Wireless printer will not print

Similar Questions

• Apple wireless keyboard will not connect to mac mini

  Apple aluminum wireless keyboard will not connect to mac mini. He worked the other day and when you press the power button gives me a green light for a few seconds. I removed from my bluetooth devices and removed the batteries which did nothing. It will not go into the mode of discovery, but he recognizes the keyboard and fails to connect.

  So much for some reason any it plugged into my macbook of brothers.

• SK2061: The wireless keyboard will not connect when the PC is turned on.

  My problem is, when I start the PC, (HPK-15 500, 319NA), wireless (SK2061) keyboard, does not connect. I have to shut down the PC so he can connect (no restart, you must stop it).  Have had the PC for 5 months and it has been published. Not changed the battery makes no difference.

  The internet statement States I shoud push the blue button until the USB receiver flashes. This PC does not have an external USB receiver, I guess it's built in! The mouse works OK.

  Hello @JimCar82,

  I read your post on how the wireless keyboard will not connect when the computer is turned on, and I'd be happy to help you in this case!

  Re-connect your keyboard to your desktop computer wireless, I advise you to follow the steps described in this document on the keyboard and wireless mouse troubleshooting. The USB receiver should be found at the back of the tower.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• Microsoft wireless keyboard will not type the letter 'c' or type the number "3".

  My wireless keyboard will not let me type the let type me the letter 'c' or type the number "3". This works sometimes! Help please!

  This is a Microsoft wireless keyboard 3000 v2.0. It came with a mouse aswell which is working as expected.

  Any ideas? It's so frustrating!

  If you can, try the keyboard on another PC and try a different keyboard on your PC. If the keyboard has the same thing on another PC and another keyboard works well on your PC, it is "side on" hardware failure. Assuming that it is hardware failure, if it is under warranty GET it replaced, it is not you will have to buy a new one.

  Please mark this as useful or response if applicable.

  Tricky

• HP dv6815nr: Wireless Card will not connect to internet

  Hey people, trying to make my old laptop back to semi in working order.  Did a fresh install of Vista, but the wireless card for some reason any will not access the internet, says "local use." Internet works as the other computers in the House are connected on the wireless and when I connect the ethernet, features of connectivity cord.  Crossed and uninstalled/reinstalled the driver.  I have no special security here, just the windows firewall, which I disabled the thought that he could block, but it was not the question.  Other ideas you can come up with that would be great.  I have also included the hardware ID for my wireless card.  Pilots have been taken off this site from hp for my computer model as well.

  PCI\VEN_168C & DEV_001C & SUBSYS_137A103C & REV_01

  Hello:

  You need to install a driver update... the problem is probably your router is too new for the old driver wireless deal.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1 & CC = US & DLC = in & LC = on & JumpID = reg_r1002_usen_c-001_title_r0004

  Go back and activate your firewall if you have not already done so.

• 2nd computer on the wireless network will not get on the internet

  my computer is xp my 2nd computer is vista through the wireless receiver dlink615 and dlink. is on the network but will not go to any willing internet change workgroups the same two as said is on network and said to the internet, but where to go to get on it turns at the local level only

  Hello

  Please make sure that your services are working very well and started, has not stopped.
  1 wireless zero configuration
  2 Server
  3 workstation
  4 Netlogon
  You can find these services, start > run > type services.msc then, a window will open, check for these services if they are running, then there should be no problem with internet.
  If all services are working correctly, then give IP addresses to your PC manually according to the parameters provided by your ISP or registration of your ADSL modem.
  Hope this solve your problem...
  Thank you

• WIRELESS ADAPTER WILL NOT WORK UNLESS THE WIRED CONNECTION IS PRESENT

  PROBLEM: RECENTLY SPEND YOUR DESKTOP OF WIN - XP TO WIN 7 32 BIT AND MY HP LAP TOP VISTA 32, WINDOWS 7, 64 BIT.

  WIRELESS LAPTOP ADAPTER, NOT REARRANGE ITSELF TO USE A WIRELESS NETWORK

  CONNECTION. THE ROUTER AND WIRELESS ADAPTER HAVE THE CORRECT INFORMATION CONFIGURATION AND WORK WELL USING THE WIRED NETWORK. WHEN I MOVE THE NIC WIRELESS WI - FI FAILS.

  INFO WIRELESS ROUTER:

  LINKSYS BRAND: WRT300N V1.1
  BASIC WIRELESS SETTINGS: NETWORK RADIO BAND = AUTO, CHANNEL = MIXED MODE = AUTO, SSID = ACTIVE.
  WIRELESS SECURITY = WPA PERSONAL WITH TKIP ENCRYPTION

  WIRELESS ADAPTER, INTEL (R) WIRELESS WIFI LINK 4965AGN

  HP Pavilion DV 9700, WIN 7 64 bit update for Win Vista 32, NVidia Ge Force 8600 m GS graphic card, Win 7 64 bit.

  WHEN I CLICK ON THE ICON TO ACCESS INTERNET AND CLICK ON THE NETWORK TO CONNECT, THE WINDOWS NETWORK DIAGNOSTIC DIALOGUE BOX SHOWS CONNECTED, BUT FAILS TO COMPLETELY MAKE THE CONNECTION. WATCH THEN RESOLVE THE PROBLEMS, WHICH FAILS AND FINALLY TO INVESTIGATE THE PROBLEMS OF ROUTER OR ACCESS POINT...

  OTHER PEOPLE HAVE THIS PROBLEM, WHEN THEY SWITCH TO WIN 7. BUT THERE WAS NO MIRACLE DOCUMENTED THAT I CAN FIND ON THE WEB. IN THE OTHER FORUMS DISCUSS ISSUES RELATED TO THIS PROBLEM CONGREGATE, THEY PROVIDE NO BUGS. I NEED HELP TO SET UP MY WIRELESS NETWORK ADAPTER TO THE RECONFIGURATION OF THE WIRELESS NETWORK.

  Thank you all who responded and have tried to help me. Before posting, I tried most of the mentioned patches, including upgrading my firmware of the router. In addition, I went to Device Manager and scanned for changes and checked the properties under the Advanced tab of the Wifi link adapter. I tried the update driver and deactivation and activation of the device. None of this has worked.

  Finally, I uninstalled and then reinstalled the Wifi card. It worked. I guess the driver software became corrupt and data of the register of the device had probably need re - install, this is what worked. This seems to happen when upgrading Windows operating systems prior to WIN 7 and later people lose their wifi connection. Then this problem develops.

  It worked for me. I hope this works for others with the same problem.

  Once again I thank you all.

• Wireless settings will not be saved... "an unexpected error has occurred."

  IM equipped for vista in my xpsm1330 and then one day, all of my wireless settings are not saved. I tried to save all my network (wireless settings) manually but I get this message "an unexpected error has occurred." Help?

  Hello

  Was there a change or a new downloads on the computer before it happens?

  Also, did you run a scan for virus since it began? I would start by doing this.

• PC with wireless card will not connect to the login of the user (Windows 7 RC)

  My PC uses a Rosewill (RNX-G300EX) wireless card with the software and drivers of Railink.

  With Windows XP (Pro) PC would connect to my home network and the internet on startup without user logon.  It is important to me because the data that I want to use on the network on this PC, and I don't necessarily want to have a user logged on to do.  I also have immediate internet access to connect remotely with TeamViewer, which worked perfectly with Windows XP.

  Since my switch to Windows 7 RC, I don't get the immediate connection through the wireless card.  It does not connect to the local network or the internet until a user logs on.

  Articles I checked:
  Driver - Microsoft actually already provided an updated driver that were obtained through Windows Update.  The driver for the wireless card should not be a problem.
  Power settings - I checked in advance for the power settings in Windows 7 and made sure that the wireless card has been set 'Maximum Performance '.
  Properties of the device - I have checked the device properties for the wireless card and made sure they were NOT defined to allow the OS to turn it off to save energy.

  I missed some type of parameter which is a novelty for Win7?  My computer with a wired network connection works fine with Win7 and is accessible at startup without user logon.

  First of all, thank you for the Mark test.  But the problem was not to have the connection when a browser is opened.  To open a browser, a user needed to be connected... with a logged-in user, the wireless adapter worked fine.

  Now, to answer my own question for someone else who might read this.

  I sent this message to Rosewill.  They advise that Ralink (spelled correctly this time) had not yet developed a good driver for Windows 7.  Windows Update apparently used a Vista driver and Windows 7 is apparently a bit different... or just Ralink is not cut with Vista either.

  So, I tried a Netgear USB wireless adapter.  BINGO!  The computer automatically start this device.  There is now a network connection to start.  TeamViewer now shows the computer as being online without that person may be connected.

  ANSWER: hardware
  RALink is a failure by juggling the time.  If you are looking to buy an adapter wireless network with a Ralink chipset, don't.  The link that Rosewill support sent me for the Ralink drivers was broken.  The Ralink site shows it as having certificate problems and IE8 does not recommend open it.  They are apparently dropping the ball.

  I'll buy a new wireless network adapter.

• I reset my router, now my two wireless printers will not print wireless.

  I reset my router and now none of my HP printers can print wireless.  They print with a USB key, but the installation program for the Wireless does not detect my wireless network.   I use an iMac and Airport extreme router.

  I have a different brand printer that works wirelessly now.  I don't understand why HP printers attached to the network.  Printers are c4780 and 4500.

  I tried your solution but still could not solve the problem.  I called HP support.  After a few minutes they determined that since it was an old printer and I recently updated my software on the computer and did a upgrade to the router, when I reset the router was not compatible with my printer.  They also suggested that I try with an old computer,.

  So, I ordered a HP OJ8600 at a great price and will move the printer on another computer.

  So Bravo are so your information, even if it was my fault for failing to provide more complete information, and given that the printer works somewhere else and I have a compatible printer on the way, I consider that this problem is solved.

  Thank you very much for your help.  I appreciate it.

• HP Officejet 6500 E709n wireless. Will not print Word documents or text edit.

  I'm connected wireless with an iMac Snow Leopard and MacAir 10.8.2, Mountain Lion 10.6.8.  I have used this system for a year, had no problems printing to date.  I am able to print a .jpg attachment but nothing else, we try to print (from computers) is printed.  I tried to print a Word document as well from a text edit page with no luck.  Two days ago, I was able to print from a Word document - nothing has been changed on the computer or the printer.  I am naïve.

  How is the printer connected?  Would it be a network, what router?  You've restarted the router by pulling its plug momentarily?  You've restarted the printer?

• Re: Wireless connection will not work on my HP M1217NFW

  Hello

  I have the same problem as above. I use Mac OS X, so I can't use HP Print and Scan doctor.

  I followed the instructions at http://support.hp.com/us-en/document/c02680484

  All is well until the next step:

  Mac OS X

  > Wireless network

  > First option: Wireless installation

  > Step 2

  > Second method: Standard connection using a > 10 USB cable. Type your WEP/WPA/WPA2 key in the appropriate field and then click on apply

  The SAP never replies and I get an error in the browser:

  No data received
  Failed to load the Web page because the server sent no data.
  Here are a few suggestions:
  Reload this Web page later.
  Error 324 (net::ERR_EMPTY_RESPONSE): the server has closed the connection without sending any data.

  I tried with several variations (from WPA to WPA2, disable authentication wireless altogether), but the error is the same. I can't get the M1217NFW to connect to my router.

  Please indicate what I can do next.

  To answer my own question - this happens only with Chrome 21.0.1180.57 but not with Safari 5.1.5 (7534.55.3).

• HP Pavilion p6520y (win7) built-in wireless adapter will not detect ANY wireless network.

  HP Pavilion p6520y Desktop on Windows 7 Home Premium

  Error MESSAGE: "DO NOT CONNECTED - NO CONNECTION IS AVAILABLE" (from the tray icon of wireless with X red network connection).

  No changes to the system, in fact, it's brand new. I just want to use my built-in 802.11n Wireless LAN Card to connect to a network including all other PCs (laptops and desktop computers) can see.

  I tried a lot of things: toggle, adapter, adapter to uninstall/install, driver update (RT3090), PC restore/recovery, reset the router, change the configuration of the card (e.g., power management), all no. AVAIL.

  There is a port of type mini co - ax at the back of the tower for an ANTENNA which came with the PC. However, I think that the internal card could still detect a signal from 20 ft away without antenna. Isn't it?

  PROBLEM SOLVED:

  Of course, the last thing I mentioned was the cause. I have set up the office within inches of the wireless router and a signal (albeit low) was detected.

  So I guess the fixing of an antenna (which should have with my PC) will improve the signal reception when the office is further away (say 20 ft, or more). already checked radio shack with no luck.

  In any case, at least, I know what the problem is. Hope this helps someone in a similar scenario... See you soon...

• Wireless network will not automatically connect at startup

  I have Windows 7 Professional.  Whenever I start, I have to click on the wireless icon & enter key code to connect to the net.  When I go to the Network & Sharing Center, active network shows.  When I go on manage wireless networks, active network are not.  When I try to add manually, I enter all the data, and then click Next, I get the notice that access is denied. I have admin rights.. Spoke people w/HP & router without result.  Just need to find the solution that will automatically connect to the internet to start without the need to enter the key code each time I start.  Would appreciate suggestions.

  Open research, open services of type "services.msc".
  Scroll down to "wlan auto config" right click, stop the service.

  Access
  "C:\ProgramData\Microsoft\Wlansvc\ Delete everything in this folder, leaving only a folder called 'profiles' delete everything in the folder"profiles"except for a folder called 'interfaces' delete all 'interfaces' file).

  Restart "wlan auto config" to connect to your wireless network, enter
  your password (make sure that the connection is automatically checked)
   
  Restart your computer to work, your computer will now connect to your network wireless automatically at startup.

• Laptop - 15-an050ca: Wireless project will not be displayed on the smart TV Samsung

  Hello

  First assignment in time!

  I have a Samsung smart TV which has mirror display operation. I also have a smart phone of S6 that connects directly to my TV. Unfortunately I can not for the life of figure me out how to connect my laptop. I followed the instructions to use the projection screen and he finds the TV. I click on the found device and it says its connected but all television broadcasts is "loading" in the upper corner.

  As I said that the phone works if I know the TV works. Y at - it something I am doing wrong by trying to connect to the TV.

  Any help would be really appreciated!

  Thank you!

  Hi @stu70,
  
  Please become a member of the HP's Support Forums. I understand that you have a problem with the connection from the computer to the TV. I'll be happy to help you.

  You can connect to the computer, the TV with an HDMI cable. In the display configuration, you can mirror or extend the screen.

  Here's a site I found that you are tempted to do. It will be useful.

  How to connect a PC to a Samsung Smart Hub

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Intel pro/wireless 2200bg will not connect or is very slow

  I just do a fresh install of xp pro and my intel pro/Wireless 2200bg has no connectivity.  I downloaded new drivers, but nothing works.  I bought an external card of bg and it works perfectly.   I have a thinkpad t43.  All downloads came from levono or intel.  What can I do?

  Hi TimWiegel,

  You can run the Intel® Wireless troubleshooter from this link & check if the problem persists.

  http://www.Intel.com/support/wireless/WLAN/sb/CS-025779.htm

  
  Reference: Why am I not able to connect or stay connected to my Wi - Fi network?

  Hope the helps of information.
  Please post back and we do know.