check the Nvidia Network driver.
    7 click Remove and follow the uninstall instructions.
    8 restart the system, if you are prompted to.
    9 download another (older) driver from Nvidia.
    10 install the old driver.
    11 when asked what drivers you want to install, select only the network driver.
    12 follow the installation instructions and restart your system if prompted.

    II. Low or fluctuating wireless connection speeds
    If you have problems with WiFi low connection speeds (such as rates decline over time, the speeds are much lower than they should be, network lag/stutter in online games, loss of light packets, loss of internet connection as LAN works and other weird things) or speeds of fluctuating wildly without apparent reason wireless connection install the version of the Dell Wireless 5.60.18.8 drivers instead of the standard Broadcom drivers. All older drivers will usually cause the speed of connection under normal. Note, however, that you may need to install the driver manually via Device Manager as the pilot was not released for another laptop and is not officially available to the M17x yet - that's why the installer won't work. Take care to create a system restore point before proceeding.
    Here is a step by step how manually install the driver:

    1. download the drivers Dell Wireless 5.60.18.8.
    2 check out the R29128.exe file using an extraction utility like WinRAR or just run it and quit the installation program.
    3. open the Device Manager of Windows by pressing Win + break, and then click on Device Manager on the left side.
    4 double-click network adapters.
    5 double-click the Broadcom 802.11n network adapter entry.
    6 click on the driver tab.
    7 click the button Update driver .
    8 click Browse my computer for driver software.
    9 click on Let me take form a list of drivers for devices on my computer.
    10 click the disk provided .
    11 click Browse.
    12. select the folder that you extracted the drivers you just downloaded in step 1. in.
    13 select the subfolder DRIVER_US (if you are in the United States), DRIVER_JP (if you are in the Japan) or DRIVER_ROW (if you are in the rest of the world), according to the region you are in.
    14 click on the Open button.
    15 click OK.
    16 select the driver that says Dell Wireless 1510 Wireless-N WLAN Mini-Card of the list (you may have to scroll down to see - it presents itself as second to the last in the list for me).
    17 click on the Next button.
    18 you will get a warning that the driver that you are about to install is not compatible with your hardware. Ignore the warning and proceed with the driver installation.
    19 restart your system if prompted to do so.
    20 your new driver should now be properly installed and the speed of your wireless connection in the order.

    III. If all else fails (or you've just had enough of boredom arising from the Dell Wireless 1510/Broadcom card)
    Replace the Dell Wireless 1510 problem with a card half-mini Intel Ultimate N WiFi Link 5300 A/G/N (use the bluetooth as the third antenna antenna or buy you an additional antenna for this). It works very well with the M17x, has better connection speeds to strips of the 2.4 GHz and 5 GHz (this last has speeds really bad on the Broadcom/1510), it has not required to jump through the hoops to make it work properly and much more, it works with standard drivers and Intel maintains their drivers up to date. It is also much more reliable and faster as well, especially on the 5 GHz band, but also on the 2.4 GHz band.

    For more information on the subject of tweaking the settings of your Dell Wireless card, check out the official setting advanced properties: Dell Wireless WLAN Card User Guide.

    I hope that this guide will help you solve your Wi - Fi connection and allow you to enjoy speeds of complete wireless connection on your laptop Alienware M17x.

    Addendum: Quick links in this Guide

    Driver wireless Dell 5.60.18.8 version
    Download the driver for the Mini PCI Dell Wireless 1510 card used in this guide.

    Broadcom 943xx Wireless Driver version 5.60.18.41
    Download the latest Broadcom driver as an alternative to the Dell a little older driver who may or may not solve the problems more. Some have seen more success than with the 5.60.18.8 drivers with it (you need to use the 802.11n network adapter driver rather than at the entrance to Dell Wireless 1510 Wireless-N WLAN Mini Card in step II.15. the guide when you use this driver).

    Setting advanced properties: Dell Wireless WLAN card User Guide
    Reference Dell official Manual/Guide on the various properties Advanced Dell Wireless cards.

    Card Intel Ultimate N WiFi Link 5300 A/G/N Half-Mini
    Link to buy the demi-mini card Intel Ultimate N WiFi Link 5300 A/G/N of dell.com upgrade the crappy Wireless Dell 1510/Broadcom card that comes with the M17x.

    This Guide is a work in progress. I will update as I hear it.

    Feel free to link it in different threads to disseminate information.

  • HP Compaq Presario CQ61-355SQ - wireless driver problem - need help

    Hello

    First of all, I would like to thank all the people posting here some very interesting information on installing the drivers under Win XP. You do a great job!

    I followed the steps described in the guide and I arrived to install most of them (chipset intel, nvidia graphics, realtek network card)

    The only problem I have now is with the WiFi card driver intel. From here: http://h30434.www3.hp.com/t5/Operating-systems-and-software/General-XP-Downgrade-Guide-for-HP-Laptop... I tried this:

    Intel Wireless, (Note: MS Windows Installer 3.1or later, must be installed), here

    and he did not sense that accrued installers ok but nothing happened, in Device Manager, no change has been made. After that I tried the method with 'Have disk', I chose in the list and tried some of the drivers, but in Device Manager it says that the "device cannot start".

    What could try then?

    Help, please

    Is that what you have installed MS Windows Installer 3.1?

    Indeed you have intel wireless, try sp45837, here

  • Wireless network problem: disconnects randomly anywhere between 1 and 4 hours.

    I have a wireless network problem, it disconnects randomly anywhere between 1 h and 4 h. The network consists of a Samsung 4 G hotspot and a Linksys AE1000. The signal strength is excellent, the AE1000 is 1 ft of the computer and 1 ft of the HotSpot.  The computer is a Dell Dimension 2400. Any ideas?

    Hi Jack,

    Problem solved.  I did 2 assumptions about the original problem.  I assumed that the 2 Tech that I spoke made the hurt their product. Battery saver has been activated on the hotspot.

    Thanks again

    Greg

  • wireless connection problems vista adapter usb wireless 802.11 b/g #2

    my HP pc used to connect to my internal wireless, no problem. I know the wep key and had several hours of navigation...
    I move for a year, come back. apparently my PC doesn't connect now... in fact, it won't even connect with a CABLE!
    He repeats to me ' identify with. "
    Well, Vista has been updated since and I've been usng a mobile dongle (at GREAT expense!) to try to update, but now I'm sick of the cost and I need internet access appropriate again!

    Thank you for responding Srinivas
    I don't know the model but it is a HP, three or four years now.
    I had all sorts of messages of "not able to connect" and limmited conectiviy... I'm sure I had a relative at all simply have no connection
    the browser, I would have used that I had connected would be Firefox, but it has yet to get to the point that I was getting nothing. bytes sent might be higher than anything but received nill.
    at the time, I was unable to get ANY connection NET... for all intensive purposes, I've been totally disconnected

    I had tried everything that arises, each suggestion had windows, but it made no difference... even a connection WIRED sitting to 'authenticate '.

    Odly enough, who are seeking to solve a problem with my scandisk is not not be able to access C drive I have run "services.msc".
    looking through everything that might stop the player access, I found that the DHCP Client does not work... I made sure it runs automatically and (because I checked my settings of a few hundred times) the network came as a light!

    I don't know what turned it off because none of the programs I run affected before (I haven't installed any new programs since then be disconnected from the network)

    Thanks for the reply. I hope this information helps in similar cases in the future :)

  • Pavillion G6 2014tx: wireless connectivity problems

    Since the last 2-3 months, my wireless connection does not work correctly. This happened right after that I did the partitioning in the D drive (I don't think this is the main cause). What is happening is that, all of a sudden when internet does not bar shows signs of yellow warning and 'tells' LIMITED ACCESS wireless network. When I try to solve problems, it will give no problem. Then in Device Manager, I tried to uninstall and install again, the internet worked for a while, and still the same problem occurs. When I tried to call to the service center, they told me that I have to buy CDs to retrieve a value of rs500 because I did not these recovery disks. I'm in serious trouble please help...

    I also tried to update latest driver frm net, even if the problem does not get resolved. I also tried to reset the TCPIP in cmd prompt, but it worked for 2-3 days and still the same problem happened...

    Hi there @Parthsagar2010

    Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

    I understand that you are having problems with your wireless connection, and I am happy to help you with this.

    I realize that you mentioned the update of your driver from the internet, but just in case, here is the page drivers. There are several pilots possible depending on what card you have.

    HP Pavilion g6-2014tx Notebook PC - software & drivers

    The following pages are useful for troubleshooting wireless connectivity problems.
    Troubleshooting your wireless network and Internet access (Windows 7)

    In addition, you can watch the the power management of your wireless adapter:
    Turn off the power to the adapter:
    1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
    2. expand the network adapters.
    3. right click on the Ethernet adapter / wireless, and then click Properties.
    4. click on the power management tab.
    5 remove the check mark next to allow the computer to turn off this device to save power.
    6. click on OK.
    7 test cycle.

    Forget the network: (Windows 7)
    1. press start.
    2. tap manage wireless networks, click on the application at the top of the start menu.
    3. right click on the network, and then click on remove network.
    4 confirm the warning by clicking OK.

    Reset TCP/IP on your PC:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
    4 restart your PC and test.

    It can also help to reset the winsock catalog:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
    4 restart your PC and test.

    Reinstall the NIC drivers:
    1. download the drivers from here, but do not run them again.
    2. go to your Start menu/screen and type Device Manager.
    3. expand network adapters.
    4. right click on the wireless adapter and choose uninstall.
    5 install the drivers downloaded in step 1.
    6. restart your PC and test.

    Test an ethernet connection:
    Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

    Test another connection:
    Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

  • Xbox connected to the HDMI port, the only problem being transmitted through the built-in speakers is extremely strong, o change the volume but not succession

    original title:

    Hi all
    I desperately need help. I recently bought a touchscreen "All-in-one" PC "Packard Bell OneTwo M.
    I plugged my Xbox via HDMI port to the rear and the visuals are great, the only problem I have is volume transmitted through the built-in speakers is very strong, I used the keys function keyboard to try to change the volume but no succession, the remote that I have provided with the PC has also volume buttons but them seems to change the volume of my digital TV which is also integrated in.
    Any help is appreciated
    Concerning

    Hello

    You can adjust the volume on your computer by following the steps in the link below:

    Adjust the sound level on your computer
    http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer

    It will be useful.

  • "Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.

    "Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.

    Hi davidd67669685,

    Please provide the exact point of the software & OS installed on your system. Also check if it is there any update available for the software after going through "help > check updates.

    Follow this thread to reset the Acrobat preferences:- How to reset preference settings in format Acrobat.

    You can check after connecting this scanner locally to the system if asked its connected on network & then look for the same thing.

    Please refer to this article:- of the troubleshooting tips for scanning questions when using Acrobat

    If the problem persists ask please check with another user account.

    Kind regards

    Christian

  • Only problem Folios with the latest tools

    Hi guys

    So far what I realized was an exemplary folio and sent directly to Apple.

    Now that I paid for my license, I could try Folio to multi issue, but in the meantime the latest tools now allow the folios of the only issue to create?

    I have been using office tools to drop 11 so far and have avoided acrobat, but it seems that I need to move from and upward, (gulp)

    Then can Bob B, you confirm? or someone at - it really. Thanks guys, to test support for gold, to see if you guys can help out me faster!

    See you soon

    Alistair

    Hi Alistair,.

    Hereby the Single cookbook deliver applications with lower DPS lates (14)

    Create a Folio and make 'production ready '.

    * connection to the Organizer Folio and 'Release' the folio

    * Select the folio and click the 'Export' button, this will give you the ZIP file with all the summary folio, metadata, etc.

    Open Viewer Builder (1.4)

    (If you are not on 1.4, basket of your viewer generator, connect on the digital publishing portal and download the installation program)

    * Select Viewer v14

    * Select 'only problem.

    * Exported Folio-> to the ZIP file that you just created

    NB: Note that create the IPA can take a long time because of the ongoing data transfer

    With greetings

    KlaasJan Tukker

    Adobe Systems Benelux

  • Access only "Local". Wireless connection problem.

    I have a Compaq Presario CQ60-211DX running MS Vista. Yes I know. in any case, I am able to connect to any available WIFI, except my personal home WIFI. If it is directly connected to the ethernet cable, I'll have internet, but once I disconnect it-i lose. My wireless says "Local" only signal I've tried everything. To restart all electronic devices which means my internet to read on the fourms a lot, a lot. I used the Norton removal tool, I did the regedit, MS Vista update, checked for drivers updated and nothing else I can read up. SO PLEASE! Help!.

    Hi RedskinsBnG,

    ·         Did you do changes on the computer before the show?

    ·         You get the error message?

    ·         He has already worked?

    Follow these methods.

    Method 1: Temporarily disable the security software .

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Follow these steps:

    Step 1: Start the computer in safe mode with network and check if the problem persists.

    Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

    Method 3: Follow the steps in the article.

    Solve problems, find wireless networks

    Windows wireless and wired network connection problems

    Reference: wireless networking: frequently asked questions

  • WRT54G2 v1 wireless connection problem

    I installed the router yesterday and after two tests, but I have the internet connection.  I couldn't go wireless then or today.  I tried many times today, and my status says all OK.  I removed the ethernet cable from my PC because he said everything's fine, then lost internet connection!

    When I try to fix wireless according to the Advisor, he said no adapter found wireless!  I have a jack, which is wired for a buzzing doorbell system and wonder if this is the problem.  (I had problems with my magicJack when I moved here and just got a landline phone because of problems with this Jack two weeks ago!)   Could there be problems of incompatibility between the wiring in the plug and the router?  With the exception of the wireless connection everything works fine!  Help, please!

    Thank you!

    I think that your computer has installed wireless network card.

    Contact the vendor of your computer and see if you have a wireless network card installed properly on your computer. If the wireless card is not installed on your computer, you will need to get a wireless adapter.

  • U940 PSU6VA satellite - wireless connectivity problems

    _ * My specifications: * _
    * Model: * Toshiba Ultrabook (Satellite PSU6VA - 00S 002 U940)
    * Operating system: * Windows 8.1 x 64 (upgrade of Windows 8 x 64)
    * Wireless adapter: * Intel Centrino Wireless - N 2200
    * Wireless adapter driver version: * 15.10.0.12 (which is the last for my device)

    I got this Ultrabook since February 2013, and throughout this period, I always had problems with wireless connectivity, even after a factory reset. My wireless icon varies between three States:
    * Internet access
    * Limited (in which case I can't connect to the internet or any other device on the network)
    * Not connected - connections are available (and if I try to connect to the network, it will fail)

    Sometimes my computer would instantly reach the State of "Internet access" at startup and remain in this State. Other times, it would be 'limited' for several minutes after the start of my computer before it finally connected, and even in this case, the connection will drop out every now and then. In the worst case, it would indefinitely remain "Limited" or "not connected", regardless of how many times I reset my adapter wireless or rebooted my computer.

    Until very recently, I always thought that these problems have occurred randomly. However, I noticed recently that I have always a connection perfect, whenever there is no other computers connected wirelessly to my router, and I always have problems more or less when there is at least another computer (or even a smart phone) connected wireless to the router. If there is another computer connected to the router via an Ethernet cable, this causes no problems. It's only wireless connections that interfere with my computer.

    It is only this computer that has these problems; the other computers in my house ever experience these issues, no matter how many computers is online. In addition, my computer is not only these problems with my home router; It has the same problems on the network wireless at my University.

    My question is, how do I fix? Is this a known bug or is my defective wireless adapter? I know that I can connect using an Ethernet cable if possible (I have never problems with Ethernet connections), but this is not always possible at the University.

    Did you remove the old driver Win 8 Intel of the system before you upgrade to version 8.1 to win?
    The old Wlan Intel driver could affect the performance of a Wi - Fi connection.

    The driver update page Win 8.1 says clearly that Intel Wlan driver must be uninstalled and the
    Inbox Windows 8.1 version must be used.
    http://support.Toshiba-tie.co.jp/windows81/drivers/PSU6V_Up_au.htm

  • By Satellite C660/C660D wireless connection problem.

    Suddenly can't connect to the internet using my c660 with a realtek RTL8188CE wireless 802.11n lan, the internet router works fine with other devices.

    The laptop has only the without thread has 'limited access', try to reboot the router has not corrected the problem nor has flushing the DNS cache. The properties of the State of wireless local area network properties that works correctly, I tried also to install the new drivers. The two that toshibas site and another on the realtek site, the driver that is currently installed is the version of the driver "1005.19.420.2011". The laptop is fairly new, purchased in September and there has been no major change in software.

    Any help would be great.

    Thank you

    But WLAN works when you use g standard, right?
    Have you tried to test it with other routers?

    Is there a difference if you test on the block of AC power or battery?

  • Equium L20-197 - wireless connection problems

    Have an old Toshiba laptop Equium L20 - 197, running windows XP Home Edition.

    It contains an Atheros AR5005G wireless network adapter.

    The problem I have is that it will connect to my BT home hub (and says that the connection is excellent), but does not connect to any Web site.

    I added a USB 802.11 wireless adapter g to see if I can get a connection there, and it works very well (even if it is interesting only by using the wireless utility Ralink that comes with it - when I tried with the automatic Windows Wireless Configuration, I had the same problem as before - no internet connection - switched back to the Ralink utility and it works fien again).

    Internal wireless adapter worked fine, but now do not - any suggestion welcome.

    Thank you very much

    Rob

    PS I went to Device Manager and check the updates of pilot, but he told me that he found nothing better than the used version of the driver!

    Hello

    There may be some conflicts between internal WLan card and the new external 802.11 g Wireless USB adapter.

    If not, you should check the configuration of the Atheros AR5005G wireless network adapter.
    In the Device Manager-> card WLan-> properties-> Advanced tab, you can change the WLAN standard 802. 11 (A B G) on the same which is used by the router.

    If the router uses 802.11 G can change this in the Wlan settings too!
    Also check the channel. I put the channel on my router and the wireless network card to 11.

    You can also try to connect to the router without using a WLan encryption. Of course, this should be done only for the test.

    Las, but not the least, update the driver WLan:
    http://APS2.toshiba-tro.de/WLAN/

Maybe you are looking for