Wireless printer has stopped printing

Similar Questions

• Your wireless card has stopped working properly.

  Often, I receive this message "problem reports and solution:
  A problem with your wireless network card

  Your wireless card has stopped working properly.
  There is a network adapter that allows your computer to connect to a wireless network.
  To find out if a version update of your wireless network card is available, contact the manufacturer of your device or computer.

  Even if I get this message that I am able to connect to wireless internet. I checked on the DELL website, and according to them, I have the driver for my Inspiron 1520 then I would like to know how I can stop this annoying message that appear all the time? Is there an updated driver that I don't know?
  The problem refers to my Dell Wireless 1390 WLAN Mini-Card (Driver version 4.170.25.17)

  I would be grateful for any advice.
  Thanks in advance.

  Hi dtw1970,

  While I was researching online error message met that it is a known issue on dell computers and there are a few steps available in the dell Web site.

  Check the link and try the steps mentioned below.
  http://en.community.Dell.com/forums/p/19094058/19217044.aspx#19217044

  You can also try posting your query in the Dell Community, see the link below.
  http://en.community.Dell.com/

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP touchsmart IQ775 Wireless mouse has stopped working.

  Wireless mouse has stopped working. I have a HP Touchsmart IQ775 so I can touch the screen to navigate. did a restore of the system in SafeMode this morning and everything works fine now, but of course, it happens again. Last week, the computer did an update to quicktime which disabled, so I had to completely uninstall quicktime and the mouse immediately worked. looked but could not find that whatever this is updated overnight to re - train the problem this morning. However, the system closed and said 'power system failure driver' cannot know how to fix this, all say updated mouse drivers. is associated it with? This not computer savvy, usually google problems on my ipod touch and looking and staring at me but were not able to understand this. Thanks for all the tips

  Hello

  HP also has their own update so he could be there?

  I would stop automatic driver updates, because they are often older certified and MS is far behind.

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx
  ------------------------------------------------------

  This, to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Try to run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------

  Also check with HP support and forums.

  HP support
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• wireless radio has stopped working - HP PhotoSmart C7280

  My wireless connection has begun to fall suddenly after 2 years.  I made no changes to my system.  I did the 6 # and # 9 and now I can't even all a wireless connection. It just says: my wireless radio does not work.

  Turn the printer off.  Hold it # and 6 keys all on again.  If this does not work, try # and 9 keys.

• sMy Microsoft UDB wireless mouse has stopped working. Can it be repaired or is it just did.

  My Microsoft 3000 wireless optical USB mouse has stopped working.  Can it be repaired or is it just did.

  Hello

  -Don't you make changes to your computer because of which the question began?

  I would recommend that you follow the steps in this article and see if they help.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

• my wireless mouse has stopped working

  I have two mouse Microsoft Wireless in the 3500 Series and 4000 series, I had the 4000 first order works now my 3500 has stopped working can help a whole?

  Hi Richard,

  Here are a few troubleshooting steps that you can try to solve this problem.

  
  Method 1: Run the Microsoft fixit tool and check.

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems

  If the method above does not work, proceed to the next method.

  Method 2: Refer to the suggestions for the following links.
  Troubleshoot a wireless mouse that does not correctly
  http://support.Microsoft.com/kb/321122
  
  Troubleshoot the incidents of the response to the mouse or wireless keyboard
  http://support.Microsoft.com/kb/838398

  If you have additional questions, or if this problem persists, come in and we will be happy to help you.

• All of a sudden my wireless mouse has stopped working. The mouse is on and relatively new.

  Tonight my mouse (Logitech) wireless has stop working.  This happened once, and one of my friends told me to remove the receiver, shut my computer down and put the mouse back in.  However, I don't remember the exact steps he gave me.   I tried several different things, but none seems not to work.

  Hello

  What is the model number of the mouse?

  Method 1:

  I suggest you run the Microsoft fixit tool and check.

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  Support for Microsoft mouse, keyboards, LifeChat, LifeCam & more

  http://support.Microsoft.com/ph/7746

  Method 3:

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows?T1=Tab03

  I would suggest you also contact the Logitech support forum and check.

  http://www.Logitech.com/en-us/support

• Your wireless card has stopped working properly, because a compatible driver is not available for this version of Windows.

  I'm not very tech-savvy... like everything. So I have no idea what to do on this subject, but the problem is very irritating because my wireless just randomly stops working for a short period of time, and it happens quite often. Does anyone have any suggestions?

  My computer told me to go to the website of Buffalo, but I had no idea what to do from there.

  Hi Chadbassett,

  Thank you to contact the community Microsoft and we will be happy to help you with your concern.

  According to the description provided, I understand that you are facing a problem connecting to the wireless network.

  He would be grateful if you can answer this question in order to help you further.

  1. have you made changes on the computer before this problem?

  2. What is the brand and model of your computer?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the windows network troubleshooter, and check if it helps.

  Using the troubleshooter from network in Windows 7: http://windows.microsoft.com/en-US/windows7/Using-the-Network-troubleshooter-in-Windows-7

  Method 2:

  I suggest you to download and install the latest drivers wireless in the factory.

  Note: If the drive is not compatible with windows 7, I recommend you to install the driver software in compatibility mode and check if that helps.

  Windows 7 Compatibility Center: http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx

  Make older programs in this version of Windows: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows

  Reference:

  Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

  We would be more than happy to help you if the steps above did not solve the problem.

• My Apple wireless mouse has stopped working.

  Initially, software system warned me that the batteries are low.  Then it stopped working completely.  I replaced with new(tested good) AA batteries and the mouse still does not connect to my iMac. 10.11.3 is updated software.  My trackpad works ok so the BT Service is always good. I even tried an another Apple wireless mouse and it doesn't connect either.  Can an optical mouse as this just failure?

  A mouse can not just, indeed at the end of his life he cannot do anything else.   I think that your first test is to hold the mouse upside down and check if you have a green light display.    If so, the batteries are probably ok.   If the light flashes, it is most likely, connections are at fault.   Clean the inside of the battery carefully in case there is any residue of previous batteries.   Clean your battery connections and try again.   You could also try your mouse (indeed, two of them) with another computer, maybe a friend.   It doesn't matter if it's a pc.   That will confirm the effectiveness of the mouse.

  Magic Mouse 2 has been designed and developed for El Capitan (10.11.3)... so old mice may not work as well, but I have yet to hear any complaints.

• my microsoft wireless mouse has stopped working, I replaced battery

  my wireless mouse was fine and then stopped working. I changed the batteries and it seemed to work and then arrested again.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/838398

• V470 blue tooth wireless mouse has stopped working

  My Logitech v470 blue tooth mouse worked but stopped.  I went online and downloaded the latest version of the software.  The machine started to work.  I used for1.5 days and on the second day, all of a sudden, it stopped working.  All diagnoses that I know say it works.  The blue light comes on when I press the search button but never connects.  The computer says, the device works, but it does not.  Please help since the pad on my laptop is more sensitive (opens instead of allowing me to do some drag on the desktop) and I need the mouse to work around the touchpad.

  Hello

  read these tutorials on how to set up bluetooth

  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Here are solutions to some common problems with Bluetooth devices.

  You can also try a convenience store for diagnose and fix common problems with equipment and devices running.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  If the above does not correct this contact Logitech

• does that mean I get a message saying that Linksys Wireless Manager has stopped working

  my wireless linksys does work

  Try to install only the drivers for the card and software Linksys is not necessary to resolve this problem, you can uninstall the linksys software and install all the drivers.

• Why my wireless adapter has stop working on my brand new hp pavilion g7-1338dx.

  I ran the wizard network without success and reset my router several times. When I get it to connect, it will stay connected until I stopped. Then when I turn on the computer the next time it doesn, t want yo connect.

  It, s a new brand Paviloion HP g7-1338dx running Windows 7 Premium Home Edition.

  If you need more information, let me know!

  I appreciate all your advice, but I've had a lot a more simple solution. Got a new router from AT & T and Walla, no more problems.

  The only thing I can think to problems with my old router that supported 8032.11 a, b and the new router that supports 802. 11A, through 802.11 g

  Maybe it was the difference in the Protocol of security between the two and try to pass between the two.

• Once I installed the new version of firefox on my mac wireless keyboard has stopped working. Work on everything except firefox.

  running the latest iMac.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• 2.4 GHz HP wireless optical mouse has stopped working

  My wireless mouse has stopped working. I use it on a laptop Windows 8. I used this mouse wireless with this computer for almost a year. All of a sudden it just stopped working. I changed the batteries, so it wasn't the problem. I have uninstalled and reinstalled software and that did not work. Is there anything else I can try before I buy a new mouse? Product # is WT564A.  The model # is FHA-3510. The S/N IS CN1 [personal information]. Product #, model # and s/n is not the computer mouse. Any help would be greatly appreciated.

  Hey there eunash,

  I found three links that could help you, please take a look and try some of the steps:

  Keyboard and wireless mouse troubleshooting

  Mouse, touchpad and keyboard with Windows problems

  .. .and finally, check out the Merita post on this thread, they had some good ideas while explaining what might be going on: http://h30434.www3.hp.com/t5/Other-HP-Consumer-Products-and-Technologies/HP-FHA-3510-mouse-trouble/m-p/2666383/highlight/true#M10473

• Address a problem with your LOCAL WIFI card__Your network card has stopped working properly .___To find out if a version update of your wireless network card is available, contact the manufacturer of your device or computer. __ __

  A problem with your wireless network card Your wireless card has stopped working properly. To see if an updated version of your WLAN card is available

  Hello Jeroen Ratz,

  You should visit your computer manufacturer's website to download all updates for your hardware. Never leave the windows update utility, update your hardware to your computer. Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)