Wireless Photosmart B110 printer loses the network by disabling?

Similar Questions

• Photosmart 5510 MacBook Pro with OS 10.9 does not see the printer on the network

  Continues to give the error message that the printer is offline... in the process of installing it says successful implemented, but impossible to find the printer on the network... I has not changed anything, unless there was an automatic update done some part/sometimes recently... it was working fine.  The self-test on the printer wireless past everything!  iMac and iPad see & print!

  Please help me!

  Oh, Yes, it appears in the list of devices printer twice: once HP 5510 series when connected by USB, and once as 77 has 267 with everything what unknown IP connection but State... is one that says offline and cannot be found on the network.

  I tried all the steps listed in the proposals of the forum without success.

  Hi msdok,

  I understand that the printer is appearing offline even if you can print from the iPad and iMac. I see your message that you have already done some troubleshooting, but I'm not sure what you tried. I recommend using the steps below if you don't have it already.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• Photosmart 5520 lies on the network for the first minutes

  Hello.  I bought a Photosmart 5520 in November last year.  It was working fine until the scanner no longer works last week.  Still under warranty and after checking, it was a hardware failure, HP sent a replacement printer.

  Now try to put in place as I had with the previous (who worked with no problem), it seems to play up.  When I start by putting, it connects to my wireless network.  And, throughout all the time, he thinks that it is connected, showing the correct in its window IP address when asked.

  However, each computer attempts to connect to it can initially.  Then, after 3-4 minutes, we get the unavailable destination host.  I get this regardless of how networking is configured (static or dynamic IP addresses).

  For example, when I start the printer first, I can ping the machine no worries

  C:\Users\Ed>ping 192.168.1.9

  192.168.1.9 ping with 32 bytes of data :
  192.168.1.9 response: bytes = 32 time = 2ms TTL = 255
  192.168.1.9 response: bytes = 32 time = 2ms TTL = 255
  192.168.1.9 response: bytes = 32 time = 2ms TTL = 255
  192.168.1.9 response: bytes = 32 time = 2ms TTL = 255

  Ping statistics for 192.168.1.9:
  Packets: Sent = 4, received = 4, lost = 0 (0% loss),
  Time approximate round trip in milli-seconds:
  Minimum = 2ms, Maximum = 2ms, average = 2ms

  And I can access the printer from my browser.  But, wait a few minutes, do nothing, and then ping fails

  C:\Users\Ed>ping 192.168.1.9

  192.168.1.9 ping with 32 bytes of data :
  Reply from 192.168.1.10: Destination unreachable host.
  Reply from 192.168.1.10: Destination unreachable host.
  Reply from 192.168.1.10: Destination unreachable host.
  Reply from 192.168.1.10: Destination unreachable host.

  Ping statistics for 192.168.1.9:
  Packets: Sent = 4, received = 4, lost = 0 (0% loss),

  Note that the ip address assigned to the machine (and what is displayed across on the screen of the printer) is 192.168.1.9.  Ping still displays a reply from 192.168.1.10 (which is actually the IP address of the computer, I connected to via the USB connection).

  I did the normal stuff to turn off the router for 30 seconds, and it makes no difference.  What can I do to keep this work properly?

  Thanks for any help.

  Hello Nicolas and welcome on the HP forums!

  I see you have a Photosmart 5520 which has been recently replaced for a hardware problem and now the replacement seems to have problems with your wireless network. I'm sorry to hear that, but I'll certainly do my best to help

  Because the first printer did not have the same issues, it would be reasonable to assume that this printer is just being meddlesome, (most of the time, anyway ) with which I ask, have you tried to restore default network settings and then reconnect the printer to the wireless network? Otherwise, to restore the default settings of network on the printer the wrench on the top touch right, touch wireless and then scroll down to network by default. Once that is done, try to reconnect the printer to the network and see if it does the same thing.

  If this does not change the behavior of printers on the wireless network, please make sure that it is get the latest Firmware and updates.

  If that isn't also solve the problem, we will have to try a reset of the printer. If the first two suggestions don't help, please read this privacy statement for HP and I will reply with a reset of your forums Inbox.

  Let me know how things are going

• Computer not finding printer on the network

  I have an OfficeJet Pro 8600 Plus with a wireless connection to my home network, E2000 Cisco router. I have install the printer using the software that comes with it. Everything worked fine for several months, but recently, I found that my network computers are randomly impossible to locate the printer on the network. I am also unable randomly ePrint. I noticed that if I power cycle the router, the computer will then find the printer. Now, I am regularly power cycling the router. Should not have these problems, I don't know even where to start asking questions. I'm not having other problems with the router. I connect to the internet OK, see the other computers on the network OK, just could not find the printer. There are usually 3 different computers that are enabled and disabled the network throughout the day (sometimes using the printer, sometimes not).

  What are some of the common issues that could cause this problem? Any suggestions to make the connection to the most reliable printer?

  Hi there, your PC into hibernation should not make a difference but some common router settings to watch out include:

  •Wireless isolation is enabled (won't let not peripheral connected wireless to talk with each other)

• Computer cannot find the printer on the network

  I have a Photosmart D110A and use a router Airport Extreme to print from my PC and iPad.  Until a few days ago, it worked fine but now neither my iPad or PC can find the printer on the network.  When I run the test report of network on the printer, it shows that everything is fine and dandy.  No the guided HP solutions even to get close to solving this riddle... it seems that any questions they discuss involve the printer will not connect to the network.

  OK, so they are both on the network of comments.  Comments network does not allow for communication between devices.

  Open Airport utility, select your airport and click installation manual.  Access to the Internet zone, then DHCP.  What are the two structures IP DHCP for your two airport networks (invited and regular).

  For example, mine is 10.0.1.X for the ordinary and 17.16.42.X for my network of comments.

• LaserJet P2055DN - do not print over the network

  Configure the printer last night as a network printer (which replaces a former 2300dn LJ). It would not print a test page. To verify that the printer was good, I have loaded the drivers on my laptop and connected via usb.  Was able to print a page of test via USB.  Disconnected usb and reconnected power cable. Released and reset the ip address.  Verified the ip address in scathing of the host.   When I ping the printer I usually lose half of the packages.  There are two other HP printers on the network, a P2015dn and a color 2605dn LJ. Ping their IP back to 100% with a ttl = 255. Ping the p2055 produced 4 packets sent, 2 packets received, 2 lost packets, ttl = 64 2 returns.  I changed the printer cables and exchanged the network switch ports (verified the network switch ports by printing to the LJ 2605) with the same result. I can't get the internal web server to mount, or it partially displays or combinations of these.  If this was the old style removable print server as in my lj2300, I could swap out, but it's not like I can do with this model.  When I send a test page to the printer, it displays "printing", the green light on top flashes, the activity on the network card light flashes, but nothing happens. Finally, I get a «this document failed to print "notification on the host, but the printer still says 'printing' and the lights are still flashing.»  Anyone have any ideas?  I think I'm looking at a bad network/print the server maps in the P2055.

  I also had problems printing over the network to the hp p2055dn. There was no problem via USB printing. All the network settings were ok. Can ping, etc...

  Number of days of bickering, finally found that the Config.Security Network should be reset on the physical control of the printer Panel.

  Press Ok on the Control Panel printer--> press down arrow, you get to Setup Menu Network Config--> press Ok--> a number of arrows down you get to Config network. Security--> press Ok--> you have two options - keep or reset--> choose Reset... Network printing should work fine.

• OJ 8500 A910 Pro - iPhone does not see the printer on the network?

  I have my HP OfficeJet Pro 8500 A910 connected to my wireless network.  The printer found the network and now has an IP address.  My iPhone is also connected to the wireless network.  I can see both devices on the router.

  When I walked into photos and try to print a photo, he says to choose a printer.  When I click on choose, I get "No Printers Found.

  Any thoughts?

  Hey k9rescue!

  Sorry to hear that you are having a problem with AirPrint. What iOS version are you running? And what iPhone model do you have?

  Additionally, if you are unsure that your device supports AirPrint, try to turn your bluetooth off and see if the printer appears.

  Let me know if it helps!

• HP LaserJet M1522nf begins to lose the network connection

  Hello! I have HP LaserJet M1522nf and I use it for about 1 year maybe, but since last week, he begins to lose the network connection (ping failed, web interface does not work too). To be correct, the printer is connected directly to the network through an ethernet cable, and the cable is perfectly fine. His work when you turn it on and for the next 5 to 15 minutes, but after that it lost connection (tasks start fails).

  I really like using little aid, some perhaps of advice. Any suggestions?

  Hard reset the router to factory settings and reconfigure your settings.  Pass the cable to a different port on the router.  You said that the cable was good... change anyway.  Try now.

• LaserJet 4050N: cannot connect the printer to the network.

  Hi all

  I recently moved my house, where a new router. My HP LaserJet 4050N was previously connected to my router to another and worked well on the network. However, in my new House and my router (ethernet port connected to the printer) I can't find the printer on the network. I tried to change the IP address, but still when I try to ping, I get the timeout error.

  Help, please.

  Hi Calstar,

  I suggest you uninstall the printer and then reinstall it with the new IP assigned to the printer. Let me know what you find?

• How to replace the missing wireless internet connection icon in the network connections?

  How to replace the missing wireless internet connection icon in the network connections?  My Windows XP installation from the CD on a replacement hard drive did not include this icon to connect to another successful install...

  Hello

  The following article might be useful: How to troubleshoot missing icons in Windows Server 2003 and Windows XP network connections
  http://support.Microsoft.com/kb/825826

• HP 2520HC: install the software of the printer over the network

  Hello

  I use the HP 2520HC series at the office. I use a network connection.

  Printing works fine, however I want to be able to scan as well. I downloaded the printing software, but the only option I choose, connect via USB? The printer is connected to another PC, so this isn't an option.

  Please help me.

  Hello

  such a USB printer allow only all features on a directly connected USB computer.

  Sharing a printer over the network allows sharing of a printer, Windows don't offer any scanner, the sharing feature.

  You can print from another PC to a shared printer, you will not be able to analyze such, to analyze the use of the computer connected directly to your printer via a USB port.

  Kind regards

  Shlomi

• documents of fact pending does not print when printing over the network

  Hello!
  Everyone! I have a problem, my printer don't Tróchez not print when I tried to print a copy using network.
  When I tried to print via USB cable, it works well.
  I don't understand how this problem can be solved.
  Kindly help me.
   
  Printer model: HP LaserJet M1120n MFP

  Hello

  Looks like the printer is not on the network or the ip address may have changed

  Please download and run the doctor for impression scanning HP, it will identify and solve the problem...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=IM-120773-1&cc=us&DLC=en&LC=en&OS=4062&product=3447598&sw_lang=

  or you may need to reconfigure the printer to the network and to reinstall the printer drivers on the computer...

  Although I am an employee of HP, I speak for myself and not for HP.

  * Say thank you by clicking on the "Bravo!" Star"located on the left *.
  Make it easier for others to find solutions, marking my answer to "Accept as Solution" if it solves your problem.

• Need help Kodak 5500 AiO printer over the network.

  I have a kodak 5500 AiO printer. I have vista on all my computers (1 bureau and 3 laptops). I downloaded the sp2 for vista on all computers, after I downloaded sp2 desktop mouse and keyboard froze, I had to uninstall sp2 to make it work. Now the printer on my home network to print or not be discovered by my laptop. I can see the printer on the network to my laptop but I can't connect to it. The printer is on the desktop via a usb cable. I deleted the printer drivers and reinstalled and downloaded the software and drivers for the latest printer.  I need help.

  Thank you

  Phil

  original title: using network printer

  Everyone,

  That's what I had to do to get my printer working once Vista it has messed up. You do the first two steps on the computer to which the printer is connected. The last step that you do for your laptop or you want to connect the printer to the main computer. I hope this helps.

  Hey all,.

  We had this same problem...

  We had to follow the procedure proposed by Drompa...

  > 1) share permissions
  >> 1. In explorer, select C:\windows\system32\spool\PRINTERS
  >> 2. Make a right click, properties
  >> 3. Tab sharing
  >> 4. Advanced sharing
  >> 5. Check "share this folder".
  >> 6. Permissions
  >> 7. Grant everyone full control
  >>
  (> NTFS permissions 2)
  >> 1. In explorer, select C:\windows\system32\spool\printers
  >> 2. Make a right click, properties
  >> 3. Security tab
  >> 4. Edit
  >> 5. Add
  >> 6. Advanced
  >> 7. Find now
  >> 8. Select 'NETWORK '.
  >> 9. Ok
  > 10. Total control of the NETWORK grant

  AND THEN we had to install local printers, using the port trick...

  1. go to 'printers '.
  2. click on "add a printer".
  3 Add a local printer.
  4. "create a new Port.
  5. use the "Local Port" option
  6. on "Enter a Port name" enter: "\\Computername\Printername".

  And if all goes well should do!

  Good luck!

  Credit to Drompa and otherdreams to help out me.

  Phil

• L7780 HP 'add a device' can not detect the printer on the network

  I have a HP OfficeJet Pro L7780 printer and a laptop running Windows 7 Hp. The HP Solution Center has stopped working recently and now gives a message error "HP Solution Center cannot work because your installation of the device is not complete."

  I've uninstalled and reinstalled the software "OJProL7X00_Full_14.exe" and when I go to 'Add a device' it cannot find my printer on the network, even when I enter the IP address.

  I ran "OJ6500vE709_Scrubber_14.exe" - bird 1-2-3-4 and it did make a difference.

  The printer is connected to the network and I can add it as a printer in the window "Devices and printers" window so I can print to it, but without the HP Solution Center software, I can't scan.

  So Windows can detect the printer on the network and when I add the printer in this way, all 4 computers connected to our network can print to it fine.

  HP Print & Scan Doctor detec the printer on the network can. When I run that it is said that the comprehensive software solution for your product is not installed on this computer and when I click on the button 'Install Software', need me just the OJProL7X00_Full_14.exe file. The software seems to install fine but I can't add a device.

  HP printer install wizard for Windows can detec the printer on the network. When I run that it is said that the current full HP software is already installed and drivers seem to be installed correctly. A test page will print perfectly.

  But "Add device HP A" not somehow the printer detec.

  Please notify.

  Hello Impact,

  I see that you spent a lot of time trying to solve the problem of the HP Solution Center not allowing you to scan. Uninstall and install it, rub the software and execution of printing and scanning Dr. / Printer Wizard are all the steps I would have suggested do you.

  I would like you to follow the steps described in this document from HP: the progress bar on the Software Installation stops or stalls, many steps in it you all ready done but please follow the document from top to bottom.

  Before you start to trouble shoot the issue still provides also the computer is not connected to a VPN (Virtual Private Network) and you can access the printers on-Board Web server by entering the printers IP address in Internet Explorer.

  Let me know how this document from HP has helped.

  Thank you

• Install HP Officejet 6500 E709n failure - can't see the printer on the network

  My HP Officejet 6500 E709n refuses to acknowledge that he is already on the network a specific IP address and used by other computers in my house. How can I get this software install to work?  I have to let Windows 7 install its own version, which worked (sort of).  I prefer having the center of solutions for scanning, but the HP install software (full version), in contrast to the MS Windows 7 software, can't find the printer on the network, even when I give the software the exact IP address.

  (Yes, I uninstalled all the pieces I had to uninstall in Control Panel by the NSB instructions re-re-re-install software page.)

  Hi rchimes,

  Thank you for the update. If you are unable to get the problem solved after using the doctor print and Scan follow the steps to scrub the software on the computer and then reinstall it.

  First step: clear temp directory

  1. tap folder in the race or search programs and files of field

  2 Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).

  3. proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-77752-2&CC=US&DLC=en&LC=en&os=4063&Product=3795406&sw_lang=

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know what you find?